Product Data Sheet
3M™ Moisture Barrier Bag Dri-Shield 2000
3M™ Moisture Barrier Bag Dri-Shield 2000
Product Data Sheet
This aluminized moisture barrier bag is designed to provide a static safe environment
for sensitive electronic devices. The bags are heat sealable and suitable for vacuum
packaging. Bags are printed with ESD and moisture warning symbols and a lot code
for traceability.
3M Moisture Barrier Bags Dri-Shield 2000 are manufactured from a laminate of
multiple layers of aluminized polyester and polyethylene. Polyester provides puncture
resistance. Metal layers are intended to provide shielding of Electrostatic Discharge
(ESD) and to help minimize the penetration of electric field.
These bags are tested to meet or exceed certain electrical and physical requirements
of ANSI/ESD S541, and to be ANSI/ESD S20.20 program compliant. Bags are RoHS
Compliant* and lead-free**.
Physical Typical Values Testing Method
Moisture Vapor Transmission
Rate (MVTR)
0.035 grams/100 sq. in./24 hrs.
1
MIL-STD-3010C Method 3030
Tensile Strength
7800 PSI, 54 MPa
ASTM D882
Puncture Resistance
20 lbs, 89 N
MIL-STD-3010C Method 2065
Seal Strength
15 lbs, 66N
ASTM D882
Thickness
3.6 mils, .0914 mm +/-15%
MIL-STD-3010C Method 1003
Marking Adhesion
Pass
IPC-TM-650 2.4.1
Electrical Typical Values Testing Method
ESD Shielding <10 nJ ANSI/ESD STM11.31
Surface Resistance - Interior
<1x10
11
ohms
ANSI/ESD STM11.11
Surface Resistance -
Exterior
<1x10
11
ohms
ANSI/ESD STM11.11
Static Decay
< 2 seconds
ETS 406D
EMI Attenuation
45 dB
1 to 10 GHz
Cleanliness Typical Values Testing Method
Silicone Not Detected FTIR
Heat Sealing Conditions Typical Values
Temperature 300°F - 400°F, 140°C - 204°C
Time
0.6 - 4.5 seconds
Pressure
30 - 70 PSI, 206 - 482 KPa
3M
™
Moisture Barrier Bag
Dri-Shield 2000
1 Standard deviation of 0.008 grams/100 sq. in./24 hrs.
This product is intended for commercial use only. This product is not on the Qualified Product
Listing under the Defense Standardization Program.
Product Data Sheet
3M™ Moisture Barrier Bag Dri-Shield 2000
3M™ Moisture Barrier Bag Dri-Shield 2000
Product Data Sheet
3
Electronic Solutions Division
Static Control Products
926 JR Industrial Drive
Sanford, NC 27332-9733
Toll-Free: 866-722-3736
International: 919-718-0000
Email: 3mstaticinfo@mmm.com
www.3Mstatic.com
Please recycle. Printed in USA.
© 3M 2013. All rights reserved.
98-0799-1139-6 JHA
Important Notice
All statements, technical information, and recommendations related to 3M’s products
are based on information believed to be reliable, but the accuracy or completeness is not
guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability associated with such use. Any
statements related to the product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall have no force or effect unless
expressly agreed upon, in writing, by an authorized ofcer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for one year from the
time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M
product or refund the purchase price of the 3M product. Except where prohibited by law,
3M will not be liable for any indirect, special, incidental or consequential loss or damage
arising from this 3M product, regardless of the legal theory asserted.
3M is a trademark of 3M Company. All other trademarks are owned by their respective companies.
* RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum
concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This
information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive
remedy will be in accordance with the Warranty section.
**Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method
3051A/3052.
• Standard sizes stocked for prompt shipment
(usually same day) .
• Width is measured from inside seam to inside
seam.
• Length is measured from the top edge to the
bottom fold.
• Opening is in the “width” dimension.
• Custom bag sizes, custom printing and custom
hot stamping are available.
• Most sizes are packed 100 per case.
• Small sizes are packed 500 or 1,000 per case.
Tolerance (inches): Width -0, +0.250
Length +/- 0.125 Offset 0 to 0.250
Seal width +/- 0.125
Dimensions
(W x L in.)
Part No. Dimensions
(W x L in.)
Part No. Dimensions
(W x L in.)
Part No.
3 x 5 70035
6 x 30 700630 12 x 18 7001218
4 x 6
70046
8 x 10 700810 14 x 30 7001430
4 x 24
700424
8 x 12 700812 15 x 18 7001518
5 x 30
700530
10 x 12 7001012 16 x 18 7001618
6 x 8 70068 10 x 20 7001020 17 x 19 7001719
6 x 10 700610 10 x 24 7001024 18 x 18 7001818
6 x 24 700624 10 x 30 7001030 18 x 24 7001824
12 x 16 7001216
Custom sizes and printing available.
Open Top Bag
