XHP35A-H0-0000-0D0UA40E5 - Cree, Inc.

Product family data sheet

EasyWhite® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered

trademarks of UL LLC.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

WWW.CREE.COM/XLAMP

CLD-DS130 REV 1E

Cree® XLamp® XHP35 LEDs

PRODUCT DESCRIPTION

The XLamp® XHP35 LED brings the

performance of Cree’s Extreme High

Power LEDs to the XP footprint, setting a

new standard for performance delivered

by a 3.45 x 3.45 mm LED. Leveraging the

breakthrough 12-V monolithic power die

built on Cree’s innovative architecture and

uniquely enabled by the SC5 Technology™

Platform, the XHP35 LED allows the

use of readily available cost--optimized

drivers to unleash the capabilities of

Cree’s high-power LEDs. Available in both

high-density and high-intensity versions,

the XHP35 LED is application optimized

to enable new designs and radically lower

system costs.

FEATURES

• Available in white in high-density and

high-intensity versions for design

exibility

• XHP35 High Intensity LED is

optimized to deliver maximum

candela through secondary optics

• Available in 5-step EasyWhite® bins

at 2700K to 5700K CCT and 3-step

EasyWhite bins at 2700K to 3500K

CCT

• Available in ANSI white bins at

2700K to 7000K CCT

• Available in standard, 70-, 80-, 85-

and 90-minimum CRI options

• Binned at 85°C

• Maximum drive current: 1050mA

• Low thermal resistance: 1.8°C/W

• Wide viewing angle: 115° for high

intensity, 125° for high density

• Unlimited oor life at

≤ 30ºC/85% RH

• Reow solderable - JEDEC

J-STD-020C

• RoHS and REACh compliant

• UL® recognized component

(E349212)

TABLE OF CONTENTS

Characteristics ..............................................2

Flux Characteristics, High Density

EasyWhite® Order Codes and Bins ...............3

Flux Characteristics, High Density ANSI

White Order Codes and Bins ........................5

Flux Characteristics, High Intensity

EasyWhite® Order Codes and Bins ...............8

Flux Characteristics, High Intensity ANSI

White Order Codes and Bins ..................... 11

Relative Spectral Power Distribution ........ 15

Relative Flux vs. Junction Temperature .... 15

Electrical Characteristics ........................... 16

Relative Flux vs. Current ............................ 16

Relative Chromaticity vs. Current .............. 17

Relative Chromaticity vs. Temperature ..... 18

Typical Spatial Distribution ........................ 19

Thermal Design .......................................... 20

Performance Groups – Luminous Flux..... 20

Performance Groups – Chromaticity ........ 21

Cree’s EasyWhite® Chromaticity Regions

Plotted on the 1931 CIE Curve .................. 24

Cree’s Standard Cool White Kits Plotted

on ANSI Standard Chromaticity Regions .. 27

Cree’s Standard Warm and Neutral White

Kits Plotted on ANSI Standard

Chromaticity Regions ................................ 28

Bin and Order Code Formats ..................... 29

Reow Soldering Characteristics .............. 30

Notes .......................................................... 31

Mechanical Dimensions ............................ 33

Tape and Reel ............................................. 35

Packaging ................................................... 37

XHP35 High Density LED XHP35 High Intensity LED

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

2

XLamp® XHp35 LED

CHARACTERISTICS

Characteristics Unit Minimum Typical Maximum

Thermal resistance, junction to solder point °C/W 1.8

Viewing angle (FWHM) - High Density degrees 125

Viewing angle (FWHM) - High Intensity degrees 115

Temperature coefcient of voltage mV/°C -8

ESD withstand voltage (HBM per Mil-Std-883D) V 8000

DC forward current mA 1050

Reverse voltage V -5

Forward voltage (@ 350mA, 85°C) V 11.3 11.9

LED junction temperature °C 150

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

3

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

FLUX CHARACTERISTICS, HIGH DENSITY EASYWHITE® ORDER CODES AND BINS (TJ

The following table provides order codes for XLamp XHP35 High Density LEDs. For a complete description of how the ux and chromaticity

groups are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).

Nominal

CCT

CRI Minimum Luminous Flux

 3-Step 5-Step

Min Typ Group 





 Group Order Code Group Order Code

5700K

70

E4 635 706

57E

XHP35A-00-0000-0D0BE457E

E2 590 656 XHP35A-00-0000-0D0BE257E

D4 550 612 XHP35A-00-0000-0D0BD457E

80

D4 550 612

57E

XHP35A-00-0000-0D0HD457E

D2 510 567 XHP35A-00-0000-0D0HD257E

90

C4 475 528

57E

XHP35A-00-0000-0D0UC457E

C2 440 489 XHP35A-00-0000-0D0UC257E

B4 410 456 XHP35A-00-0000-0D0UB457E

5000K

70

E4 635 706

50E

XHP35A-00-0000-0D0BE450E

E2 590 656 XHP35A-00-0000-0D0BE250E

D4 550 612 XHP35A-00-0000-0D0BD450E

80

D4 550 612

50E

XHP35A-00-0000-0D0HD450E

D2 510 567 XHP35A-00-0000-0D0HD250E

90

C4 475 528

50E

XHP35A-00-0000-0D0UC450E

C2 440 489 XHP35A-00-0000-0D0UC250E

B4 410 456 XHP35A-00-0000-0D0UB450E

4500K

70

E2 590 656

45E

XHP35A-00-0000-0D0BE245E

D4 550 612 XHP35A-00-0000-0D0BD445E

80

D4 550 612

45E

XHP35A-00-0000-0D0HD445E

D2 510 567 XHP35A-00-0000-0D0HD245E

90

C2 440 489

45E

XHP35A-00-0000-0D0UC245E

B4 410 456 XHP35A-00-0000-0D0UB445E

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

4

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

Nominal

CCT

CRI Minimum Luminous Flux

 3-Step 5-Step

Min Typ Group 





 Group Order Code Group Order Code

4000K

70

E2 590 656

40E

XHP35A-00-0000-0D0BE240E

D4 550 612 XHP35A-00-0000-0D0BD440E

D2 510 567 XHP35A-00-0000-0D0BD240E

80

D4 550 612

40E

XHP35A-00-0000-0D0HD440E

D2 510 567 XHP35A-00-0000-0D0HD240E

90

C2 440 489

40E

XHP35A-00-0000-0D0UC240E

B4 410 456 XHP35A-00-0000-0D0UB440E

3500K

70

E2 590 656

35E

XHP35A-00-0000-0D0BE235E

D4 550 612 XHP35A-00-0000-0D0BD435E

D2 510 567 XHP35A-00-0000-0D0BD235E

80

D4 550 612

35G

XHP35A-00-0000-0D0HD435G

35E

XHP35A-00-0000-0D0HD435E

D2 510 567 XHP35A-00-0000-0D0HD235G XHP35A-00-0000-0D0HD235E

C4 475 528 XHP35A-00-0000-0D0HC435G XHP35A-00-0000-0D0HC435E

90

C2 440 489

35G

XHP35A-00-0000-0D0UC235G

35E

XHP35A-00-0000-0D0UC235E

B4 410 456 XHP35A-00-0000-0D0UB435G XHP35A-00-0000-0D0UB435E

3000K

70

D4 550 612

30E

XHP35A-00-0000-0D0BD430E

D2 510 567 XHP35A-00-0000-0D0BD230E

80

D2 510 567

30G

XHP35A-00-0000-0D0HD230G

30E

XHP35A-00-0000-0D0HD230E

C4 475 528 XHP35A-00-0000-0D0HC430G XHP35A-00-0000-0D0HC430E

90

C2 440 489

30G

XHP35A-00-0000-0D0UC230G

30E

XHP35A-00-0000-0D0UC230E

B4 410 456 XHP35A-00-0000-0D0UB430G XHP35A-00-0000-0D0UB430E

B2 380 423 XHP35A-00-0000-0D0UB230G XHP35A-00-0000-0D0UB230E

2700K

80

C4 475 528

27G

XHP35A-00-0000-0D0HC427G

27E

XHP35A-00-0000-0D0HC427E

C2 440 489 XHP35A-00-0000-0D0HC227G XHP35A-00-0000-0D0HC227E

90

B4 410 456

27G

XHP35A-00-0000-0D0UB427G

27E

XHP35A-00-0000-0D0UB427E

B2 380 423 XHP35A-00-0000-0D0UB227G XHP35A-00-0000-0D0UB227E

FLUX CHARACTERISTICS, HIGH DENSITY EASYWHITE® ORDER CODES AND BINS (TJ

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

5

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

FLUX CHARACTERISTICS, HIGH DENSITY ANSI WHITE ORDER CODES AND BINS (TJ

The following table provides order codes for XLamp XHP35 High Density LEDs. For a complete description of how the ux and chromaticity

groups are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).

Nomimal

CCT Chromaticity Regions

CRI Minimum Luminous Flux



Order Code

Min Typ Group 







7000K

0A, 0B, 0C, 0D,

0R, 0S, 0T, 0U,

1A, 1B, 1C, 1D,

1R, 1S, 1T, 1U

0 68

E4 635 706 XHP35A-00-0000-0D00E40DT

E2 590 656 XHP35A-00-0000-0D00E20DT

D4 550 612 XHP35A-00-0000-0D00D40DT

70

E4 635 706 XHP35A-00-0000-0D0BE40DT

E2 590 656 XHP35A-00-0000-0D0BE20DT

D4 550 612 XHP35A-00-0000-0D0BD40DT

80 D4 550 612 XHP35A-00-0000-0D0HD40DT

D2 510 567 XHP35A-00-0000-0D0HD20DT

90

C4 475 528 XHP35A-00-0000-0D0UC40DT

C2 440 489 XHP35A-00-0000-0D0UC20DT

B4 410 456 XHP35A-00-0000-0D0UB40DT

6500K 1A, 1B, 1C, 1D

0 68

E4 635 706 XHP35A-00-0000-0D00E40E1

E2 590 656 XHP35A-00-0000-0D00E20E1

D4 550 612 XHP35A-00-0000-0D00D40E1

70

E4 635 706 XHP35A-00-0000-0D0BE40E1

E2 590 656 XHP35A-00-0000-0D0BE20E1

D4 550 612 XHP35A-00-0000-0D0BD40E1

80 D4 550 612 XHP35A-00-0000-0D0HD40E1

D2 510 567 XHP35A-00-0000-0D0HD20E1

90

C4 475 528 XHP35A-00-0000-0D0UC40E1

C2 440 489 XHP35A-00-0000-0D0UC20E1

B4 410 456 XHP35A-00-0000-0D0UB40E1

6000K

1A, 1B, 1C, 1D,

1R, 1S, 1T, 1U,

2A, 2B, 2C, 2D,

2R, 2S, 2T, 2U

0 68

E4 635 706 XHP35A-00-0000-0D00E40DV

E2 590 656 XHP35A-00-0000-0D00E20DV

D4 550 612 XHP35A-00-0000-0D00D40DV

70

E4 635 706 XHP35A-00-0000-0D0BE40DV

E2 590 656 XHP35A-00-0000-0D0BE20DV

D4 550 612 XHP35A-00-0000-0D0BD40DV

80 D4 550 612 XHP35A-00-0000-0D0HD40DV

D2 510 567 XHP35A-00-0000-0D0HD20DV

90

C4 475 528 XHP35A-00-0000-0D0UC40DV

C2 440 489 XHP35A-00-0000-0D0UC20DV

B4 410 456 XHP35A-00-0000-0D0UB40DV

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

6

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

Nomimal

CCT Chromaticity Regions

CRI Minimum Luminous Flux



Order Code

Min Typ Group 







5700K 2A, 2B, 2C, 2D

0 68

E4 635 706 XHP35A-00-0000-0D00E40E2

E2 590 656 XHP35A-00-0000-0D00E20E2

D4 550 612 XHP35A-00-0000-0D00D40E2

70

E4 635 706 XHP35A-00-0000-0D0BE40E2

E2 590 656 XHP35A-00-0000-0D0BE20E2

D4 550 612 XHP35A-00-0000-0D0BD40E2

80 D4 550 612 XHP35A-00-0000-0D0HD40E2

D2 510 567 XHP35A-00-0000-0D0HD20E2

90

C4 475 528 XHP35A-00-0000-0D0UC40E2

C2 440 489 XHP35A-00-0000-0D0UC20E2

B4 410 456 XHP35A-00-0000-0D0UB40E2

5000K 3A, 3B, 3C, 3D

0 68

E4 635 706 XHP35A-00-0000-0D00E40E3

E2 590 656 XHP35A-00-0000-0D00E20E3

D4 550 612 XHP35A-00-0000-0D00D40E3

70

E4 635 706 XHP35A-00-0000-0D0BE40E3

E2 590 656 XHP35A-00-0000-0D0BE20E3

D4 550 612 XHP35A-00-0000-0D0BD40E3

80 D4 550 612 XHP35A-00-0000-0D0HD40E3

D2 510 567 XHP35A-00-0000-0D0HD20E3

90

C4 475 528 XHP35A-00-0000-0D0UC40E3

C2 440 489 XHP35A-00-0000-0D0UC20E3

B4 410 456 XHP35A-00-0000-0D0UB40E3

4500K 4A, 4B, 4C, 4D

0 68 E2 590 656 XHP35A-00-0000-0D00E20E4

D4 550 612 XHP35A-00-0000-0D00D40E4

70 E2 590 656 XHP35A-00-0000-0D0BE20E4

D4 550 612 XHP35A-00-0000-0D0BD40E4

80 D4 550 612 XHP35A-00-0000-0D0HD40E4

D2 510 567 XHP35A-00-0000-0D0HD20E4

90

C4 475 528 XHP35A-00-0000-0D0UC40E4

C2 440 489 XHP35A-00-0000-0D0UC20E4

B4 410 456 XHP35A-00-0000-0D0UB40E4

FLUX CHARACTERISTICS, HIGH DENSITY ANSI ORDER CODES AND BINS (TJ

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

7

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

Nomimal

CCT Chromaticity Regions

CRI Minimum Luminous Flux



Order Code

Min Typ Group 







4000K 5A, 5B, 5C, 5D

0 68

E2 590 656 XHP35A-00-0000-0D00E20E5

D4 550 612 XHP35A-00-0000-0D00D40E5

D2 510 567 XHP35A-00-0000-0D00D20E5

70

E2 590 656 XHP35A-00-0000-0D0BE20E5

D4 550 612 XHP35A-00-0000-0D0BD40E5

D2 510 567 XHP35A-00-0000-0D0BD20E5

80 D4 550 612 XHP35A-00-0000-0D0HD40E5

D2 510 567 XHP35A-00-0000-0D0HD20E5

90 C2 440 489 XHP35A-00-0000-0D0UC20E5

B4 410 456 XHP35A-00-0000-0D0UB40E5

3500K 6A, 6B, 6C, 6D

70

E2 590 656 XHP35A-00-0000-0D0BE20E6

D4 550 612 XHP35A-00-0000-0D0BD40E6

D2 510 567 XHP35A-00-0000-0D0BD20E6

80

D4 550 612 XHP35A-00-0000-0D0HD40E6

D2 510 567 XHP35A-00-0000-0D0HD20E6

C4 475 528 XHP35A-00-0000-0D0HC40E6

90 C2 440 489 XHP35A-00-0000-0D0UC20E6

B4 410 456 XHP35A-00-0000-0D0UB40E6

3000K 7A, 7B, 7C, 7D

70 D4 550 612 XHP35A-00-0000-0D0BD40E7

D2 510 567 XHP35A-00-0000-0D0BD20E7

80 D2 510 567 XHP35A-00-0000-0D0HD20E7

C4 475 528 XHP35A-00-0000-0D0HC40E7

90

C2 440 489 XHP35A-00-0000-0D0UC20E7

B4 410 456 XHP35A-00-0000-0D0UB40E7

B2 380 423 XHP35A-00-0000-0D0UB20E7

2700K 8A, 8B, 8C, 8D

80 C4 475 528 XHP35A-00-0000-0D0HC40E8

C2 440 489 XHP35A-00-0000-0D0HC20E8

90 B4 410 456 XHP35A-00-0000-0D0UB40E8

B2 380 423 XHP35A-00-0000-0D0UB20E8

FLUX CHARACTERISTICS, HIGH DENSITY ANSI ORDER CODES AND BINS (TJ

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

8

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS (TJ

The following table provides order codes for XLamp XHP35 High Intensity LEDs. For a complete description of how the ux and chromaticity

groups are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).

Nominal

CCT

CRI Minimum Luminous Flux

 3-Step 5-Step

Min Typ Group 





 Group Order Code Group Order Code

5700K

70

D4 550 612

57E

XHP35A-H0-0000-0D0BD457E

D2 510 567 XHP35A-H0-0000-0D0BD257E

C4 475 528 XHP35A-H0-0000-0D0BC457E

80

D2 510 567

57E

XHP35A-H0-0000-0D0HD257E

C4 475 528 XHP35A-H0-0000-0D0HC457E

C2 440 489 XHP35A-H0-0000-0D0HC257E

90

C2 440 489

57E

XHP35A-H0-0000-0D0UC257E

B4 410 456 XHP35A-H0-0000-0D0UB457E

B2 380 423 XHP35A-H0-0000-0D0UB257E

A4 355 395 XHP35A-H0-0000-0D0UA457E

5000K

70

D4 550 612

50E

XHP35A-H0-0000-0D0BD450E

D2 510 567 XHP35A-H0-0000-0D0BD250E

C4 475 528 XHP35A-H0-0000-0D0BC450E

80

D2 510 567

50E

XHP35A-H0-0000-0D0HD250E

C4 475 528 XHP35A-H0-0000-0D0HC450E

C2 440 489 XHP35A-H0-0000-0D0HC250E

90

C2 440 489

50E

XHP35A-H0-0000-0D0UC250E

B4 410 456 XHP35A-H0-0000-0D0UB450E

B2 380 423 XHP35A-H0-0000-0D0UB250E

A4 355 395 XHP35A-H0-0000-0D0UA450E

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

9

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

Nominal

CCT

CRI Minimum Luminous Flux

 3-Step 5-Step

Min Typ Group 





 Group Order Code Group Order Code

4500K

70

D4 550 612

45E

XHP35A-H0-0000-0D0BD445E

D2 510 567 XHP35A-H0-0000-0D0BD245E

C4 475 528 XHP35A-H0-0000-0D0BC445E

80

D2 510 567

45E

XHP35A-H0-0000-0D0HD245E

C4 475 528 XHP35A-H0-0000-0D0HC445E

C2 440 489 XHP35A-H0-0000-0D0HC245E

90

B4 410 456

45E

XHP35A-H0-0000-0D0UB445E

B2 380 423 XHP35A-H0-0000-0D0UB245E

A4 355 395 XHP35A-H0-0000-0D0UA445E

4000K

70

D4 550 612

40E

XHP35A-H0-0000-0D0BD440E

D2 510 567 XHP35A-H0-0000-0D0BD240E

C4 475 528 XHP35A-H0-0000-0D0BC440E

C2 440 489 XHP35A-H0-0000-0D0BC240E

80

C4 475 528

40E

XHP35A-H0-0000-0D0HC440E

C2 440 489 XHP35A-H0-0000-0D0HC240E

90

B4 410 456

40E

XHP35A-H0-0000-0D0UB440E

B2 380 423 XHP35A-H0-0000-0D0UB240E

A4 355 395 XHP35A-H0-0000-0D0UA440E

3500K

70

D2 510 567

35E

XHP35A-H0-0000-0D0BD235E

C4 475 528 XHP35A-H0-0000-0D0BC435E

C2 440 489 XHP35A-H0-0000-0D0BC235E

80

C4 475 528

35G

XHP35A-H0-0000-0D0HC435G

35E

XHP35A-H0-0000-0D0HC435E

C2 440 489 XHP35A-H0-0000-0D0HC235G XHP35A-H0-0000-0D0HC235E

B4 410 456 XHP35A-H0-0000-0D0HB435G XHP35A-H0-0000-0D0HB435E

90

B2 380 423

35G

XHP35A-H0-0000-0D0UB235G

35E

XHP35A-H0-0000-0D0UB235E

A4 355 395 XHP35A-H0-0000-0D0UA435G XHP35A-H0-0000-0D0UA435E

FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS (TJ

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

10

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

Nominal

CCT

CRI Minimum Luminous Flux

 3-Step 5-Step

Min Typ Group 





 Group Order Code Group Order Code

3000K

70

D2 510 567

30E

XHP35A-H0-0000-0D0BD230E

C4 475 528 XHP35A-H0-0000-0D0BC430E

C2 440 489 XHP35A-H0-0000-0D0BC230E

80

C2 440 489

30G

XHP35A-H0-0000-0D0HC230G

30E

XHP35A-H0-0000-0D0HC230E

B4 410 456 XHP35A-H0-0000-0D0HB430G XHP35A-H0-0000-0D0HB430E

90

B2 380 423

30G

XHP35A-H0-0000-0D0UB230G

30E

XHP35A-H0-0000-0D0UB230E

A4 355 395 XHP35A-H0-0000-0D0UA430G XHP35A-H0-0000-0D0UA430E

A2 330 367 XHP35A-H0-0000-0D0UA230G XHP35A-H0-0000-0D0UA230E

2700K

80

C2 440 489

27G

XHP35A-H0-0000-0D0HC227G

27E

XHP35A-H0-0000-0D0HC227E

B4 410 456 XHP35A-H0-0000-0D0HB427G XHP35A-H0-0000-0D0HB427E

B2 380 423 XHP35A-H0-0000-0D0HB227G XHP35A-H0-0000-0D0HB227E

90

A4 355 395

27G

XHP35A-H0-0000-0D0UA427G

27E

XHP35A-H0-0000-0D0UA427E

A2 330 367 XHP35A-H0-0000-0D0UA227G XHP35A-H0-0000-0D0UA227E

FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS (TJ

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

11

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

FLUX CHARACTERISTICS, HIGH INTENSITY ANSI WHITE ORDER CODES AND BINS (TJ

The following table provides order codes for XLamp XHP35 High Intensity LEDs. For a complete description of how the ux and chromaticity

groups are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).

Nomimal

CCT Chromaticity Regions

CRI Minimum Luminous Flux



Order Code

Min Typ Group 







7000K

0A, 0B, 0C, 0D,

0R, 0S, 0T, 0U,

1A, 1B, 1C, 1D,

1R, 1S, 1T, 1U

0 68

D4 550 612 XHP35A-H0-0000-0D00D40DT

D2 510 567 XHP35A-H0-0000-0D00D20DT

C4 475 528 XHP35A-H0-0000-0D00C40DT

70

D4 550 612 XHP35A-H0-0000-0D0BD40DT

D2 510 567 XHP35A-H0-0000-0D0BD20DT

C4 475 528 XHP35A-H0-0000-0D0BC40DT

80

D2 510 567 XHP35A-H0-0000-0D0HD20DT

C4 475 528 XHP35A-H0-0000-0D0HC40DT

C2 440 489 XHP35A-H0-0000-0D0HC20DT

90

B4 410 456 XHP35A-H0-0000-0D0UB40DT

B2 380 423 XHP35A-H0-0000-0D0UB20DT

A4 355 395 XHP35A-H0-0000-0D0UA40DT

6500K 1A, 1B, 1C, 1D

0 68

D4 550 612 XHP35A-H0-0000-0D00D40E1

D2 510 567 XHP35A-H0-0000-0D00D20E1

C4 475 528 XHP35A-H0-0000-0D00C40E1

70

D4 550 612 XHP35A-H0-0000-0D0BD40E1

D2 510 567 XHP35A-H0-0000-0D0BD20E1

C4 475 528 XHP35A-H0-0000-0D0BC40E1

80

D2 510 567 XHP35A-H0-0000-0D0HD20E1

C4 475 528 XHP35A-H0-0000-0D0HC40E1

C2 440 489 XHP35A-H0-0000-0D0HC20E1

90

B4 410 456 XHP35A-H0-0000-0D0UB40E1

B2 380 423 XHP35A-H0-0000-0D0UB20E1

A4 355 395 XHP35A-H0-0000-0D0UA40E1

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

12

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

Nomimal

CCT Chromaticity Regions

CRI Minimum Luminous Flux



Order Code

Min Typ Group 







6000K

1A, 1B, 1C, 1D,

1R, 1S, 1T, 1U,

2A, 2B, 2C, 2D,

2R, 2S, 2T, 2U

0 68

D4 550 612 XHP35A-H0-0000-0D00D40DV

D2 510 567 XHP35A-H0-0000-0D00D20DV

C4 475 528 XHP35A-H0-0000-0D00C40DV

70

D4 550 612 XHP35A-H0-0000-0D0BD40DV

D2 510 567 XHP35A-H0-0000-0D0BD20DV

C4 475 528 XHP35A-H0-0000-0D0BC40DV

80

D2 510 567 XHP35A-H0-0000-0D0HD20DV

C4 475 528 XHP35A-H0-0000-0D0HC40DV

C2 440 489 XHP35A-H0-0000-0D0HC20DV

90

C2 440 489 XHP35A-H0-0000-0D0UC20DV

B4 410 456 XHP35A-H0-0000-0D0UB40DV

B2 380 423 XHP35A-H0-0000-0D0UB20DV

A4 355 395 XHP35A-H0-0000-0D0UA40DV

5700K 2A, 2B, 2C, 2D

0 68

D4 550 612 XHP35A-H0-0000-0D00D40E2

D2 510 567 XHP35A-H0-0000-0D00D20E2

C4 475 528 XHP35A-H0-0000-0D00C40E2

70

D4 550 612 XHP35A-H0-0000-0D0BD40E2

D2 510 567 XHP35A-H0-0000-0D0BD20E2

C4 475 528 XHP35A-H0-0000-0D0BC40E2

80

D2 510 567 XHP35A-H0-0000-0D0HD20E2

C4 475 528 XHP35A-H0-0000-0D0HC40E2

C2 440 489 XHP35A-H0-0000-0D0HC20E2

90

C2 440 489 XHP35A-H0-0000-0D0UC20E2

B4 410 456 XHP35A-H0-0000-0D0UB40E2

B2 380 423 XHP35A-H0-0000-0D0UB20E2

A4 355 395 XHP35A-H0-0000-0D0UA40E2

FLUX CHARACTERISTICS, HIGH INTENSITY ANSI ORDER CODES AND BINS (TJ

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

13

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

Nomimal

CCT Chromaticity Regions

CRI Minimum Luminous Flux



Order Code

Min Typ Group 







5000K 3A, 3B, 3C, 3D

0 68

D4 550 612 XHP35A-H0-0000-0D00D40E3

D2 510 567 XHP35A-H0-0000-0D00D20E3

C4 475 528 XHP35A-H0-0000-0D00C40E3

70

D4 550 612 XHP35A-H0-0000-0D0BD40E3

D2 510 567 XHP35A-H0-0000-0D0BD20E3

C4 475 528 XHP35A-H0-0000-0D0BC40E3

80

D2 510 567 XHP35A-H0-0000-0D0HD20E3

C4 475 528 XHP35A-H0-0000-0D0HC40E3

C2 440 489 XHP35A-H0-0000-0D0HC20E3

90

C2 440 489 XHP35A-H0-0000-0D0UC20E3

B4 410 456 XHP35A-H0-0000-0D0UB40E3

B2 380 423 XHP35A-H0-0000-0D0UB20E3

A4 355 395 XHP35A-H0-0000-0D0UA40E3

4500K 4A, 4B, 4C, 4D

0 68

D4 550 612 XHP35A-H0-0000-0D00D40E4

D2 510 567 XHP35A-H0-0000-0D00D20E4

C4 475 528 XHP35A-H0-0000-0D00C40E4

70

D4 550 612 XHP35A-H0-0000-0D0BD40E4

D2 510 567 XHP35A-H0-0000-0D0BD20E4

C4 475 528 XHP35A-H0-0000-0D0BC40E4

80

D2 510 567 XHP35A-H0-0000-0D0HD20E4

C4 475 528 XHP35A-H0-0000-0D0HC40E4

C2 440 489 XHP35A-H0-0000-0D0HC20E4

90

B4 410 456 XHP35A-H0-0000-0D0UB40E4

B2 380 423 XHP35A-H0-0000-0D0UB20E4

A4 355 395 XHP35A-H0-0000-0D0UA40E4

FLUX CHARACTERISTICS, HIGH INTENSITY ANSI ORDER CODES AND BINS (TJ

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

14

XLamp® XHp35 LED

Notes:

• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.

See the Measurements section (page 31).

• Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum

specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.

* Flux values @ 25°C are calculated and are for reference only.

Nomimal

CCT Chromaticity Regions

CRI Minimum Luminous Flux



Order Code

Min Typ Group 







4000K 5A, 5B, 5C, 5D

0 68

D4 550 612 XHP35A-H0-0000-0D00D40E5

D2 510 567 XHP35A-H0-0000-0D00D20E5

C4 475 528 XHP35A-H0-0000-0D00C40E5

C2 440 489 XHP35A-H0-0000-0D00C20E5

70

D4 550 612 XHP35A-H0-0000-0D0BD40E5

D2 510 567 XHP35A-H0-0000-0D0BD20E5

C4 475 528 XHP35A-H0-0000-0D0BC40E5

C2 440 489 XHP35A-H0-0000-0D0BC20E5

80 C4 475 528 XHP35A-H0-0000-0D0HC40E5

C2 440 489 XHP35A-H0-0000-0D0HC20E5

90

B4 410 456 XHP35A-H0-0000-0D0UB40E5

B2 380 423 XHP35A-H0-0000-0D0UB20E5

A4 355 395 XHP35A-H0-0000-0D0UA40E5

3500K 6A, 6B, 6C, 6D

70

D2 510 567 XHP35A-H0-0000-0D0BD20E6

C4 475 528 XHP35A-H0-0000-0D0BC40E6

C2 440 489 XHP35A-H0-0000-0D0BC20E6

80

C4 475 528 XHP35A-H0-0000-0D0HC40E6

C2 440 489 XHP35A-H0-0000-0D0HC20E6

B4 410 456 XHP35A-H0-0000-0D0HB40E6

90 B2 380 423 XHP35A-H0-0000-0D0UB20E6

A4 355 395 XHP35A-H0-0000-0D0UA40E6

3000K 7A, 7B, 7C, 7D

70

D2 510 567 XHP35A-H0-0000-0D0BD20E7

C4 475 528 XHP35A-H0-0000-0D0BC40E7

C2 440 489 XHP35A-H0-0000-0D0BC20E7

80 C2 420 489 XHP35A-H0-0000-0D0HC20E7

B4 410 456 XHP35A-H0-0000-0D0HB40E7

90

B2 380 423 XHP35A-H0-0000-0D0UB20E7

A4 355 395 XHP35A-H0-0000-0D0UA40E7

A2 330 367 XHP35A-H0-0000-0D0UA20E7

2700K 8A, 8B, 8C, 8D

80

C2 420 489 XHP35A-H0-0000-0D0HC20E8

B4 410 456 XHP35A-H0-0000-0D0HB40E8

B2 380 423 XHP35A-H0-0000-0D0HB20E8

90 A4 355 395 XHP35A-H0-0000-0D0UA40E8

A2 330 367 XHP35A-H0-0000-0D0UA20E8

FLUX CHARACTERISTICS, HIGH INTENSITY ANSI ORDER CODES AND BINS (TJ

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

15

XLamp® XHp35 LED

RELATIVE SPECTRAL POWER DISTRIBUTION

RELATIVE FLUX VS. JUNCTION TEMPERATURE (IFm

Relative Spectral Power

0%

20%

40%

60%

80%

100%

380 430 480 530 580 630 680 730 780

Relative Radiant Power

Wavelength (nm)

6000 K, 70 CRI

5000 K, 70 CRI

3000 K, 80 CRI

Relative Flux Output vs. Junction Temperature

0%

20%

40%

60%

80%

100%

120%

25 50 75 100 125 150

Relative Luminous Flux

Junction Temperature (ºC)

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

16

XLamp® XHp35 LED

ELECTRICAL CHARACTERISTICS (TJ

RELATIVE FLUX VS. CURRENT (TJ

Electrical Characteristics (Tj = 85°C)

175

350

525

700

875

1050

10.5 11.0 11.5 12.0 12.5

Forward Current (mA)

Forward Voltage (V)

Relative Intensity vs. Current (Tj = 85°C)

0%

40%

80%

120%

160%

200%

240%

0175 350 525 700 875 1050

Relative Luminous Flux

Forward Current (mA)

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

17

XLamp® XHp35 LED



Relative Chromaticity Vs. Current, WW - High Density

-0.020

-0.016

-0.012

-0.008

-0.004

0.000

0.004

0.008

0.012

0.016

0.020

0175 350 525 700 875 1050

Current (mA)

ΔCCx

ΔCCy

High Density

Relative Chromaticity Vs. Current, WW - High Intensity

-0.020

-0.016

-0.012

-0.008

-0.004

0.000

0.004

0.008

0.012

0.016

0.020

0175 350 525 700 875 1050

Current (mA)

ΔCCx

ΔCCy

High Intensity

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

18

XLamp® XHp35 LED



Relative Chromaticity Vs. Temperature WW - High Density

-0.020

-0.016

-0.012

-0.008

-0.004

0.000

0.004

0.008

0.012

0.016

0.020

25 50 75 100 125 150

Tsp (°C)

ΔCCx

ΔCCy

High Density

Relative Chromaticity Vs. Temperature WW - High Intensity

-0.020

-0.016

-0.012

-0.008

-0.004

0.000

0.004

0.008

0.012

0.016

0.020

25 50 75 100 125 150

Tsp (°C)

ΔCCx

ΔCCy

High Intensity

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

19

XLamp® XHp35 LED

TYPICAL SPATIAL DISTRIBUTION

0%

20%

40%

60%

80%

100%

-90 -70 -50 -30 -10 10 30 50 70 90

Relative Luminous Intensity

Angle (º)

High Density

Typical Spatial Radiation Pattern

0%

20%

40%

60%

80%

100%

-90 -70 -50 -30 -10 10 30 50 70 90

Relative Luminous Intensity

Angle (º)

High Intensity

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

20

XLamp® XHp35 LED

THERMAL DESIGN

The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end

product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life

and optical characteristics.

PERFORMANCE GROUPS – LUMINOUS FLUX (TJ

XLamp XHP35 LEDs are tested for luminous ux and placed into one of the following luminous-ux groups.

Group Code Minimum Luminous Flux Maximum Luminous Flux

A2 330 355

A4 355 380

B2 380 410

B4 410 440

C2 440 475

C4 475 510

D2 510 550

D4 550 590

E2 590 635

E4 635 680

F2 680 730

Thermal Design - High Intensity

0

200

400

600

800

1000

1200

020 40 60 80 100 120 140 160

Maximum Current (mA)

Ambient Temperature (ºC)

Rj-a = 2°C/W

Rj-a = 4°C/W

Rj-a = 6°C/W

Rj-a = 8°C/W

XHP35 High

Intensity

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

21

XLamp® XHp35 LED

PERFORMANCE GROUPS – CHROMATICITY

XLamp XHP35 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.

EasyWhite Color Temperatures – 3-Step Ellipse

Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle



x y a b

35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0

30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2

27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5

EasyWhite Color Temperatures – 5-Step Ellipse

Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle



x y a b

57E 5700K 0.3287 0.3417 0.01230 0.00600 72.0

50E 5000K 0.3447 0.3553 0.01400 0.00520 65.0

45E 4500K 0.3611 0.3658 0.01420 0.00550 61.5

40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7

35E 3500K 0.4073 0.3917 0.01545 0.00690 54.0

30E 3000K 0.4338 0.4030 0.01390 0.00680 53.2

27E 2700K 0.4577 0.4099 0.01350 0.00700 48.5

ANSI White Bins ANSI White Bins

CCT Bin Code x y CCT Bin Code x y

7000 K

0A0

0.2950 0.2970

7000 K

0R0

0.2980 0.2880

0.2920 0.3060 0.2950 0.2970

0.2984 0.3133 0.3009 0.3042

0.3009 0.3042 0.3037 0.2937

0B0

0.2920 0.3060

0S0

0.2895 0.3135

0.2895 0.3135 0.2870 0.3210

0.2962 0.3220 0.2937 0.3312

0.2984 0.3133 0.2962 0.3220

0C0

0.2984 0.3133

0T0

0.2962 0.3220

0.2962 0.3220 0.2937 0.3312

0.3028 0.3304 0.3005 0.3415

0.3048 0.3207 0.3028 0.3304

0D0

0.2984 0.3133

0U0

0.3037 0.2937

0.3048 0.3207 0.3009 0.3042

0.3068 0.3113 0.3068 0.3113

0.3009 0.3042 0.3093 0.2993

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

22

XLamp® XHp35 LED

ANSI White Bins ANSI White Bins

CCT Bin Code x y CCT Bin Code x y

6500 K

1A0

0.3048 0.3207

6500 K

1R0

0.3068 0.3113

0.3130 0.3290 0.3144 0.3186

0.3144 0.3186 0.3161 0.3059

0.3068 0.3113 0.3093 0.2993

1B0

0.3028 0.3304

1S0

0.3005 0.3415

0.3115 0.3391 0.3099 0.3509

0.3130 0.3290 0.3115 0.3391

0.3048 0.3207 0.3028 0.3304

1C0

0.3115 0.3391

1T0

0.3099 0.3509

0.3205 0.3481 0.3196 0.3602

0.3213 0.3373 0.3205 0.3481

0.3130 0.3290 0.3115 0.3391

1D0

0.3130 0.3290

1U0

0.3144 0.3186

0.3213 0.3373 0.3221 0.3261

0.3221 0.3261 0.3231 0.3120

0.3144 0.3186 0.3161 0.3059

ANSI White Bins ANSI White Bins

CCT Bin Code x y CCT Bin Code x y

5700 K

2A0

0.3215 0.3350

5700 K

2R0

0.3222 0.3243

0.3290 0.3417 0.3290 0.3300

0.3290 0.3300 0.3290 0.3180

0.3222 0.3243 0.3231 0.3120

2B0

0.3207 0.3462

2S0

0.3196 0.3602

0.3290 0.3538 0.3290 0.3690

0.3290 0.3417 0.3290 0.3538

0.3215 0.3350 0.3207 0.3462

2C0

0.3290 0.3538

2T0

0.3290 0.3690

0.3376 0.3616 0.3381 0.3762

0.3371 0.3490 0.3376 0.3616

0.3290 0.3417 0.3290 0.3538

2D0

0.3290 0.3417

2U0

0.3290 0.3300

0.3371 0.3490 0.3366 0.3369

0.3366 0.3369 0.3361 0.3245

0.3290 0.3300 0.3290 0.3180



SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

23

XLamp® XHp35 LED

ANSI White Bins ANSI White Bins

CCT Bin Code x y CCT Bin Code x y

5000 K

3A0

0.3371 0.3490

4500 K

4A0

0.3530 0.3597

0.3451 0.3554 0.3615 0.3659

0.3440 0.3427 0.3512 0.3465

0.3366 0.3369 0.3515 0.3487

3B0

0.3376 0.3616

4B0

0.3548 0.3736

0.3463 0.3687 0.3641 0.3804

0.3451 0.3554 0.3530 0.3597

0.3371 0.3490 0.3533 0.3620

3C0

0.3463 0.3687

4C0

0.3641 0.3804

0.3551 0.3760 0.3736 0.3874

0.3533 0.3620 0.3702 0.3722

0.3451 0.3554 0.3615 0.3659

3D0

0.3451 0.3554

4D0

0.3615 0.3659

0.3533 0.3620 0.3702 0.3722

0.3515 0.3487 0.3670 0.3578

0.3440 0.3427 0.3590 0.3521

ANSI White Bins ANSI White Bins

CCT Bin Code x y CCT Bin Code x y

4000 K

5A0

0.3670 0.3578

3500 K

6A0

0.3889 0.3690

0.3702 0.3722 0.3941 0.3848

0.3825 0.3798 0.4080 0.3916

0.3783 .3646 0.4017 0.3751

5B0

0.3702 0.3722

6B0

0.3941 0.3848

0.3736 0.3874 0.3996 0.4015

0.3869 0.3958 .04146 0.4089

0.3825 0.3798 .04080 0.3916

5C0

0.3825 0.3798

6C0

0.4080 0.3916

0.3869 0.3958 0.4146 0.4089

.04006 0.4044 0.4299 0.4165

0.3950 0.3875 0.4221 0.3984

5D0

0.3783 0.3646

6D0

0.4017 0.3751

0.3825 0.3798 0.4080 0.3916

0.3950 0.3875 0.4221 0.3984

0.3898 0.3716 0.4147 0.3814



SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

24

XLamp® XHp35 LED

ANSI White Bins ANSI White Bins

CCT Bin Code x y CCT Bin Code x y

3000 K

7A0

0.4147 0.3814

2700 K

8A0

0.4373 0.3893

0.4221 0.3984 0.4465 0.4071

0.4342 0.4028 0.4582 0.4099

0.4259 0.3853 0.4483 0.3919

7B0

0.4221 0.3984

8B0

0.4465 .04071

0.4299 0.4165 0.4562 0.4260

0.4430 0.4212 0.4687 0.4289

0.4342 .04028 .04582 0.4099

7C0

0.4342 0.4028

8C0

0.4582 0.4099

0.4430 0.4212 0.4687 0.4289

0.4562 0.4260 0.4813 0.4319

0.4465 0.4071 0.4700 0.4126

7D0

0.4259 0.3853

8D0

0.4483 0.3919

0.4342 0.4028 0.4582 0.4099

0.4465 0.4071 0.4700 0.4126

0.4373 0.3893 0.4593 0.3944

CREE’S EASYWHITE® CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE

ANSI Cool White

5000 K

5700 K

6500 K

8000 K

0A

0B

0C

0D

0R

0S

0T

0U

1A

1B

1C

1D

2A

2B

2C

2D

1R

1S

1T

1U

2R

2S

2T

2U

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

CCy

CCx

ANSI

C78.377A



SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

25

XLamp® XHp35 LED

CREE’S EASYWHITE® CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE - CONTINUED

ANSI Neutral White and ANSI Warm White

2700 K

3000 K

3500 K

4000 K

4500 K

5000 K

5700 K

3A

3B

3C

3D

4A

4B

4C

4D

5A

5B

5C

5D

6A

6B

6C

6D

7A

7B

7C

7D 8A

8B 8C

8D

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.46

0.47

0.48

0.49

CCy

CCx

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

26

XLamp® XHp35 LED

CREE’S EASYWHITE® CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE - CONTINUED

2700 K

3000 K

3500 K

4000 K

4500 K

5000 K

5700 K

6500 K

8000 K

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.27

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.46

0.47

0.48

0.49

CCy

CCx

ANSI C78.377 Quadrangle

EasyWhite 5-Step

EasyWhite 3-Step

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

27

XLamp® XHp35 LED

CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS

5000 K

5700 K

6500 K

8000 K

0A

0B

0C

0D

0R

0S

0T

0U

1A

1B

1C

1D

2A

2B

2C

2D

1R

1S

1T

1U

2R

2S

2T

2U

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

CCy

CCx

ANSI

C78.377A

DT

5000 K

5700 K

6500 K

8000 K

0A

0B

0C

0D

0R

0S

0T

0U

1A

1B

1C

1D

2A

2B

2C

2D

1R

1S

1T

1U

2R

2S

2T

2U

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

CCy

CCx

ANSI

C78.377A

DV

5000 K

5700 K

6500 K

8000 K

0A

0B

0C

0D

0R

0S

0T

0U

1A

1B

1C

1D

2A

2B

2C

2D

3A

3B

1R

1S

1T

1U

2R

2S

2T

2U

3R

3S

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

CCy

CCx

ANSI

C78.377A

E1

5000 K

5700 K

6500 K

8000 K

0A

0B

0C

0D

0R

0S

0T

0U

1A

1B

1C

1D

2A

2B

2C

2D

3A

3B

1R

1S

1T

1U

2R

2S

2T

2U

3R

3S

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

CCy

CCx

ANSI

C78.377A

E2

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

28

XLamp® XHp35 LED

CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS

2700 K

3000 K

3500 K

4000 K

4500 K

5000 K

3A

3B

3C

3D

4A

4B

4C

4D

5A

5B

5C

5D

6A

6B

6C

6D

7A

7B

7C

7D

8B

8A 8D

8C

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.46

0.47

0.48

0.49

0.50

CCy

CCx

E3

E4

E5

E6

E7

E8

ANSI

C78.377A

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

29

XLamp® XHp35 LED

BIN AND ORDER CODE FORMATS

Bin codes and order codes for XHP35 LEDs are congured in the following manner:

Order Code Bin Code

SSSSSS-BD-GGGG-HJKLMMNNN

Series

XHP35A = XHP35

Internal code

Minimum luminous flux group

Chromaticity group

CRI specification

0 = No minimum CRI

B = 70 CRI minimum

H = 80 CRI minimum

P = 85 CRI minimum

U = 90 CRI minimum

Configuration

B: Version

0 = High density

H = High intensity

D: Reel size

SSSSSS-B-NNN-MMM-JK-L-PP

Series

XHP35A = XHP35

Chromaticity group

Luminous flux group

Voltage performance group

CRI specification

0 = No minimum CRI

B = 70 CRI minimum

H = 80 CRI minimum

P = 85 CRI minimum

U = 90 CRI minimum

Internal code

Version

0 = High density

H = High intensity

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

30

XLamp® XHp35 LED

REFLOW SOLDERING CHARACTERISTICS

In testing, Cree has found XLamp XHP35 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general

guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder paste used,

and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.

Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.

Profile Feature Lead-Free Solder

Average Ramp-Up Rate (Tsmax to Tp)1.2°C/second

Preheat: Temperature Min (Tsmin) 120 °C

Preheat: Temperature Max (Tsmax)170 °C

Preheat: Time (tsmin to tsmax) 65-150 seconds

Time Maintained Above: Temperature (TL)217 °C

Time Maintained Above: Time (tL) 45-90 seconds

Peak/Classication Temperature (Tp) 235 - 245 °C

Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds

Ramp-Down Rate 1 - 6 °C/second

Time 25°C to Peak Temperature 4 minutes max.

Note: All temperatures refer to the topside of the package, measured on the package body surface.

IPC/JEDEC J-STD-020C

TP

TL

Temperature

Time

t 25˚C to Peak

Preheat

ts

tS

tP

25

Ramp-down

Ramp-up

Critical Zone

TL to TP

Tsmax

Tsmin

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

31

XLamp® XHp35 LED

NOTES

Measurements

The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only

and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number

of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated

values are provided for informational purposes only and are not intended or provided as specications.



Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp

LEDs and details of Cree’s pre-release qualication testing for XLamp LEDs.

Lumen Maintenance

Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.

For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.

Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.

Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect

the LED junction temperature.

Moisture Sensitivity

Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.

Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.

Once the MBP is opened, XLamp XHP35 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited oor life in

conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs

in the original MBP.

RoHS Compliance

The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold

limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as

implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product

Ecology section of the Cree website.

REACh Compliance

REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)

has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to

insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available

upon request.

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

32

XLamp® XHp35 LED

UL® Recognized Component

This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED

package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.

Vision Advisory

WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please

refer to the LED Eye Safety application note.

NOTES - CONTINUED

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

33

XLamp® XHp35 LED

MECHANICAL DIMENSIONS

Thermal vias, if present, are not shown on these drawings.

All dimensions are ±.13mm unless otherwise indicated.

XHP35 High Density

XHP35A-0x-xxxx-xxxxxxxxx

XHP35 High Density

XHP35 High Intensity

XHP35A-Hx-xxxx-xxxxxxxxx

XHP35 High Intensity

Bottom View

Top View

Anode

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5°

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5°

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6

3.30

.50

3.30

2.30

1.30

.50

3.45

R1.85

2.80

.58

3.30

.50

2.30

.64

.75

.25

3.30

1.01

.50

3.30

1.30

3.30

1/122.000

D

2610-00053

OUTLINE DRAWING XHP35

5/11/15D. CRONIN

REVISONS

REV DESCRIPTION BY DATE APP'D

RECOMMENDED PCB SOLDER PAD

RECOMMENDED STENCIL PATTERN

(HATCHED AREA IS OPEN)

ALL DIMENSIONS ARE ± .13mm UNLESS OTHERWISE NOTED

OPTICAL REFERENCE

OPTICAL

REFERENCE

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5°

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5°

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6

3.30

.50

3.30

2.30

1.30

.50

3.45

R1.85

2.80

.58

3.30

.50

2.30

.64

.75

.25

3.30

1.01

.50

3.30

1.30

3.30

1/122.000

D

2610-00053

OUTLINE DRAWING XHP35

5/11/15D. CRONIN

REVISONS

REV DESCRIPTION BY DATE APP'D

RECOMMENDED PCB SOLDER PAD

RECOMMENDED STENCIL PATTERN

(HATCHED AREA IS OPEN)

ALL DIMENSIONS ARE ± .13mm UNLESS OTHERWISE NOTED

OPTICAL REFERENCE

OPTICAL

REFERENCE

Side View

Top View Side View Bottom View

Anode

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5°

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5°

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6

3.30

.50

3.45

1.0

2.30

3.30

1.30

.50

3.30

2.30

.50

1.01

3.30

.75

.25

.64

3.30

1.30

3.30

.50

1/122.000

D

2610-00057

OUTLINE DRAWING XHP35 HI

3/13/15D. CRONIN

REVISONS

REV DESCRIPTION BY DATE APP'D

RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN

(HATCHED AREA IS OPEN)

ALL DIMENSIONS ARE ± .13mm UNLESS OTHERWISE NOTED

OPTICAL

REFERENCE

OPTICAL

REFERENCE

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5°

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5°

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6

3.30

.50

3.45

1.0

2.30

3.30

1.30

.50

3.30

2.30

.50

1.01

3.30

.75

.25

.64

3.30

1.30

3.30

.50

1/122.000

D

2610-00057

OUTLINE DRAWING XHP35 HI

3/13/15D. CRONIN

REVISONS

REV DESCRIPTION BY DATE APP'D

RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN

(HATCHED AREA IS OPEN)

ALL DIMENSIONS ARE ± .13mm UNLESS OTHERWISE NOTED

OPTICAL

REFERENCE

OPTICAL

REFERENCE

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

34

XLamp® XHp35 LED

MECHANICAL DIMENSIONS - CONTINUED

XHP35 High Density and XHP35 High Intensity

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5°

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5°

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6

3.30

.50

3.30

2.30

1.30

.50

3.45

R1.85

2.80

.58

3.30

.50

2.30

.64

.75

.25

3.30

1.01

.50

3.30

1.30

3.30

1/122.000

D

2610-00053

OUTLINE DRAWING XHP35

5/11/15D. CRONIN

REVISONS

REV DESCRIPTION BY DATE APP'D

RECOMMENDED PCB SOLDER PAD

RECOMMENDED STENCIL PATTERN

(HATCHED AREA IS OPEN)

ALL DIMENSIONS ARE ± .13mm UNLESS OTHERWISE NOTED

OPTICAL REFERENCE

OPTICAL

REFERENCE

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5°

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5°

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6

3.30

.50

3.30

2.30

1.30

.50

3.45

R1.85

2.80

.58

3.30

.50

2.30

.64

.75

.25

3.30

1.01

.50

3.30

1.30

3.30

1/122.000

D

2610-00053

OUTLINE DRAWING XHP35

5/11/15D. CRONIN

REVISONS

REV DESCRIPTION BY DATE APP'D

RECOMMENDED PCB SOLDER PAD

RECOMMENDED STENCIL PATTERN

(HATCHED AREA IS OPEN)

ALL DIMENSIONS ARE ± .13mm UNLESS OTHERWISE NOTED

OPTICAL REFERENCE

OPTICAL

REFERENCE

Recommended PCB Solder Pad Recommended Stencil Pattern



SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

35

XLamp® XHp35 LED

TAPE AND REEL

All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.

Except as noted, all dimensions in mm [inches]

XHP35 High Density

XHP35A-0x-xxxx-xxxxxxxxx

XHP35 High Density

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

3456

6 5 4 3 2 1

A

B

C

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5 °

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6 1/11.000

A

2402-00040

Carrier Tape, XPL

5/16/14 D. CRONIN

.30 [.012]

T

Ao

3.60 [.142]

3.00 [.118]

Ko

3.0 °

3.60 [.142]

Bo

10.25

[.404]

E2

P2

2.00 [.079]

Po

4.00 [.157]

Ø1.50

+.10

-.00

Ø1.50

[.059]

D1

MIN

12.00 [.472]

NOMINAL

12.30 [.484]

MAX

W

1.75 [.069]

E1

5.50 [.217]F

8.00 [.315]

P

POCKET SIZE

Ao - 3.60 mm [.142"]

Bo - 3.60 mm [.142"]

Ko - 3.00 mm [.118"]

CATHODE SIDE

ANODE SIDE

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

3456

6 5 4 3 2 1

A

B

C

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5 °

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6 1/11.000

A

2402-00040

Carrier Tape, XPL

5/16/14 D. CRONIN

.30 [.012]

T

Ao

3.60 [.142]

3.00 [.118]

Ko

3.0 °

3.60 [.142]

Bo

10.25

[.404]

E2

P2

2.00 [.079]

Po

4.00 [.157]

Ø1.50

+.10

-.00

Ø1.50

[.059]

D1

MIN

12.00 [.472]

NOMINAL

12.30 [.484]

MAX

W

1.75 [.069]

E1

5.50 [.217]F

8.00 [.315]

P

POCKET SIZE

Ao - 3.60 mm [.142"]

Bo - 3.60 mm [.142"]

Ko - 3.00 mm [.118"]

CATHODE SIDE

ANODE SIDE

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

3456

6 5 4 3 2 1

A

B

C

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5 °

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6 1/11.000

A

2402-00040

Carrier Tape, XPL

5/16/14 D. CRONIN

.30 [.012]

T

Ao

3.60 [.142]

3.00 [.118]

Ko

3.0 °

3.60 [.142]

Bo

10.25

[.404]

E2

P2

2.00 [.079]

Po

4.00 [.157]

Ø1.50

+.10

-.00

Ø1.50

[.059]

D1

MIN

12.00 [.472]

NOMINAL

12.30 [.484]

MAX

W

1.75 [.069]

E1

5.50 [.217]F

8.00 [.315]

P

POCKET SIZE

Ao - 3.60 mm [.142"]

Bo - 3.60 mm [.142"]

Ko - 3.00 mm [.118"]

CATHODE SIDE

ANODE SIDE

SIZE

TITLE

OF

REV.

SHEET

C

DRAWING NO.

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

3456

6 5 4 3 2 1

A

B

C

Phone (919) 313-5300

Fax (919) 313-5558

4600 Silicon Drive

Durham, N.C 27703

UNAUTHORIZED PERSON WITHOUT

THE WRITTEN CONSENT

MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY

CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT

CONTAINED WITHIN ARE THE PROPRIETARY AND

CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5 °

.XXX ± .25

.XX ± .75

.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125

X° ± .5 °

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.

TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH:

1.6 1/11.000

A

2402-00040

Carrier Tape, XPL

5/16/14 D. CRONIN

.30 [.012]

T

Ao

3.60 [.142]

3.00 [.118]

Ko

3.0 °

3.60 [.142]

Bo

10.25

[.404]

E2

P2

2.00 [.079]

Po

4.00 [.157]

Ø1.50

+.10

-.00

Ø1.50

[.059]

D1

MIN

12.00 [.472]

NOMINAL

12.30 [.484]

MAX

W

1.75 [.069]

E1

5.50 [.217]F

8.00 [.315]

P

POCKET SIZE

Ao - 3.60 mm [.142"]

Bo - 3.60 mm [.142"]

Ko - 3.00 mm [.118"]

CATHODE SIDE

ANODE SIDE

Anode Side

Loaded Pockets

(500 Lamps)

Leader

400 mm (min.) of

empty pockets with

at least 100 mm

sealed by tape

(50 empty pockets min.)

Trailer

160 mm (min.) of

empty pockets

sealed with tape

(20 pockets min.)

START

END

User Feed Direction

Loaded Pockets

(1,000 Lamps)

Leader

400mm (min) of

empty pockets with

at least 100mm

sealed by tape

(50 empty pockets min.)

Trailer

160mm (min) of

empty pockets

sealed with tape

(20 pockets min.)

START

END

Cathode Side

Anode Side

(denoted by + and circle)

160.0

A

B

2.5

±.1

SECTION A-A

SCALE 2 : 1

1.5

±.1

8.0

±.1

4.0

±.1

1.75

±.10

12.0 .0

+

.3

DETAIL B

SCALE 2 : 1

13

mm

7"

Cover Tape

Pocket Tape

User Feed Direction

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

36

XLamp® XHp35 LED

TAPE AND REEL - CONTINUED

XHP35 High Intensity

XHP35A-Hx-xxxx-xxxxxxxxx

XHP35 High Intensity

.30 [.012]

T

Ao

3.70 [.146]

1.20 [.047]

Ko

3.0°

3.70 [.146]

Bo

10.25

[.404]

E2

P2

2.00 [.079]

Po

4.00 [.157]

Ø 1.50 +.10 +.0039 -.00[.0591-.0000]Do

Ø 1.50

[.059]

D1

MIN

12.00 [.472]

NOMINAL

12.30 [.484]

MAX

W

1.75 [.069]

E1

5.50 [.217]F

8.00 [.315]

P

POCKET SIZE

Ao - 3.70 mm [.146"]

Bo - 3.70 mm [.146"]

Ko - 1.20 mm [.047"]

ANODE SIDE

CATHODE SIDE

.30 [.012]

T

Ao

3.70 [.146]

1.20 [.047]

Ko

3.0°

3.70 [.146]

Bo

10.25

[.404]

E2

P2

2.00 [.079]

Po

4.00 [.157]

Ø 1.50 +.10 +.0039 -.00[.0591-.0000]Do

Ø 1.50

[.059]

D1

MIN

12.00 [.472]

NOMINAL

12.30 [.484]

MAX

W

1.75 [.069]

E1

5.50 [.217]F

8.00 [.315]

P

POCKET SIZE

Ao - 3.70 mm [.146"]

Bo - 3.70 mm [.146"]

Ko - 1.20 mm [.047"]

ANODE SIDE

CATHODE SIDE

.30 [.012]

T

Ao

3.70 [.146]

1.20 [.047]

Ko

3.0°

3.70 [.146]

Bo

10.25

[.404]

E2

P2

2.00 [.079]

Po

4.00 [.157]

Ø 1.50 +.10 +.0039 -.00[.0591-.0000]Do

Ø 1.50

[.059]

D1

MIN

12.00 [.472]

NOMINAL

12.30 [.484]

MAX

W

1.75 [.069]

E1

5.50 [.217]F

8.00 [.315]

P

POCKET SIZE

Ao - 3.70 mm [.146"]

Bo - 3.70 mm [.146"]

Ko - 1.20 mm [.047"]

ANODE SIDE

CATHODE SIDE

.30 [.012]

T

Ao

3.70 [.146]

1.20 [.047]

Ko

3.0°

3.70 [.146]

Bo

10.25

[.404]

E2

P2

2.00 [.079]

Po

4.00 [.157]

Ø 1.50 +.10 +.0039 -.00[.0591-.0000]Do

Ø 1.50

[.059]

D1

MIN

12.00 [.472]

NOMINAL

12.30 [.484]

MAX

W

1.75 [.069]

E1

5.50 [.217]F

8.00 [.315]

P

POCKET SIZE

Ao - 3.70 mm [.146"]

Bo - 3.70 mm [.146"]

Ko - 1.20 mm [.047"]

ANODE SIDE

CATHODE SIDE

Anode Side

Loaded Pockets

(1,000 Lamps)

Leader

400mm (min) of

empty pockets with

at least 100mm

sealed by tape

(50 empty pockets min.)

Trailer

160mm (min) of

empty pockets

sealed with tape

(20 pockets min.)

START

END

Cathode Side

Anode Side

(denoted by + and circle)

160.0

A

B

2.5

±.1

SECTION A-A

SCALE 2 : 1

1.5

±.1

8.0

±.1

4.0

±.1

1.75

±.10

12.0 .0

+

.3

DETAIL B

SCALE 2 : 1

13

mm

7"

Cover Tape

Pocket Tape

User Feed Direction

SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

37

XLamp® XHp35 LED

PACKAGING

Patent Label

(on bottom of box)

Label with Cree Bin Code,

Quantity, Reel ID

Label with Cree Bin Code,

Quantity, Reel ID

Label with Cree Order Code,

Quantity, Reel ID, PO #

Label with Cree Order Code,

Quantity, Reel ID, PO #

Label with Cree Bin Code,

Quantity, Reel ID

Unpackaged Reel

Packaged Reel

Boxed Reel

CREE Bin Code

& Barcode Label

Vacuum-Sealed

Moisture Barrier Bag

Label with Customer

P/N, Qty, Lot #, PO #

Label with Cree Bin

Code, Qty, Lot #

Label with Cree Bin

Code, Qty, Lot #

Vacuum-Sealed

Moisture Barrier Bag

Patent Label

Label with Customer Order

Code, Qty, Reel ID, PO #

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Cree, Inc.:

XHP35A-01-0000-0D0BD40E2 XHP35A-H1-0000-0D0BC40E3 XHP35A-01-0000-0D0HC40E7 XHP35A-01-0000-

0D0BD20E5 XHP35A-01-0000-0D0BD40E3 XHP35A-H0-0000-0D00C40DV XHP35A-00-0000-0D0HD40E1 XHP35A-

00-0000-0D0HD230G XHP35A-00-0000-0D0BD457E XHP35A-00-0000-0D0HD250E XHP35A-00-0000-0D0BE245E

XHP35A-H0-0000-0D0UB20DV XHP35A-H0-0000-0D0UA40E5 XHP35A-H0-0000-0D0UA40DV XHP35A-00-0000-

0D0UB435E XHP35A-00-0000-0D0BD40DT XHP35A-00-0000-0D0BD435E XHP35A-H0-0000-0D0BC457E XHP35A-

00-0000-0D0PC40E4 XHP35A-H0-0000-0D0UA40E1 XHP35A-00-0000-0D0BD430E XHP35A-H0-0000-0D0UA20E8

XHP35A-00-0000-0D0BD40E6 XHP35A-00-0000-0D0PC450E XHP35A-00-0000-0D0PC40DT XHP35A-H0-0000-

0D00C40E1 XHP35A-H0-0000-0D0UB40E4 XHP35A-H0-0000-0D0UB20E3 XHP35A-H0-0000-0D0PB20E6 XHP35A-

00-0000-0D0UB427E XHP35A-00-0000-0D0BD40E7 XHP35A-00-0000-0D0UB40DT XHP35A-H0-0000-0D0UB235E

XHP35A-H0-0000-0D0UA430G XHP35A-00-0000-0D0UB445E XHP35A-H0-0000-0D0UA230G XHP35A-H0-0000-

0D0HB430G XHP35A-00-0000-0D0PB40E3 XHP35A-H0-0000-0D0UA20E7 XHP35A-H0-0000-0D0PB20E5 XHP35A-

H0-0000-0D0UB230G XHP35A-00-0000-0D0PB457E XHP35A-H0-0000-0D0BC40DT XHP35A-00-0000-0D0PC20E5

XHP35A-00-0000-0D0BD240E XHP35A-H0-0000-0D0BD235E XHP35A-00-0000-0D00D40DV XHP35A-H0-0000-

0D0HC230E XHP35A-00-0000-0D0UC40E1 XHP35A-H0-0000-0D0PB227E XHP35A-H0-0000-0D0PA457E XHP35A-

H0-0000-0D0HB427G XHP35A-00-0000-0D0PB227G XHP35A-00-0000-0D0PB40DV XHP35A-00-0000-0D0UB40E3

XHP35A-00-0000-0D0UB40E5 XHP35A-H0-0000-0D0PA20E7 XHP35A-00-0000-0D0UC457E XHP35A-H0-0000-

0D0PB20E1 XHP35A-00-0000-0D0UB435G XHP35A-00-0000-0D0UB227G XHP35A-H0-0000-0D0HC445E XHP35A-

00-0000-0D0UB427G XHP35A-00-0000-0D0BE20DV XHP35A-00-0000-0D00D40E4 XHP35A-00-0000-0D0UC245E

XHP35A-00-0000-0D0PC227G XHP35A-H0-0000-0D0BD257E XHP35A-00-0000-0D0BE20DT XHP35A-H0-0000-

0D0BD20E6 XHP35A-00-0000-0D0BD40E5 XHP35A-00-0000-0D0HD40DV XHP35A-H0-0000-0D0UA445E XHP35A-

00-0000-0D0PC457E XHP35A-00-0000-0D0PB40E4 XHP35A-H0-0000-0D0PB227G XHP35A-00-0000-0D0BD40E2

XHP35A-H0-0000-0D0UB235G XHP35A-00-0000-0D0PC40DV XHP35A-00-0000-0D0UC40E2 XHP35A-H0-0000-

0D0BC230E XHP35A-H0-0000-0D0BD20E1 XHP35A-00-0000-0D0HD40E3 XHP35A-00-0000-0D0HD235G XHP35A-

00-0000-0D0BD235E XHP35A-H0-0000-0D0PA227G XHP35A-H0-0000-0D0HC227E XHP35A-00-0000-0D0PB430E

XHP35A-00-0000-0D0BE240E XHP35A-H0-0000-0D0UB20E8 XHP35A-H0-0000-0D0UB20E4 XHP35A-H0-0000-

0D0PB250E XHP35A-00-0000-0D0UB450E XHP35A-H0-0000-0D0HC40DV XHP35A-00-0000-0D0UB20E7 XHP35A-

H0-0000-0D0BD20E3 XHP35A-H0-0000-0D0UB40E1 XHP35A-H0-0000-0D0HC240E XHP35A-H0-0000-0D0BD240E

XHP35A-H0-0000-0D0HC435G