0302 Thick Film Chip Resistor
Standard Grade, Wraparound
GLASS
PASSIVATION
WRAPAROUND
TERMINATIONS 96% ALUMINA CHIP
RESISTOR
FILM
02/08/08
.032 (.030 - .038)
.022 (.020 - .024)
.015 (.010 - .020)
.005 (.002 - .012)
.008 (.003 - .013)
.016 (.012 - .020)
.00069 grams
.032 (.030 - .038)
.022 (.020 - .024)
.015 (.010 - .020)
.005 (.002 - .012)
.008 (.003 - .013)
.016 (.012 - .020)
.00069 grams
.021
PERFORMANCE CHARACTERISTICSPERFORMANCE CHARACTERISTICS
LIFE TEST POWER DERATING
MECHANICAL
Length
Width
Thickness
Top Term
Bottom Term
Gap
Approx. Weight
Length
Width
Thickness
Top Term
Bottom Term
Gap
Approx. Weight
0.81 (0.76 - 0.97)
0.56 (0.51 - 0.61)
0.38 (0.25 - 0.51)
0.13 (0.05 - 0.31)
0.20 (0.08 - 0.33)
0.41 (0.31 - 0.51)
0.81 (0.76 - 0.97)
0.56 (0.51 - 0.61)
0.38 (0.25 - 0.51)
0.13 (0.05 - 0.31)
0.20 (0.08 - 0.33)
0.41 (0.31 - 0.51)
PART NUMBERING
MINIMUM
RECOMMENDED
MOUNTING
PADS
(INCHES)
MINIMUM
RECOMMENDED
MOUNTING
PADS
(INCHES)
.056
.024
.014
Resistance Range
Tolerances (1)
TCR
Thermal Resistance
Maximum Power
Maximum Voltage
Resistance Range
Tolerances (1)
TCR
Thermal Resistance
Maximum Power
Maximum Voltage
1W- W10M
±100, ±200, ±300 ppm
1%, 2%, 5%, 10%
67.7°C/W
40 mW
15 Volts
1W- W10M
±100, ±200, ±300 ppm
1%, 2%, 5%, 10%
67.7°C/W
40 mW
15 Volts
ENVIRONMENTAL PERFORMANCE (1)ENVIRONMENTAL PERFORMANCE (1)
±0.03%
±0.03%
±0.03%
±0.03%
±0.05%
±0.05%
See Chart
±0.03%
±0.03%
±0.03%
±0.03%
±0.05%
±0.05%
See Chart
Thermal Shock
Low Temperature Operation
Short-time Overload
Resistance to Bonding Exposure
Moisture Resistance
High Temperature Exposure
Life Test
Thermal Shock
Low Temperature Operation
Short-time Overload
Resistance to Bonding Exposure
Moisture Resistance
High Temperature Exposure
Life Test
(1)Typical resistance change, test methods and criteria
per MIL-PRF-55342.
(1)Typical resistance change, test methods and criteria
per MIL-PRF-55342.
INCHES MILLIMETERSINCHES MILLIMETERS
CURRENT NOISE
POWER DISSIPATION
TEMPERATURE RISE (°C)
POWER DISSIPATION (WATTS)
fiber epoxy board
ceramic board
“Specifications subject to change without notice.”“Specifications subject to change without notice.”
STATE OF THE ART, INC.STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-17972470 Fox Hill Road, State College, PA 16803-1797
Phone (814) 355-8004 Fax (814) 355-2714Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401Toll Free 1-800-458-3401
www.resistor.com
S0302CPX150J 20-WS 0302 C PX150 J 20 - W
TEMPERATURE CHARACTERISTIC: 10: ±100 ppm 20: ±200 ppm 30: ±300 ppmTEMPERATURE CHARACTERISTIC: 10: ±100 ppm 20: ±200 ppm 30: ±300 ppm
SIZE CODESIZE CODE
GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory)GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory)
PRODUCT DESIGNATION: P: Thick film on aluminaPRODUCT DESIGNATION: P: Thick film on alumina
TERMINATION TYPE: C: Wraparound terminationTERMINATION TYPE: C: Wraparound termination
RESISTANCE VALUE:
Four digits are used for tolerances of 1% or lower, three digits are used above 1%. Leading digits are significant while the last digit
specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6
ohms.
RESISTANCE VALUE:
Four digits are used for tolerances of 1% or lower, three digits are used above 1%. Leading digits are significant while the last digit
specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6
ohms.
TERMINATION FINISH: X: Sn60 over Nickel (Solderable) C: Silver bearing (Epoxy bondable-RoHS) G: Gold (Epoxy bondable-RoHS)TERMINATION FINISH: X: Sn60 over Nickel (Solderable) C: Silver bearing (Epoxy bondable-RoHS) G: Gold (Epoxy bondable-RoHS)
TOLERANCE: F: 1% G: 2% J: 5% K: 10% M: 20%TOLERANCE: F: 1% G: 2% J: 5% K: 10% M: 20%
PACKAGING CODE: W = Waffle Carrier (Default packaging is Bulk)PACKAGING CODE: W = Waffle Carrier (Default packaging is Bulk)
