Preliminary For prototype or pre-production sample please contact RFM Sales. SF2067B (R) * * * * Low Insertion Loss 5.0 X 7.0 mm Surface-Mount Case 50 Single Ended Input 200 Balanced Output Complies with Directive 2002/95/EC (RoHS) 172.8 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC -40 to +85 C Storage Temperature Range Max Soldering Temperature SMP-03 265C for 10 s Electrical Characteristics Characteristic Nominal Frequency Minimum Insertion Attenuation Amplitude Ripple (p-p) Group Delay Ripple (p-p) Group Delay VSWR Phase Ripple (p-p) Pass Bandwidth Adjacent Channel Selectivity Relative Attenuation (relative to min) fN 4.42 MHz fN 4.42 MHz @ fN fN 4.42 MHz fN 4.42 MHz rel 1.5 dB fN 8.0 to fN 11.0 MHz fN 11 to fN 25.0 MHz fN 25 to fN 36.8 MHz fN 36.8 to fN 100.0 MHz Operating Temperature Range Case Style Lid Symbolization (YY=year, WW=week, S=shift) See note 4 Sym fN min Notes 1 1 1 B1.5dB ACS rel TA Min 1 5 8.84 17 27 35 45 55 -40 Typ 172.8 10.6 0.8 70 780 1.3:1 10 9.2 22 32 45 60 70 Max 12.5 1.5 200 1000 +85 SMP-03 7 x 5 mm Nominal Footprint RFM SF2067B YYWWS Units MHz dB ns MHz dB dB dB dB dB C Electrical Connections Connection Port 1 Hot Port 1 Ground Return Port 2 Hot Port 2 Hot Case Ground Terminals 10 1 5 6 All Others Notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. Tape and Reel Standard Per ANSI / EIA 481. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. (c)Copyright 1999, RF Monolithics Inc. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2067B-042905 Page 1 of 6 172.8 MHz SAW Filter 20 Apr 2005 14:02:32 CH1 S21 DEL 20 ns/ REF 720 ns 3 : -24 . 781 ns 8 . 840 000 MHz sf2067B 1 dB BW and GDD CH1 Smo mean C Markers REF=2 : 715 . 30 ns s . dev : 7 . 8012 ns p-p : 48 . 955 ns PRm 3 2 1 CH1 CH2 CENTER S21 LOG 172 . 800 000 10 dB/ MHz SPAN 1 : 0 . 0000 REF -11.93 dB 9 . 000 dB 000 0 . 000 MHz 000 MHz 1 3 2 CH2 Max 4 BW : Cor cent : Markers REF=1 9 . 007195 MHz 173 . 060150 MHz Q: 19 . 214 PRm 1_ loss CH2 CENTER 172 . 800 000 MHz SPAN 60 . 000 000 : -11 . 896 dB MHz 20 Apr 2005 14:25:32 CH1 S21 LOG 10 dB/ REF -12.17 dB 1 : . 00500 dB 0 . 000 000 MHz CH1 PASS sf2067b rejection PRm CH1 Markers REF= Max 9 . 010059 MHz BW : 1 Cor cent 3 2 : 173 . 060621 4 1_ loss CENTER 172 . 800 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. MHz Q: 19 . 207 SPAN 60 . 000 000 : -11 . 901 dB MHz E-mail: info@rfm.com http://www.rfm.com SF2067B-042905 Page 2 of 6 172.8 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2067B-042905 Page 3 of 6 172.8 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2067B-042905 Page 4 of 6 172.8 MHz SAW Filter SMP-03 Case 10-Terminal Ceramic Surface-Mount Case 7 x 5 mm Nominal Footprint Case Dimensions Dimension A B C D E H J K P Recommended PCB Footprint Min 6.80 4.80 1.50 .47 2.41 0.87 4.87 2.87 1.14 mm Nom 7.00 5.00 1.65 0.60 2.54 1.0 5.00 3.00 1.27 Max 7.20 5.20 2.00 .73 2.67 1.13 5.13 3.13 1.40 Min 0.268 0.189 0.059 0.019 0.095 0.034 0.192 0.113 0.045 Inches Nom 0.276 0.197 0.065 0.024 0.100 0.039 0.197 0.118 0.050 Max 0.283 0.205 0.079 0.029 0.105 0.044 0.202 0.123 0.055 Materials Solder Pad Termination Au plating 30 - 60 inches (76.2-152 m) over 80200 inches (203-508 m) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 inches Thick Body Al2O3 Ceramic Pb Free Electrical Connections Connection Port 1 Port 2 Terminals Input or Return 10 Return or Input 1 Output or Return 5 Return or Output 6 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot C B E H H A J D P K RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2067B-042905 Page 5 of 6 172.8 MHz SAW Filter Tape and Reel Specifications 100 REF. "B" REF. "B " Nominal Size Quantity Per Reel Inches millimeters 7 178 500 13 330 2000 See Detail "A" 13. 0 12.0 16.0 .2 20 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 5.5 mm Bo 7.5 mm Ko 2.0 mm Pitch 8.0 mm W 16.0 mm PIN #1 USER DIRECTION OF FEED RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2067B-042905 Page 6 of 6