SITRANS Pressure transmitters and temperature measuring devices Supplement to the Operating Instructions SITRANS P, DS III and SITRANS T series, TF series Product Information Supplement to the Operating Instructions This supplement applies to the following order number: SITRANS P, DS III series: 7MF4***-*****-****-Z SITRANS T, TF series: 7NG313*-*****-Z Service and maintenance, removal, installation WARNING Use of incorrect device parts in potentially explosive environments Devices and their associated device parts are either approved for different types of protection or they do not have explosion protection. There is a danger of explosion if device parts (such as covers) are used for devices with explosion protection that are not expressly suited for this type of protection. If you do not adhere to these guidelines, the test certificates and the manufacturer warranty will become null and void. Use only device parts that have been approved for the respective type of protection in the potentially explosive environment. Covers that are not suited for the "explosion-proof" type of protection are identified as such by a notice label attached to the inside of the cover with "Not Ex d Not SIL". Do not swap device parts unless the manufacturer specifically ensures compatibility of these parts. Siemens AG Industry Sector Postfach 48 48 90026 NURNBERG (c) Siemens 2010 Supplement to the Operating Instructions SITRANS P, DS III and SITRANS T series, TF series A5E03083001-01, 06/2010 1 SITRANS Druckmessumformer und Temperaturmessgerate Erganzung zur Betriebsanleitung SITRANS P, Serie DS III und SITRANS T, Serie TF Produktinformation Erganzung zur Betriebsanleitung Diese Erganzung ist fur folgende Bestellnummern gultig: SITRANS P, Serie DS III: 7MF4***-*****-****-Z SITRANS T, Serie TF: 7NG313*-*****-Z Instandhalten und Warten, Demontage, Montage WARNUNG Verwendung falscher Gerateteile im explosionsgefahrdeten Bereich Gerate und die dazugehorigen Gerateteile sind entweder fur unterschiedliche Zundschutzarten geeignet oder haben keinen Explosionsschutz. Explosionsgefahr besteht, wenn Gerateteile (z. B. Deckel) fur Gerate mit Explosionsschutz verwendet werden, die nicht ausdrucklich fur die entsprechende Zundschutzart geeignet sind. Bei Nichteinhaltung erloschen die Prufbescheinigungen und die Haftung des Herstellers. Setzen Sie im explosionsgefahrdeten Bereich nur Gerateteile ein, die fur die zugelassene Zundschutzart geeignet sind. Fur den Explosionsschutz mit Zundschutzart "Druckfeste Kapselung" ungeeignete Deckel sind z. B. durch ein Hinweisschild im Inneren des Deckels mit "Not Ex d Not SIL" gekennzeichnet. Gerateteile von Geraten durfen nicht untereinander getauscht werden, sofern die Kompatibilitat nicht ausdrucklich durch den Hersteller sichergestellt ist. Siemens AG Industry Sector Postfach 48 48 90026 NURNBERG Erganzung zur Betriebsanleitung SITRANS P, Serie DS III und SITRANS T, Serie TF A5E03083001-01, 06/2010 2 (c) Siemens 2010 A5E03083001-01, 06/2010