TKV CHIP ALUMINUM ELECTROLYTIC CAPACITORS TKV SERIES 105 Low ESR , Lead Free Reflow Soldering. FEATURES Load Life 105 2000 hours. Reflow soldering is available. Available for high density mounting Prescribe ESR value at 100 kHz. RoHS compliance. SPECIFICATIONS Items Characteristics Category Temperature Range -55105 Rated Voltage Range 6.335V.DC 20 20 120Hz Capacitance Tolerance I0.01CV or 3A whichever is greater.(After 2 minutes application of rated voltage) Leakage Current(MAX) ILeakage Current(A) CCapacitance(F) VRated Voltage(V) Rated Voltage 20,120Hz 6.3 10 16 25 35 (V) tan 0.26 0.19 0.16 0.14 0.12 (tan) Dissipation Factor(MAX) After applying rated voltage with rated ripple current for 2000 hours at 105, the capacitors shall meet the following requirements. Endurance Capacitance Change Within 30% of the initially measured value. Dissipation Factor Not more than 200 of the specified value. Leakage Current Not more than the specified value. Rated Voltage 6.3 (V) Z -25 /Z 20 2 Low Temperature Stability Impedance Ratio(MAX) 35 120Hz 10 16 25 2 2 2 2 3 4 3 4 3 3 3 3 Z -40 /Z 20 3 Z -55 /Z 20 4 MULTIPLIER FOR RIPPLE CURRENT MARKING Frequency Coefficient Voltage code Frequency 120 Hz 1k 10k 100k 100150F 0.50 0.80 0.95 1.00 2201800F 0.60 0.85 0.95 1.00 AA 470 CTK Lot No. Rated Voltage (V) Capacitance Voltage code Series Coefficient Rated voltage code Polarity of the terminals PART NUMBER TKV M DxL Rated Voltage Series Capacitance Capacitance Tolerance Option Case Size 6.3 10 16 25 35 j A C E V TKV CHIP ALUMINUM ELECTROLYTIC CAPACITORS DIMENSIONS (mm) L MAX A10.2 C D L A1 B1 C W1 P 8 10.5 8.3 8.3 2.9 0.81.1 3.1 0.3MAX W1 C P B10.2 D0.5MAX 10 10.5 10.3 10.3 3.2 0.81.1 4.5 0.5MAX STANDARD SIZE WV V.DC 6.3 (0J) 10 (1A) 16 (1C) Size DXL(mm), Ripple current(mA r.m.s./105,100kHz), ESR( MAX/20, 100kHz) Cap (F) Size (DXL) Ripple ESR 470 8x10.5 850 0.08 1000 8x10.5 850 0.08 WV V.DC 25 (1E) Cap (F) Size (DXL) Ripple ESR 150 8x10.5 850 0.08 220 8x10.5 850 0.08 330 8x10.5 850 0.08 1500 10x10.5 1190 0.06 1800 10x10.5 850 0.08 470 10x10.5 1190 0.06 330 8x10.5 850 0.08 560 10x10.5 850 0.08 470 8x10.5 850 0.08 100 8x10.5 850 0.08 680 8x10.5 850 0.08 150 8x10.5 850 0.08 1000 10x10.5 1190 0.06 220 8x10.5 850 0.08 1200 10x10.5 850 0.08 330 10x10.5 1190 0.06 330 8x10.5 850 0.08 390 10x10.5 850 0.08 470 8x10.5 850 0.08 680 10x10.5 1190 0.06 820 10x10.5 850 0.08 35 (1V)