PE42462 Document Category: Product Specification UltraCMOS(R) SP6T RF Switch, 10 MHz-8 GHz Features Figure 1 * PE42462 Functional Diagram * High isolation: 35 dB @ 6 GHz * Low insertion loss: 1.1 dB @ 6 GHz RFC * Fast switching time of 210 ns * Power handling of 33 dBm CW * Logic select (LS) pin provides maximum control logic flexibility * Terminated all-off state mode RF1 RF6 RF2 RF5 RF3 RF4 * Packaging - 24-lead 4 x 4 x 0.85 mm QFN CMOS Control Driver and ESD Applications V1 * Wireless infrastructure V2 switch configuration V3 * Wireless applications up to 8 GHz * Filter bank switching 50 * RF signal routing Product Description The PE42462 is a HaRPTM technology-enhanced absorptive SP6T RF switch that supports a frequency range from 10 MHz to 8 GHz. It delivers high isolation, low insertion loss and fast switching time, making this device ideal for filter bank switching and RF signal routing in wireless infrastructure and wireless applications up to 8 GHz. No blocking capacitors are required if DC voltage is not present on the RF ports. The PE42462 is manufactured on Peregrine's UltraCMOS(R) process, a patented advanced form of silicon-oninsulator (SOI) technology. Peregrine's HaRP technology enhancements deliver high linearity and excellent harmonics performance. It is an innovative feature of the UltraCMOS process, offering the performance of GaAs with the economy and integration of conventional CMOS. (c)2017, Peregrine Semiconductor Corporation. All rights reserved. * Headquarters: 9380 Carroll Park Drive, San Diego, CA, 92121 Product Specification DOC-75702-3 - (03/2017) www.psemi.com PE42462 SP6T RF Switch Absolute Maximum Ratings Exceeding absolute maximum ratings listed in Table 1 may cause permanent damage. Operation should be restricted to the limits in Table 2. Operation between operating range maximum and absolute maximum for extended periods may reduce reliability. ESD Precautions When handling this UltraCMOS device, observe the same precautions as with any other ESD-sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the rating specified in Table 1. Latch-up Immunity Unlike conventional CMOS devices, UltraCMOS devices are immune to latch-up. Table 1 * Absolute Maximum Ratings for PE42462 Parameter/Condition Min Max Unit Supply voltage, VDD -0.3 5.5 V Digital input voltage (V1, V2, V3, LS) -0.3 3.6 V RF input power (RFC-RFX, 50) See Figure 2 dBm RF input power into terminated ports, CW(1) (RFX, 50) See Figure 2 dBm +150 C +150 C ESD voltage HBM, all pins(2) 1000 V ESD voltage CDM, all pins(3) 1000 V Maximum junction temperature Storage temperature range -65 Notes: 1) 100% duty cycle, all bands, 50. 2) Human body model (MIL-STD 883 Method 3015). 3) Charged device model (JEDEC JESD22-C101). Page 2 DOC-75702-3 - (03/2017) www.psemi.com PE42462 SP6T RF Switch Recommended Operating Conditions Table 2 lists the recommended operating conditions for the PE42462. Devices should not be operated outside the recommended operating conditions listed below. Table 2 * Recommended Operating Conditions for PE42462 Parameter Supply voltage, VDD Min Typ Max Unit 2.3 3.3 5.5 V 120 200 A Supply current, IDD Digital input high (V1, V2, V3, LS) 1.17 3.6 V Digital input low (V1, V2, V3, LS) -0.3 0.6 V 5 10 A A RF input power, CW (RFC-RFX)(1) See Figure 2 dBm RF input power, pulsed (RFC-RFX)(2) See Figure 2 dBm RF input power into terminated ports, CW (RFX)(1) See Figure 2 dBm +105 C Digital input current V1, V2, V3 LS Operating temperature range -40 +25 Notes: 1) 100% duty cycle, all bands, 50. 2) Pulsed, 5% duty cycle of 4620 s period, 50. DOC-75702-3 - (03/2017) Page 3 www.psemi.com PE42462 SP6T RF Switch Electrical Specifications Table 3 provides the PE42462 key electrical specifications at +25 C,VDD = 3.3V (ZS = ZL = 50), unless otherwise specified. Table 3 * PE42462 Electrical Specifications Parameter Path Condition Operating frequency Insertion loss(1) Isolation(1) Min Typ 10 MHz Max Unit 8 GHz As shown RFC-RF1/6 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 0.7 0.8 0.9 0.9 1.1 1.6 0.9 1.0 1.2 1.5 1.9 2.8 dB dB dB dB dB dB RFC-RF2/5 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 0.8 0.9 0.9 1.0 1.3 1.3 1.0 1.1 1.3 1.6 2.3 2.4 dB dB dB dB dB dB RFC-RF3/4 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 0.8 0.9 1.0 1.1 1.2 1.3 1.0 1.1 1.3 1.7 2.2 2.2 dB dB dB dB dB dB RFC-RF1/6 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 61 45 40 34 29 27 65 47 42 36 32 30 dB dB dB dB dB dB RFC-RF2/5 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 64 52 47 42 30 29 68 55 51 44 34 34 dB dB dB dB dB dB RFC-RF3/4 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 64 51 46 38 33 29 68 53 48 40 35 31 dB dB dB dB dB dB Page 4 DOC-75702-3 - (03/2017) www.psemi.com PE42462 SP6T RF Switch Table 3 * PE42462 Electrical Specifications (Cont.) Parameter Return loss (active port) Return loss (RFC port) Path Condition Min Typ Max Unit RFC-RF1/6 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 25 24 24 21 26 13 dB dB dB dB dB dB RFC-RF2/5 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 24 23 20 18 15 16 dB dB dB dB dB dB RFC-RF3/4 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 24 23 18 15 12 12 dB dB dB dB dB dB RFC-RF1/6 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 25 23 24 23 24 12 dB dB dB dB dB dB RFC-RF2/5 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 24 23 21 19 20 18 dB dB dB dB dB dB RFC-RF3/4 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 24 23 19 16 13 13 dB dB dB dB dB dB DOC-75702-3 - (03/2017) Page 5 www.psemi.com PE42462 SP6T RF Switch Table 3 * PE42462 Electrical Specifications (Cont.) Parameter Return loss (terminated port) Path Condition Min Typ Max Unit RF1/6 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 16 15 15 15 18 21 dB dB dB dB dB dB RF2/5 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 16 15 15 15 18 19 dB dB dB dB dB dB RF3/4 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 16 15 15 15 16 19 dB dB dB dB dB dB RF2-RF1 (RF5-RF6) 1 GHz 2 GHz 4 GHz 6 GHz 8 GHz -2.6 -4.7 -7.5 -9.4 -1.4 -1.3 -2.4 -3.4 -2.8 4.4 0 -0.1 0.8 3.8 10.1 Deg Deg Deg Deg Deg RF3-RF1 (RF4-RF6) 1 GHz 2 GHz 4 GHz 6 GHz 8 GHz -3.0 -5.8 -9.3 -11.2 -10.2 -2.1 -4.0 -5.6 -5.7 -1.0 -1.3 -2.1 -1.9 -0.3 8.2 Deg Deg Deg Deg Deg Relative insertion phase(2) Input 1dB compression point(3) RFC-RFX See Figure 2 dBm Input 0.1dB compression point(3) RFC-RFX See Figure 2 dBm Input IP2 RFC-RFX 100 MHz-8 GHz 105 dBm Input IP3 RFC-RFX 100 MHz-8 GHz 60 dBm 10%/90% RF 100 RF TRISE/TFALL 130 ns Settling time 50% CTRL to 0.05 dB final value 560 920 ns Switching time 50% CTRL to 90% or 10% of RF 210 270 ns Notes: 1) Insertion loss and isolation performance can be improved by a good RF ground on the LS pin (pin 1). 2) Defined with S-parameters, relative insertion phase (RFX-RF1) = S(x+1)1 - S21, where incident Port-1 is RFC, response Port-2 = RF1, and response Port-(x+1) = RFx. 3) The input 1dB and 0.1dB compression points are linearity figures of merit. Refer to Table 2 for the RF input power (50). Page 6 DOC-75702-3 - (03/2017) www.psemi.com PE42462 SP6T RF Switch Switching Frequency Thermal Data The PE42462 has a maximum 25 kHz switching frequency. Switching frequency describes the time duration between switching events. Switching time is the time duration between the point the control signal reached 50% of the final value and the point the output signal reaches within 10% or 90% of its target value. Psi-JT (JT), junction top-of-package, is a thermal metric to estimate junction temperature of a device on the customer application PCB (JEDEC JESD51-2). Spurious Performance The PE42462 spur fundamental occurs around 5 MHz. Its typical performance is -162 dBm/Hz, with 30 kHz bandwidth. JT = (TJ - TT)/P where JT = junction-to-top of package characterization parameter, C/W TJ = die junction temperature, C TT = package temperature (top surface, in the center), C Hot-Switching Capability P = power dissipated by device, Watts The maximum hot switching capability of the PE42462 is 20 dBm above 100 MHz. Hot switching occurs when RF power is applied while switching between RF ports. Table 4 * Thermal Data for PE42462 Parameter Typ Unit JT 23 C/W JA, junction-to-ambient thermal resistance 63 C/W DOC-75702-3 - (03/2017) Page 7 www.psemi.com PE42462 SP6T RF Switch Control Logic Table 5 provides the control logic truth table for PE42462. Table 5 * Truth Table for PE42462 LS(1) V3 V2 V1 RFC-RF1 RFC-RF2 RFC-RF3 RFC-RF4 RFC-RF5 RFC-RF6 0 0 0 0 ON OFF OFF OFF OFF OFF 0 1 0 0 OFF ON OFF OFF OFF OFF 0 0 1 0 OFF OFF ON OFF OFF OFF 0 1 1 0 OFF OFF OFF ON OFF OFF 0 0 0 1 OFF OFF OFF OFF ON OFF 0 1 0 1 OFF OFF OFF OFF OFF ON 1 1 0 1 ON OFF OFF OFF OFF OFF 1 0 0 1 OFF ON OFF OFF OFF OFF 1 1 1 0 OFF OFF ON OFF OFF OFF 1 0 1 0 OFF OFF OFF ON OFF OFF 1 1 0 0 OFF OFF OFF OFF ON OFF 1 0 0 0 OFF OFF OFF OFF OFF ON X(2) 0 1 1 OFF OFF OFF OFF OFF OFF Notes: 1) LS has an internal 1 M pull-up resistor to logic high. Connect LS to GND externally to generate a logic 0. Leaving LS floating will generate a logic 1. 2) LS = don't care, V3 = 0, V2 = V1 = 1, all ports are terminated to provide an all isolated state. Page 8 DOC-75702-3 - (03/2017) www.psemi.com PE42462 SP6T RF Switch Power De-rating Curve Figure 2 shows the power de-rating curve showing P1dB compression, P0.1dB compression, maximum RF input power (pulsed), maximum RF input power (CW), absolute maximum RF terminated power (CW), and maximum RF terminated power (CW). Figure 2 * Power De-rating Curve, 10 MHz-8 GHz, -40 C to +105 C Ambient, 50 P1dB Compression @ 25 C Ambient/Abs. Max. RF Input Power P0.1dB Compression @ 25 C Max. RF Input Power, Pulsed Max. RF Input Power, CW Abs. Max. RF Terminated Power, CW Max. RF Terminated Power, CW Input Power (dBm) 45 40 35 30 25 20 15 10 5 10 100 1000 10000 Frequency (MHz) DOC-75702-3 - (03/2017) Page 9 www.psemi.com PE42462 SP6T RF Switch Isolation Matrix Table 6 provides RFC-to-port isolation and Table 7 provides port-to-port isolation at +25 C, VDD = 3.3V (ZS = ZL = 50). Table 6 * RFC-to-Port Isolation "ON" Port Frequency Isolation (dB) RF1 RF2 RF3 RF4 RF5 RF6 RF1 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz - - - - - - 69 62 57 48 37 34 68 53 48 40 35 31 88 66 60 54 50 47 87 64 58 52 46 45 79 57 51 45 42 38 RF2 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 67 52 46 39 32 30 - - - - - - 69 60 57 49 43 37 88 66 60 53 50 47 86 64 57 52 46 46 77 56 50 45 42 40 RF3 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 65 47 42 36 33 31 68 55 51 44 40 36 - - - - - - 88 66 60 53 49 46 85 63 57 52 47 47 77 55 50 45 42 40 RF4 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 73 51 45 40 37 34 84 62 56 49 46 44 88 65 59 53 49 45 - - - - - - 68 56 51 46 38 37 66 50 45 39 35 33 RF5 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 73 51 45 40 37 34 84 62 56 49 45 43 89 65 59 53 49 46 69 60 57 50 41 38 - - - - - - 68 57 52 44 33 33 RF6 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 74 52 46 40 37 33 84 62 57 49 46 42 87 66 60 53 49 46 68 54 48 41 35 31 69 65 60 51 34 35 - - - - - - Page 10 DOC-75702-3 - (03/2017) www.psemi.com PE42462 SP6T RF Switch Table 7 * Port-to-Port Isolation Isolation (dB) "ON" Port Frequency RF1 RF2 RF3 RF4 RF5 RF6 RF1 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz - - - - - - 65 47 41 35 31 29 67 51 45 39 34 30 89 69 63 57 52 49 89 71 65 60 47 47 88 64 60 53 45 43 RF2 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 65 46 41 35 32 29 - - - - - - 64 45 39 34 30 27 91 70 64 58 53 50 92 75 69 64 50 50 89 74 72 63 51 51 RF3 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 67 51 46 40 37 33 65 47 41 36 33 30 - - - - - - 90 70 64 58 53 50 92 78 72 66 51 51 91 80 79 68 54 54 RF4 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 90 77 65 56 49 46 92 82 75 66 52 53 89 70 65 58 53 50 - - - - - - 65 47 42 36 32 31 67 51 45 39 35 32 RF5 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 92 85 70 57 48 46 92 77 72 64 52 51 89 70 64 58 53 50 64 45 39 34 30 27 - - - - - - 64 45 40 35 29 30 RF6 10-100 MHz 100 MHz-1 GHz 1-2 GHz 2-4 GHz 4-6 GHz 6-8 GHz 87 69 67 56 46 42 91 73 67 61 49 49 88 69 63 57 52 49 67 51 45 39 34 30 65 47 41 35 29 29 - - - - - - DOC-75702-3 - (03/2017) Page 11 www.psemi.com PE42462 SP6T RF Switch Typical Performance Data Figure 3-Figure 20 show the typical performance data at +25 C,VDD = 3.3V (ZS = ZL = 50), unless otherwise specified. Figure 3 * Insertion Loss vs. Frequency (RFC-RFX) Figure 5 * Insertion Loss vs. Frequency Over VDD (RFC-RF1) RFC-RF1 RFC-RF2 RFC-RF3 RFC-RF4 RFC-RF5 RFC-RF6 2.3V Insertion Loss (dB) Insertion Loss (dB) if 0 -1 -2 -3 -4 -5 -6 -7 -8 5.5V 0 -1 -2 -3 -4 -5 -6 -7 -8 0 2 4 6 8 0 2 4 Figure 4 * Insertion Loss vs. Frequency Over Temperature (RFC-RF1) -40 C +25 C +85 C +105 C Return Loss (dB) 2 4 8 Figure 6 * RFC Port Return Loss vs. Frequency 0 -1 -2 -3 -4 -5 -6 -7 -8 0 6 Frequency (GHz) Frequency (GHz) Insertion Loss (dB) 3.3V 6 8 RF2 On RF3 On RF4 On RF5 On RF6 On 0 -10 -20 -30 -40 -50 -60 0 Frequency (GHz) RF1 On 2 4 6 8 Frequency (GHz) Page 12 DOC-75702-3 - (03/2017) www.psemi.com PE42462 SP6T RF Switch Figure 7 * RFC Port Return Loss vs. Frequency Over Temperature (RF1 On) -40 C +25 C +85 C Figure 10 * RF1 Active Port Return Loss vs. Frequency Over Temperature +105 C -40 C Return Loss (dB) -10 -20 -30 -40 -50 -60 0 2 4 6 -20 -30 -40 -50 -60 8 0 2 4 2.3V 3.3V 8 Figure 11 * RF1 Active Port Return Loss vs. Frequency Over VDD 5.5V 2.3V 0 3.3V 5.5V 0 -10 Return Loss (dB) Return Loss (dB) 6 Frequency (GHz) Figure 8 * RFC Port Return Loss vs. Frequency Over VDD (RF1 On) -20 -30 -40 -50 -60 -10 -20 -30 -40 -50 -60 0 2 4 6 8 0 2 4 6 8 Frequency (GHz) Frequency (GHz) Figure 12 * Terminated Port Return Loss vs. Frequency (RF1 On) Figure 9 * Active Port Return Loss vs. Frequency RF1 RF2 RF3 RF4 RF5 RF6 RF2 RF3 RF4 RF5 RF6 0 Return Loss (dB) 0 Return Loss (dB) +105 C -10 Frequency (GHz) -10 -20 -30 -40 -50 -60 +85 C 0 0 Return Loss (dB) +25 C -10 -20 -30 -40 -50 -60 -70 -80 0 1 2 3 4 5 6 7 8 0 2 4 6 8 Frequency (GHz) Frequency (GHz) DOC-75702-3 - (03/2017) Page 13 www.psemi.com PE42462 SP6T RF Switch Figure 13 * RF2 Terminated Port Return Loss vs. Frequency Over Temperature (RF1 On) +25 C +85 C +105 C 2.3V 0 0 -10 -10 Isolation (dB) Return Loss (dB) -40 C Figure 16 * Isolation vs. Frequency Over VDD (RF1-RF2, RF1 On) -20 -30 -40 -50 -60 -70 -20 -30 -40 -50 -60 -80 0 2 4 6 8 0 2 Frequency (GHz) 2.3V 4 6 8 Frequency (GHz) Figure 14 * RF2 Terminated Port Return Loss vs. Frequency Over VDD (RF1 On) 3.3V Figure 17 * Isolation vs. Frequency Over Temperature (RFC-RF2, RF1 On) 5.5V -40 C 0 0 -10 -10 Isolation (dB) Return Loss (dB) 5.5V -70 -80 -20 -30 -40 -50 -60 +25 C +85 C +105 C -20 -30 -40 -50 -60 -70 -70 -80 -80 0 2 4 6 0 8 2 Frequency (GHz) -40 C +25 C 4 6 8 Frequency (GHz) Figure 15 * Isolation vs. Frequency Over Temperature (RF1-RF2, RF1 On) +85 C Figure 18 * Isolation vs. Frequency Over VDD (RFC-RF2, RF1 On) +105 C 2.3V 0 0 -10 -10 Isolation (dB) Isolation (dB) 3.3V -20 -30 -40 -50 -60 3.3V 5.5V -20 -30 -40 -50 -60 -70 -70 -80 -80 0 2 4 6 0 8 Frequency (GHz) 2 4 6 8 Frequency (GHz) Page 14 DOC-75702-3 - (03/2017) www.psemi.com PE42462 SP6T RF Switch Figure 20 * IIP3 vs. RF Port Measured 800 MHz IIP2 2 GHz IIP2 800 MHz IIP3 2 GHz IIP3 4 GHz IIP2 8 GHz IIP2 4 GHz IIP3 8 GHz IIP3 140 80 130 75 IIP3 (dBm) IIP2 (dBm) Figure 19 * IIP2 vs. RF Port Measured 120 110 100 90 70 65 60 55 50 45 80 40 RF1 RF2 RF3 RF4 RF5 RF6 RF1 RF Port Measured RF2 RF3 RF4 RF5 RF6 RF Port Measured DOC-75702-3 - (03/2017) Page 15 www.psemi.com PE42462 SP6T RF Switch Evaluation Kit The high-throw count RF switch evaluation kit (EVK) includes hardware required to control and evaluate the functionality of the high-throw count switches. The high-throw count RF switch evaluation software can be downloaded at www.psemi.com and requires a PC running Windows(R) operating system to control the USB interface board. Refer to the Multi-throw Count RF Switch Evaluation Kit (EVK) User's Manual for more information. Figure 21 * Evaluation Board Layout for PE42462 Page 16 DOC-75702-3 - (03/2017) www.psemi.com PE42462 SP6T RF Switch Pin Information Table 8 * Pin Descriptions for PE42462 This section provides pinout information for the PE42462. Figure 22 shows the pin map of this device for the available package. Table 8 provides a description for each pin. Pin No. Pin Name 1 LS 2 RF2(1) 3, 5-7, 12- 14, 16, 18, 21, 23 GND 4 RF3(1) 8 VDD Supply voltage (nominal 3.3V) 9 V1 Digital control logic input 1 10 V2 Digital control logic input 2 11 V3 Digital control logic input 3 15 RF4(1) RF port 4 17 RF5(1) RF port 5 19 RF6(1) RF port 6 20 NC(2) No connect 22 RFC(1) RF common port 24 RF1(1) RF port 1 Pad GND RF1 GND RFC GND NC RF6 23 22 21 20 19 Pin 1 Dot Marking 24 Figure 22 * Pin Configuration (Top View) LS 1 18 GND RF2 2 17 RF5 GND 3 16 GND RF3 4 15 RF4 GND 5 14 GND GND 6 13 GND 7 8 9 10 11 12 GND VDD V1 V2 V3 GND Exposed Ground Pad Description Logic Select--used to determine the definition for V1, V2 and V3 pins RF port 2 Ground RF port 3 Exposed pad: ground for proper operation Notes: 1) RF pins 2, 4, 15, 17, 19, 22 and 24 must be at 0 VDC. The RF pins do not require DC blocking capacitors for proper operation if the 0 VDC requirement is met. 2) Pin 20 (NC) can be connected to GND or left not connected externally. DOC-75702-3 - (03/2017) Page 17 www.psemi.com PE42462 SP6T RF Switch Packaging Information This section provides packaging data including the moisture sensitivity level, package drawing, package marking and tape-and-reel information. Moisture Sensitivity Level The moisture sensitivity level rating for the PE42462 in the 24-lead 4 x 4 x 0.85 mm QFN package is MSL1. Package Drawing Figure 23 * Package Mechanical Drawing for 24-lead 4 x 4 x 0.85 mm QFN 0.10 C A 4.00 2.700.05 (2X) 0.400.05 (x24) B 0.50 13 0.60 (x24) 0.30 (x24) 0.50 (x20) 18 (x20) 12 19 4.00 2.700.05 2.75 0.250.05 (x24) 0.10 C 24 7 6 1 2.50 Ref. (2X) Pin #1 Corner BOTTOM VIEW TOP VIEW 0.10 C 0.10 0.05 0.850.05 0.05 C 4.40 Chamfer 0.30 x 45 2.75 4.40 RECOMMENDED LAND PATTERN C A B C ALL FEATURES SEATING PLANE 0.203 Ref. 0.05 C SIDE VIEW Top-Marking Specification Figure 24 * Package Marking Specifications for PE42462 42462 YYWW ZZZZZZ = YY = WW = ZZZZZZ = Pin 1 indicator Last two digits of assembly year Assembly work week Assembly lot code (Maximum six characters) Page 18 DOC-75702-3 - (03/2017) www.psemi.com PE42462 SP6T RF Switch Tape and Reel Specification Figure 25 * Tape and Reel Specifications for 24-lead 4 x 4 x 0.85 mm QFN Direction of Feed Section A-A P1 P0 see note 1 T P2 see note 3 D1 D0 A E F see note 3 B0 A0 K0 A0 B0 K0 D0 D1 E F P0 P1 P2 T W0 4.35 4.35 1.10 1.50 + 0.10/ -0.00 1.50 min 1.75 0.10 5.50 0.05 4.00 8.00 2.00 0.05 0.30 0.05 12.00 0.30 A W0 Pin 1 Notes: 1. 10 Sprocket hole pitch cumulative tolerance 0.2 2. Camber in compliance with EIA 481 3. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole Dimensions are in millimeters unless otherwise specified DOC-75702-3 - (03/2017) Device Orientation in Tape Page 19 www.psemi.com PE42462 SP6T RF Switch Ordering Information Table 9 lists the available ordering codes for the PE42462 as well as available shipping methods. Table 9 * Order Codes for PE42462 Order Codes Description Packaging Shipping Method PE42462A-X PE42462 SP6T RF switch Green 24-lead 4 x 4 mm QFN 500 units/T&R EK42462-02 PE42462 Evaluation kit Evaluation kit 1/Box Document Categories Advance Information The product is in a formative or design stage. The datasheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The datasheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The datasheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification Form). Sales Contact For additional information, contact Sales at sales@psemi.com. Disclaimers The information in this document is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user's own risk. No patent rights or licenses to any circuits described in this document are implied or granted to any third party. Peregrine's products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. Patent Statement Peregrine products are protected under one or more of the following U.S. patents: patents.psemi.com Copyright and Trademark (c)2017, Peregrine Semiconductor Corporation. All rights reserved. The Peregrine name, logo, UTSi and UltraCMOS are registered trademarks and HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp. Product Specification www.psemi.com DOC-75702-3 - (03/2017)