DATA
Availability
The EvoPort™is currently available for insert
arrangements using contact sizes 20 and 22.
Other options may be available - consult your
sales representative for details.
The EvoPort™includes through holes for connector
to PCB mounting. For retention purposes, four
screws should be fitted through the PCB, EvoPort™
and into the rear flange of the connector,
which is fitted with either an M3 or 4-40UNC
helicoil threaded insert as required.
All EvoPort™headers require ‘EvoPort™ready’
connector termination, which is available on
Deutsch EvoMax™and other filter connectors.
Other connectors can also be provided ‘EvoPort™
ready’ - consult your sales rep for details.
EvoPort™
The Deutsch EvoPort™technology
overcomes the process difficulties associated
with fitting a PCB tail connector to a surface
mount PCB. By using the low profile header
on the PCB, the connector becomes a
removable item. Hand soldering can be
eliminated using the press fit version, which
utilises the proven technology of compliant
pin contacts. For those who want the
benefits of a removable connector, but
require a soldered connection, a PCB Tail
version of the EvoPort™header is available.
Features and Benefits
• Low profile
• Connector becomes reusuable
• Ease of assembly
• Can overcome mixed technology PCB soldering
process issues
• O-ring seal to connector body
• Wash out slots provide for board cleaning
and conformal coating
• Reduced rework costs
• Reduced thermal mass during soldering
• Reduced PCB profile during assembly
EvoPort™ready connector EvoPort™
Customer PCB
Mounting Screws