Sign In SHOP BLOG LEARN FORUMS 0 Items VIDEOS RASPBERRY PI / PI HATS & BONNETS & ADD-ONS / HATS / RASPBERRY PI SENSE HAT Raspberry Pi Sense HAT - For the Pi 3 / 2 / B+ / A+ PRODUCT ID: 2738 1 IN STOCK ADD TO CART 1 ADD TO WISHLIST DESCRIPTION TECHNICAL DETAILS DESCRIPTION Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an `Astro Pi'. The Sense HAT has several integrated circuit based sensors can be used for many different types of experiments, applications, and even games. And it's being used in conjunction with the Raspberry Pi Foundation to perform science experiments aboard the International Space Station (ISS)! The sensors enable you to read: Orientation (yaw, pitch & roll) via an accelerometer, 3D gyroscope, and magnetometer Pressure Humidity Temperature The Sense HAT supports a whole host of projects for the Raspberry Pi, it can measure how fast is the Pi itself travelling (i.e. measure your speed), how hot is it? how humid is it? (air humidity), which direction is the Raspberry Pi facing? And more. The 8x8 LED Matrix enables you to display the data from the various sensors, it can show you which way is geomagnetic North by programming a compass using the magnetometer, or simply be used to play games like Tetris, Pong and Snake with the joystick. The joystick can also be used to enable a human user to interact with the programs running on the Raspberry Pi Sense HAT. Writing programs for the Sense HAT is very simple with a Python library available to get started quickly and easily. For a truly out of world projects check out the AstroPi website, containing a host of ideas and instructions. To Install: Connect your Sense HAT to the Raspberry Pi via the 40 GPIO Pins Open up a terminal and run the following command: wget O http://www.raspberrypi.org/files/astropi/astropiinstall.sh no checkcertificate | bash (This will take approximately 5 minutes to run on the Raspberry Pi 2 Model B, and approximately 20 minutes on earlier models of the Raspberry Pi) When the install is finished you will need to reboot your Raspberry Pi Note: The Raspberry Pi Sense HAT is compatible with the Raspberry Pi 3, Raspberry Pi 2, Model B+, and Model A+, but NOT the earlier 26-pin models of Raspberry Pi 1 Model B & A's. Pi not included! TECHNICAL DETAILS Gyroscope Angular rate sensor (dps): ~245/500/2000 Accelerometer Linear acceleration sensor (g): ~2/4/8/16 Magnetometer Magnetic sensor (gauss): ~4/8/12/16 Barometer: 260 - 1260 hPa absolute range (accuracy depends on the temperature and pressure, ~0.1 hPa under normal conditions) Temperature sensor: Accurate to ~2C in the 0-65C range Relative humidity sensor: Accurate to ~4.5% in the 20-80%rH range, accurate to ~0.5C in 15-40C range 8x8 LED matrix display Small 5 button joystick Standoffs may come in plastic or metal varieties Product Dimensions: 65.1mm x 56.6mm x 13.9mm / 2.6" x 2.2" x 0.5" Product Weight: 20.4g / 0.7oz MAY WE ALSO SUGGEST... Adafruit 9-DOF Absolute Orientation IMU Fusion Pimoroni Unicorn Hat - 8x8 RGB LED Shield for Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Sensor pack 900 Flexible 8x8 NeoPixel RGB LED Matrix Pimoroni Display-O-Tron HAT Pimoroni Scroll pHAT - 11x5 LED Matrix for Raspberry Pi Pimoroni Pan-Tilt HAT for Raspberry Pi Pimoroni Unicorn pHAT 4x8 RGB LED Shield for PaPiRus 2.7" eInk Display HAT for Raspberry Pi from Bare Conductive Pi Cap Pimoroni LED SHIM for Raspberry Pi DISTRIBUTORS CONTACT SUPPORT DISTRIBUTORS EDUCATORS JOBS FAQ SHIPPING & RETURNS TERMS OF SERVICE PRIVACY & LEGAL ABOUT US EXPAND TO SEE DISTRIBUTORS "What I cannot create, I do not understand" - Richard Feynman ENGINEERED IN NYC Adafruit (R) 4.9