HCMCONNECTOR Board-to-wire/Wire-to-wire HCM HIT Features Low profile, Miniaturization in the direction of mating Reliability and achievement CPT BMD Ensuring the reliabilities of an indispensable characteristic and mechanism etc. to the connector for automobile, this product has several adoption results proven in automotive electrical equipment miniaturized rapidly. MIO We have an abundant variation of PC board lock mechanism, lock type, wire-to-wire type and so on, according to your needs. HCM Variations AIT Using the short length female terminal, low profile in the direction of mating is realized CIT HIC SQS SQM 0.64 non-waterproof low profile type connector for automobile corresponding to the miniaturization of the automotive electrical equipment. Comply with the performance specification for automotive electrical connector systems, and corresponds to various purposes and mounting design. SQH SQS2 SQW SQF SHUNT RING FOX CN EA1 WPZ JUNCTION BOX INDEX Contact JST if Lead-Free product is required. Contact JST for details. FMT Current rating: 5A AC, DC (0.5mm2, Single circuit) Voltage rating: 14V AC, DC Temperature range: -40C to +100C (including temperature rise in applying electrical current) Contact resistance: Initial value/20m max. After environmental testing/20m max. Insulation resistance: 20M min. Withstanding voltage: 1,000V AC/minute Applicable wire: SE/ AVSS/ CAVS 0.3mm2 to 0.5mm2 FEL Specifications 10 HCMCONNECTOR Board-to-wire/Wire-to-wire HIT Female terminal Applicable wire range AIT Model No. Conductor (mm2) Insulation O.D. mm(in.) SHCM-A03T-P025 0.3 to 0.5 1.4 to 2.1 (.055 to .083) 5,000 SHCM-A04T-P025 0.2 1.2 to 1.7 (.047 to .067) 5,000 11.6(.457) Q'ty/reel HCM MIO Material and Finish CPT 2.5(.098) Copper alloy, tin-plated (reflow treatment) BMD 14.8(.583) SQM 14.8(.583) SQS 15.0(.591) SQH 12.46(.491) Housing 2.54(.100) 4x2.54(.100) =10.16(.400) 7.95(.313) SQS2 SQW 11.0(.433) Housing 7.95(.313) 2.54(.100) 3x2.54(.100) =7.62(.300) Retainer HCMPB-A05-S FEL 14.8(.583) SQF SHUNT RING HCMPB-04-S Retainer 14.8(.583) HIC Inner lock type 11.0(.433) CIT Female connector 32.78(1.291) 32.78(1.291) FMT Housing FOX 7.95(.313) 7.95(.313) Housing 2.54(.100) 2.54(.100) CN 11x2.54(.100)=27.94(1.100) Retainer 11x2.54(.100)=27.94(1.100) Retainer HCMPB-12-S HCMPB-A12-S EA1 WPZ JUNCTION BOX INDEX 11 Type Inner lock Circuits Model No. Q'ty/box 4 HCMPB-04-S 600 5 HCMPB-A05-S 500 12 HCMPB-12-S 200 12 HCMPB-A12-S 200 Material Housing: PBT, natural (white) Retainer: PBT, blue HCM Board-to-wire HIT Female connector Outer lock type W/CPA type AIT 15.8(.622) 8.0(.315) MIO 14.8(.583) HCM [20.8(.819)] 15.0(.591) CPT 17.54(.691) Housing 9.25(.364) 8.95(.352) 4x2.54(.100) =10.16(.400) Retainer 2.54(.100) Retainer 5x2.54(.100) =12.7(.500) HIC HCMPB-05-S HCMPB-C06-S SQS Double-row type SQH 14.8(.583) SQM 14.8(.583) Double-row type Housing 12.55(.494) 12.55(.494) Housing 2.54(.100) 4x2.54(.100) =10.16(.400) Retainer HCMDPB-08-S SQF SHUNT RING 3x2.54(.100) =7.62(.300) SQS2 SQW 15.0(.591) 12.46(.491) 2.54(.100) CIT 2.54(.100) BMD 10.75(.423) Housing Retainer HCMDPB-09-S FEL Model No. Q'ty/box Outer lock 5 HCMPB-05-S 500 W/CPA 6 HCMPB-C06-S 300 Double-row 8 HCMDPB-08-S 400 Double-row 9 HCMDPB-09-S 400 CN Material Housing: PBT, natural (white) Retainer: PBT, blue CPA housing (Only for 6 circuits): Glass-filled PBT, red FOX Circuits FMT Type EA1 WPZ JUNCTION BOX INDEX 12 HCMCONNECTOR HIT Header Board-to-wire Top entry type Inner lock type Circuits AIT 5 Model No. B05B-HCMSS-R Q'ty/box 433 12.7(.500) HCM Material and Finish Pin: Brass, nickel-undercoated, tin-plated (reflow treatment) Housing: Glass-filled PBT, natural (white) MIO 6.8(.268) CPT 8.5(.335) 17.78(.700) BMD 2.54(.100) 10.16(.400) CIT Outer lock type Circuits Model No. Q'ty/box 5 circuits B05B-AHCMSK 288 6 B06B-HCMSK 240 SQS 13.7(.539) HIC 5 Material and Finish Pin: Brass, nickel-undercoated, tin-plated (reflow treatment) Housing: Glass-filled PBT, natural (white) SQH 1 5 12.0(.472) 10.16(.400) 6 circuits SQF SHUNT RING 13.7(.539) SQS2 SQW 2.54(.100) 20.32(.800) Circuit No. FEL 1 6 12.0(.472) SQM 17.78(.700) Circuit No. 2.54(.100) FMT 12.7(.500) FOX Screw hole type Circuits 4 EA1 13.7(.539) CN 4 Circuit No. 2.54(.100) 7.62(.300) 10.8(.425) WPZ JUNCTION BOX INDEX 13 26.32(1.036) 20.32(.800) 1 B04B-HCMSS-RA Q'ty/box 300 Material and Finish Pin: Brass, nickel-undercoated, tin-plated (reflow treatment) Housing: Glass-filled PBT, natural (white) 15.24(.600) 2.5(.098)dia. Model No. HCM Header Hook pin type HIT Side entry type Model No. Q'ty/box 4 S04B1-HCMSS 165 3 S04B1A-HCMSS 165 13.7(.539) CPT 19.05(.750) 10.8(.425) 10.8(.425) CIT 12.8(.504) BMD 4 12.8(.504) Circuit No. 1 MIO 15.24(.600) HCM Material and Finish Pin: Brass, nickel-undercoated, tin-plated (reflow treatment) Housing: Glass-filled PBT, natural (white) Reinforcement: Brass, nickel-undercoated, tin-plated (reflow treatment) AIT Circuits 4 circuits 2.54(.100) HIC 7.62(.300) 13.97(.550) SQS 3 circuits SQH 13.7(.539) SQM 15.24(.600) 1 4 13.97(.550) SQF SHUNT RING 2.54(.100) SQS2 SQW 19.05(.750) Circuit No. FEL FMT FOX CN EA1 WPZ JUNCTION BOX INDEX 14 HCMCONNECTOR Wire-to-wire HIT Male terminal Applicable wire range AIT HCM Model No. Conductor (mm2) Insulation O.D. mm(in.) SHCMW-A03T-040 0.3 to 0.5 1.4 to 2.1 (.055 to .083) Q'ty/reel 5,000 Material and Finish [23.85(.939)] MIO Brass, tin-plated (reflow treatment) 7.2(.283) 8.95(.352) CPT BMD CIT Male connector HIC Circuits Model No. Q'ty/bag 5 HCMWSB-05-K 200 SQS Material PBT, black SQM SQS2 SQW 12.5(.492) SQH 17.8(.701) SQF SHUNT RING 14.65(.577) 30.8(1.213) 2.54(.100) 4x2.54(.100)=10.16(.400) FEL Female connector FMT FOX Model No. Q'ty/bag 5 HCMWPB-05-K 500 Material PBT, black CN EA1 14.8(.583) 8.65(.341) WPZ JUNCTION BOX INDEX 15 Circuits 4x2.54(.100)=10.16(.400) 15.0(.591) HCM HIT PC board layout +.004 1.35+0.1 0 (.053 0 )dia. 2.50.05(.098.002) 2.50.05(.098.002) 2.540.05(.100.002) 2.540.05(.100.002) 10.160.05(.400.002) 10.160.05(.400.002) 12.70.05(.500.002) 4.450.05(.175.002) 7.620.05(.300.002) +.004 3+0.1 0 (.118 0 )dia. S04B1-HCMSS +.004 3+0.1 0 (.118 0 )dia. 13.970.1(.550.004) S04B1A-HCMSS SQM B04B-HCMSS-R4 13.970.1(.550.004) SQS 2.540.05(.100.002) 7.620.05(.300.002) +.004 1.1+0.1 0 (.043 0 )dia. SQH Note: 1. Tolerances are non-cumulative: 0.05mm (.002") for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. SQS2 SQW Assembly layout Top entry type Side entry type Wire-to-wire type SQF SHUNT RING HCMPB-A05-S 16.5(.650) 17.5(.689) HCMPB-05-S HIC 9.40.05(.370.002) +.004 1.1+0.1 0 (.043 0 )dia. 9.40.05(.370.002) 2.540.05(.100.002) 2.540.05(.100.002) CIT 20.320.1(.800.004) BMD +.004 3.4+0.1 0 (.134 0 )dia. CPT B06B-HCMSK B05B-AHCMSK MIO 2.540.05(.100.002) B05B-HCMSS-R +.004 1.1+0.1 0 (.043 0 )dia. 2.50.05(.098.002) +.004 2.2+0.1 0 (.087 0 )dia. +.004 1.1+0.1 0 (.043 0 )dia. HCM +.004 1.1+0.1 0 (.043 0 )dia. +.004 2.7+0.1 0 (.106 0 )dia. AIT +.004 1.35+0.1 0 (.053 0 )dia. 17.5(.689) 34.1(1.343) FEL B05B-HCMSS-R B05B-AHCMSK FMT HCMPB-04-S S04B1-HCMSS HCMWPB-05-K CN EA1 B04B-HCMSS-R4 SHCM-A03T-P025 SHCM-A04T-P025 Crimping machine AP-K2N Crimp applicator MKS-L Dies Crimp applicator with dies MK/SHCM-A03-025 APLMK SHCM-A03-025 MK/SHCM-A04-025 APLMK SHCM-A04-025 Note: When crimping operation is conducted by using other than above applicator and die set, JST cannot guarantee the performance of connector. WPZ JUNCTION BOX INDEX Crimping machine, Applicator Strip terminal HCMWSB-05-K FOX 17.5(.689) HCMPB-04-S 16