CPH3106 Ordering number : EN6005B SANYO Semiconductors DATA SHEET CPH3106 PNP Epitaxial Planar Silicon Transistor DC / DC Converter Applications Applications * Relay drivers, lamp drivers, motor drivers, flash Features * * * * * * Adoption of MBIT processes High current capacitance Low collector-to-emitter saturation voltage High-speed switching Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) High allowable power dissipation Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current (Pulse) VEBO IC ICP Base Current IB Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg Collector Current --15 V --12 V --5 V --3 A --5 --600 Mounted on a ceramic board (600mm2x0.8mm) 0.9 W 150 C --55 to +150 C Package Dimensions Product & Package Information unit : mm (typ) 7015A-003 * Package : CPH3 * JEITA, JEDEC : SC-59, TO-236, SOT-23 * Minimum Packing Quantity : 3,000 pcs./reel CPH3106-TL-E 0.6 2.9 0.15 Packing Type: TL Marking 0.05 LOT No. 0.2 AF 3 1.6 2.8 A mA 0.9 0.2 0.6 TL 1 0.95 2 0.4 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 Electrical Connection 3 1 2 http://semicon.sanyo.com/en/network 62012 TKIM/N1504 TSIM TB-00000316/61899TS (KOTO) TA-1493 No.6005-1/7 CPH3106 Electrical Characteristics at Ta=25C Parameter Symbol Collector Cutoff Current ICBO IEBO hFE Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product fT Cob Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO Conditions Ratings min typ max VCB= --12V, IE=0A VEB= --4V, IC=0A VCE= --2V, IC= --500mA VCE= --2V, IC= --500mA 200 --0.1 A --0.1 A 560 280 VCB= --10V, f=1MHz IC= --1.5A, IB= --30mA MHz 36 IC= --1.5A, IB= --30mA IC= --10A, IE=0A IC= --1mA, RBE= IE= --10A, IC=0A tstg tf See specified Test Circuit. pF --110 --165 mV --0.85 --1.2 mV --15 V(BR)EBO ton Unit V --12 V --5 V 30 ns 90 ns 10 ns Switching Time Test Circuit IB1 PW=20s D.C.1% IB2 OUTPUT INPUT 1k RL VR 50 + + 220F 470F VBE=5V VCC= --5V --20IB1=20IB2=IC= --1.5A Ordering Information Device CPH3106-TL-E Package Shipping memo CPH3 3,000pcs./reel Pb Free No.6005-2/7 CPH3106 IC -- VCE Collector Current, IC -- A --1.8 IC -- VCE --200 mA --14 --12mA --10mA --1.6 --8mA --1.4 --1.2 --6mA --1.0 --4mA --0.8 --0.6 --2mA --0.4 --0.8mA --180 Collector Current, IC -- mA --1 6m A --2.0 --0.7mA --160 --0.6mA --140 --0.5mA --120 --0.4mA --100 --80 --0.3mA --60 --0.2mA --40 --0.1mA --20 --0.2 IB=0 0 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE -- V 0 --1 --2 --3 --4 -5 Collector-to-Emitter Voltage, VCE -- V IT07987 IC -- VBE --3.5 IB=0 0 --1.0 hFE -- IC 1000 VCE= --2V IT07988 VCE= --2V 7 5 DC Current Gain, hFE Collector Current, IC -- A --3.0 --2.5 --2.0 --1.5 --1.0 2 100 7 5 --0.5 3 --0.01 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V 2 --1.2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT07990 Collector Current, IC -- A IT07989 VCE(sat) -- IC VCE(sat) -- IC 5 IC / IB=20 IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 3 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 3 --0.1 7 5 3 2 --0.01 7 3 2 --0.1 7 5 3 2 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 --0.01 --0.01 5 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A VBE(sat) -- IC 3 2 IT07991 5 Cob -- VCB 3 IC / IB=50 3 IT07992 f=1MHz 2 Output Capacitance, Cob -- pF Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 --1.0 7 5 100 7 5 3 2 3 10 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 IT07993 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Base Voltage, VCB -- V 3 5 IT07994 No.6005-3/7 CPH3106 f T -- IC 5 3 2 100 7 --1.0 7 5 5 7 --0.1 2 3 5 7 --1.0 2 3 5 IT07995 PC -- Ta 1.0 1m DC s s 0m s op era tio n 3 2 3 Collector Current, IC -- A 0 s 10 3 2 3 50 10m IC= --3A 2 5 2 ICP= --5A 3 --0.1 7 5 7 --0.01 ASO --10 7 5 VCE= --2V Collector Current, IC -- A Gain-Bandwidth Product, fT -- MHz 7 Ta=25C Single pulse Mounted on a ceramic board (600mm20.8mm) 2 3 5 7 --1.0 2 3 5 7 --10 Collector-to-Emitter Voltage, VCE -- V 2 IT07996 Collector Dissipation, PC -- W 0.9 M ou 0.8 nt ed on ac er 0.6 am ic bo ar d (6 00 0.4 m m2 0. 8m m 0.2 ) 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT07997 No.6005-4/7 CPH3106 Embossed Taping Specification CPH3106-TL-E No.6005-5/7 CPH3106 Outline Drawing CPH3106-TL-E Land Pattern Example Mass (g) Unit 0.013 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No.6005-6/7 CPH3106 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No.6005-7/7