Delivery Program Product Category: Load Cells Model: 41 Precision Low Profile Order Code(s): AL111 USE THE CHART BELOW TO DETERMINE LEAD TIMES1 The range or option code with the longest lead time dictates the shipping time. Categories shaded in grey are required selections. For example (reference only): If you build this: AL111 + 50 lb load range (BN), 60 F to 160 F (1a), Unamplified, mV/V output (2u), and horizontal electrical exit port (15a) AL111 + 50 lb load range (BN), 30 F to 130 F (1b), fourwire output (2b), and horizontal electrical exit port (15a) AL111 + 5 lb (AT), 30 F to 130 F (1b), four-wire output (2b), and vertical electrical exit port (15b) The order configuration is this: The delivery class is: AL111 - BN - 1a - 2u - 15a Quick ship, ships in 1 to 5 days AL111 - BN - 1b - 2b - 15a AL111 - AT - 1b - 2b - 15b Fast-track manufacture, ships within 4 weeks Build-to-order, call Honeywell for lead time Page 1 of 2 39B Quick-ship Fast track manufacture Build-to-order (Ships in 1-5 days) (Ships within 4 weeks) (Call Honeywell 1-800-848-6564 or +1 614-850-5000) Load ranges 50 (BN),100 (BR), 500 (CR), 1000 (CV), 2000 (DL), 5000 (DR), 10000 (DV), 20000 (EL), 50000 lb (EP) 7500 lb (DT) 5 (AT), 10 (AV), 25 (BL),250 (CN), 3000 (DN), 4000 (DP), 15000 (EJ), 30000 (EN), 75000 (ER), 100000 (ET), 150000 (FJ), 200000 (FL), 300000 (FN), 400000 (FP), 500000 lb (FR) Temperature compensation 1a. 60 F to 160 F * 1b. 30 F to 130 F 1c. 0 F to 185 F 1d. -20 F to 130 F 1e. -20 F to 200 F 1f. 70 F to 250 F Internal amplifiers 2u. Unamplified, mV/V output * 2b. 4 wire, 5 Vdc 2c. 0-5 Vdc output 2j. 4-20 mA (three-wire) output 2t. 0 Vdc to 10 Vdc Electrical connector orientation 15a. Horizontal electrical exit port orientation * 1i. -65 F to 250 F 1j. 0 C to 50 C 1k. -20 C to 85 C 1m. -25 C to 110 C 3a. Input/output isolation 4a. Overload stops Overload stops Electrical termination 2k. 4 mA to 20 mA (two-wire) 2n (2N) 4 mA to 20 mA (wire) intrinsically safe 15b. Vertical electrical exit port orientation 15c. Radial electrical exit port orientation 15d. Connector on end of cable 3d. Remote buffered shunt calibration Internal amplifier enhancements 1g. 70 F to 325 F 1h. 70 F to 400 F 6a. Bendix PTIH-10-6P 6-pin (ranges to 5000 lb) * 6b. MS3102E-14S-6P (ranges 7500 lb and up) * 6e. Integral cable: Teflon 6i. Integral underwater cable (for ranges 7500 and above) 6f. Integral cable: PVC 6g. Integral cable: Neoprene 6h. Integral cable: Silicone 6i. Integral underwater cable (for ranges 5k and below) 6j. 1/2-14 conduit fitting with 5 ft of 4 conductor PVC cable 6q. Molded integral cable polyurethane 6v. Phoenix connector on end of cable Delivery Program Product Category: Load Cells Model: 41 Precision Low Profile Order Code(s): AL111 Page 2 of 2 39B Quick-ship Fast track manufacture Build-to-order (Ships in 1-5 days) (Ships within 4 weeks) (Call Honeywell 1-800-848-6564 or +1 614-850-5000) Shunt calibration 8a. Precision internal resistor Special calibration 9a. 10 point (5 up/5 down) 20 % increments @ 68 F 9b. 20 point (10 up/10 down) 10 % increments@ 68 F 9c. ASTM E-74 calibration 12b. 5000 ohm (foil) Bridge resistance Zero and span adjustment 14a. No access to pots 14b. Top access to pots Special calibration 30a. Compression only calibration, positive in compression (5k and below) 30b. Tension and compression calibration, positive in tension 30c. Compression only calibration, negative in compression 30d. Tension and compression calibration, positive in compression Bridge type 31a. Dual bridge Shock and vibration 44a. Shock and vibration resistance Interfaces 53e. Signature calibration (inline module available) 53t. TEDS IEEE 1451.4 module 1 LEAD/SHIPPING TIMES ARE APPROXIMATIONS AND MAY VARY DEPENDING ON PRODUCT AVAILABILITY AND OTHER FACTORS. IN NO EVENT SHALL HONEYWELL BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, OR PUNITIVE DAMAGES, EVEN WHERE HONEYWELL HAS BEEN ADVISED OF, OR IS OTHERWISE AWARE OF, THE POSSIBILITY OF SUCH DAMAGES, FOR FAILURE TO MEET SUCH LEAD / SHIPPING TIMES. * Default options. Note: Before selecting option/s, please refer to the Test and Measurement catalog or product data sheet for special application notes and compatibility. A catalog can be ordered on-line at https://home.honeywell-online.com/newTMcatalog. Product data sheets are available on Honeywell's web site at http://content.honeywell.com/sensing/sensotec/catpages.asp.