P Series Data Sheet 100 - 195 Watt DC-DC Converters Features Input voltage up to 150 VDC, surges up to 168 V 1 to 4 isolated outputs 3.3 to 96 VDC Class I equipment PRODUCT SERVICE Production monitored Type tested RoHS lead-solder-exempt compliant1 Extremely slim case (4 TE), fully enclosed Extremely low inrush current, hot swappable Operating ambient temperature range -40 to 71 C with convection cooling * * * * 1 The solder exemption refers to all the restricted materials except lead in solder. Model Selection Output 1 Output 2 Output 3 Output 4 Vo nom Po nom Po max Vo nom Po nom Po max Vo nom Po nom Po max Vo nom Po nom Po max [VDC] [W] [W] [VDC] [W] [W] [VDC] [W] [W] [VDC] [W] [W] 3.3 100 132 5.1 122 183 3.3 50 66 5.1 61 91 5.1 61 91 5.1 61 91 12 60 96 12 60 96 15 60 97 15 60 97 24 60 96 24 60 96 5.1 61 91 12 30 48 12 30 48 5.1 61 91 15 30 48 15 30 48 5.1 61 91 24 30 48 24 30 48 5.1 20 30 12 30 48 12 30 48 3.3 10 20 12 30 48 12 30 48 12 30 48 12 30 48 15 30 48 15 30 48 15 30 48 15 30 48 24 30 48 24 30 48 24 30 48 24 30 48 Type Type Input voltage Input voltage 16 - 36 VDC 33.6 - 75 VDC BP 1101-7R CP 1101-7R BP 1001-7R CP 1001-7R BP 2101-7R CP 2101-7R BP 2001-7R CP 2001-7R BP 2320-7R CP 2320-7R BP 2540-7R CP 2540-7R BP 2660-7R CP 2660-7R BP 3020-7R CP 3020-7R BP 3040-7R CP 3040-7R BP 3060-7R CP 3060-7R BP 4720-7R CP 4720-7R BP 4320-7R CP 4320-7R BP 4540-7R CP 4540-7R BP 4660-7R CP 4660-7R Output 1 Output 2 Output 3 Output 4 Type Vo nom Po nom Po max Vo nom Po nom Po max Vo nom Po nom Po max Vo nom Po nom Po max Input voltage [VDC] [W] [W] [VDC] [W] [W] [VDC] [W] [W] [VDC] [W] [W] 40 - 100.8 VDC 3.3 100 132 DP 1101-7R 5.1 122 183 DP 1001-7R 3.3 50 66 5.1 61 91 DP 2101-7R 5.1 61 91 5.1 61 91 DP 2001-7R 12 60 96 12 60 96 DP 2320-7R 15 60 97 15 60 97 DP 2540-7R 24 60 96 24 60 96 DP 2660-7R 5.1 61 91 12 30 48 12 30 48 DP 3020-7R 5.1 61 91 15 30 48 15 30 48 DP 3040-7R 5.1 61 91 24 30 48 24 30 48 DP 3060-7R 5.1 20 30 12 30 48 12 30 48 3.3 10 20 DP 4720-7R 12 30 48 12 30 48 12 30 48 12 30 48 DP 4320-7R 15 30 48 15 30 48 15 30 48 15 30 48 DP 4540-7R 24 30 48 24 30 48 24 30 48 24 30 48 DP 4660-7R MAR 25, 2004 revised to JUL 27, 2006 Page 1 of 5 Type Input voltage 66 - 150 VDC EP 1101-7R EP 1001-7R EP 2101-7R EP 2001-7R EP 2320-7R EP 2540-7R EP 2660-7R EP 3020-7R EP 3040-7R EP 3060-7R EP 4720-7R EP 4320-7R EP 4540-7R EP 4660-7R www.power-one.com P Series Data Sheet 100 - 195 Watt DC-DC Converters Output 1 Vo nom Po nom Po max [VDC] [W] [W] 3.3 100 132 5.1 122 183 3.3 50 66 5.1 61 91 12 60 96 15 60 97 24 60 96 5.1 61 91 5.1 61 91 5.1 61 91 5.1 20 30 12 30 48 15 30 48 24 30 48 Output 2 Vo nom Po nom Po max [VDC] [W] [W] 5.1 61 91 5.1 61 91 12 60 96 15 60 97 24 60 96 12 30 48 15 30 48 24 30 48 12 30 48 12 30 48 15 30 48 24 30 48 Output 3 Vo nom Po nom Po max [VDC] [W] [W] 12 30 48 15 30 48 24 30 48 12 30 48 12 30 48 15 30 48 24 30 48 Output 4 Vo nom Po nom Po max [VDC] [W] [W] 3.3 10 20 12 30 48 15 30 48 24 30 48 Type Input voltage 21.6 - 50.4 VDC GP 1101-7R GP 1001-7R GP 2101-7R GP 2001-7R GP 2320-7R GP 2540-7R GP 2660-7R GP 3020-7R GP 3040-7R GP 3060-7R GP 4720-7R GP 4320-7R GP 4540-7R GP 4660-7R Input Input voltage refer to selection chart Output Efficiency Vi nom, Io nom Nominal output current Io1,2,3,4 nom Maximal output current Io1,2,3,4 max Voltage setting accuracy 1, 2 Vi nom, Io nom Voltage setting accuracy 3, 4 Vi nom, Io nom Worst case output voltage 1, 2 Vi min to Vi max, 0 to Io1,2 max, TC min to TC max Minimum output current 1, 4 in parallel configuration not required in individual or series configuration Minimum output current 2, 3 in parallel configuration not required in individual or series configuration Cross load reg. output 4 Io1,4 min to Io1,4 max Cross load reg. output 3 Io2,3 min to Io2,3 max Output voltage switching noise IEC/EN 61204, total, peak-peak Common power limitation (Po1 + Po4) rectangular U/I characteristic (Po2 + Po3) rectangular U/I characteristic up to 92% Po1,2,3,4 nom/Vo1,2,3,4 nom Po1,2,3,4 max/Vo1,2,3,4 up to 0.6% Vo1,2 nom 2% Vo3,4 nom 1.6% Vo nom 0A 5% Io1,4 nom 0A 5% Io2,3 nom typ. 100 m * (Io1-Io4) typ. 100 m * (Io2-Io3) typ. 0.4% Vo nom typ. 130% Po max/2 typ. 130% Po max/2 Protection Input reverse polarity Input undervoltage lockout Input overvoltage lockout Input transient protection Output Output overvoltage Overtemperature built-in fuse typ. 90% Vi min typ. 110% Vi max varistor no-load, overload and short-circuit proof transient suppressor or 2nd control loop switch-off with auto restart typ. 125% Vo nom TC typ. 100C Control Output voltage adjustment Inhibit on primary side Status indication Output good signal (Out OK) output 1, 4 (with feature R) TTL input, output disabled if left open-circuit LEDs: In OK, Out OK isolated open-collector signal 60 - 110% Vo nom Safety Approvals Class of equipment Protection degree Electric strength test voltage MAR 25, 2004 revised to JUL 27, 2006 EN 60950, UL 1950, CSA C22.2 No. 950 I/case, I/O, I/aux O/case, aux/case O/O, O/aux Page 2 of 5 class I IP 40 2100 VDC 2100 VDC 500 V DC www.power-one.com P Series Data Sheet 100 - 195 Watt DC-DC Converters EMC Electrostatic discharge Electromagnetic field Electr. fast transients/bursts Surge Conducted disturbances Electromagnetic emissions IEC/EN 61000-4-2, level 4 (8/15 kV) IEC/EN 61000-4-3, level 3 (10 V/m) IEC/EN 61000-4-4, input/output, level 3/4 (2/4 kV) IEC/EN 61000-4-5, input, level 2/3 (1/2 kV) IEC/EN 61000-4-6, level 2/3 (3/10 V) CISPR 22/EN 55022, conducted criterion B criterion A criterion B criterion B criterion A class B Environmental Operating ambient temp. (-7) Operating case temp. (-7) Storage temperature Damp heat Vibration, sinusoidal Shock Bump Random vibration Vi nom, Po nom, convection cooled Vi nom, Po nom /Po max non operational IEC/EN 60068-2-3, 93%, 40C IEC/EN 60068-2-6, 10 - 60/60 - 2000 Hz IEC/EN 60068-2-27, 11 ms IEC/EN 60068-2-29, 11 ms IEC/EN 60068-2-64, 20 - 500 Hz -25 to 71C -25 to 95C -40 to 100C 56 days 0.35 mm/5 gn 50 gn 25 gn 4.9 gn rms Options Extended temperature range Out OK output Current sharing Inhibit on output side Synchronisation Heat Sink MAR 25, 2004 revised to JUL 27, 2006 -40 to 71C, ambient, operating excludes option i excludes option D height 20 mm or 30 mm Page 3 of 5 -9 D T i W B1 or B3 www.power-one.com P Series Data Sheet 100 - 195 Watt DC-DC Converters Mechanical data The converters are designed to be inserted into a 19" rack according to IEC 60297-3. 09099 104 0.15 European Projection 20 Front plate Rear face (171.9) Measuring point of case temperature TC 127 (164) 100 M3; 4 deep 70 Main face Back plate 111 104 100 95 13.22 6.4 8.14 13.43 20.32 (4 TE) (19.8) 17 94 = 4.5 LED "Out OK" green LED "In OK" green MAR 25, 2004 revised to JUL 27, 2006 Page 4 of 5 www.power-one.com P Series Data Sheet 100 - 195 Watt DC-DC Converters Pinout Information Pin 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 P 1000 P 2000 Vo1+ Output 1 Vo1- Output 1 S+ S- R Sense Sense Control of Vo T n.c. Out OK+ i+ Out OK- i- Current sharing Not connected Output good Inhibit second. Output good Inhibit second. Prot. ground Inhibit Synchronizat. Input Input i W Vi+ Vi- 30 32 26 28 22 24 18 20 Vo1+ Vo2+ Vo1- Vo2- S1+ S1- R1 T1 S2+ S2- Out OK+ i+ Out OK- i- i W Vi+ Vi- 14 16 10 12 6 8 Output 1 Output 2 Output 1 Output 2 Sense 1 Sense 1 Control of Vo1 Current sharing Sense 2 Sense 2 Output good Inhibit second. Output good Inhibit second. Prot. ground Inhibit Synchronizat. Input Input P 3000 Vo1+ Vo2+ Vo1- Vo2- S1+ S1- R1 T1 Vo3+ Vo3+ Out OK+ i+ Out OK- i- i W Vi+ Vi- 30 S10025 4 32 P 4000 Output 1 Output 2 Output 1 Output 2 Sense 1 Sense 1 Control of Vo1 Current sharing Output 3 Output 3 Output good Inhibit second. Output good Inhibit second. Prot. ground Inhibit Synchronizat. Input Input 26 28 24 22 Vo1+ Vo2+ Vo1- Vo2- Vo4+ Vo4- R1/4 Output 1 Output 2 Output 1 Output 2 Output 4 Output 4 Control of Vo1/4 Vo3+ Vo3+ Out OK+ i+ Out OK- i- Output 3 Output 3 Output good Inhibit second. Output good Inhibit second. Prot. ground Inhibit Synchronizat. Input Input i W Vi+ Vi- 18 20 16 14 12 8/10 S10051 4/6 Accessories Additional external heat sinks for operation above Po nom or TA max (option B1, B3) Front panels for 19" rack mounting in 3U or 6U configuration (Schroff/Intermas) Mating H15 connectors with screw, solder, fast-on or press-fit terminals Mechanical mounting supports for chassis, DIN-rail and PCB mounting NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of Power-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. MAR 25, 2004 revised to JUL 27, 2006 Page 5 of 5 www.power-one.com