If you need detailed product information, or help choosing the right
product for your application, see our Interactive Catalog. Use the
Interactive Catalog to access the most complete and up-to-date
information available.
The Interactive Catalog provides an extensive collection of product
specifications, application data, and technical literature that can be
searched based on criteria you select.
This PDF catalog information was published in November 2000.
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, IL 61032 www.honeywell.com/sensing
Sensing and Control
Interactive
Catalog...
Click this icon to try
the Interactive Catalog.
Interactive Catalog Supplements Catalog PDFs
Limit and Enclosed Switches
Explosion-Proof Switches
A112Honeywell1 Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 Canada
MICRO SWITCH explosion-proof switches contain and cool the
escaping hot gases that otherwise could cause an explosion out-
side the switch. Most of them are UL-CSA listed. Appropriate file
reference numbers and copies of the card file are available from
your local Branch Office or MICRO SWITCH, Freeport, Illinois.
Switches described on the following pages, except as noted below,
are UL listed as follows:
NEMA TYPE 7, CLASS I
FLAMMABLE GASES OR VAPORS
Type 7 enclosures are for use indoors in
locations classified as Class I, Groups B, C,
or D by the National Electrical Code.
Group B — (only switches so noted in the
order guides include this listing). Atmo-
spheres containing hydrogen or manufac-
tured gas.
Group C — atmospheres containing diethyl
ether, ethylene, or cyclopropane.
Group D — Atmospheres containing gaso-
line, hexane, butane, naptha, propane, ace-
tone, toluene, or isoprene.
DIVISION 1
Locations in which hazardous agents are
present under normal operating conditions.
DIVISION 2
Locations in which hazardous agents may
be present only in case of accidental rupture
or breakdown.
All MICRO SWITCH listings covered in Divi-
sion 1 are also covered in the same groups
in Division 2.
NEMA TYPE 9, CLASS II
COMBUSTIBLE DUSTS
Type 9 enclosures are for use in indoor
locations classified as Class II, Groups E, F
or G, as defined in the National Electrical
Code.
Group E — Atmospheres containing metal
dust.
Group F — Atmospheres containing carbon
black, coal dust or coke dust.
Group G — Atmospheres containing flour,
starch, or grain dust.
Limit and Enclosed Switches LSX Series
Weather-Sealed Explosion-Proof Switches
Honeywell1 Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 CanadaA113
LSX switches are for use either indoors or
outdoors in hazardous atmospheres as they
are a completely sealed explosion-proof de-
vice. Mounting hole location and tracking is
same as the long established MICRO
SWITCH ML-E1 explosion-proof switch.
An optional mounting plate provides the
same tracking and mounting as the stan-
dard HDLS. The majority of HDLS operating
heads and circuitry options are available on
the LSX.
Standard HDLS levers are used, but be-
cause of explosion-proof requirements, on-
ly nylon rollers or other non-sparking materi-
al can be selected. Plunger and cat whisker
types listed in the LSX order guide are of
non-sparking material.
SEALS
Application proven HDLS head seals are
retained to seal the top of the LSX. The
circular cover on the front is easily unscrew-
ed to expose the switching elements for
wiring or replacement. A screwdriver or bar
used on the wrenching lugs extending from
the front of the cover allows easy removal or
tightening. An O-ring seal is located be-
tween the housing and cover.
The LSX withstands pressure of an internal
explosion and cools the exploding gases
below the kindling temperature of the explo-
sive atmosphere. Flame paths are provided
by the cover-housing threads and an ex-
tended plunger between the switch cavity
and head.
FEATURES
1Sealing - applicable portions of NEMA 1,
3, 4, 6, 7, 9, and 13.
1Tracking interchangeability with MICRO
SWITCH ML-E1 and HDLS.
1Variety of heads and non-sparking
actuators.
1Field adjustability matches switch to
application.
1Momentary, maintained, random
sequence, or center neutral action.
110 amps continuous carry electrical
rating.
1Choice of silver or gold contacts.
112or 34inch conduit opening.
1UL Listed, file #E61730
1CSA Certified, file #LR57327
1Internal grounding screw.
NEMA standards: 1, 3, 4, 6, 7, 9 and 13. UL
listed and CSA certified: Class I, Div. 1,
Groups B, C and D. Class II, Div. 1, Groups
E, F and G.
Limit/ Enclosed
Limit and Enclosed Switches LSX Series
Weather-Sealed Explosion-Proof Switches
A114Honeywell1 Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 Canada
HOW TO ORDER
The order guide shows the option codes which are added to the LSX prefix to
specify the operating head, body and circuitry, assembly modifications (if
desired) and actuator type.
The example given below is LSXA3K-1A. This is an explosion-proof LSX
switch with the standard side rotary momentary-action head (A), single-pole
circuitry and
1
2
in. conduit opening (3K). Since no modification codes are
listed, it is adjusted for both clockwise (CW) and counterclockwise (CCW)
operation, with the actuator shaft facing the front (label side) of the switch.
The actuator (-1A) is in a 1.5 in. lever with a .75 in. nylon roller on the open side.
There are list price adders for double-pole circuitry and the actuators. (Levers
may also be ordered separately by specifying the LSX listings shown in the
actuator code description.)
ORDER GUIDE
LSX standard weather-sealed explosion-proof switch.
Typical Catalog Listing: LSX A 3K
Head Code
A*
Side rotary. Momentary.
P
Side rotary. Low
differential travel.
Momentary.
R*
Side rotary. Low torque.
Momentary.
V
Adjustable top plunger.
Momentary.
H
Side rotary. Low
differential travel and low
torque. Momentary.
N*
Side rotary. Maintained
contact.
B*
Top rotary. Momentary.
W*
Adjustable side plunger.
Momentary.
C
Top plunger. Momentary.
D
Top roller plunger.
Momentary.
E*
Side plunger.
Momentary.
F*
Side roller plunger.
Momentary.
J
Wobble
stick.
Momentary.
K
Cat
whisker.
Momentary.
* Available with a Single Pole N.C. Direct Acting contact.
Electrical Rating D. To order, use 3N for body and circuitry
code.
Body and Contacts
Circuitry Code
3K Silver
3E Gold plated
Single-pole, 1 N.O., 1
N.C.,
1
2
in. conduit.†
4K
3
4
in. conduit†
4L Silver
4S Gold plated
Double-pole, 2 N.O., 2
N.C.,
3
4
in. conduit.†
7L Silver
1
2
in. conduit†
7S Gold plated
3N SPNC Direct Acting
L
Side rotary. Sequence
operation.
4M Silver
4T Gold plated
Sequential. Pole 1
operates before Pole 2
(CW, CCW or both).
3
4
in.
conduit.†
7T Gold plated
1
2
in.
conduit.
M
Side rotary. Center
neutral.
4N Silver
4U Gold plated
Center neutral. Pole 1
operates CCW, Pole 2
operates CW.
3
4
in.
conduit.†
7U Gold contacts
1
2
in.
conduit
V
V
V
Only
Only
Limit and Enclosed Switches LSX Series
Weather-Sealed Explosion-Proof Switches
Honeywell1 Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 CanadaA115
ELECTRICAL RATINGS
Same as HDLS, see page A34.
OPERATING CHARACTERISTICS
See next page.
TEMPERATURE RATINGS
Same as HDLS, see page A56.
ENVIRONMENTAL SEAL PERFORMANCE
Same as HDLS, see page A56.
LOW TEMPERATURE and HIGH TEMPERATURE SEALED
See next page.
1A
Actuation
Direction
Modification Code
(No additional cost.)
No Code.
CW and CCW. (Head
types A, B, H, L, P, R.)
1
CW operation.
(Optional with head
types A, B, H, L, P, R.)
2
CCW operation.
(Optional with head
types A, B, H, L, P, R.)
Head/Actuator
Orientation
Modification Code
(No additional cost.)
No Code.
Side rotary heads
assembled with
actuator shaft facing
front. Roller on top
roller plungers
assembled parallel to
mounting surface.
3
Head
assem-
bled
with
actuator
shaft to
right side.
(Optional with head
types A, E, F, H, L, M,
N, P, R.)
4
Head
assem-
bled
with
actuator
shaft to left side.
(Optional with head
types A, E, F, H, L, M,
N, P, R.)
5
Head
assem-
bled
with
actuator
shaft to
back of
switch. (Optional with
head types A, E, F, H,
L, M, N, P, R.)
6
Roller on
top roller
plungers
assembled
perpendicular
to mounting surface.
(Optional with head
type D.)
8
Roller on side plunger
is assembled in vertical
position.
Actuator Code
1
LSZ51 lever
(no roller).
1A
LSZ51A lever
with .75 in. nylon
roller on front side.
1C
LSZ51C lever
with nylon roller
on back side.
2C
LSZ52C
adjust-
able
lever (1.5-3.5 in.) with .75 in. nylon
roller.
2J
LSZ52J
adjust-
able
lever (1.5-3.5 in.) with 1 in. nylon roller.
2K
LSZ52K
adjust-
able
lever (1.5-3.5 in.) with 1.5 in. nylon
roller.
3S
LSZ53S yoke lever
with .75 in. nylon
rollers (same side).
3E
LSZ53E yoke lever
with .75 in. nylon
roller (one ea. side).
4M
LSZ54M
aluminum rod
actuator.
4
LSZ54 hub for
rod actuator.
5
LSZ55 offset lever
(no roller).
5A
LSZ55A offset lever
with .75 in. nylon
roller on back side.
5C
LSZ55C offset lever
with .75 in. nylon
roller on front side.
7A
Wobble stick actuator. (Use with head
type J only.)
8A
Cat whisker actuator. (Use with head
type K only.)
1.5 in. long levers, except where noted.
Limit/ Enclosed
Limit and Enclosed Switches LSX Series
Weather-Sealed Explosion-Proof Switches
A116Honeywell1 Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 Canada
OPERATING CHARACTERISTICS
Rotary actuated switches
Side Rotary
Center Top Rotary
Momentary Maintained Sequence Neutral Momentary
LSXP LSXH LSXL LSXM
LSXA Low Diff. LSXR Low Diff. (Double Pole (Double Pole
Standard Travel Low Torque Low Torque LSXN Only) Only) LSXB
Pretravel max. 15°9°15°9°65°1st step 15°18°25°
2nd step 10°
additional
Overtravel min. 60°66°60°66°20°48°57°100°
Differential SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT
Travel max. 5°7°3°4°5°7°3°4°30°35°5°10°10°12°
Operating 0,45 Nm 0,45 Nm 0,19 0,19 Nm 0,45 Nm 0,45 Nm 0,45 Nm 0,28 Nm
Torque max. 4 in. lbs. 4 in. lbs. 1.7 in. lbs. 1.7 in. lbs. 4 in. lbs. 4 in. lbs. 4 in. lbs. 2.5 in. lbs.
Operating 10 to 250°F 30 to 250°F 10 to 250°F 30 to 250°F
Temp. Range 12 to 121°C 1 to 121°C 12 to 121°C 1 to 121°C
Nm JNewton meters
Plunger actuated switches
Momentary
LSXC LSXD LSXE LSXF
Top Plunger Top Roller Plunger Side Plunger Side Roller Plunger
Pretravel max. 1,78mm 1,78mm 2,54mm 2,54mm
.070 in. .070 in. .100 in. .100 in.
Differential Travel max. SPDT DPDT SPDT DPDT
0,38mm 0,51mm 0,38mm 0,51mm 1,14mm 1,14mm
.015 in. .020 in. .015 in. .020 in. .045 in. .045 in.
Overtravel min. 4,83mm 4,83mm 4,83mm 4,83mm
.190 in. .190 in. .190 in. .190 in.
Operating Force max. 17,8 N 17,8 N 26,7 N 26,7 N
4 lbs. 4 lbs. 6 lbs. 6 lbs.
Operating Point 58,5 ±0,76mm 68,6 ±1mm 33,0 ±0,76mm 44,1 ±1mm
2.305 ±.030 in. 2.700 ±.040 in. 1.300 ±.030 in. 1.735 ±.040 in.
Operating Temperature Range 12 to 93°C
10 to 200°F
Wobble Actuated Switches
Momentary
LSXJ LSXK Cat Whisker
Delrin Rod (Wire)
Radius approx.
Pretravel max. 25,4mm 50,8mm
1.0 in. 2.0 in.
Operating Force max. 2,78 N 1,39 N
10 oz. 5.0 oz.
Operating Temperature Range 12 to 93°C
10 to 200°F
N JNewtons
COMPLETELY FLUOROCARBON-
SEALED AND LOW TEMPERATURE
SWITCHES
Completely fluorocarbon-sealed and low
temperature construction LSX switches are
available. See page A42 for a full description
of both of these options.
How to order
For fluorocarbon-sealed switches, insert
the additional letters Y and C in the appropri-
ate places in the standard catalog listing; for
low temperature versions insert the addi-
tional letters Y and B. Examples follow:
LSXA3K—standard side rotary switch
LSXYAC3K—completely fluorocarbon-
sealed version of the LSXA3K
LSXA3K—standard side rotary switch
LSXYAB3K—low temperature version of
the LSXA3K
Limit and Enclosed Switches LSX Series
Weather-Sealed Explosion-Proof Switches
Honeywell1 Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 CanadaA117
ADAPTER PLATE
Catalog Listing LSXZ4022 adapter plate en-
ables the explosion-proof LSX to be mount-
ed on existing HDLS mounting holes. The
LSX has a recessed back into which the
adapter plate fits and mounts, using two
screws (furnished).
REPLACEMENT PARTS
Operating Heads
Catalog Listing
Switch Type Operating Head Only
LSXA LSZ1A
LSXB LSZ1B
LSXC LSXZ1C
LSXD LSXZ1D
LSXE LSXZ1E
LSXF LSXZ1F
LSXH LSZ1H
LSXJ LSZ1JGA
LSXK LSXZ1KHA
LSXL LSZ1L
LSXM LSZ1M
LSXN LSZ1N
LSXP LSZ1P
LSXR LSZ1R
Contact Blocks
Circuitry Contact Block
Single Pole LSXZ3K
Double Pole LSXZ3L
Sequence or Center Neutral LSXZ3M
MOUNTING DIMENSIONS (For reference only)
TOP SIDE
ROTARY ROTARY
Conduit Openings
(LSXA3, LSXB3, LSXH3, LSXN3,
LSXP3 and LSXR3 have 12-14 NPT.
LSXA4, LSXB4, LSXH4, LSXLR,
LSXM4, LSXN4, LSXP4, and LSXR4 have 34-14 NPT.
Limit/ Enclosed
Limit and Enclosed Switches LSX Series
Weather-Sealed Explosion-Proof Switches
A118Honeywell1Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 Canada
MOUNTING DIMENSIONS (For reference only)
TOP PLUNGER TOP ROLLER PLUNGER
CAT WHISKER WOBBLE STICK
TOP PLUNGER TOP ROLLER PLUNGER
Conduit Openings
(LSXJ3, and LSXK3 have 12-14 NPT.)
(LSXJ4 and LSXK4 have 34-14 NPT.)
Conduit Openings
(LSXE3 and LSXF3 have 12-14 NPT.
LSXE4 and LSXF4 have 34-14 NPT).
Conduit Openings
(LSXC3 and LSXD3 have 12-14 NPT.
LSXC4 and LSXD4 have 34-14 NPT).