GPS Active Antenna Module - Magnet Base APAMP-127 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) ESD Sensitive 38.0 X 34.0 X 12mm MSL level: Not Applicable FEATURES: * High Reliability/Sensitivity * Compact Size * Easy to install (magnet base) * ROHS Compliant TYPICAL APPLICATIONS: * Automotive Navigation * Automotive Monitoring * Personal Tracking STANDARD SPECIFICATIONS: Antenna Parameters Center Frequency Bandwidth VSWR at Center Frequency Polarization Model Impedance Gain Operating Temperature Storage Temperature Min. 1574.40 10.0 Typ. 1575.42 Max. 1576.44 Units MHz MHz Note 1.5:1 (Right Hand Circular Polarization) RHCP 50 5 -40 -45 dBic C C +80 +85 (Based on 70x 70mm ground plane) Low Noise Amplifier (LNA) Parameters Center Frequency DC Voltage Gain Out-of-band Rejection (Absolute Value) Output VSWR Noise Figure DC current Min. 1574.40 3.0 25 19 21 Typ. 1575.42 28 Max. 1576.44 5.0 31 7.5 2.0 1.8 9.5 Units MHz Note dB dB dB (+25C 10C) (Fo+100MHZ) (Fo-100MHZ) mA (At 3.0V) Units MHz dBic Note V Overall (Complete module including RF connector) Parameters Center Frequency Gain Output VSWR Impedance ESD Protection ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Min. 1574.40 25 Typ. 1575.42 28 50 Max. 1576.44 31 2.0 8 15 kV kV (Direct discharge) (Air discharge) Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.30.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS Active Antenna Module - Magnet Base APAMP-127 ESD Sensitive RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 38.0 X 34.0 X 12mm ANTENNA'S IMPEDANCE AND RETURN-LOSS CHARACTERISTICS S11: Input VSWR Test condition: 25x25mm ground LNA REFLECTION PROFILE S21: LNA Gain S21=29.04dB Test condition: DC 5.0V S21=29.04dB OUTLINE DRAWING: Top View Side View Parameters L (Cable Length) Antenna RF Cable RF Cable Attenuation PCB RF Connector Shielding Thickness Mounting Type Description 25010cm Dielectric Ceramic RG174 1.3dB/m FR4 FAKRA-C Tinplate 12.8mm Magnet Base Unit:mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.30.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS Active Antenna Module - Magnet Base APAMP-127 ESD Sensitive RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 38.0 X 34.0 X 12mm PRODUCT IMAGE: PACKAGING: Each 475 x 215 x 215 mm size carton includes 100 pieces of antenna. CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.30.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ABRACON: APAMP-127