3 12 "1 10 9 8 7 6 5 4 3 | 2 | 1 CKT. DIM. A REF. DIM. B REF. (00.64/-0.38) (2.54 +0.05) TYP. SIZE +0.64/-0. an 200? (MM) INCH (MM) INCH A 025/015 400 +,002 14 (5.08) 200 (2.54) 100 497 (NON-ACCUM.) 6 (7.62) 300 (5.08) .200 at 5 REE (2.54 20.05) 8 || (0.16) 400 | (7.62) "300 ee ame 100 +.002 40 || (12.70) 500 (10.16) 400 , eo -0-C- q2 || 15.24) 600 (12.70) 500 | | 14_||_ 7.78) 700 | (15.24) 600 VIMY a co tT | r : , oO pP-O-o- HEH Fa. ei re EL = Ee fing E 46 || (20.32) 800 (17.78) .700 Bre Teen 1 |as_|[122.86) 900 [ (20.32) 800 Hey) et eat LSU Leyte gt UD AR A (1.02 +0.05) 20 || (25.40) 1000 | (22.86) 900 PW INT IWW TN IAIN - 7 040 2.002 22 || (27.94) 4100 | (25.40) 1.000 DIA. TYP. | 24 || G0.48) 1.200 | (27.94) 1.100 L_ 5.08) pep 26 || (33.02) 1300 | (30.48) 1.200 -200 ' RECOMMENDED P.C. BOARD HOLE LAYOUT 28 || (35.56) 1400 | (33.02) 1.300 H | 30 || 38.10) 1500 | (5.56) 1.400 038/05 x 32 || 40.64) 1.600 | (38.10) 1.500 2 10.38)/.015)2/V 34 || (43.18) 1700 | (40.64) 1.600 36 || (45.72) 1800 | (43.18) 1.700 | | 38 || (48.26) 1900 | (45.72) 1.800 a 40 || (50.80) 2.000 | (48.26) 4.900 l D g [42 [5334 2.100 | (50.80) 2.000 | SEE NOTE 5 44 || (55.88) 2.200 | (53.34) 2.100 | _ 46 || (58.42) 2.300 | (55.88) 2.200 i x0 48 || (60.96) 2.400 | (58.42) 2.300 | *. {50 |l 63.50) 2.500 | (60.96) 2.400 | 52 || (66.04) 2.600 | (63.50) 2.500 REF. 54 || (68.58) 2.700 | (66.04) 2.600 F [56 || (71.12) 2.800 | (68.58) 2.700 ( | 58 || (73.66) 2.900 | (71.12) 2.800 j i t 320) 60 || (76.20) 3.000 | (73.66) 2.900 REF | _ Gan FEF. _| 62 |] 78.74 3.400 | (76.20) 3.000 : F : 64 || (81.28) 3.200 | (78.74) 3.100 UE SEE NOTE 5 66 || (83.82) 3.300 | (81.28) 3.200 j E [68 || (66.36) 3.400 | (83.82) 3.300 70 || 88.907 | 3500 | 8636 [3.400 NOTES: FOr OZR 72. || (91.44) 3.600 | (88.90) 3.500 4. MATERIAL: 74 || (93.98) 3.700 | (91.44) 3.600 , PIN. COPPER ALLOY 3. PRODUCT SPECIFICATION: NONE 76 || (96.52) 3.800 | (93.98) 3.700 WAFER: GLASS FILLED LCP (LIQUID CRYSTAL POLYMER, 4. PACKAGING INFORMATION: (UNLESS OTHERWISE NOTED IN TABLES) 78 (99,06) 3.900 (96.52) 3.800 UL 94V-0, COLOR: BLACK. BULK PACK PER PK-70873-0353. 9 G6 60 Il vo106) Z000 | 169.06) 3500 2. FINISH: 5. MEASURE POINT FOR PLATING THICKNESS. = 1 1 : ; 3 D Fez |f 104.14) 4.100 | (101.06) 4.000 TIN = (0.00380)/.000150 MINIMUM TIN PLATE 6. FOR ASSEMBLIES WITH VOIDED PINS, REFER TO DRAWING NO. a4 | 06.68) | 4200 1 04.147 | 4100 OVER (0.00127)/,000050 MINIMUM NICKEL PLATE. SDA-70280-5001-8999. 7/ G3 110925) 1406-68) : 45 GOLD = (0.00038)/.000015 MINIMUM GOLD PLATE IN SELECT AREA, 7. PIN PUSHOUT FORCE: 3 POUNDS MINIMUM IN EITHER DIRECTION. 86 : 4,300 : 4.200 (0.00190)/.000075 MINIMUM TIN PLATE IN SELECT AREA, 8. FOR ILLUSTRATION PURPOSES, 20 (DUAL 10) CIRCUIT SIZE IS SHOWN. 6 | G3 Tes || 1176) 4.400 | (109.22) | 4.300 30 GOLD OVER (0.007271/,000050 MINIMUM NICKEL PLATE OVERALL 9. PINS MEET SOLDERABILITY SPEC SMES-152. ABSENCE OF PLATING 5 | a3 90 || (114.30) 4500 | (111.76) 4.400 = (0! 4 A AREA, PERMISSIBLE AT BANDOLIER PIN FAYING SURFACE. 92 |_6.84) | 4600 | (1430) | 4500 oe OCCU CC MINIMUM ICED Boke Ov SSA L. (APPROXIMATELY (0.64)/.025 INCH LONG BY (0.15)/.006 INCH WIDE AT 4 | @ c [94 [| 9.38) [4.700 | 16.84) | 4.600 GT15 = (0,00038)/,000015 MINIMUM GOLD PLATE IN SELECT AREA, 2 LOCATIONS) 3 | Ga 96 (121.92) 7.800 (119.38) %.700 (0.00254)/.000100 MINIMUM TIN PLATE IN SELECT AREA, 10. PARTS CONFORM TO CLASS B OF COSMETIC SPECIFICATION 98 lt eoaze 1 2 g00 1 ata B00 OVER (0.00127)/.000050 MINIMUM NICKEL PLATE OVERALL. PS-45499-002 2/1 G3 ___ 100 |[127.00) [| 5.000 | 124.46) | 4.900 THE PRIMARY SHIPPING CARTON WILL BE LABELED "COMPLIANT TO 1 | Ge RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX Il OF DIRECTIVE 2000/53/EC. CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD PLATING. SHT.|REV. st ma Ss aS QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS: THIRD ANGLE B Wy SSS) |sympors| (UNLESS SPECIFIED) MM/IN 41 INCH Od PROJECTION 7 s 3 se mm INCH DRAWN BY DATE TITLE SONS ZI-0 [7 PLAcESHE---_ [#--- SMR 04/19/1993 SALES ASSY-HIGH TEMP. 82 E 3 PLACES|>-> 14.005 [CHECKED BY DATE DUAL ROW WAFER W/BREAK- RS 8_/E\\/=0 [2 PLacesi0.73_[+.01 OFF OPT. .025 SQ PINS zoszey 1PLACE [0.25 |+--- APPROVED BY DATE ESgE= AYCIOCESc 04/19/1993 (21% MOLEX INCORPORATED A a S 258 MATERIAL NO. DOCUMENT NO. SHEET NO. Q le 56 DRAFT WHERE APPLICABLE] SEE TABLE SDA-70280-0001-4000 10F 9 mG <I _ WITHIN RSs SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX G6 wu INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_ME_T| 12 " 10 9 8 | 7 5 4 Rev. E 2006/04/15 | 6 3 2 | 1 3 ENGINEERING AW70280- -0001/-0040 -0041/-0080 -0081/-0120 -0121/-0160 -0161/-0200 -0201/-0240 -0241/-0280 "2 RELEASE FOR ACTURE REM. REM. REM. REM. REM. REM. REM. " 10 E REF. (2.72) 107 (2.72) 107 (2.72) 107 (2.79) 110 10 10 (3.94) 155 437 447 (11.10) 437 (13.21) 520 (13.21) 520 (13.21) 520 (12.32) 485 7 6 5 4 3 2 1 C CONNECTOR END PLATING | P.C. BOARD END PLATING NORE AT ERO NEE Cae D F (UNLESS OTHERWISE O10 TYPE | MEAS. TYPE | Meas. SPECFIED BELOW) (6.10) (2.54) (127) 240 TIN 100 TIN 050 (6.10) (2.54) (1.27) 240 15 GOLD | 409 TIN 050 6.10) 254) 127) 240 30 GOLD] 19g TIN 050 8.13) 457) t127) 320 TIN 180 TIN 050 8.13) 5 cop) 57 27) 320 180 TIN 050 (813) (457) 127) 320 30 GOLD | 489 TIN 050 (6.10) (254) 127) 240 30 GOLD] 199 TIN 050 CKTS {EDP NUMBER| ENG NUMBER | EDP NUMBER] ENG NUMBER |EDP NUMBER} ENG NUMBER {EDP NUMBER| ENG NUMBER }EDP NUMBER | ENG NUMBER {EDP NUMBER| ENG NUMBER }|EDP NUMBER| ENG NUMBER | CKTS tb_frame_C_P_ME_ Rev. E 2006/04/15 " 10 TE DIMENSIONS NO: UCP2007-1440 QUALITY] GENERAL TOLERANCES THIRD. ANGLE (UNLESS SPECIFIED) MM/IN INCH od PROJECTION 1993/04/41 SALES ASSY-HIGH TEMP. DUAL ROW WAFER W/BREAK- 2006/12 2007/04/ 2006/12/ DESCRIPTION 1999/04/4 MOLEX INCORPORATED - 2 OF 8 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX C INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 7 6 5 4 3 2 1 DRWN:PRI DDER CHKD:ADERR