SPECIFICATION CONTROL DRAWING REV:
A DCR #
D070020 DATE:
FEB 28, 2007
Raychem
Wire and Harnessing Products
300 Constitution Drive
Menlo Park, CA 94025, USA
TITLE: HEXASHIELD ADAPTOR FOR
CODE 40 CONNECTOR
O/NO B 11 ENTRY SIZE A3
PLAIN CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS A RE IN
MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at
any time. Users should evaluate the suitability of the
product for their application.
DOCUMENT NO.
HEX40-AY-YY-11-A3-1
DRAWN:
IRT DATE:
AUG 2003 DCR#:
D070020 FILE:
87002/11-A3 SCALE:
NONE SHEET: 1 OF 3
If this document is printed it becomes uncontrolled. Check for the latest revision.
O RING - SILICONE
STRAIGHT ADAPTOR
-00
1 3 4 2
TYP
øM15 x 1.0 Class 6H
ø22.0 [0.87"] MAX
TYP
TYP
ø22.5 [0.89"] MAX
TYP
25.0 [0.98"]
MAX
13.0 [0.51"]
MAX
26.0 [1.02 "]
MAX
45° ADAPTOR
-45 90° ADAPTOR
-90
17.5 [0.69"]
MAX
30.5 [1.20"]
MAX
© 2007 Tyco El ectronics Corporation. Al l r i g hts reserved
SPECIFICATION CONTROL DRAWING REV:
A DCR #
D070020 DATE:
FEB 28, 2007
Raychem
Wire and Harnessing Products
300 Constitution Drive
Menlo Park, CA 94025, USA
TITLE: HEXASHIELD ADAPTOR FOR
CODE 40 CONNECTOR
O/NO B 11 ENTRY SIZE A3
PLAIN CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS A RE IN
MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at
any time. Users should evaluate the suitability of the
product for their application.
DOCUMENT NO.
HEX40-AY-YY-11-A3-1
DRAWN:
IRT DATE:
AUG 2003 DCR#:
D070020 FILE:
87002/11-A3 SCALE:
NONE SHEET: 2 OF 3
If this document is printed it becomes uncontrolled. Check for the latest revision.
KIT DESCRIPTION
ITEM DESCRIPTION MATERIAL
1 BODY ASSEMBLY ALUMINIUM ALLOY
2 CLAMPING NUT - PLAIN ALUMINIUM ALLOY
3 CONIC RING ALUMINIUM ALLOY
4 STAR - PLAIN ALUMINIUM ALLOY
PART NUMBERING
- PLATING CODE:
B = CADMIUM OLIVE DRAB TO SAE-AMS-QQ-P416
- MATERIAL CODE:
A = ALUMINIUM ALLOY
- CONNECTOR COD E NU MBER
HEX40 A B 00 11 A3 1
C = ELECTROLESS NICKEL TO SAE-AMS-C-26074
HEX40 = MIL-C-38999 SERIES III AND IV
- FERRULE QUANTIT Y CODE
- ORDER NUMBER
- BODY STYLE
- 1 = PLAIN CLAMPING NUT
45 = 45º
90 = 90º
00 = STRAIGHT
APPLICATION
- These adaptors are designed to be mounted on the following connectors:
MIL-C-38999 Series III and IV Shell Size B (11)
- They are qualified to the Raychem specification RB-114, whe n installed on metallic Mil-Specificat ion circular
connectors only.
- They are designed primarily for open wire bundle installation but are also designed to accept Raychem heat shrink
moulded parts where strain relief is required – see illustration.
MO ULDED PART
- Use in conjunction with f errules HET-A-0XX, which are purch ased separate ly. Refer to HET-A-0XX S.C.D. for rel evant
selection details.
SPECIFICATION CONTROL DRAWING REV:
A DCR #
D070020 DATE:
FEB 28, 2007
Raychem
Wire and Harnessing Products
300 Constitution Drive
Menlo Park, CA 94025, USA
TITLE: HEXASHIELD ADAPTOR FOR
CODE 40 CONNECTOR
O/NO B 11 ENTRY SIZE A3
PLAIN CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS A RE IN
MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at
any time. Users should evaluate the suitability of the
product for their application.
DOCUMENT NO.
HEX40-AY-YY-11-A3-1
DRAWN:
IRT DATE:
AUG 2003 DCR#:
D070020 FILE:
87002/11-A3 SCALE:
NONE SHEET: 3 OF 3
If this document is printed it becomes uncontrolled. Check for the latest revision.
INSTALLATION
-See Installation Procedure RPIP-696-04 (straight bodies) or RPIP-696-07 (45º and 90º bodies) for assembly.
-See Installation Procedure RPIP-696-00 for shield termination.
PACKAGING
- All components are supplied in a plastic bag.
NOTES!
1. Assembly is to be permanently marked with Code Identity Number and Part Number.
(e.g. 06090 HEX40-AB-00-11-A3-1)
