DATA EvoPortTM The easy way to PCB mount a connector Innovative Interconnection Solutions DATA EvoPortTM The Deutsch EvoPortTM technology overcomes the process difficulties associated with fitting a PCB tail connector to a surface mount PCB. By using the low profile header on the PCB, the connector becomes a removable item. Hand soldering can be eliminated using the press fit version, which utilises the proven technology of compliant pin contacts. For those who want the benefits of a removable connector, but require a soldered connection, a PCB Tail version of the EvoPortTM header is available. Features and Benefits * Low profile * Connector becomes reusuable * Ease of assembly * Can overcome mixed technology PCB soldering process issues * O-ring seal to connector body * Wash out slots provide for board cleaning and conformal coating * Reduced rework costs * Reduced thermal mass during soldering * Reduced PCB profile during assembly Availability The EvoPortTM is currently available for insert arrangements using contact sizes 20 and 22. Other options may be available - consult your sales representative for details. The EvoPortTM includes through holes for connector to PCB mounting. For retention purposes, four screws should be fitted through the PCB, EvoPortTM and into the rear flange of the connector, which is fitted with either an M3 or 4-40UNC helicoil threaded insert as required. All EvoPortTM headers require `EvoPortTM ready' connector termination, which is available on Deutsch EvoMaxTM and other filter connectors. Other connectors can also be provided `EvoPortTM ready' - consult your sales rep for details. Customer PCB EvoPortTM ready connector EvoPortTM Mounting Screws Termination Options Technical Specifications Two terminations are offered for the EvoPort TM Press Fit (PF) using compliant pin technology Using Press Fit technology resolves the soldering process issues associated with mixed technology board design. Operating temperature range: Max operating current: Contact plating: Solder Mount PCB tail diameter: Recommended post plating PCB hole diameter: -65C to +200C 4.5A gold O0.62mm O1.02mm nominal Press Fit Pre-Plated drilled hole diameter: Post-Plated PCB hole diameter: PCB thickness: Press in force: O1.15 0.025mm O1.00 +0.09 / -0.06mm 2.1 - 3.2mm 90N max (per contact at min hole dia) Solder Mount (SM) using PCB tails Allows the designer to capitalise on the other benefits of a connector header whilst still using solder processing. Push out force: 30N min, 50N typ (per contact at max hole dia) Assembly note: Even pressure should be applied to the EvoPortTM during installation. Press tooling should cover the whole face. It may also be necessary to support the underside of the PCB during the installation of Press Fit EvoPortTM. Deutsch can provide detailed assembly suggestions on request including PCB plating material and thickness requirements. Detailed product drawings are available from Deutsch on request. Part Number Structure EVP Product Range EVP - EvoPortTM MIL STD Covering Insert Arrangement 01 - MIL - STD - 1560 02 - MIL - STD - 1554 03 - MIL - STD - 1669 Sealing E - Standard sealing and materials Insert Arrangment / Planform XX-XX - replace the XX-XX with the appropiate insert arrangement from the MIL STD as 5 digits. (i.e. 09 - 98, 15 - 35, 25 - 04) Termination Type SM - Solder Mount PF - Press Fit 01 E 15 - 35 PF For more information, technical assistance or custom solutions: email filters@deutsch.net For your nearest Sales Office visit www.deutsch.net Deutsch(c) 2010. Information contained within this brochure is subject to change without prior notification. Literature Code EvoPort 01/10 www.deutsch.net