JKXPC1G05MCSDSR - Souriau - Datasheet.Live

JKX Series

• Sealed IP 68 (mated connectors)

• Mechanically keyed : ensures correct polarization

and alignment.

• Contact arrangements : from 2 to 10 contacts.

• Wire gauge range from 28 AWG to 14 AWG.

• High contact density in a small space.

• Contact termination in either crimp, solder or

PCB contacts.

Part number system

MS D SC

M05G1

JKX

Basic series

Shell configuration FD - ER - EP - PC

Size 0 - 1

Keying G

Contact layouts 02 ---------- 10 (see page 33)

Contact type M: pin F: socket (in relation with keying)

Contact termination C: crimp ; S: solder ; P* : straight PCB tails ; Q* : 90° PCB tails ; W: 0.7 mm clipped

solder

Material & surface plating S: Outer shell in brass alloy with glossy chrome over nickel

N: Outer shell in brass alloy with black plating (consult us)

D: Obligatory suffix

S: Insulator in PPS

P: Insulator in Peek (for Ø 0.5 mm contacts only)

Obligatory suffix for layouts including contacts of Ø 0.5 mm

Options M: Connector with backnut for protective boot (protective boot to order separately page 34)

G: Connector adapted to accomodate larger cables (Ø 4.5 to 6 in size 0 and Ø 6 to 8 in size 1)

R: Red dot (possible for FD, PC, ER only)

* For receptacles with female contacts only.

Key features

User advantages

Temporary immersion IP 68

6-collet cluster

Allows a wide range of cable diameter

applications for a single connector.

Reduces inventory variations.

Removable contacts

Crimp versions allow easier wiring and

maintenance.

JKX Series

Shell type

• Available JKX shells

• Dimensions

FD : Straight plug with cable clamping

Size

Ø B

Ø M

1.5 to 4.5

2 to 6

ER : Fixed receptacle, front panel mounting

Size

19.5

24.5

4.5

8.5

4.5

Ø D

EP : Fixed receptacle, back panel mounting

Size

19.5

24.5

4.5

3.2

Ø D

PC : Cable mounted receptacle

• Option G : to accomodate bigger cables Size

ØB

Ø M

4.6 to 6

6 to 8

Size

Ø B

Ø C

2 to 6

JKX Series

Keying

Contacts

• Multi contacts inserts

G keying is available in standard version (0°

keying angle, plugs with pin contacts,

receptacles with female contacts) for the 4

shell types. Reverse gender available in all

layouts.

Shell size Key ER EP PC FD

0G●●_●

1G●●●●

● Concerning the availability of other alternatives, please consult our commercial office.

Male AWG Max. Testing Working

Shell insulator Contact S C P* Q* ØSolder Crimp current voltage voltage

size viewed from layout solder crimp straight 90° Contact wire wire rating (Vdc /

wiring side PCB tails PCB tails Max. Max. (A) (Vrms) Vrms)

02 S C P Q 0.9 24 20 10 1400 660/460

03 S C P Q 0.9 24 20 8 1300 600/420

04 S C P Q 0.7 26 22 7 1400 660/460

05 S C P Q 0.7 26 22 6.5 800 400/260

06 S P 0.5 28 - 2.5 680 320/220

07 S P 0.5 28 - 2.5 680 320/220

02 S C P 1.3 20 18 15 1600 760/530

03 S C P Q 1.3 20 18 12 1300 600/420

04 S C P Q 0.9 24 20 10 1900 900/630

05 S C P Q 0.9 24 20 9 1400 660/460

06 S C P Q 0.7 26 22 7 1400 660/460

07 S C P Q 0.7 26 22 7 1400 660/460

08 S C P Q 0.7 26 22 5 1200 600/420

10 S P 0.5 28 - 2.5 600 300/200

Inserts with fixed contacts (non removable contacts) * For receptacles with female contacts only

Available Contact types

JKX Series

Options

• Protective boot

Protective boot can accept multiple cable diameters

• Caps : an efficient protection until 2 bars

With each JKX connector, one protective boot can accept diverse cable diameters thus the end-user can manage various cable

diameters without bothering with multiple part numbers.

Material :

ELASTOLLAN (PUR)

Working temperature :

- 40°C ; + 80°C

- 40°F ; + 176°F

Dimensions

Part Shell Shell size

number size Option Ø AL Ø Câble

Gmin Max.

JBX 0 MP* 0 - 2.2 20 1.5 5.5

JBX 1 MP* 1 0 2.6 25 2 7.5

JBX 2 MP* - 1 4 30 3.5 9.7

Color code Colors

A blue

B white

G grey

J yellow

M brown

N black

R red

V green

O orange

* Color code

Part number Ø

JKX BR0 15

JKX BR1 17

JKX Series

Technical characteristics

• Material and treatment

• Mechanical and climatics

Component Material Standard Surface treatment (µm)

ISO ASTM Cr Ni Au

Outer shell and collet nut Brass CuZn40Pb3 C38500/C360 0.1 - 0.6 5 - 8 -

Latching sleeve & metal collet Brass CuZn40Pb3 C38500/C360 - 5 - 8 -

Shielding ring Brass CuZn40Pb3 C38500/C360 - 3 - 7 -

Nut Brass CuZn40Pb3 C38500/C360 5 - 8 -

Tapered washer and half bushes Brass CuZn40Pb3 C38500/C360 - 5 - 8 -

Socket contact (1) Copper-nickel CuNi1Pb1P CDA C 19150 - 3 - 5 0.5

Pin contact (1) Brass CuZn35Pb2 C35300/C360 - 3 - 5 0.5

Clip Beryllium copper CuBe1,9 C17200/C360 - - -

Component Material Color Temperature withstanding

Insert PPS + 40%GF black - 65°C + 200°C - 85°F + 392°F

or PEEK + 15%GF brown - 50°C + 250°C - 58°F + 482°F

Plastic collet PA 6/6 + MoS2 black - 55°C + 125°C - 67°F + 257°F

Cable seal Silicon rubber red - 50°C + 250°C - 58°F + 482°F

Characteristics Values Standard Method

Endurance > 1000 cycles (except for 0.7 mm crimp contacts for which MIL-STD 2016.1

endurance is limited to 500 cycles) 1344A

Shock 50 g, duration 6 ms ; contact Ø0.7 mm and 0.9 mm MIL-STD 2004.1

100 g, duration 6 ms ; contact Ø1.3 mm - 1.6 mm and 2 mm 1344A

Vibrations 10 to 2000 Hz γ= 15 g, contact Ø0.7 mm and 0.9 mm MIL-STD 2005.1

γ= 20 g, contact Ø1.3 mm - 1.6 mm and 2 mm 1344A

Protection index IP 68 (watertight - 48 hours under 1 m of water) CEI 529

- 55°C + 125°C

with plastic collets - 67°F + 257°F --

Operating temperature

with optional metal collets - 55°C + 200°C

- 67°F + 392°F - -

(1) Gold thickness as per MIL-G-45204C type 1, class 00.

}

JKX Series

Wiring and assembly instructions

• Panel cutout

• Removable contacts

Crimp contacts

Solder contacts

Contact Usable cables Max. Contact Endurance

Core section (mm

)current resistance (number

Ø CØ F AWG rating (A) (mΩ) of cycles)

min Max.

0.7 0.85 0.129 0.326

22 - 24 - 26

7 5 500 Max.

0.9 1.1 0.205 0.518

20 - 22 - 24

10 3.5 > 1000

1.3 1.4 0.326 0.823

18 - 20 - 22

15 3 > 1000

Contact Usable cables Max. Contact Endurance

Core section (mm

)current resistance (number

Ø CØ F AWG rating (A) (mΩ) of cycles)

min Max.

0.9 0.8

0.21 24 10 3.5 > 1000

1.3 1.1

0.60 20 15 3 > 1000

The conductor bucket on the solder contacts is designed with an angle to form a cup into which the solder can flow easily.

• Fixed contacts

Solder contacts

Contact Usable cables Max. Contact Endurance

Shell

Core section

current resistance (number

F size

(mm2) Max.

AWG rating (A) (m

Ω

) of cycles)

0.5 0.5 0 - 1 0.096 28 5 10 > 1000

0.7 0.63 0 - 1 0.15 26 7 5 > 1000

Contacts for PCB

Size 0 1

Ø A 14.1 16.1

B12.6 14.6

Contacts for PCB Contact length dimensions “L”

PCB tail length size 0 dimension “L” 5.5 mm

0.7 mm female PCB tail length size 0 dimension “L” 3.5 mm

0.7 mm female PCB tail length size 1 dimension “L” 4.0 mm

0.9 mm female PCB tail length size 0 dimension “L” 3.5 mm

0.9 mm female PCB tail length size 1 dimension “L” 4.0 mm

1.3 mm female PCB tail length size 1 dimension “L” 4.0 mm, dimension “F” 0.7 mm

+0.2

–0

ø+0.3

+0.1

0.7 1.0

0.3 22 7 5 500 Max.

JKX Series

≤1.35

> 1.35

≤1.6

> 1.6

≤1.35

> 1.35

≤1.6

> 1.6

≤2.1

> 2.1

Wiring and assembly instructions

• Cable stripping for connectors with crimp contacts

• Cable stripping for connectors with solder contacts

Stripping for FD / PC

LCT

0.7 15 7

0.9 15 7

0.7 17 8

10.9 17 8

1.3 17 8

Shell size Ø Contacts Ø I

Shell size Ø Contacts

5.5

Stripping for FD / PC

LST

0.5 11 2 7

0.7 12 3 7

0.9 12 3 7

0.5 13 2 8

0.7 14 3 8

0.9 14 3 8

1.3 14 3.5 8

ØI : diameter over insulation

➀:O’ring for sealing between receptacle and plug shell

➁:O’ring for sealing between receptacle and panel

➂:O’ring for sealing between plug body and backshell

➃:seals to accomodate variety of cable diameters

Fixed receptacle Straight plug

• Watertightness design (mated connectors)

JKX Series

• Connector preparation

1 - Select the proper collet ➃and the cable

seal ➂ (see page 39).

2 - Slide protective boot ➅, the backnut ➄, the

collet ➃, the cable seal ➂, the outershell ➁

and the taper seat ➀onto the cable.

Strip end

of cable (see pg. 16)

• Contacts wiring : crimp contacts

1 - Select the proper crimping tool (see page 48)

2 - Adjust the crimping tool based on the wire

size “AWG”. (See wire size and crimp tool

settings on the back of this locator.)

3 - Crimp the contacts ➃then insert the contact

into the insulator until the clip is fully seated

and cannot be removed.

• Contacts wiring : solder contacts

Fixed solder contacts 0.5 mm and 0.7 mm Removable solder contacts from 0.9 mm to 1.3 mm

1 - Insert wire into solder cup and solder 1 - Insert wire into solder cup and solder

2 - Insert the contact into the insulator until the clip is fully seated and cannot be removed.

• Connector assembly

1 - In case of shielded cable, comb out the shield

and fold back over the tapper seat

➀

2 - Position 2 half bushes

➈

, making sure that the

insert key appears through the windows of one

bush.

3 - Position the taper seat

➀

on the half bushes

➈

4 - Position all the sub-assembly in connector

housing

➉

, making sure to keep the sub-

assembly well aligned.

5 - Screw the outershell

➁

following the torque

values on page 39. Install the cable seal

➂

and

the collet

➃

into the outershell

➁

then screw

the backnut

➄

till bottoming. Use 2 wrenches

well positionned on the flats A and B. Place a

wrench to grip flats B, use the other wrench to

tighten the backnut at the flats A following the

torque values on page 39.

6 - Install the protective boot

➅

if applicable.

Wiring and assembly

instructions :

STRAIGHT PLUG

• Cable stripping : see page 37

JKX Series

• Collets selection according to cable diameters

3 or 5 collets per shell size allow a wide range of cable diameters for a single connector. Cable out diameters are for information

only, since values will change with each cable construction.

Cable diameter

Shell size 0 Size 0, option G Shell size 1 Size 1, option G

1 1.5 - 2.5 - 2- 2.5 -

22.6 - 3.5 - 2.6 - 3.5 -

33.6 - 4.5 - 3.6 - 4.5 6.1 - 6.7

4-4.6 - 5.5 4.6 - 5.5 6.8 - 7.7

5- 5.6 - 65.6 - 67.8 - 8

Collet number 4 in shell size 0 and collet number 6 in shell size 1 are not used.

Discreet application based on cable diameter

• Cable seal selections according to cable size

Collet number

Cable diameter

Shell size 0 Size 0, option G Shell size 1 Size 1, option G

21.5 - 2.9

3.5 3 - 4.5

2.5 2 - 3.4 -

44.6 - 4.9 3.5 - 4.9 -

5.5 5 - 6 5 - 6 6.1 - 6.4

76.5 - 8

Cable gland

Ø A

Advised torque* in Nm

(option G) 11

(option G)

1.6 / 1.8 /

1.5 2.5

0.8 1

Size

14 x 1 16 x 1

(option G) 11

(option G)

813

10 11 12 14

Size

Tools

(jaw dimensions)

Wiring and assembly instructions

• Coupling torques Tool dimensions

Torque values are the maximum allowable for each connector size.

Torque values will vary due to the type and size of the cable used

*Apply thread lock to back nut prior to assembly.

Tool numbers can be found on page 32

• Shielding

Tested according to MIL-STD 1344 A, method 3007

Shell size

Ø A

Electrical

continuity (mΩ)

JKX Series

JBX Series

sealed version size 2

Key features

• Sealed IP 67 (mated connectors)(FE, EC, SE, & PC)

• Watertight receptacles IP68 (HC & HH)

• Mechanically keyed : ensure correct polarisation and

alignment.

• Contact arrangements : from 2 to 19 contacts.

• Wire gauge range from 26 AWG to 12 AWG.

• High contact density in a small space.

• Contact termination in either crimp, solder or PCB

contacts.

Part number system

RS D SC

M12G2

JBX

Basic series

Shell type FE-HH-HC-EC-PE-SE

Shell size 2

Keying G

Contact layouts 02 ---------- 19

Contact type M: pin F: socket (in relation with keying)

Contact termination C: crimp ; S: solder ; P* : straight PCB tails ; Q* : 90° PCB tails

Material & surface plating S: Outer shell in brass alloy with chrome over nickel

N: Outer shell in brass alloy with black plating (consult us)

D: Obligatory suffix

S: Obligatory suffix

Option R: FE, PE, HH, & HC N/A for EC & SE

* For receptacles with female contacts only.

User advantages

Wet environment IP67

6-collet cluster

Allows a wide range of cable diameter

applications for a single connector.

Reduces inventory variations.

Removable contacts

(EC, FE, SE & PE)

Crimp versions allow easier wiring and

maintenance.