© Semiconductor Components Industries, LLC, 2011
April, 2011 Rev. 6
1Publication Order Number:
BS170/D
BS170G
Small Signal MOSFET
500 mA, 60 Volts
NChannel TO92 (TO226)
Features
This is a PbFree Device*
MAXIMUM RATINGS
Rating Symbol Value Unit
DrainSource Voltage VDS 60 Vdc
GateSource Voltage
Continuous
Nonrepetitive (tp 50 ms)
VGS
VGSM
±20
±40
Vdc
Vpk
Drain Current (Note) ID0.5 Adc
Total Device Dissipation @ TA = 25°C PD350 mW
Operating and Storage Junction
Temperature Range
TJ, Tstg 55 to
+150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
NOTE: The Power Dissipation of the package may result in a lower continuous
drain current.
*For additional information on our PbFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
BS170
AYWWG
G
A = Assembly Location
Y = Year
WW = Work Week
G= PbFree Package
MARKING DIAGRAM
& PIN ASSIGNMENT
D
G
TO92 (TO226)
CASE 29
STYLE 30
NChannel
S
123
1
Drain
3
Source
2
Gate
500 mA, 60 Volts
RDS(on) = 5.0 W
http://onsemi.com
(Note: Microdot may be in either location)
BS170G
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS
Gate Reverse Current
(VGS = 15 Vdc, VDS = 0)
IGSS 0.01 10 nAdc
DrainSource Breakdown Voltage
(VGS = 0, ID = 100 mAdc)
V(BR)DSS 60 90 Vdc
ON CHARACTERISTICS (Note 1)
Gate Threshold Voltage
(VDS = VGS, ID = 1.0 mAdc)
VGS(Th) 0.8 2.0 3.0 Vdc
Static DrainSource On Resistance
(VGS = 10 Vdc, ID = 200 mAdc)
rDS(on) 1.8 5.0 W
Drain Cutoff Current
(VDS = 25 Vdc, VGS = 0 Vdc)
ID(off) 0.5 mA
Forward Transconductance
(VDS = 10 Vdc, ID = 250 mAdc)
gfs 200 mmhos
SMALLSIGNAL CHARACTERISTICS
Input Capacitance
(VDS = 10 Vdc, VGS = 0, f = 1.0 MHz)
Ciss 60 pF
SWITCHING CHARACTERISTICS
TurnOn Time
(ID = 0.2 Adc) See Figure 1
ton 4.0 10 ns
TurnOff Time
(ID = 0.2 Adc) See Figure 1
toff 4.0 10 ns
1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%.
ORDERING INFORMATION
Device Package Shipping
BS170G TO92 (TO226)
(PbFree)
1000 Unit/Tube
BS170RLRAG TO92 (TO226)
(PbFree)
2000 Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
BS170G
http://onsemi.com
3
, DRAIN CURRENT (AMPS)
D(on)
I
, DRAIN CURRENT (AMPS)
D(on)
I
Figure 1. Switching Test Circuit
20 dB
50 W ATTENUATOR
PULSE GENERATOR
+25 V
Vin
40 pF
1.0 MW
50 W
125 W
50 W
Vout
TO SAMPLING SCOPE
50 W INPUT
OUTPUT
INVERTED
INPUT PULSE
WIDTH
10%
50%
10%
90%
90%
toff
ton
Figure 2. Switching Waveforms
RESISTIVE SWITCHING
(Vin Amplitude 10 Volts)
Vin
Vout
2.0
1.6
1.2
0.8
0.4
0
, THRESHOLD VOLTAGE
50 150
050
100
TJ, JUNCTION TEMPERATURE (°C)
VGS(th)
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
0.8
0.4
1.2
2.0
1.6
1.0 2.0 3.0 4.00
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
0.8
0.4
1.2
1.6
2.0
01020 30
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
C, CAPACITANCE (pF)
0 10 2030 4050
60
40
20
80
100
40 60
Figure 3. VGS(th) Normalized versus Temperature Figure 4. OnRegion Characteristics
Figure 5. Output Characteristics Figure 6. Capacitance versus
DrainToSource Voltage
VGS = 10 V
VGS = 0 V
Ciss
Coss
Crss
9.0 V
8.0 V
7.0 V
6.0 V
5.0 V
4.0 V
VDS = VGS
ID = 1.0 mA
VGS = 10 V
9.0 V
8.0 V
7.0 V
6.0 V
5.0 V
4.0 V
BS170G
http://onsemi.com
4
PACKAGE DIMENSIONS
TO92 (TO226)
CASE 2911
ISSUE AM
STYLE 30:
PIN 1. DRAIN
2. GATE
3. SOURCE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
R
A
P
J
L
B
K
G
H
SECTION XX
C
V
D
N
N
XX
SEATING
PLANE DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.175 0.205 4.45 5.20
B0.170 0.210 4.32 5.33
C0.125 0.165 3.18 4.19
D0.016 0.021 0.407 0.533
G0.045 0.055 1.15 1.39
H0.095 0.105 2.42 2.66
J0.015 0.020 0.39 0.50
K0.500 --- 12.70 ---
L0.250 --- 6.35 ---
N0.080 0.105 2.04 2.66
P--- 0.100 --- 2.54
R0.115 --- 2.93 ---
V0.135 --- 3.43 ---
1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P
AND BEYOND DIMENSION K MINIMUM.
RA
P
J
B
K
G
SECTION XX
C
V
D
N
XX
SEATING
PLANE DIM MIN MAX
MILLIMETERS
A4.45 5.20
B4.32 5.33
C3.18 4.19
D0.40 0.54
G2.40 2.80
J0.39 0.50
K12.70 ---
N2.04 2.66
P1.50 4.00
R2.93 ---
V3.43 ---
1
T
STRAIGHT LEAD
BULK PACK
BENT LEAD
TAPE & REEL
AMMO PACK
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
BS170/D
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81357733850
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative