3MTM Moisture Barrier Bag Dri-Shield 2000 Product Data Sheet Product Data Sheet 3MTM Moisture Barrier Bag Dri-Shield 2000 This aluminized moisture barrier bag is designed to provide a static safe environment for sensitive electronic devices. The bags are heat sealable and suitable for vacuum packaging. Bags are printed with ESD and moisture warning symbols and a lot code for traceability. Physical Typical Values Testing Method Moisture Vapor Transmission 0.035 grams/100 sq. in./24 hrs.1 Rate (MVTR) MIL-STD-3010C Method 3030 Tensile Strength 7800 PSI, 54 MPa ASTM D882 3M Moisture Barrier Bags Dri-Shield 2000 are manufactured from a laminate of multiple layers of aluminized polyester and polyethylene. Polyester provides puncture resistance. Metal layers are intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of electric field. Puncture Resistance 20 lbs, 89 N MIL-STD-3010C Method 2065 Seal Strength 15 lbs, 66N ASTM D882 Thickness 3.6 mils, .0914 mm +/-15% MIL-STD-3010C Method 1003 Marking Adhesion Pass IPC-TM-650 2.4.1 These bags are tested to meet or exceed certain electrical and physical requirements of ANSI/ESD S541, and to be ANSI/ESD S20.20 program compliant. Bags are RoHS Compliant* and lead-free**. Electrical Typical Values Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 3MTM Moisture Barrier Bag Dri-Shield 2000 11 Surface Resistance - Interior <1x10 ohms ANSI/ESD STM11.11 Surface Resistance Exterior <1x10 ohms ANSI/ESD STM11.11 Static Decay < 2 seconds ETS 406D EMI Attenuation 45 dB 1 to 10 GHz Cleanliness Typical Values Testing Method Silicone Not Detected FTIR Heat Sealing Conditions Typical Values Temperature 300F - 400F, 140C - 204C Time 0.6 - 4.5 seconds Pressure 30 - 70 PSI, 206 - 482 KPa 1 11 Standard deviation of 0.008 grams/100 sq. in./24 hrs. This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program. 3MTM Moisture Barrier Bag Dri-Shield 2000 Product Data Sheet Product Data Sheet 3MTM Moisture Barrier Bag Dri-Shield 2000 Open Top Bag Dimensions (W x L in.) Part No. Dimensions (W x L in.) Part No. Dimensions (W x L in.) Part No. 3x5 70035 6 x 30 700630 12 x 18 7001218 4x6 70046 8 x 10 700810 14 x 30 7001430 4 x 24 700424 8 x 12 700812 15 x 18 7001518 5 x 30 700530 10 x 12 7001012 16 x 18 7001618 6x8 70068 10 x 20 7001020 17 x 19 7001719 6 x 10 700610 10 x 24 7001024 18 x 18 7001818 6 x 24 700624 10 x 30 7001030 18 x 24 7001824 12 x 16 7001216 * Standard sizes stocked for prompt shipment (usually same day) . * Width is measured from inside seam to inside seam. * Length is measured from the top edge to the bottom fold. * Opening is in the "width" dimension. * Custom bag sizes, custom printing and custom hot stamping are available. * Most sizes are packed 100 per case. * Small sizes are packed 500 or 1,000 per case. Custom sizes and printing available. Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset 0 to 0.250 Seal width +/- 0.125 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M is a trademark of 3M Company. All other trademarks are owned by their respective companies. * RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum concentration values ("MCVs") in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This information represents 3M's knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty section. **Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method 3051A/3052. 3 Electronic Solutions Division Static Control Products 926 JR Industrial Drive Sanford, NC 27332-9733 Toll-Free: 866-722-3736 International: 919-718-0000 Email: 3mstaticinfo@mmm.com www.3Mstatic.com Please recycle. Printed in USA. (c) 3M 2013. All rights reserved. 98-0799-1139-6 JHA