EvoPort™
The easy way to PCB mount a connector
Innovative Interconnection Solutions
DATA
DATA
Availability
The EvoPort™is currently available for insert
arrangements using contact sizes 20 and 22.
Other options may be available - consult your
sales representative for details.
The EvoPort™includes through holes for connector
to PCB mounting. For retention purposes, four
screws should be fitted through the PCB, EvoPort™
and into the rear flange of the connector,
which is fitted with either an M3 or 4-40UNC
helicoil threaded insert as required.
All EvoPort™headers require ‘EvoPort™ready’
connector termination, which is available on
Deutsch EvoMax™and other filter connectors.
Other connectors can also be provided ‘EvoPort™
ready’ - consult your sales rep for details.
EvoPort™
The Deutsch EvoPort™technology
overcomes the process difficulties associated
with fitting a PCB tail connector to a surface
mount PCB. By using the low profile header
on the PCB, the connector becomes a
removable item. Hand soldering can be
eliminated using the press fit version, which
utilises the proven technology of compliant
pin contacts. For those who want the
benefits of a removable connector, but
require a soldered connection, a PCB Tail
version of the EvoPort™header is available.
Features and Benefits
• Low profile
• Connector becomes reusuable
• Ease of assembly
• Can overcome mixed technology PCB soldering
process issues
• O-ring seal to connector body
• Wash out slots provide for board cleaning
and conformal coating
• Reduced rework costs
• Reduced thermal mass during soldering
• Reduced PCB profile during assembly
EvoPort™ready connector EvoPort™
Customer PCB
Mounting Screws
Termination Options
Two terminations are offered for the EvoPort™
Solder Mount (SM) using PCB tails
Allows the designer to capitalise on the other benefits of
a connector header whilst still using solder processing.
Press Fit (PF) using compliant pin technology
Using Press Fit technology resolves the soldering process
issues associated with mixed technology board design.
Product Range
EVP - EvoPort™
MIL STD Covering Insert Arrangement
01 - MIL - STD - 1560
02 - MIL - STD - 1554
03 - MIL - STD - 1669
Sealing
E - Standard sealing and materials
Insert Arrangment / Planform
XX-XX - replace the XX-XX with the appropiate insert arrangement from the
MIL STD as 5 digits. (i.e. 09 - 98, 15 - 35, 25 - 04)
Termination Type
SM - Solder Mount
PF - Press Fit
Part Number Structure
EVP 01 E 15 - 35 PF
Technical Specifications
Operating temperature range: -65°C to +200°C
Max operating current: 4.5A
Contact plating: gold
Solder Mount
PCB tail diameter: Ø0.62mm
Recommended post plating
PCB hole diameter: Ø1.02mm nominal
Press Fit
Pre-Plated drilled hole diameter: Ø1.15 ± 0.025mm
Post-Plated PCB hole diameter: Ø1.00 +0.09 / -0.06mm
PCB thickness: 2.1 – 3.2mm
Press in force: 90N max
(per contact at min hole dia)
Push out force: 30N min, 50N typ
(per contact at max hole dia)
Assembly note:
Even pressure should be applied to the EvoPort™
during installation. Press tooling should cover the
whole face. It may also be necessary to support the
underside of the PCB during the installation of Press Fit
EvoPort™. Deutsch can provide detailed assembly
suggestions on request including PCB plating material
and thickness requirements.
Detailed product drawings are available from
Deutsch on request.
For more information, technical
assistance or custom solutions:
email filters@deutsch.net
www.deutsch.net
Deutsch© 2010. Information contained within this brochure is subject to change without prior notification.
Literature Code EvoPort 01/10
For your nearest Sales Office visit www.deutsch.net
