OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
Automation & Sensing
Table of Contents LED Lighting - Pg. 1 Automation & Sensing - Pg. 21 Safety - Pg. 281 Switching & Controls - Pg. 483 Index - Pg. 1039
www.IDEC.com/powersupply
Power
Supplies
Selection Guide .......................................... 166
PS6R Standard Series ................................ 167
Part Numbers ................................................ 167
Specications ................................................ 168
Dimensions ................................................... 170
PS5R-V Series ............................................ 174
Part Numbers ................................................ 174
Specications ................................................ 175
Dimensions ................................................... 178
PS5R Slim Line Series ................................ 182
Part Numbers ................................................ 183
Specications ................................................ 184
Dimensions and Terminal Markings ............. 186
PS5R Standard Series ................................ 188
Part Numbers ................................................ 188
Specications ................................................ 189
Dimensions ................................................... 192
PS3X Series ................................................ 193
Part Numbers ................................................ 193
Specications ................................................ 194
Dimensions ................................................... 196
Safety Precautions ........................................ 198
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
Selection Guide Power Supplies
166 www.IDEC.com 1706131649
Selection Guide
Series PS6R PS5R-V PS5R Slim Line PS5R PS3X PS3L
Appearance
Page 167 174 182 188 193 Visit www.IDEC.com/
powersupply
Housing Metal Plastic Metal Metal
Mounting DIN Rail DIN Rail or surface
mount; 6 direction DIN Rail or surface mount Direct or DIN Rail mount Panel or bracket mount
Wattage Range 120W to 480W 7.5W to 240W 10W to 240W 7.5W to 480W 15W to 100W 10W to 300W
Input Voltage 100 to 240 V A,
110 to 350V DC
85 to 264V AC,
100 to 370V DC
85 to 264 V AC,
100-370 V DC (100-350V
DC, 120W & 240W)
85 to 264V AC,
105 to 370V DC
85 to 264V AC,
120 to 375V DC
85 to 264V AC,
105 to 370V DC
Output
Current
Ratings
5V DC 2A 1.5A, 2.0A 2.0A 1.5A, 2.5A 3A, 5A, 12A, 16A 2A, 3A, 6A
12V DC 1A 0.6A, 1.3A, 2.5A 1.2A, 2.5A 0.6A, 1.2A, 2.5A 1.3A, 2.1A, 4.2A, 6A, 8.5A 0.90A, 1.4A, 2.5A, 4.3A,
8.5A, 13A
24VDC 5A, 10A, 20A
0.3A, 0.65A, 1.3A,
2.5A, 3.75A, 5.0A,
10.0A
0.65A, 1.3A, 2.5A, 3.75A,
5A, 10A
0.30A, 0.60A, 1.3A, 2.1A,
3.1A, 4.2A, 5A, 10A, 20A
0.63A, 1.1A, 2.2A, 3.2A,
4.5A
0.50A, 0.70A, 1.3A,
2.2A, 4.5A, 6.5A, 12.5A
Typical
Efciency
5V DC
up to 93%
up to 77% 69% 69% 77% 70-75%
12V DC up to 85% 75%, 78% 73% to 75% 81% to 82% 74% to 80%
24V DC up to 90% 80% to 84% 75% to 91% 82% to 84% 78% to 82%
Voltage Adjustments +/-10% +/-10% (+/- 5% for
90W) +/-10% (V.ADJ control on front)
Ripple Voltage 1.5%peak to peak
max (including noise) - 2% peak to peak max (including noise) – 160mV maximum
Overvoltage
Protection (input) 120% - 120% or more, auto reset 120% typical 115% typical 120% typical
Overcurrent
Protection (output)
105 to 120% (auto
reset)
105% minimum (101%
for 90W), auto reset 105% min shutdown 105% minimum (Zener or
auto reset)
Operating Temperature -10˚ to +70°C (14° to
140°F) -25°C to +75°C -10° to +70°C (14° to 140°F) -10° to +85°C -10° to +60°C (14° to
140°F)
Termination M3.5 phillip/slotted, spring loaded, captive (ngersafe) M3 or M3.5 IEC Style screw
terminals (ngersafe)
Approvals
ANSI/ISA-12.12.01-2011 Listed
File#E234997
ANSI/ISA-12.12.01-2011 Listed
File#E234997
ANSI/ISA-12.12.01-2011 Listed
File#E234997
(SEMI F47 120W &
240W only)
UL508 Listed
File #E177168
Cert No.
BL980213332392
UL508 Listed
File #E177168
167
800-262-IDEC (4332) • USA & Canada
PS6R Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
PS6R Series Switching Power Supplies
Expandable and space-saving switching power supplies. High efciency reduces operation costs.
• 93% efciency
• Plug-in output modules for additional output voltages
• Plug-in branch terminal module for additional terminals
• Power Range: 120W, 240W, 480W
• Input voltage: 100 to 240V AC
(voltage range: 85 to 264V AC/110 to 350V DC)
• Up to 70ºC (158ºF) operating temperature
• DC low LED indicator and output contact
• The terminals are captive spring-up screws. Ring or fork
terminals can be used.
• Finger-safe construction prevents electric shocks.
• Panel mount bracket and side-mount panel mounting
bracket. Can be attached to a DIN rail or directly to a panel
surface.
• RoHS compliant
• UL listed for Class 1, Division 2 Hazardous Locations
• Meets SEMI F47 Sag Immunity
• ABS Certied for maritime use
60mm 85mm
37mm
Applicable Standards Mark File No. or Organization
UL508
CSA C22.2 No. 107.1
CUS
LISTED
UL/c-UL Listed
File No. E177168
EN60950-1
EN50178
EN61204-3
TÜV SÜD
EU Low Voltage Directive
EMCD
Part Numbers
PS6R
Output
Capacity* Part No. Input Voltage Output
Voltage
Output
Current
120W PS6R-F24
85 to 264V AC 21.6 to 26.4V
5A
240W PS6R-G24 10A
480W PS6R-J24 20A
*Output voltage × output current = output capacity
120W shown with Branch Terminal module attached.
Accessories
Item Part No. Note
Output Voltage Expansion
Module Note 1 PS9Z-6RM1 Output: +5V, 2A, 10W
PS9Z-6RM2 Output: +12V, 1A, 12W
PS9Z-6RM3 Output: +5V, 1A/-5V, 1A, 10W
PS9Z-6RM4 Output: +15V, 0.4A/-15V, 0.4A, 12W
PS9Z-6RM5 Output: +5V, 1A/+12V, 0.5A, 11W
PS9Z-6RM6 Output: +12V, 0.5A/-12V, 0.5A, 12W
Branch Terminal Module Note 2
PS9Z-6RS1 Additional screw terminals for wiring:
2 + terminals / 2 - terminals
Panel Mounting Bracket PS9Z-6R1F
Side-mount Panel Mounting
Bracket PS9Z-6R2F Supplied with M3 × 6 countersunk
mounting screws
DIN Rail BNDN1000 1,000mm
DIN Rail End Clip BNL6
1. When using an output voltage expansion module, reduce 1A from the output current of PS6R.
2. When using a branch terminal module, the total voltage/current of PS6R and the branch terminal
module should not exceed the rated current/voltage of PS6R
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS6R Series Power Supplies
168 www.IDEC.com 1706131649
Specications
PS6R
Part No. PS6R-F24 PS6R-G24 PS6R-J24
Input
Input Voltage 100 to 240V AC
(Voltage range: 85 to 264V AC/110 to 350V DC) (Load ≤ 80% at 85 to 100V AC, 110 to 140V DC) Note 1
Frequency 50/60Hz
Input Current 100V AC 1.4A typ 2.7A typ 5.5A typ.
230V AC 0.7A typ 1.2A typ 2.3A typ.
Inrush
Current
100V AC
9A max. (Ta=25
º
C, 100V AC cold start)
230V AC
20A max. (Ta=25
º
C, 230V AC cold start)
Leakage
Current
120V AC 0.5mA max.
230V AC 1mA max.
Efciency
(Typical)
100V AC 90% 90% 91%
230V AC 90% 91% 93%
Power Factor
(Typical)
100V AC 0.99 0.99 0.98
230V AC 0.96 0.97 0.97
Output
Rated Voltage/Current 24V/5A 24V/10A 24V/20A
Adjustable Voltage Range ±10%
Output Holding Time 20ms min. (at rated input and output)
Start Time
800ms max. (at rated input and output)
Rise Time
200ms max. (at rated input and output)
Regulation
Total Fluctuation ±5% max.
Input Fluctuation 0.4% max.
Load Fluctuation 0.6% max.
Temperature Change 0.05%/C max. (–10 to +60ºC)
Ripple (including noise)
1% p-p max. (0 to +60ºC)
1.5% p-p max. (–10 to 0ºC)
Supplementary
Functions
Overcurrent Protection
105 to 120% (auto reset) (output current when voltage drops by 5%)
Overvoltage Protection Output off at 120% Note 2
Operation Indicator LED (green)
Voltage Low Indication LED (amber)
Dielectric
Strength
Between input and output terminals 3000V AC, 1 minute
Between input and ground terminals 2000V AC, 1 minute
Between output and ground terminals 500V AC, 1 minute
Insulation Resistance 100M min. 500V DC megger (between input and output terminals/between input and ground terminals)
(at room temperature and normal humidity)
Operating Temperature –10 to +70ºC (no freezing) Note 3
Operating Humidity 20 to 90% RH (no condensation)
Storage Temperature –25 to +75ºC (no freezing)
Storage Humidity 20 to 90% RH (no condensation)
Vibration Resistance 10 to 55 Hz, amplitude 0.375 mm (0.187mm using PS9Z-6R1F)
2 hours each in 3 axes, 6 directions
Shock Resistance 300 m/s2 (150 m/s2 when using a PS9Z-6R1F panel mounting bracket)
EMC EMI EN61204-3 (Class B)
EMS EN61204-3 (industrial)
Degree of Protection IP20 (IEC 60529)
Weight (approx.) 630g 960g 1400g
Terminal Screw M3.5 (See last page for wire sizes)
1. DC input voltage is not subjected to safety standards.
2.
One minute after the output has been turned off, turn on the input again.
3. See the output derating curves.
Easily Expandable
Output Voltage
Expansion Module
In addition to the standard 24V
output, additional 5, 12, and 15V
outputs can be added.
Branch Terminal Module
Two terminals can be added.
No wiring is required, reducing
installation space.
169
800-262-IDEC (4332) • USA & Canada
PS6R Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Accessories (For use with PS6R)
Part No. Output Voltage Expansion Module Branch Terminal Module
PS9Z-6RM1 PS9Z-6RM2 PS9Z-6RM3 PS9Z-6RM4 PS9Z-6RM5 PS9Z-6RM6 PS9Z-6RS1
Input Voltage 24V DC
Output Capacity 10W max. 12W max. 10W max. 12W max. 11W max. 12W max. —
Output
Rated Voltage/Current 5V/2A 12V/1A ±5V 2A ±15V 0.4A 5V/1A,
12V/0.5A ±12V 0.5A 24V/10A max. Note 1
Adjustable Voltage Range
Not available
Voltage Accuracy ±5% max. —
Start Time 200 ms max. (at rated input and output) —
Regulation
Input Fluctuation 0.5% max.
—
Load Fluctuation 1.0% max.
Temperature
Change 0.05%/max. (–10 to +60°C)
Ripple (including
noise) 100mV max. 150mV max. 100mV max., 150mV max.
Supplementary
Functions
Overcurrent Protection 105% (auto reset) —
Overvoltage Protection Output off at 120%
Operating Temperature –10 to +70°C (no freezing) Note 2
Operating Humidity 20 to 90%RH (no condensation)
Storage Temperature –25 to +75°C (no freezing)
Storage Humidity 20 to 90% RH (no condensation)
Vibration Resistance 10 to 55 Hz, amplitude 0.375 mm, 2 hours each in 3 axes, 6 directions (in combination with PS6R-J24)
Shock Resistance 300 m/s2 (150 m/s2 when using a PS9Z-6R1F panel mounting bracket),
3 shocks each in 6 axes (in combination with PS6R-J24)
EMC EMI EN61204-3 (Class B) (in combination with PS6R-24) —
EMS EN61204-3 (industrial) (in combination with PS6R-24)
Safety Standards UL508 (Listing), CSA C22.2 No.107.1, IEC/EN60950-1, EN50178 (in combination with PS6R-24)
Degree of Protection IP20 (IEC 60529)
Weight (approx.) 90g 30g
Terminal Screw M3.5 (See last page for wire sizes.)
1. Ensure that the current does not exceed the rated current of the PS6R.
2. See the output derating curves.
Wide Operating Termperature Range Energy-saving 93% Efciency (480W)
–10 010203040506
070
0
10
20
30
40
50
60
70
80
90
100
Operates without derating
at 0 to 60ºC
Operates at –10 to 70ºC
Output Current (%)
Operating Temperature (°C)
80
82
84
86
88
90
92
94
96
50 100150 200250 300
PS6R-J24
Competitor A
Competitor B
Efciency (%)
Input Voltage (V AC)
Easy Maintenance - LED Indicator
Status Normal Overload or Input
Voltage Low*
Output
short-circuit
Output
OFF
DC ON
(green LED)
DC Low
(amber LED)
*The LEDs turn on when the input voltage drops.
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS6R Series Power Supplies
170 www.IDEC.com 1706131649
Dimensions (mm)
PS6R-F24
106.5
A A
9.3
37
35.3 44.9
125 4
1254.5
3.8
6 - M3.5
Terminal Screws
A = 9.5
PS6R-G24
60
A
106.5 9.3
35.3 44.9
4
125
4.5
3.8
125
8 - M3.5
Terminal Screws
A
AAA
A
A = 9.5
PS6R-J24
A
85
9.3106.5
10-M3.5
Terminal Screws
A
A A AAA A
35.3 44.9
4
1254.5
3.8
125
A = 9.5
PS9Z-6R1F Panel Mounting Bracket
135
145
28
39
28
135
28
4-M4 or ø4-4.5 holes
Panel cut-out
When a PS9Z-6R1F is installed on PS6R
(Front view) (Side view)
AA
145
10
130.6
10
PS9Z-6R2F (Side-mount Panel Mounting Bracket)
56
138.5
56
148.6
70
138.5
56
4-M4 or ø4-4.5 holes
Panel cut-out
When a PS9Z-6R2F is installed on PS6R
C D
11.8
11.8
148.6
B
Mounting Screws
(M3 × 6 countersunk screw)
(Front view) (Side view)
When using a PS9Z-6RM*
Output Voltage Expansion Module
When using a PS9Z-6RS1
Branch Terminal Module
E
107.2 27.8
59
34.4 9.3
53
33.4
9.6
21
59
Mounting
Screws
Mounting
Screws
Dimension Table
A B C D E
PS6R-F24 –39.3 29.5 29.5 58
PS6R-G24 10.5 62.3 29.5 31 81
PS6R-J24 23 87.3 29.5 31 106
171
800-262-IDEC (4332) • USA & Canada
PS6R Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Operating Instructions
The PS6R should be placed in a proper enclosure. It is designed to be
used with general electrical equipment and industrial electric devices.
Operation Notes
1. Output interruption may indicate blown fuses. Contact IDEC.
2. The PS6R contains an internal fuse for AC input. When using DC input,
install an external fuse or DC input. To avoid blown fuses, select a fuse in
consideration of the rated current of the internal fuse.
Rated Current of Internal Fuses
Part No. Internal Fuse Rated Current
PS6R-F24 4A
PS6R-G24 6.3A
PS6R-J24 10A
- Avoid overload and short-circuit for a long period of time,
otherwise internal elements may be damaged.
- DC input operation is not subjected to safety standards.
Installation Notes
• The PS6R can be installed in the direction shown below only.
Vertical When using PS9Z-6R1F
Panel Mounting Bracket
When using PS9Z-6R2F
Side-mount Panel Mounting
Bracket
Up
• Do not close the top and bottom openings of the PS6R to allow for heat radia-
tion by convection.
• Maintain a minimum of 20mm clearance around the PS6R, except for the top
and bottom openings.
• When derating of the output does not work, provide forced air-cooling.
• Make sure to wire the ground terminal correctly.
• For wiring, use wires with heat resistance of 60ºC or higher.
Use copper wire of the following sizes. Wires of the following sizes must be
used to comply with UL508, CSA C22.2 No. 107.1.
Model
Terminal
Wire Size/No. of Wire Wire Type Torque,
in-ibs (Nm)
PS6R-F24
PS6R-G24
Input
18-14 AWG, 1-wire
Copper
Solid/Stranded
7.0 (0.8)
Output
18-14 AWG, 1-wire, (18 AWG - 7A,
16 AWG - 10A, 14 AWG - 15A)
DC OK
Output
22-14 AWG, 1-wire (stripped wire
length: 6 to 7mm)
PS6R-J24
Input
18-14 AWG, 1-wire
Output
18-14 AWG, 2-wire
Use the same size wire for each
terminal (18 AWG - 7A,
16 AWG - 10A, 14 AWG - 15A)
12 AWG, 1-wire
Copper
Solid/Stranded
Use with UL-listed ring/
fork crimp terminal.
DC OK
Output
22-14 AWG, 1-wire (stripped wire
length: 6 to 7mm)
Copper
Solid/Stranded
—
PS9Z-6R0Output
18-14 AWG, 1-wire (18 AWG - 7A,
16 AWG -10A, 14 AWG - 15A)
7.0 (0.8)
Applicable Crimp Terminal (reference)
6.6 max.
ø3.6 min.
5.5 min.4 max.
• Recommended tightening torque of the input and output terminals is 0.8N·m.
• The output voltage can be adjusted within ±10% of the rated output voltage
by using the V.ADJ control. Note that overvoltage protection may work when
increasing the output voltage.
• When large shocks or heavy vibrations on the PS6R are expected, the use of
DIN rail or PS9Z-6R2F side-mount panel mounting bracket is recommended.
Series Operation
The following series operation is allowed. Connect Schottky barrier diodes as
shown below. Output voltage expansion modules cannot be connected in series.
L
N
L
N
+V
–V
L
N
+V
–V
Load
(a)
L
N
L
N
+V
–V
L
N
+V
–V
Load
Load
(b)
Select a Schottky diode in consideration of the rated current. The diode’s reverse
voltage must be higher than the PS6R’s output voltage.
Parallel Operation
Parallel operation is possible to increase the output capacity. Output voltage
expansion modules cannot be connected in series.
L
N
L
N
+V
–V
L
N
+V
–V
Load
When increasing the capacity, observe the following.
1. Maintain the operating temperature below 40ºC.
2. Output cannot be connected directly in parallel operation. Connect a diode to
the output of each PS6R.
3. Output terminal voltage of both power supplies must be the same. Also,
maintain the voltage difference between the power supplies below 30mV.
4. Use load lines of the same diameter and length.
5. Set the output voltage higher for the amount of diode forward voltage drop.
6. Turn on the inputs at the same time.
7. Select a diode in consideration of:
Diode’s reverse voltage must be higher than the PS6R’s output voltage.
Diode’s current must be three times the PS6R’s output current. Provide a heat
sink for heat dissipation.
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS6R Series Power Supplies
172 www.IDEC.com 1706131649
PS6R-J24 PS6R-6RM1/M2/M3
Output Voltage Expansion Module
PS9Z-6RM3/M4/M6
Output Voltage Expansion Module
(PS6R-6RM5 shown)
PS6R-6RS1
Branch Terminal Module
PS6R-24/PS9Z-6RS1
Marking Name Description
L, N Input Terminal Voltage range: 85 to 264V AC/110 to 350V DC
Ground Terminal Be sure to connect this terminal to a proper ground.
+V, –V DC Output Terminals +V: Positive output terminal
–V: Negative output terminal
VR.ADJ Output Voltage Adjustment Allows adjustment within ±10%. Turning clockwise increases the output voltage.
DC ON Operation Indicator (green) Lights on when the output voltage is on.
DC LOW Output Low Indicator (Amber) Lights on when the output voltage drops approximately 80% of the rated value.
DC OK DC OK Output Lights on when the output voltage is more than 80% of the rated value.
NPN transistor output (50V DC max., 50 mA max.)
PS9Z-6RM
Marking Name Description
+5V, +12V, +15V DC Output Terminal +5V side, +12V side, +15V side
-5V, -12V, -15V DC Output Terminal -5V side, -12V side, -15V side
COM DC Output Terminal 0V side (wired internally to –V of PR6R-J24)
Characteristics
Operating Temperature approved by Safety Standards
Part No. UL508, CSA C22.2 No.
107. 1 EN60950-1, EN50178
PS6R-F24 60ºC 60ºC
PS6R-G24 60ºC 60ºC
PS6R-J24 55ºC 60ºC
PS9Z-6R 55ºC 60ºC
Output Current vs. Input Voltage
(Derating Curves) (Ta=25ºC)
Overcurrent Protection Characteristics
PS6R-24
Overcurrent Protection
Characteristics PS9Z-6RM*
–10 010203040506
070
0
10
20
30
40
50
60
70
80
90
100
Output Current (%)
Operating Temperature (ºC)
85 100
0
10
20
30
40
50
60
70
80
90
100
264
350
110 140
(ACV)
(DCV)
Output Current (%)
Input Voltage(V)
95%
120%
F24
G24
J24
105%
100
100
Output Voltage (%)
Input Current (%)
Pulse Current
(Approx. 30A rms, 40A peak)
0
0
24
Operating Temperature vs.
Output Current (Derating Curves)
173
800-262-IDEC (4332) • USA & Canada
PS6R Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Parts Description
PS6R-J24 PS6R-6RM1/M2/M3
Output Voltage Expansion Module
PS9Z-6RM3/M4/M6
Output Voltage Expansion Module
PS6R-6RS1
Branch Terminal Module
(PS6R-6RM5 shown)
PS6R-24/PS9Z-6RS1
Marking Name Description
L, N Input Terminal Voltage range: 85 to 264V AC/110 to 350V DC
Ground Terminal Be sure to connect this terminal to a proper ground.
+V, –V DC Output Terminals +V: Positive output terminal
–V: Negative output terminal
VR.ADJ Output Voltage Adjustment Allows adjustment within ±10%. Turning clockwise increases the output voltage.
DC ON Operation Indicator (green) Lights on when the output voltage is on.
DC LOW Output Low Indicator (Amber) Lights on when the output voltage drops approximately 80% of the rated value.
DC OK DC OK Output Lights on when the output voltage is more than 80% of the rated value.
NPN transistor output (50V DC max., 50 mA max.)
PS9Z-6RM
Marking Name Description
+5V, +12V, +15V DC Output Terminal +5V side, +12V side, +15V side
-5V, -12V, -15V DC Output Terminal -5V side, -12V side, -15V side
COM DC Output Terminal 0V side (wired internally to –V of PR6R-J24)
Characteristics
Operating Temperature vs.
Output Current (Derating Curves)
Output Current vs. Input Voltage
(Derating Curves) (Ta=25ºC)
Overcurrent Protection Characteristics PS6R-24 Overcurrent Protection Characteristics
PS9Z-6RM*
–10 010203040506
070
0
10
20
30
40
50
60
70
80
90
100
Output Current (%)
Operating Temperature (ºC)
85 100
0
10
20
30
40
50
60
70
80
90
100
264
350
110 140
(ACV)
(DCV)
Output Current (%)
Input Voltage(V)
95%
120%
F24
G24
J24
105%
100
100
Output Voltage (%)
Input Current (%)
Pulse Current
(Approx. 30A rms, 40A peak)
0
0
24
Operating Temperature approved by Safety Standards
Part No. UL508, CSA C22.2 No. 107. 1 EN60950-1, EN50178
PS6R-F24 60ºC 60ºC
PS6R-G24 60ºC 60ºC
PS6R-J24 55ºC 60ºC
PS9Z-6R 55ºC 60ºC
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS5R-V Series Power Supplies
174 www.IDEC.com 1706131649
PS5R-V Series
Switching Power Supplies
Standards Compliance
Applicable Standards Mark File No. or Organization
UL508
UL13101
ANSI/ISA 12.12.01
CSA C22.2 No.107.1
CSA C22.2 No.213
CSA C22.2 No.2231
UL/c-UL Listed
File No. E467154, E177168
EN60950-1
EN50178
EN61204-3
EN50581
TÜV SÜD²
EU Low Voltage Directive,
EMC Directive
RoHS Directive
SEMI F47 — EPRI
Note 1: PS5R-VA/VB/VC/VD/VE only
Note 2: EN60950-1, EN50178 only
Part Numbers
Output Capacity Part Number Input Voltage Output Voltage Output Current
7.5W
PS5R-VA05
100 to 240V AC
(Voltage range: 85 to 264V AC /
100 to 370V DC)
5V 1.5A
PS5R-VA12 12V 0.6A
PS5R-VA24 24V 0.3A
10W PS5R-VB05 5V 2.0A
15W PS5R-VB12 12V 1.3A
PS5R-VB24 24V 0.65A
30W PS5R-VC12 12V 2.5A
PS5R-VC24 24V 1.3A
60W PS5R-VD24 24V 2.5A
90W PS5R-VE24 24V 3.75A
120W PS5R-VF24 24V 5.0A
240W PS5R-VG24 24V 10.0A
Part Number Structure
Note 3: PS5R-VA/VB only
Note 4: PS5R-VA/VB/VC only
Use only for interpreting part numbers.
Do not use for developing part numbers.
PS5R - V
Output Voltage
05: 5V3
12: 12V4
24: 24V
Output Capacity
A: 7.5W
B: 10W/15W
C: 30W
D: 60W
E: 90W
F: 120W
G: 240W
DIN-rail mount switching power supplies with global approvals for
both industrial and hazardous locations
Key Features
• Compact size preserves panel space
• Slim size (width):
22.5mm (10W/15W/30W)
36mm (60W/90W)
45mm (7.5W)
46mm (120W)
60mm (240W)
• Universal Voltage Input:
85-264V AC/100-370V DC
• Wide operating temperature range
• Spring-up terminals accept ring & fork terminals
• Approved for use in Class I Division 2 hazardous locations
• Can be installed in 6 directions
• 7.5W ~ 90W meet NEC Class 2 output ratings
• Overcurrent protection with auto-reset
• Meets SEMI F47 Sag Immunity (208V AC input)
• RoHS compliant
• Five-year factory warranty
175
800-262-IDEC (4332) • USA & Canada
PS5R-V Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Specications
Model
5V DC output PS5R-VA05 PS5R-VB05 - - - - -
12V DC output PS5R-VA12 PS5R-VB12 PS5R-VC12 - - - -
24V DC output PS5R-VA24 PS5R-VB24 PS5R-VC24 PS5R-VD24 PS5R-VE24 PS5R-VF24 PS5R-VG24
Output Capacity 7.5W 15W (5V Model is 10W) 30W 60W 90W 120W 240W
Input
Rated Input Voltage
(Single-phase two-wire)1100 to 240V AC
(Voltage range: 85 to 264V AC/100 to 370V DC) (Load ≤ 80% at 100-105V DC)
Frequency 50/60 Hz
Input Current (Typ.) 100V AC 5V: 0.20A 12V, 24V: 0.18A 5V: 0.25A
12V, 24V: 0.35A 0.7A 1.3A 1.1A 1.4A 2.7A
230V AC 5V: 0.12A 12V, 24V: 0.10A 5V: 0.14A
12V, 24V: 0.19A 0.3A 0.8A 0.6A 0.7A 1.2A
Inrush Current (Typ.)
(Ta=25°C, cold start)
100V AC 15A 18A 14A
230V AC 36A 45A 41A 30A
Leakage Current 120V AC 0.5mA max.
230V AC 1.0mA max.
Efciency (Typ.)
(at rated output)2
100V AC 5V: 74%, 12V: 79%, 24V: 80% 5V: 77%, 12V: 82%, 24V: 84% 12V: 83%, 24V: 85% 86% 88%
89%
89%
230V AC 5V: 73%, 12V: 77%, 24V: 76% 5V: 73%, 12V: 80%, 24V: 81% 12V: 85%, 24V: 87% 86% 90%
Power Factor (Typ.) 100V AC — — — — 0.99
230V AC — — — — 0.86 0.92 0.96
Output
Rated Voltage/Current 5V/1.5A, 12V/0.6A, 24V/0.3A 5V/2.0A3, 12V/1.3A, 24V/0.65A 12V/2.5A, 24V/1.3A 24V/2.5A 24V/3.75A 24V/5A 24V/10A
Adjustable Voltage Range ±10% ±5% ±10%
Output Holding Time
(Typ.) (at rated output)
100V AC 45ms 5V: 53ms, 12V: 34ms, 24V: 36ms 12V: 13ms, 24V: 15ms 13ms 20ms 30ms
230V AC 285ms 5V: 330ms 12V: 215ms
24V: 230ms 12V: 110ms 24V: 110ms 105ms 30ms 33ms 40ms
Start Time
(at rated input and output)
500ms max. 500ms max. 600ms max. 800ms max. 700ms max. 800ms max.
Rise Time
(at rated input and output)
5V, 12V: 200ms max
24V: 250ms max 5V, 12V: 200ms max. 24V: 250ms max.
200ms max.
Regulation
Input Fluctuation 0.4% max.
Load Fluctuation 5V: 2.5% max. 12V, 24V: 1.0% max. 1.0% max.
Temperature Change 0.04%/°C max. (-10 to
+65°C ) 0.05%/°C max. (-10 to +65°C )
12V: 0.05%/°C max. (-10 to +50°C)
24V: 0.05%/°C max. (-10 to +55°C) 0.05%/°C max.
(-10 to +55°C )
0.05%/°C max.
(-10 to +50°C ) 0.05%/°C max.
(-25 to +55°C
)
0.05%/°C max.
(-25 to +50°C)
Ripple
(including noise)
5V: 8% p-p max. (-25 to -10°C)
12V: 6% p-p max. (-25 to -10°C)
24V: 4% p-p max. (-25 to -10°C)
5V:
8% p-p max. (-25 to -10°C)
12V:
6% p-p max. (-25 to -10°C)
24V:
4% p-p max. (-25 to -10°C)
12V:
6% p-p max. (-25 to -10°C)
24V:
4% p-p max. (-25 to -10°C)
4% p-p max. (-25 to -10°C)
5V: 5% p-p max. (-10 to +0°C)
12V: 2.5% p-p max. (-10 to +0°C)
24V: 1.5% p-p max. (-10 to +0°C)
5V: 5% p-p max. (-10 to +0°C)
12V: 2.5% p-p max. (-10 to +0°C)
24V: 1.5% p-p max. (-10 to +0°C)
12V:
2.5% p-p max. (-10 to +0°C)
24V:
1.5% p-p max. (-10 to +0°C)
1.5% p-p max. (-10 to +0°C)
5V: 2.5% p-p max. (0 to +65°C)
12V: 1.5% p-p max. (0 to +65°C)
24V: 1% p-p max. (0 to +65°C)
5V: 2.5% p-p max. (0 to +65°C)
12V: 1.5% p-p max. (0 to +65°C)
24V: 1% p-p max. (0 to +65°C)
12V: 1.5% p-p max. (0 to +50°C)
24V: 1% p-p max. (0 to +55°C)
1% p-p max. (0 to
+55°C) 1% p-p max. (0 to
+50°C) 1% p-p max. (0 to +55°C) 1% p-p max. (0 to
+50°C)
Overcurrent Protection
105% min. (auto reset)
101% min. (auto reset)
105% min. (auto reset)
Operation Indicator LED (green)
Dielectric
Strength
Between input and output terminals
3,000V AC, 1 minute
Between input and ground terminals
2,000V AC, 1 minute
Between output and ground terminals
500V AC, 1 minute
Insulation Resistance Between input and output terminals: 100M min. (500V DC megger) Between input and ground terminals: 100M min. (500V DC megger)
Operating Temperature4 (No freezing) -25 to +75°C -25 to +70°C -25 to +65°C
Operating Humidity (no condensation) 20 to 90% RH
Storage Temperature (No freezing) -25 to +75°C
Storage Humidity (no condensation) 20 to 90% RH
Vibration Resistance 10 to 55Hz, amplitude 0.375mm, 2 hours each in 3 axes
(when used with BNL6 end clips)
10 to 55Hz, amplitude 0.33mm, 2 hours each in 3 axes
(when used with BNL6 end clips)
10 to 55Hz, amplitude 0.375mm, 2 hours each in 3 axes
(when used with BNL8 end clips)
10 to 55Hz, amplitude 0.21mm, 2
hours each in 3 axes
(when used with BNL6 end clips)
10 to 55Hz, amplitude 0.375mm, 2
hours each in 3 axes (when used with
BNL8 end clips)
10 to 55 Hz, amplitude
0.375mm, 2 hours each
in 3 axes
(when used with part no.
BNL6 mounting clips)
Shock Resistance 300 m/s2 (30G), 3 times each in 6 directions
Expected Life58 years minimum (at the rated input, 50% load, operating temperature +40°C, standard mounting direction)
EMC EMI EN61204-3 (Class B)
EMS EN61204-3 (industrial)
Safety Standards UL508 (Listing), UL1310 Class 2, ANSI/ISA-12.12.01
CSA C22.2 No. 107.1, 213, 223 EN60950-1, EN50178 UL508 (Listing) ANSI/ISA-12.12.01
CSA C22.2 No. 107.1, 213 EN60950-1, EN50178
Other Standard SEMI F47 (at 208V AC input only)
Degree of Protection IP20 (EN60529)
Dimensions (mm) 75H × 45W × 70D 90H × 22.5W × 95D 95H × 36W × 108D 115H × 46W × 121D 125H × 60W × 125D
Weight (approx.) 130g 140g 150g 260g 310g 470g 960g
Terminal Screw M3.5
*At normal temperature and humidity unless otherwise specied.
Note 1: DC input voltage is not subject to safety standards. When using on DC input, connect a fuse to the input terminal for DC input protection.
Note 2: Under stable state.
Note 3: PS5R-VB05 (5V DC/2.0A) is 10W (Up to 3.0A at Ta = 0 to 40°C. Not subject to safety standards above 2.0A.)
Note 4: See the output derating curves.
Note 5: Calculation of the expected life is based on the actual life of the aluminum electrolytic capacitor. The expected life depends on operating conditions.
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS5R-V Series Power Supplies
176 www.IDEC.com 1706131649
Characteristics
Operating Temperature vs. Output Current (Derating Curves)
Conditions: Natural air cooling (Operating temperature is the temperature around the switching power supply.)
PS5R-VA05, -VA12, -VA24 PS5R-VB05, -VB12, -VB24 PS5R-VC12
Operating Temperature (˚C)
Mounting A,E
Mounting B, C, D, F
-30 -20 -10 0 10 20 30 40 50 60 70 80
0
10
20
30
40
50
60
70
80
90
100
Output Current (%)
Operating Temperature (˚C)
Mounting A
Mounting B, C, D, E, F
-30 -20 -10 0 10 20 30 40 50 60 70 80
0
10
20
30
40
50
60
70
80
90
100
Input Voltage:
85-100V AC
Output Current (%)
-30 -20 -10 0 10 20 30 40 50 60 70 80
0
10
20
30
40
50
60
70
80
90
100
Mounting A
Mounting B, C, D, E, F
Input Voltage:
85-100V AC
Output Current (%)
Operating Temperature (˚C)
PS5R-VC24 PS5R-VD24 PS5R-VE24
Mounting A, B
Mounting C
Mounting D, E, F
Input Voltage:
85-100V AC
-30 -20 -10 0 10 20 30 40 50 60 70 80
0
10
20
30
40
50
60
70
80
90
100
Output Current (%)
Operating Temperature (˚C)
Mounting E
Input Voltage:
85-100V AC
Mounting F
-30 -20 -10 0 10 20 30 40 50 60 70 80
0
10
20
30
40
50
60
70
80
90
100
Mounting B, C, D
Mounting A
Output Current (%)
Operating Temperature (˚C)
Mounting E
Mounting
B, C, D, F
Mounting A
Output Current (%)
-30 -20 -10 0 10 20 30 40 50 60 70 80
0
10
20
30
40
50
60
70
80
90
100
Operating Temperature (˚C)
PS5R-VF24 PS5R-VG24
Operating Temperature (˚C)
Mounting F
Mounting C, E
-30 -20 -10 0 10 20 30 40 50 60 70 80
0
10
20
30
40
50
60
70
80
90
100
Mounting B, D
Mounting A
Output Current (%)
Operating Temperature (˚C)
Mounting E
Mounting B
Mounting
C, D, F
Mounting A
Output Current (%)
-30 -20 -10 0 10 20 30 40 50 60 70 80
0
10
20
30
40
50
60
70
80
90
100
Input Voltage vs. Output Current (Derating Curves) Ta=25°C
PS5R-VB05, -VB12, -VB24, -VC12, -VC24, -VD24,
-VE24, -VF24 PS5R-VA05, -VA12, -VA24, -VG24
85 100 264
100
(ACV)
(DCV) 140 370
0
10
20
30
40
50
60
70
80
90
100
Input Voltage (V)
Output Current (%)
Output Current
(%)
Input voltage (V)
85 264
0
10
20
30
40
50
60
70
80
90
100
DC
AC
(ACV) 100
(DCV) 105100 370
Overcurrent Protection Characteristics
PS5R-VA/VB/VC/VD/VF PS5R-VE24 PS5R-VG24
-30
0 100 105 and over
0
100
Output Current (%)
Output Voltage (%)
Intermittent Operation
0
0
100
95
100
101 and over
Output Current (%)
Output Voltage (%)
Intermittent Operation
0
0
100
95
100
105 and over
Output Current (%)
Output Voltage (%)
Intermittent Operation
177
800-262-IDEC (4332) • USA & Canada
PS5R-V Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Operating Temperature Approved by Safety Standards
Part Number UL508, CSA C22.2 No.107.1, ANSI/ISA12.12.01, EN60950-1, EN50178
Mounting A Mounting B Mounting C Mounting D Mounting E Mounting F
PS5R-VA05, -VA12, -VA24 65 60 60 60 65 60
PS5R-VB05, -VB12, -VB24 65 60 60 60 60 60
PS5R-VC12 50 45 45 45 45 45
PS5R-VC24 55 55 50 45 45 45
PS5R-VD24 55 40 40 40 45 35
PS5R-VE24 50 40 40 40 45 40
PS5R-VF24 55 40 45 40 45 35
PS5R-VG24 50 35 30 30 45 30
Mounting Style
Mounting A
(Vertical, standard)
Mounting B
(Upright)
Mounting C
(Right side up)
Mounting D
(Left side up)
Mounting E
(Upside down)
Mounting F
(Downward)
Up
Front Panel
PS5R-VA PS5R-VB/VC PS5R-VD/
VE/VF
PS5R-VG Marking Name Description
L, N AC Input Terminal Voltage range: 85 to 264V AC/100 to 370V DC
Ground Terminal Be sure to connect this terminal to a proper
ground.
+V, -V DC Output Terminals +V: Positive output terminal
-V: Negative output terminal
VR.ADJ Output Voltage Adjustment
Allows adjustment within ±10%. (VE = ±5%)
Turning clockwise increases the output voltage.
Turning counterclockwise decreases the output
voltage.
DC ON Operation Indicator (green) Illuminates when the output voltage is on.
100 -240 VAC
INP UT
VR .
ADJ
ON
O U TP U T
L
INPUT 50/60Hz
VR.
ADJ
DC ON
N
-V
OUTPUT
+V
Accessories
Panel Mounting Bracket2
Applicable Switching Power Supply Part Number Remarks
PS5R-VB
PS5R-VC
PS9Z-5R1B —
PS9Z-5R2B For side mounting
PS5R-VD
PS5R-VE PS9Z-5R1C —
PS5R-VF PS9Z-5R1E —
PS5R-VG PS9Z-6R1F —
PS9Z-6R2F For side mounting
Note 2: Used when installing on a panel directly, PS5R-VA model does not require panel mounting bracket.
DIN Rail (35mm-wide)
1000mm BNDN1000 Aluminum
End Clip
Part Number
BNL6
BNL8
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS5R-V Series Power Supplies
178 www.IDEC.com 1706131649
Dimensions (mm)
PS5R-VA PS5R-VB/VC
PS5R-VA
26
75
7.35
6-M3.5
Screw Terminal 6
70
19.9
35.3
3.8
5
35
38.5
60
62.5
45
3.8
95
4.4 35.3 27.3
61.6
12.2 8.2
90
9.5
22.5
Screw Terminal
5-M3.5
PS5R-VD/VE PS5R-VF
36
95
79 8
20
10 10
108
3.8
4.5 24.935.3
5-M3.5
Screw Terminal
115
98 8.5
46
23
11.5 11.5
4.5 44.935.3
3.8
121
5-M3.5
Screw Terminal
PS5R-VG
35 .3 44 .9
10 6 .5
60
9.5 9.5 9.5 9.5
9.5 9.5
9.3
5.5
12 54.5
125
3.8
8-M3.5
Screw Terminal MTBF*
PS5R-VA: 1,150,000H minimum
MIL-HDBK-217FN2
(GB, 30°C)
PS5R-VB: 900,000H minimum
PS5R-VC: 650,000H minimum
PS5R-VD: 450,000H minimum
PS5R-VE: 380,000H minimum
PS5R-VF: 350,000H minimum
PS5R-VG: 290,000H minimum
*MTBF stands for Mean Time Between Failure, which is calculated according to
statistical device failures, and indicates reliability of a device. It is the statistical
representation of the likelihood of the unit to fail and does not necessarily repre-
sent the expected life of a product.
* 3-Phase
179
800-262-IDEC (4332) • USA & Canada
PS5R-V Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Panel Mounting Bracket When installed on switching power supply
Mounting hole layout
when installing on
a panel directly
Mounting hole layout
when installing on
a panel directly
Mounting hole layout
when installing on
a panel directly
Mounting hole layout
when installing on
a panel directly
Mounting hole layout
when installing on
a panel directly
Mounting hole
layout for side
mounting
Side View
Side View
Front View
Front View
Front View Side View
Front View Side View
Front View Side View
Side View Back View Mounting Screws
(4 -M3×6 countersunk screws)
13.616.4
96.7
5.5
28.8
10.0
10.0
12
112
102
26
105
10.2
9.9
109.8
12
24.7
112
120
102.0
110
44
62.9
26
38
105
115
36
48
125
135
36
125
10.2
9.9
122.8
135
145
28
39
28
135
28
10.5 10.5
145
10
130.6
56
138.6
56
148.6
138.6
56
70
62.3 29.5
11.8
31
11.8
PS9Z-5R1B
PS9Z-5R1C
PS9Z-5R1E
PS9Z-6R1F
PS9Z-6R2F Side-mount
PS9Z-5R2B Side-mount
2-M4 or 2- ø 4.5 holes
2-M4 or 2- ø 4.5 holes
2-M4 or 2- ø 4.5 holes
2-M4 or 2- ø 4.5 holes
4-M4 or 4- ø 4.5 holes
4-M4 or 4- ø 4.5 holes
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS5R-V Series Power Supplies
180 www.IDEC.com 1706131649
Safety Precautions
The PS5R-V should be placed in a proper enclosure. It is designed to be used with
general electrical equipment and industrial electric devices
• Do not use switching power supplies with electric equipment whose malfunction or
inadvertent operation may damage the human body or life directly.
• Make sure that the input voltage and output current do not exceed the ratings.
If the input voltage and output current exceed the ratings, electric shock, fire, or
malfunction may occur.
• Do not touch the terminals of the switching power supply while input voltage is
applied, otherwise electric shock may occur.
• Provide the final product with protection against malfunction or damage that may be
caused by malfunction of the switching power supply.
• Operating temperatures should not exceed the ratings. Be sure to note the derating
characteristics. If the operating temperature exceeds the ratings, electric shock, fire,
or malfunction may occur.
• Blown fuses indicate that the internal circuits are damaged. Contact IDEC for
repair. Do not just replace the fuse and reoperate, otherwise electric shock, fire, or
malfunction may occur.
• Do not use the switching power supplies to charge rechargeable batteries.
• Do not overload or short-circuit the switching power supply for a long period of time,
otherwise the internal elements may be damaged.
• Do not disassemble, repair, or modify the power supplies, otherwise the high voltage
internal part may cause electric shock, fire, or malfunction.
• The fuse inside the PS5R-V switching power supply is for AC input. Use an external
fuse for DC input.
Operating Instructions
Notes for installation
• Do not close the top or bottom openings of the PS5R-V to allow for heat radiation by
convection.
• When mounting multiple PS5R-V switching power supplies side by side, maintain a
minimum of 10 mm clearance. Observe the derating curves in consideration of the
ambient temperature.
10mm minimum
• When the derating voltage may exceed the recommended value, provide forced
air-cooling.
• Make sure to wire the ground terminal correctly.
• For wiring, use wires of heat resistance of 60C or higher (PS5R-VB: 80C or higher).
Use copper wire of the following sizes, according to the rated current.
Terminal Wire Size (allowable current) Wire Type
Input AWG 18 to 14
Copper Solid/Stranded
Output AWG18 to 14 (AWG18: 7A, AWG16: 10A,
AWG14: 15A)
Cross-Sectional are AWG18: 0.82mm2, AWG16: 1.31mm2, AWG14: 2.0mm2
Applicable crimp terminal (reference)
6.6 max.
4 max. 5.5 min.
ø3.6min.
• Recommended tightening torque of the input and output terminals is 1.0 to
1.3Nm (0.8N·m for UL).
Mounting on DIN Rails
1. Use a 35mm-wide DIN rail.
2.Place the PS5R-V on the DIN rail as shown with input terminal side up (➀),
and press the PS5R-V towards the DIN rail (➁). Make sure that the PS5R-V is
installed rmly.
3. Use BNL6 end clips to ensure power supplies do not slide off the end of the
DIN rail. Use of BNL8 end clips is recommended when excessive vibration or
shock is anticipated.
Removal
• Insert a flat screwdriver into the slot in the clamp, and pull out until it clicks (➀). The
lock mechanism is released and the PS5R-V can be removed (➁). When mounting the
PS5R-V again, push in the latch first.
Mounting Removal
Clamp
Installing a Panel Mounting Bracket
Latch
Latch
LOCK
LOCK
Panel Mounting Bracket (PS9Z-5R1, PS9Z-6R1F)
Panel Mounting Bracket (PS9Z-5R2B)
Power
Supply
Power
Supply
Tab
Tab
Slot
LOCK
UNLOCK
LOCK
UNLOCK
Push in the latch to LOCK
position.
Install the tab on the panel
mounting bracket into the slot
on the power supply.
Install the brackets as shown
on the left.
Ensure that the panel mounting
bracket is locked by the latch.
Pull out the latch to
UNLOCK position.
Insert the tab on the panel
mounting bracket into the slot
on the power supply.
Push in the latch to LOCK
position.
Ensure that the panel mounting
bracket is locked by the latch.
181
800-262-IDEC (4332) • USA & Canada
PS5R-V Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Installing PS9Z-6R2F Side-mount Panel Mounting Bracket
Install the bracket on the switching power supply using four M3 × 6 countersunk screws
supplied with the bracket. Recommended tightening torque is 0.5 to 0.6N.m (should be
in the center positions)
Latch
Latch
LOCK
LOCK
Panel Mounting Bracket (
PS9Z-5R1, PS9Z-6R1F)
Panel Mounting Bracket (
PS9Z-5R2B)
Power
Supply
Power
Supply
Tab
Tab
Slot
LOCK
UNLOCK
LOCK
UNLOCK
Push in the latch to LOCK
position.
Install the tab on the panel
mounting bracket into the slot
on the power supply.
Install the brackets as shown
on the left.
Ensure that the panel mounting
bracket is locked by the latch.
Pull out the latch to
UNLOCK position.
Insert the tab on the panel
mounting bracket into the slot
on the power supply.
Push in the latch to LOCK
position.
Ensure that the panel mounting
bracket is locked by the latch.
Adjustment of Output Voltage
The output voltage can be adjusted within ±10% (VE: ±5%) of the rated output voltage
by using the VR.ADJ control on the front. Turning the VR.ADJ clockwise increases the
output voltage. Turning the VR.ADJ counterclockwise decreases the output voltage.
Overcurrent Protection
The output voltage drops automatically when an overcurrent flows due to an overload or
short circuit. Normal voltage is auto matically restored when the load returns to normal
conditions.
Insulation/Dielectric Test
When performing an insulation/dielectric test, short-circuit the input (between L and N)
and output (between +V and -V). Do not apply or interrupt the voltage quickly, otherwise
surge voltages may be generated and the PS5R-V may be damaged.
Notes for Operation
• Output interruption may indicate blown fuses. Contact IDEC.
• The PS5R-V switching power supply contains an internal fuse for AC input. When
using DC input, install an exter nal fuse. To avoid blown fuses, select a fuse in
consideration of the rated current of the internal fuse.
Rated Current of Internal Fuses
Part Number Internal FuseRated Current
PS5R-VB/VC 2A
PS5R-VD/VE/VF 4A
PS5R-VG 6.3A
• Avoid overload and short-circuit for a long period of time, oth erwise the internal
elements may be damaged.
• DC input operation is not subject to safety standards.
Rust and Scratches on Metal parts
Bonded metal parts are used for the PS5R-V. Rust on the edge and scratches on the
surfaces may be developed depending on the storage condition, but the performance of
the PS5R-V is not affected.
Noise
Small acoustic noise inside the PS5R-V may be heard depending on the input voltage
and load, but the performance of the PS5R-V is not affected.
Series Operation
Series operation is allowed. Connect Schottky barrier diodes D as shown below. Select
a Schottky diode in consideration of the rated current. The diode’s reverse voltage must
be higher than the PS5R-V’s output voltage.
L
N
L
N
+V
–V
L
N
+V
–V
Load
(a)
L
N
L
N
+V
–V
L
N
+V
–V
Load
Load
(b)
Parallel Operation
Parallel operation is not possible to increase the output capacity,
because the internal elements and load may be damaged.
Backup Operation
Backup operation is a connection method of two switching power supplies in parallel
for emergency. Normally one switching power supply has a sufficient output. If one
switching power supply fails, another one operates to continue the output. Make sure
that the sum of power
consumption by load and diode is not greater than the rated wattage (rated voltage ×
rated
current) of one switching power supply.
−
IN
AC
OUT
−
IN OUT
Load
D
D
Select a diode in consideration of:
Diode’s current must be more than double the PS5R-V’s output current. Take heat dis-
sipation into consideration.
Warranty
IDEC warranties the PS5R-V switching power supply for a period of five years from the
date of shipment.
Scope
IDEC agrees to repair or replace the PS5R-V switching power supply if the product has
been
operated under the following conditions. The maximum value of output capacity is
within the range shown in “Operating Temperature vs.
Output Current on page 3.
1. Average operating temperature (ambient temperature of switching power supply)
is 40°C maximum.
2. The load is 80% maximum.
3. Input voltage is the rated input voltage.
4. Standard mounting style
IDEC shall not be liable for other damages including consequential, contingent or
incidental
damages. Warranty does not apply if the PS5R-V switching power supply was subject
to:
1. Inappropriate handling, or operation beyond specifications.
2. Modification or repair by other than IDEC.
3. Failure caused by other than the PS5R-V switching power supply.
4. Failure caused by natural disasters.
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS5R Slim Line Series Power Supplies
182 www.IDEC.com 1706131649
PS5R Slim Line Series
Switching Power Supplies
Key features:
• Lightweight and compact in size
• Wide power range: 10W-240W
• Universal input:
10W to 90W: 85-264V AC/100-370V DC
120W and 240W: 85-264V AC/100-350V DC
• Power Factor Correction for 60W to 240W
(EN61000-3-2)
• Meets SEMI F47 Sag Immunity (120W & 240W only)
• UL Listed for Class 1, Div. 2 Hazardous Locations
• Overcurrent protection, auto-reset
• Overvoltage protection, shut down
• Spring-up screw terminal type, IP20
• DIN rail or panel surface mount
• Approvals:
CE Marked ANSI/ISA-12.12.01-2011 (Hazardous locations)
TÜV EN50178:1997
c-UL, UL508 LVD: EN60950:2000
UL1310 (PS5R-SB, -SC, -SD) EMC: Directive EN61204-3:2000 (EMI: Class B, EMS: Industrial)
Designed with Accessibility & Convenience in Mind
DC Low Indicator
(15W, 120W & 240W Slim Line Only)
The indicator turns on when the output
voltage drops below 80% of the rated value.
This assists in troubleshooting power supply
problems.
DC ON Indicator
The indicator turns on when the unit is powered
up. This is a convenient way to know when the
power supply is receiving power.
Output Voltage Adjustment
The output voltage can be easily adjusted within
+ 10% of the rated voltage.
Fingersafe, Spring-up Screw Terminals
Terminals are captive spring-up screws, which makes using them
as easy as pushing a screw down and tightening it.
They are shock and vibration resistant, and work with ring lugs,
fork connectors or stripped wire connections. The terminals are
rated IP20 (when tightened) meaning they are recessed to keep
ngers and objects from touching the input contacts.
Top
View
Universal Input Power
The applied input power has a range of 85-264V
AC (100-350V DC) without the use of jumpers or
slide switches. This makes IDEC power supplies
suitable for use anywhere in the world.
Output Channel
With very low output ripples of less than 1% peak
to peak, the 120W and 240W power supplies are
some of the best in the industry. The output comes
with overload protection that avoids damaging the
power supply and the spring-up, ngersafe, screw
terminals add a level of safety and ease for the
user. The 240W power supply also has the conve-
nience of two output terminals.
Long Life Expectancy
IDEC power supplies are very reliable, with a life
expectancy of 70,000 hrs. (minimum) or longer,
depending on usage. Power factor correction
has also been included to minimize harmonic
distortion, resulting in a longer operating life and
increased reliability.
Ventilation Grill
Provides cooling for
the power supply and
prevents small objects
from falling into the
power supply circuitry.
File #E234997 (SEMI F47 120W &
240W only)
183
800-262-IDEC (4332) • USA & Canada
PS5R Slim Line Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Part Numbers
10
85 to 264V
AC
5V DC 2.0A PS5R-SB05
15
12V DC 1.2A PS5R-SB12
24V DC 0.65A PS5R-SB24
30
12V DC 2.5A PS5R-SC12
24V DC 1.3A PS5R-SC24
60 24V DC 2.5A PS5R-SD24
Style Output
Capacity
Input
Voltage
Output
Voltage
Rated
Current
Part
Number
90
85 to 264V
AC
24V DC 3.75A PS5R-SE24
120 24V DC 5A PS5R-SF24
240 24V DC 10A PS5R-SG24
Accessories
Panel Mounting Bracket for PS5R-SB PS9Z-5R1B
Panel Mounting Bracket for PS5R-SB (at side mounting) PS9Z-5R2B
Panel Mounting Bracket for PS5R-SC and PS5R-SD PS9Z-5R1C
Panel Mounting Bracket for PS5R-SE PS9Z-5R1E
Panel Mounting Bracket for PS5R-SF & PS5R-SG PS9Z-5R1G
DIN rail (1000mm) BNDN1000
DIN rail end clip BNL5
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS5R Slim Line Series Power Supplies
184 www.IDEC.com 1706131649
Specications
Model
5V DC output PS5R-SB05 – – – – –
12V DC output PS5R-SB12 PS5R-SC12 – – – –
24V DC output PS5R-SB24 PS5R-SC24 PS5R-SD24 PS5R-SE24 PS5R-SF24 PS5R-SG24
Output Capacity 15W (5V Model is 10W) 30W 60W 90W 120W 240W
Input
Input Voltage
(single-phase, 2-wire)
85 to 264V AC,
100 to 370V DC
85 to 264V AC,
100 to 350V DC
Input Current
(maximum)
100VAC 0.45A 0.9A 1.7A 2.3A 1.8A 3.5A
200VAC 0.3A 0.6A 1.0A 1.4A 1.0A 1.7A
Internal Fuse Rating 2A 3.15A 4A 6.3A
Inrush Current (cold start) 50A maximum (at 200V AC)
Leakage Current (at no load) 132V AC: 0.38 mA maximum
264V AC: 0.75 mA maximum 0.75mA maximum 1mA maximum
Typical
Efciency
5V DC 69% – – – – –
12V DC 75% 78% – – – –
24V DC 79% 80% 83% 82% 84%
Output
Output Current
Ratings
5V DC 2.0A – – – – –
12V DC 1.2A 2.5A – – – –
24V DC 0.65A 1.3A 2.5A 3.75A 5A 10A
Voltage Adjustment ±10% (V. ADJ control on front)
Output Holding Time 20ms minimum (at rated input and output)
Starting Time 200ms maximum – – – 650ms maximum 500ms maximum
Rise Time 100ms maximum (at rated input and output) 200ms maximum
Line Regulation 0.4% maximum
Load Regulation 1.5% maximum 0.8% max
Temperature Regulation 0.05% degree C maximum
Ripple Voltage 2% peak to peak maximum (including noise) 1% peak to peak maximum (including noise)
Overcurrent Protection 105% or more, auto reset 105 to 130%, auto reset 103 to 110%, auto reset
Overvoltage Protection 120% min. SHUTDOWN
Operation Indicator LED (green)
Voltage Low Indication LED (amber) – – – LED (amber)
Dielectric Strength
Between Input and Ground: 2000 V AC, 1 minute
Between input and output: 3000V AC, 1 minute;
Between output and ground: 500V AC, 1 minute.
Insulation Resistance Between Input & Output Terminals: 100 M Min
Operating Temperature –10 to +65°C (14 to 149°F) -10 to 60°C (14 to 140°F)
Storage Temperature -25 to 75°C (-13 to +167°F)
Operating Humidity 20 to 90% relative humidity (no condensation)
Vibration Resistance Frequency 10 to 55Hz, Amplitude 0.375mm
Shock Resistance 300m/s2 (30G) 3 times each in 6 axes
Approvals EMC: EN61204-3 (EMI: Class B, EMS: Industrial), c-UL (CSA 22.2 No. 14), ANSI/ISA-12.12.01-2011, UL508, LVD: EN60950, EN50178
UL1310 Class 2, c-UL (CSA 22.2 No. 213 and 223) – SEMI F47
Harmonic Directive N/A EN61000-3-2 A14 class A
Weight (approx.) 160g 250g 285g 440g 630g 1000g
Terminal Screw M3.5 slotted-Phillips head screw (screw terminal type)
IP protection IP20 ngersafe
Dimensions H x W x D (mm) 90 x 22.5 x 95 95 x 36 x 108 115 x 46 x 121 115 x 50 x 129 125 x 80 x 149.5
Dimensions H x W x D (inches) 3.54 x 0.89 x 3.74 3.74 x 1.42 x 4.25 4.53 x 1.81 x 4.76 4.53 x 1.97 x 5.08 4.92 x 3.15 x 5.89
1. For dimensions, see page 186.
185
800-262-IDEC (4332) • USA & Canada
PS5R Slim Line Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Temperature Derating Curves
All IDEC Slim Line power supplies are listed to UL508, which allows operation
at 100% capacity inside a panel. This eliminates the need to use oversize power
supplies or utilize two power supplies derated at 50% of their rated output.
The charts below show that the PS5R Slim 10W (at 60ºC) and 15W (at 60ºC),
30W/60W/90W (at 55ºC), 120W (at 40ºC), and 240W (at 45ºC) meet the
elevated, operating temperature required by UL508 and EN60950 standards to
operate at an output current of 100%. The output current starts to derate beyond
the required temperature.
PS5R-SB
–100 10 20 30 40 50 60 6555 70
0
10
20
30
40
50
60
70
80
90
100
Output Current (%)
Operating Temperature (°C)
Mounting A
Mounting B, C, D
Dearting curve for PS5R-SB varies depending on
mounting method (see right).
Mounting A
(standard)
Mounting B
(upright) PS5R-SC
55
-10 010 20 30 40 50 60 70
0
10
20
30
40
50
60
70
80
90
100
Operating Temperature (ºC)
Output Cuurent (%)
PS5R-SG
45
-10 010 20 30 40 50 60 70
0
10
20
30
40
50
60
70
80
90
100
Operating Temperature (ºC)
Output Cuurent (%)
Mounting C
(left side up)
Mounting D
(right side up)
PS5R-SD, -SE, -SF
-10 010 20 30 40 50 60 70
0
10
20
30
40
50
60
70
80
90
100
Operating Temperature (ºC)
Output Cuurent (%)
PS5R-SE 90W/3.75A/24V DC versus a Leading Competitor
Standard derating curve (operating temperature vs. output current)
Leading Competitor
“24V/2.5A”
1.0
2.0
3.0
4.0
Currrent (A)
“Normal” Rating 2.5A
“Boost” Rating 3.75A
Don’t Believe the Hype
Other companies use slick marketing to sell you 60W power
supplies with a “BOOST,” but what they don’t tell you is that
these are merely 90W power supplies that have been renamed
to fool you into thinking they have a unique feature. IDEC 90W
power supplies are just what they claim, 90W power supplies.
The truth is IDEC led the market by incorporating UL508 DIN rail
mount power supplies as a standard product. Don’t let the other
guys pull a fast one on you by claiming to provide features that
just aren’t true, or even possible. See what IDEC has to offer, no
strings attached.
Overload Protection
Overload protection prevents the power supply from being damaged when an overload occurs. There are two kinds of protection.
24
Overcurrent Protection
PS5R-SF, -SG
Overcurrent Protection
When the output current exceeds
105% of the rated current, overload
protection is triggered, and the
output voltage starts decreasing.
When the output current returns
within the rated range, the overload
protection function is automatically
cleared. Overvoltage Protection
Overvoltage Protection
When the output voltage of the
power supply rises to 120% or more
of the rated value, the output will
shut off. To restore power, only
manual reset is available which is an
advantage in troubleshooting.
SEMI-F47 Approved
Voltage Sag Sliding Scale PS5R-SF, -SG
The SEMI F47 (Semiconductor Processing Equipment Voltage Sag Immunity) denes the minimum voltage sag
ride-through requirements for semiconductor processing, automated test equipment and other equipment. It
requires that the equipment be able to tolerate voltage sags on an AC power line without interrupting opera-
tions. This avoids the loss of production and money.
The graph shows how the equipment must tolerate sags to 50% for 200ms, sags to 70% for up to 0.5 seconds
and sags to 80% for up to 1 second.
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS5R Slim Line Series Power Supplies
186 www.IDEC.com 1706131649
Dimensions and Terminal Markings
PS5R-SB
100-240VAC
INPUT
VR.
ADJ
ON
LO
W
OUTPUT
PS5R-SC
PS5R-SD
L
INPUT 50/60Hz
VR.
ADJ
DC ON
N
-V
OUTPUT
+V
PS5R-SE
L
INPUT 50/60Hz
VR.
ADJ
DC ON
N
-V
OUTPUT
+V
Height 90mm
Width 22.5mm
Depth 95mm
Height 95.0mm
Width 36.0mm
Depth 108.0mm
Height 115.0mm
Width 46.0mm
Depth 121.0mm
PS5R-SF
Height 115.0mm
Width 50.0mm
Depth 129.0mm
PS5R-SG
Height 125.0 mm
Width 80.0 mm
Depth 149.5 mm
80
125
149.5
Front Panel (terminals)
Markings Name Description
V. ADJ Voltage adjustment Adjusts within ±10%; turn clockwise to
increase output voltage.
DC ON Operation indicator Green LED is lit when output voltage is on.
DC Low Output indicator Amber LED is lit when output voltage drops
below 80% of rated voltage.
+V, –V DC output terminals +V: Positive output Terminal
–V: Negative output terminal
Frame ground Ground this terminal to reduce high-frequency
noise caused by switching power supply.
L, N Input terminals Accept a wide range of voltages and
frequencies (no polarity at DC input).
187
800-262-IDEC (4332) • USA & Canada
PS5R Slim Line Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Mounting Bracket Dimensions (mm)
PS9Z-5R1B (for PS5R-SB) PS9Z-5R2B (for PS5R-SB) PS9Z-5R1C (for PS5R-SC & PS5R-SD)
2-M4 tapped holes or 2-ø4.5 through holes
12
24.7
120
112
PS9Z-5R1B
2-M4 tapped holes or 2-ø4.5 through holes
102
110
62.9
44
(See the front page for mounting examples.
)
PS9Z-5R2B
115
105
26
38
2-M4 Tapped Holes or
2-ø4.5 Drilled Holes
PS9Z-5R1E (for PS5R-SE) PS9Z-5R1G (for PS5R-SF & PS5R-SG)
36
48
135
125
2-M4 Tapped Holes or
2-ø4.5 Drilled Holes
135
145
48
36
4-M4 Tapped Holes or
4-ø4.5 Drilled Holes
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS5R Standard Series Power Supplies
188 www.IDEC.com 1706131649
PS5R Standard Series
Switching Power Supplies
Key features:
• Wide power range: 7.5W-480W
• Universal input :
7.5W-50W: 85-264V AC/105-370V DC
100W: 85-132V AC/170-264V AC
240-370V DC (selectable)
75W, 120W, 240W: 85-264V AC/110-350V DC
480W: 3 phase: 320- 575V AC
3 phase: 360- 575V AC
• Overcurrent/overvoltage protection
• Power Factor Correction (75W, 120W, 240W models)
EN61000-3-3
EN61000-3-2
• Voltage adjustment +10%
• Spring-up crew terminal, IP20 (nger-safe)
• DIN rail or panel surface mount
• Approvals:
CE marked
UL 508 Listed
c-UL
TÜV approved
LVD EN60950:2000
UL 508 Listed
File #E177168 Cert No.
BL980213332392
Part Numbers
7.5
85 to 264V
AC
5V DC 1.5A PS5R-A05
12V DC 0.6A PS5R-A12
24V DC 0.3A PS5R-A24
15
5V DC 2.5A PS5R-B05
12V DC 1.2A PS5R-B12
24V DC 0.6A PS5R-B24
30
12V DC 2.5A PS5R-C12
24V DC 1.3A PS5R-C24
50 24V DC 2.1A PS5R-D24
Style Output
Capacity
Input
Voltage
Output
Voltage
Rated
Current
Part
Number
75 85 to 264V
AC 24V DC 3.1A PS5R-Q24
100
100 to 240V
AC
24V DC 4.2A PS5R-E24
120 24V DC 5A PS5R-F24
240 24V DC 10A PS5R-G24
480
320 to
575V AC (3
phase)
360 to
575V AC (2
phase)
24V DC 20A PS5R-TJ24*
EMC Directives:
EN50081-2
EN50082-2
EN61000-6-2
189
800-262-IDEC (4332) • USA & Canada
PS5R Standard Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Specications
Model
PS5R-A05 PS5R-B05* — — — —
PS5R-A12 PS5R-B12 PS5R-C12 — — —
PS5R-A24 PS5R-B24 PS5R-C24 PS5R-D24 PS5R-Q24 PS5R-E24 PS5R-F24 PS5R-G24 PS5R-TJ24
Output Capacity 7.5W 15W 30W 50W 75W 100W 120W 240W 480W
Input
Input Voltage (single-
phase, 2-wire)
100 to 240V AC nominal (85 to 264V AC), 50/60Hz (47 to 63Hz)
110 to 340V DC nominal (105 to 370V DC)
100 to 120V AC,
50/60Hz
200 to 240V AC,
50/60Hz
(jumper selectable)
240 to 370V DC
100 to 240V AC, 50/60Hz,
110 to 340V DC
3 phase:
320 to 575V AC
2 phase:
360 to 575V AC
Input Current (typical) 0.17A at
100V AC
0.3A at
100V AC
0.68A at 100V
AC
1.15A at
100V AC
1.1A at
100V AC
2.5A at 100V AC
1.5A at 200V AC
1.8A at
100V AC 4A at 100V AC 3 x 1.1A
3 x 0.8A
Internal Fuse Rating 2A 2A 3.15A 3.15A 3.15A 4A 4A 6.3A
Inrush Current 50A maximum (at cold start at 200V AC)
70A maximum
(at cold start at
230V AC)
50A maximum (at
cold start at 200V
AC)
70A maximum (at cold start at
230V AC) 21A na
Leakage Current (at no
load) 0.75mA maximum (60Hz, measured in conformance with UL, CSA, VDE) <3.5ml
Typical Efciency
69% at 5V
75% at 12V
79% at 24V
75% at 12V
75% at 24V 79% at 24V 83% at 24V 85% at 24V 83% at 24V 91%
Overvoltage Protection Outputs turns off at 105% (typical)
Output
Voltage and Current
Ratings
5V, 1.5A
12V, 0.6A
24V, 0.3A
5V, 2.5A
12V, 1.2A
24V, 0.6A
12V, 2.5A
24V, 1.3A 24V, 2.1A 24V, 3.1A 24V, 4.2A 24V, 5A 24V, 10A 24V, 20A
Voltage Adjustments ±10% (V.ADJ screw on top)
Output Holding Time 20ms minimum (at full rated input and output) 10ms typical
Rise Time 200ms maximum (at full rated input and output) 150ms max. ?
Line Regulation 0.4% maximum 1.0% max
Load Regulation 1.5% maximum 2.0% max
Fluctuation due to Ambi-
ent Temperature Change 0.05% maximum
Ripple Voltage 2% peak to peak maximum (including noise) < 10mVpp
Overload Protection 120% typical (Zener-limiting) 120% typical, auto reset 125% typical,
auto reset
Operation Indicator LED (green)
Parallel Operation
Allowed
PS5R-A PS5R-B PS5R-C PS5R-D PS5R-Q PS5R-E PS5R-F PS5R-G
No Yes No Yes Yes
Dielectric Strength
Between input and output terminals: 3,000V AC, 1 minute
Between input terminals and housing: 2,000V AC, 1 minute
Between output terminal and housing: 500V AC, 1 minute
Insulation Resistance Between input and output terminals/input terminals and housing: 100M minimum (500V DC megger) 2kV AC, 500V
DG
Operating Temperature –10˚ to +60˚C (14˚ to 140˚F) (see derating curves) -25 to +70 C
Storage Temperature –30˚ to +85˚C (-22˚ to 185˚F) -40 to +85 C
Operating Humidity 20 to 90% relative humidity (no condensation)
95% max (at 25
C, no
condensation)
Vibration Resistance 45m/s2, 10 to 55Hz, 2 hours on each of 3 axes 10 to 50Hz, 0.75mm p-p, 2 hrs on each of 3 axes
<15Hz amplitude
+/- 2.5mm in
accordance with
IEC 60068-2-6 15
to 150Hz, 2.3g,
90 min.
Shock Resistance 300m/s2 (30G), 3 shocks in each of 6 directions
30g in all
directions in ac-
cordance with IEC
60068-2-27
Approvals Conforms to EMC Directives EN50081-2 & EN50082-2. LVD Directive EN60529 — Certied to EN60950.
UL508 listed. c-UL, TUV approved. CE marked. EN61000-3-2
Weight 150g 170g 360g 390g 800g 600g 1200g 2000g 2000g
Termination Spring-up, ngersafe terminals with captive M3.5 screws
IP protection IP20 (nger safe)
Dimensions H x W x D (mm) 75 x 45 x 70 75 x 45 x95 75 x 90 x 95 75 x 90 x 95 120 x 85 x 140 75 x 145 x 95 120 x 115 x140 120 x 200x 140 130 x 115 x 152.5
Dimensions H x W x D (inches) 2.95 x 1.77 x 2.76 2.95 x 1.77 x 3.74 2.95 x 3.54 x
3.74
2.95 x 3.54
x 3.74
4.72 x 3.35 x
5.52 2.95 x 5.71 x 3.74 4.72 x 4.53 x
5.52
4.72 x 7.87 x
5.51 5.12 x 4.53 x 6.00
1. For dimensions, see page 192.
2. For usage instructions, see page 191.
3. *12.5W for 5VDC model.
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS5R Standard Series Power Supplies
190 www.IDEC.com 1706131649
Temperature Derating Curves
PS5R-A/B PS5R-C/D
0
10
20
30
40
50
60
70
80
90
100
0102030405060–10
Output Current (%)
Operating Temperature (C)
Mounting style B
Mounting style A
0
10
20
30
40
50
60
70
80
90
100
0102030405060–10 35
Output Current (%)
Operating Temperature (C)
Mounting style B
Mounting style A
PS5R-E PS5R-Q
0
10
20
30
40
50
60
70
80
90
100
0102030405060-10
Mounting style B
Mounting style A
Output Current (%)
Operating Temperature (°C)
0
10
20
30
40
50
60
70
80
90
100
0102030405060
Operating Temperature (C)
Output Current (%)
Mounting style B
Mouting style A
PS5R-F/G PS5R-TJ
0
10
20
30
40
50
60
70
80
90
100
0102030405060
Operating Temperature (C)
Mounting Style B
35
Mounting Style A
Output Current (%)
0
10
20
30
40
50
60
70
80
90
100
010203040506
070
Ambient Temperature (C)
Output Current (A)
Iw
B Mounting (Facing Upward)
Vertical
A Mounting (standard)
Vertical
191
800-262-IDEC (4332) • USA & Canada
PS5R Standard Series
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Accessories
Part Numbers: PS5R Accessories
Appearance Description Part Number
DIN rail (1000mm) BNDN1000
DIN rail end clip BNL5
Installation Instructions
Time-Saving Spring-up Terminals
The innovative terminals on the PS5R series use a spring-loaded screw. This
makes installation as easy as pushing down and turning with a screwdriver. Instal-
lation time is cut in half since the screws do not need to be backed out to install
wiring. The screws are held captive once installed and are 100% nger-safe.
Screw terminals accept bare wire or ring or fork connectors.
1. Insert the wire connector into the slot on the side of the power supply.
2. Using a at head or Phillips screwdriver, push down and turn
the screw.
The wire is now connected, and the screw terminal is ngersafe!
Front Panel (terminals)
V. ADJ Voltage
adjustment
Adjusts within ±10%; turn clockwise
to increase output voltage
DC ON Operation
indicator
Green LED is lit when output voltage
is on
+V, –V DC output
terminals
+V: Positive output Terminal
–V: Negative output terminal
Frame
ground
Ground this terminal to reduce
high-frequency currents caused by
switching
L, N Input
terminals
Accept a wide range of voltages and
frequencies (no polarity at DC input)
NC No connection Do not insert wires here, as this may
damage the power supply
Overcurrent Protection Characteristics
PS5R-A/B
100
50
0100 105
Output Voltage (%)
Output Current (%)
PS5R-C/D/E
100
50
0100 105
Output Voltage (%)
Output Current (%)
Parallel Operation
+
-
PS5R
PS5R
PS5R
PS5R
PS5R
TERMINALS
ELECTRICAL LOAD
1. Parallel operation only recommended for PS5R-Q24, PS5R-F24 and PS5R-G24.
2. Factory recommended diode ST Microelectronics BYV54V-50, BYV54V-100,
BYV54V-200, BYV541V-200 or with equivalent electrical specications.
3. Using the voltage adjustment make sure out-voltage is the same for all power
supplies.
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS5R Standard Series Power Supplies
192 www.IDEC.com 1706131649
Dimensions
131313
85
120
101
60
5
12
135
145
75
4-ø4.5
200-240V 200
102
4.6
13 26 13
1313
V.ADJ
DC ON
M3.5 Terminal
Screws
10-ø6.5
4-ø4.5
80 13131313
90
12
7.35
75
605
V.ADJ
DC ON
M3.5 Terminal Screws
60
62.5
35
38.5
7.35 75
6-ø6.5
R2.25
12
16 13131313
115
120
101
M3.5 Terminal
Screws
M3.5 Terminal Screws
M3.5 Terminal
Screws
V.ADJ
DC ON
M3.5 Terminal
Screws
10-ø6.5
4-ø4.5
12
80 13131313
90
7.35
75
605
V.ADJ
DC ON
M3.5 Terminal
Screws
60
62.5
35
38.5
7.35 75
6-ø6.5
R2.25
12
4-ø4.5
110
75
4-ø4.5
105
110
120
4-ø4.5
110
190
M3.5 Terminal
Screws
14-ø6.5
130
115
PS5R-A (7.5W) PS5R-B (15W) PS5R-C (30W)
PS5R-D (50W) PS5R-Q (75W) PS5R-F (120W)
PS5R-E (100W) PS5R-G (240W)
Terminal Markings
NC
-V +V
V.ADJ
DC ON
NL
INPUT
NC
–V +V
V.ADJ
DC ON
NL
NC NC
INPUT
200-240V
–V +V
NL
200-240V 100-120V
VOLTAGE SELECTINPUT
V.ADJ
DC ON 100w-OUTPUT
PS5R-A/B PS5R-C/D/Q/F/G PS5R-E
PS5R-TJ24
193
800-262-IDEC (4332) • USA & Canada
PS3X
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
PS3X Series
Key features:
• Compact size
• Universal AC input voltage
• 5V, 12V and 24V DC outputs
• Available with mounting brackets for direct or DIN rail mounting
• Overcurrent/overvoltage protection
• EMC, EN55022 Class B compliant
• UL/c-UL recognized, TUV
Part Numbers
Power Supply
Style Output
Capacity Part Number Input
Voltage
Output
Voltage
Output
Current
15W
PS3X-B05AFC
PS3X-B12AFC
PS3X-B24AFC
100 to
240V AC
5V
12V
24V
3.0A
1.3A
0.63A
25W
PS3X-C05AFC
PS3X-C12AFC
PS3X-C24AFC
5V
12V
24V
5.0A
2.1A
1.1A
50W PS3X-D12AFG
PS3X-D24AFG
12V
24V
4.2A
2.2A
75W
PS3X-Q05AFG
PS3X-Q12AFG
PS3X-Q24AFG
5V
12V
24V
12.0A
6.0A
3.2A
100W
PS3X-E05AFG
PS3X-E12AFG
PS3X-E24AFG
5V
12V
24V
16.0A
8.5A
4.5A
Output Voltage
05: 5V DC (15W, 25W, 75W, 100W)
12: 12V DC
24: 24V DC
PS3X - B 05 AF C
Output Capacity
B: 15W
C: 25W
D: 50W
Q: 75W
E: 100W
Cover and Terminal Style
C: w/Standard cover,
Horizontal terminal block
(PS3X-B/C models)
G: w/Standard cover,
Vertical terminal block
(PS3X-D/Q/E models)
Input Voltage
AF: 100 to 240V AC
Part Number Conguration
L-shaped Mounting Bracket (optional)
Applicable Power Supply Part Number
PS3X-B PS9Z-3N3A
PS3X-C PS9Z-3N3B
PS3X-D PS9Z-3E3B
PS3X-Q PS9Z-3N3E
PS3X-E
DIN-rail Mounting Bracket (optional)
Applicable Power Supply Part Number
PS3X-B PS9Z-3N4B
PS3X-C
PS3X-D PS9Z-3E4C
PS3X-Q PS9Z-3E4D
PS3X-E
DIN Rail
Appearance Part Number Length Material Weight (g)
BNDN1000 1000mm Aluminum 200
End Clips
Appearance Part Number Description
BNL5 small DIN rail end clip
BNL6 medium DIN rail end clip (the BNL6 has a
higher prole than BNL5)
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS3X Power Supplies
194 www.IDEC.com 1706131649
Specications
Model [15W]
PS3X-B05/B12/B24
[25W]
PS3X-C05/C12/C24
[50W]
PS3X-D12/D24
[75W]
PS3X-Q05/Q12/Q24
[100W]
PS3X-E05/E12/E24
Input
Rated Input Voltage 100 to 240V AC
Voltage Range (Note 1) 85 to 264V AC/
120 to 375V DC 88 to 264V AC / 125 to 375V DC
Frequency 47 to 63 Hz
Input Current 0.5A max. 0.65A max. 1.3A max. 1.8A max. 2.5A max.
Inrush Current
(Ta = –25°C,
ACV cold start)
at 115V AC 40A max. 30A max. 30A max. 30A max. 35A max.
at 230V AC 60A max. 50A max. 50A max. 50A max. 70A max.
Leakage Current 0.5mA max. 1.5mA max. 1.5mA max. 1.5mA max. 1.5mA max.
Efciency (Typ.)
(230V AC at input/
rated output)
5V 77% 77% — 77% 77%
12V 81% 81% 81% 82% 81%
24V 82% 84% 84% 84% 84%
Output
Rated Voltage/Current
5V, 3A 5V, 5A — 5V, 12A 5V, 16A
12V, 1.3A 12V, 2.1A 12V, 4.2A 12V, 6A 12V, 8.5A
24V, 0.63A 24V, 1.1A 24V, 2.2A 24V, 3.2A 24V, 4.5A
Adjustable Voltage Range ±10%
Output Holding Time
13 ms typ. (100V AC)
60 ms minimum
(230V AC)
10 ms typ. (100V AC)
60 ms minimum
(230V AC)
23 ms typ. (100V AC)
60 ms minimum
(230V AC)
14 ms typ. (100V AC)
60 ms minimum
(230V AC)
17 ms typ. (100V AC)
80 ms minimum
(230V AC)
Start Time 1000 ms max. (230V AC input, rated output)
Rise Time
50 ms max.
(230V AC input, rated
output)
30 ms max.
(230V AC input, rated
output)
30 ms max.
(230V AC input, rated
output)
30 ms max.
(230V AC input, rated
output)
30 ms max.
(230V AC input, rated
output)
Regulation
Input Fluctuation 0.5% max.
Overvoltage Fluctuation 5V: ±2% max. 12V, 24V: ±1% max.
Temperature Fluctuation 0.04% / °C max. (–20 to +50°C) 0.04% / °C max. (–10 to +45°C)
Ripple (including noise)
–20 to –10°C 5V: 200mV max.
12V/24V: 200mV max.
5V: 140mV max.
12V: 240mV max.
24V: 300mV max.
– – –
–10 to 0°C 5V: 160mV max.
12V/24V: 200mV max.
5V: 140mV max.
12V: 240mV max.
24V: 300mV max.
12V: 240mV max.
24V: 300mV max.
5V: 140mV max.
12V: 240mV max.
24V: 300mV max.
5V: 160mV max.
12V: 240mV max.
24V: 300mV max.
PS3X-B, C: 0 to +50°C
PS3X-D, Q, E: 0 to +45°C
5V: 100mV max.
12V/24V: 150mV max.
5V: 70mV max.
12V: 120mV max.
24V: 150mV max.
12V: 120mV max.
24V: 150mV max.
5V: 70mV max.
12V: 120mV max.
24V: 150mV max.
5V: 100mV max.
12V: 120mV max.
24V: 150mV max.
Supplementary
Functions
Overcurrent Protection 105% min. (auto reset) 2
Overvoltage Protection Voltage limitation at 115% min. Intermittent operation or output off at 115% min. 3
Operation Indicator green LED
Dielectric
Strength
Between input and output terminals 3000V AC, 1 minute
Between input and ground terminals 2000V AC, 1 minute
Between output and ground terminals 500V DC, 1 minute
Insulation Resistance 100M minimum, 500V DC megger
(between input and output terminals, between input and ground terminals)
Operating Temperature –20 to +70°C (no freezing, see output derating) –10 to +70°C (no freezing, see output derating)
Operating Humidity 20 to 85% RH (no condensation)
Storage Temperature –40 to +85°C (no freezing)
Storage Humidity 10 to 95% RH (no condensation)
Vibration Resistance 10 to 55 Hz, 20m/s2 constant, 2 hours each in 3 axes
Shock Resistance 200m/s2, 1 shock each in 3 axes
EMC EMI EN55022 Class B
EMS EN55024
Safety Standards IEC/EN60950-1, UL60950-1, CSA C22.2 No. 60950-1
Dimensions (H × W × D) (mm) 50.8H × 28W × 62D 50.8H × 28.5W × 79D 82H × 35W × 99D 95H × 38W × 129D 95H × 38W × 159D
Weight (approx.) 130g 180g 340g 500g 700g
Terminal Screw M3 M3.5
1. See “Output Current vs. Input Voltage” characteristics next page. Not subject to safety standards. When using DC input, connect a fuse to the input terminal for DC input protection.
2. Overload for 30 seconds or longer may damage the internal elements.
3. One minute after the output has been turned off, turn on the AC input again.
195
800-262-IDEC (4332) • USA & Canada
PS3X
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
Characteristics
Operating Temperature vs. Output Current (Derating Curves)
Conditions: Natural air cooling (operating temperature is the temperature around the power supply)
Overcurrent Protection Characteristics
PS3X-B/C PS3X-D/Q/E PS3X
-10 010203040506070
0
10
20
30
40
37.5
50
60
70
80
90
100
-10 010203040506070
0
10
20
30
40
50
60
70
80
90
100
-30
-20 -10 010203040506070
0
10
20
30
40
50
60
70
80
90
100
Output Current (%)
Operating Temperature (°C) Operating Temperature (°C)
Operating Temperature (°C)
Output Current (%)
Output Current (%)
0 100 105
0
100
Output Voltage (%)
Intermittent Operation
Output Current (%)
Output Current vs. Input Voltage (TA = 25°C)
PS3X-B/C PS3X-D/Q/E
PS3X-B: 85
PS3X-C: 88
100
100
264
264
0
10
20
30
40
50
60
70
80
90
100
88 100 264
0
10
20
30
40
50
60
70
80
90
100
88
176
132
264
0
10
20
30
40
50
60
70
80
90
100
Output Current (%)
Input Voltage (VAC) Input Voltage (VAC)
Input Voltage (VAC)
Output Current (%)
Output Current (%)
Operating Temperature by Safety Standards
Power Supplies UL/EN60950-1
Mounting A, B
PS3X-B05, -B12, -B24
PS3X-C05, -C12, -C24 50°C
PS3X-D12, -D24
PS3X-Q05, -Q12, -Q24
PS3X-E05, -E12, -E24 45°C
Up
Mounting A
(standard)
Mounting B
Note: Observe the derating curves when operating PS3X power supplies.
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS3X Power Supplies
196 www.IDEC.com 1706131649
Dimensions
PS3X-B PS3X-C PS3X-D
39.1
11.4
62.0
15.1
28
39.1
8.25
25.25
50.8
5-M3
(Terminal Screw)
76.0
Output Voltage
Adjustment
LED
Terminal Cover
7.62
(Terminal Centers)
2-M3 (Depth 2.5
to 4.0 mm max.)
2-M3 (Depth 2.5
to 4.0 mm max.)
79.0
65.0
14.5
28.5
11.0
55.0
25.4
50.8
13.0
91.9
5-M3
(Terminal Screw)
Terminal Cover
7.62
(Terminal Centers)
Output Voltage
Adjustment
LED
2-M3 (Depth 2.5
to 4.0 mm max.)
2-M3 (Depth 2.5
to 4.0 mm max.)
74.018.0
17.5
35.0
99.0
55.020.5
82.0
45.5
99.7
LED
2-M3
(Depth 2.5 to
4.0 mm max.)
5-M3
(Terminal Screw)
Output Voltage
Adjustment
Terminal
Cover
9.5
(Terminal Centers)
2-M3 (Depth 2.5
to 4.0 mm max.)
PS3X-Q PS3X-E
129.0
18.0
77.0
10.5
38.0
19.5
32.0
78.0
33.034.0
95.0
129.3
)
2-M3 (Depth 2.5
to 4.0 mm max.)
3-M3
(Depth 2.5 to
4.0 mm max.)
5-M3
(Terminal Screw)
LED
Output Voltage
Adjustment
Terminal
Cover
9.5
(Terminal Centers)
78.024.0
32.0
95.0
162.6
159.0
38.0
18.0
118.0
22.0
19.0
10.0
3-M3
(Depth 2.5 to
4.0 mm max.)
7-M3.5
(Terminal Screw)
LED
Output Voltage
Adjustment
Terminal
Cover
9.5
(Terminal Centers)
2-M3 (Depth 2.5
to 4.0 mm max.)
Terminal Markings
PS3X-B/C PS3X-D/Q PS3X-E
LED
V.ADJ
L
N
−V
+V
LED
V.ADJ
L
N
–V
+V
LED
V.ADJ
L
N
−V
+V
Marking Name Description
L, N AC Input Terminal
Accepts a wide range of voltage and
frequency. Polarity does not matter when
using DC input.
Ground Terminal Be sure to connect this terminal to a
proper ground.
+V, –V DC Output Terminals Positive and negative output terminals
V.ADJ Output Voltage
Adjustment
Allows adjustment within ±10%. Turning
clockwise increases the output voltage.
LED Power status Illuminates (green) when input power is
applied.
197
800-262-IDEC (4332) • USA & Canada
PS3X
Power Supplies
OI Touchscreens PLCs Automation Software Power Supplies Sensors Communication Barriers
1706131649
L-shaped Mounting Bracket
PS9Z-3N3A (for 15W) PS9Z-3N3B (for 25W)
20.0
20.03.5
10.0 6.5
27.0
2.0
2-ø3.5 hole
s
27.0
72.0
14
16.539.1
4126
4-ø3.5 holes
6.517.5
28.0
22.04.0
2.3
13.5
65.0
83.5 ±0.5
14.0
30.0
4-ø3.5 holes
4-ø3.5 holes
PS9Z-3E3B (for 50W) PS9Z-3N3E (for 75W/100W)
74.0 ±0.3
80.0 ±0.3 18.0
103.0
13.5
31.0
15.5
2.3
17.5
28.0
4.5 22.5
6.5
ø3.5 holes
3.5 × 4.5
oblong hole
3-ø3.5 holes
3-ø4.5 holes
4-ø4.5 holes
4-ø3.5 holes
2.0
7.5
20.0
±0.2
10.0
28.0
15.0
7.0
10.0
10.0
34.5
12.5
100.0 ±0.3
157.5
42.5
25.0
118.0
77.0
18.0
2-C2.0
DIN-rail Mounting Bracket
H3
H135H2
L1
L2
L3
Part Number Applicable Power Supply L1 L2 L3 H1 H2 H3
PS9Z-3N4B PS3X-B 95 105.5 35 5.2 20.5 50.8
PS3X-C 95 113 35 5.2 20.5 50.8
PS9Z-3E4C PS3X-D 136 117* 35 5.2 20.5 82
PS9Z-3E4D PS3X-Q 188 141* 39.5 5.2 19.7 95
PS3X-E 188 173* 39.5 5.2 19.7 95
* Note that L2 is shorter than L1.
OI TouchscreensPLCsAutomation SoftwarePower SuppliesSensorsCommunicationBarriers
PS3X Power Supplies
198 www.IDEC.com 1706131649
Instructions
Installation Notes
1. When mounting the PS3X
switching power supply, see
the gure on the right.
2. See dimension drawings for mounting
hole layouts.
3. Use M3 screws for mounting.
Choose screws that protrude 2.5 to
4mm from the surface of the
switching power supply.
4. Do not cover the openings of the
switching power supply. Ensure proper
heat dissipation by convection.
5. Maintain a minimum of 20mm clearance around the power supply.
6. When derating of the output does not work, provide forced air-cooling.
7. Make sure to wire the ground terminal correctly.
8. For wiring, use wires with heat resistance of 60°C or higher.
Use copper wire.
9. Recommended tightening torque of terminal screws: 0.8 N·m
Adjustment of Output Voltage
The output voltage can be adjusted within ±10% of the rated output voltage
by using the V.ADJ control. Turning the V.ADJ clockwise increases the output
voltage. Turning counterclockwise decreases the output voltage. Note that
overvoltage protection may work when increasing the output voltage.
Overcurrent Protection
The output voltage drops automatically when an overcurrent ows, resulting in
intermittent operation. Normal voltage is automatically restored when the load
returns to normal conditions. However, overcurrent for a prolonged period of
time or short-circuit causes the internal elements to deteriorate or break down.
Overvoltage Protection
PS3X-B/C: Voltage limit and auto-recovery method. The switching power sup-
plies operate normally when voltage returns to normal.
PS3X-D/Q/E: The output is turned off when an overvoltage is applied. When the
output voltage has dropped due to an overvoltage, turn the input off, and after
one minute, turn the input on again.
Series Operation
When connecting two switching power supplies in a series, insert a Schottky
diode to each output.
Parallel Operation
Parallel operation is not possible.
Insulation/Dielectric Test
When performing an insulation/dielectric test, short the input (between AC) and
output (between + and –). Do not apply or interrupt the voltage suddenly, other-
wise surge voltage may be generated and the power supply may be damaged.
Up
Mounting A
(standard)
Mounting B
Chassis
2.5 to 4 mm
Mounting
Panel
Mounting
Screw
Safety Precautions
• Do not use switching power supplies with equipment where failure or inad-
vertent operation may harm anyone, such as medical, aerospace, railway,
nuclear, etc. PS3X switching power supplies are designed for use in general
electric equipment such as ofce, communication, measuring, and industrial
electric devices.
• Do not disassemble, repair, or modify the power supplies, otherwise electric
shock, re, or failure may occur.
• Do not install the switching power supply in places where someone will
touch it when input voltage is applied. Do not touch the switching power
supply while input voltage is applied and right after the power is turned off,
because high temperature and high voltage may cause burns and electric
shocks.
• Do not short circuit the output terminals or output lead wires, otherwise re
or damage may occur.
• Provide the nal product with protection against failure or damage that may
be caused by malfunction of the switching power supply. Damaged switching
power supply may cause overvoltage on the output terminals, or may cause
voltage drop.
• Turn off power before wiring. Also, make sure to wire correctly. Improper
wiring may cause electric re or damage.
• Do not use switching power supplies to charge rechargeable batteries.
• Make sure that the input voltage does not exceed the rating. Note polarity
of input and output terminals and wire correctly. Incorrect wiring may cause
blown fuses (AC input power), smoke or re.
• Do not touch the inside of the switching power supply, and make sure that
foreign objects do not enter the switching power supply, otherwise an ac-
cident or failure may occur.
• Observe the temperature derating curves. Operating temperature refers to
the temperature around the lower part of the switching power supply. Failure
to observe the derating curves could result in an internal temperature rise
and possible failure of the switching power supply.
• The fuse inside the switching power supply is for AC input. When using with
DC input, install an external fuse.
• Do not set the V. ADJ control over the setting range, otherwise performance
deterioration or failure may occur.
• When failure or error occurs, shut down the input to the switching power
supply, and contact IDEC.
• Do not use or store the switching power supply in a place subject to extreme
vibration or shocks, otherwise failure will result.
• Do not use the switching power supply where it is subject to or near:
• Direct sunlight, heat or high temperatures
• Metal powder, oil, chemicals or hydrogen sulde
• Highly humid areas, such as a basement or conservatory
• Inside freezers or refrigerators, near cooler exhaust, or other cold
environments