CPH3106-TL-E - ON Semiconductor

CPH3106

No.6005-1/7

Applications

• Relay drivers, lamp drivers, motor drivers, ﬂ ash

Features

• Adoption of MBIT processes

• High current capacitance

• Low collector-to-emitter saturation voltage

• High-speed switching

• Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm)

• High allowable power dissipation

Speciﬁ cations

Absolute Maximum Ratings at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Collector-to-Base Voltage VCBO --15 V

Collector-to-Emitter Voltage VCEO --12 V

Emitter-to-Base Voltage VEBO --5 V

Collector Current IC--3 A

Collector Current (Pulse) ICP --5 A

Base Current IB--600 mA

Collector Dissipation PC

Mounted on a ceramic board (600mm

×0.8mm)

0.9 W

Junction Temperature Tj 150 °C

Storage Temperature Tstg --55 to +150 °C

Package Dimensions

unit : mm (typ)

7015A-003

Ordering number : EN6005B

62012 TKIM/N1504 TSIM TB-00000316/61899TS (KOTO) TA-1493

SANYO Semiconductors

DATA SHEET

CPH3106

PNP Epitaxial Planar Silicon Transistor

DC / DC Converter Applications

http://semicon.sanyo.com/en/network

Product & Package Information

• Package : CPH3

• JEITA, JEDEC : SC-59, TO-236, SOT-23

• Minimum Packing Quantity : 3,000 pcs./reel

Packing Type: TL Marking

Electrical Connection

LOT No.

CPH3106-TL-E

1 : Base

2 : Emitter

3 : Collector

SANYO : CPH3

2.9

0.05

0.4

2.8

1.6

0.2

0.6 0.6

0.9

0.2

0.15

0.95

CPH3106

No.6005-2/7

Electrical Characteristics at Ta=25°C

Parameter Symbol Conditions Ratings Unit

min typ max

Collector Cutoff Current ICBO VCB= --12V, IE=0A --0.1 μA

Emitter Cutoff Current IEBO VEB= --4V, IC=0A --0.1 μA

DC Current Gain hFE VCE= --2V, IC= --500mA 200 560

Gain-Bandwidth Product fTVCE= --2V, IC= --500mA 280 MHz

Output Capacitance Cob VCB= --10V, f=1MHz 36 pF

Collector-to-Emitter Saturation Voltage VCE(sat) IC= --1.5A, IB= --30mA --110 --165 mV

Base-to-Emitter Saturation Voltage VBE(sat) IC= --1.5A, IB= --30mA --0.85 --1.2 mV

Collector-to-Base Breakdown Voltage V(BR)CBO IC= --10μA, IE=0A --15 V

Collector-to-Emitter Breakdown Voltage V(BR)CEO IC= --1mA, RBE=∞ --12 V

Emitter-to-Base Breakdown Voltage V(BR)EBO IE= --10μA, IC=0A --5 V

Turn-On Time ton See speciﬁ ed Test Circuit. 30 ns

Storage Time tstg 90 ns

Fall Time tf10 ns

Switching Time Test Circuit

Ordering Information

Device Package Shipping memo

CPH3106-TL-E CPH3 3,000pcs./reel Pb Free

IB2

IB1

INPUT

50Ω

1kΩRL

OUTPUT

VBE=5V VCC= --5V

--20IB1=20IB2=IC= --1.5A

220μF 470μF

PW=20μs

D.C.≤1%

CPH3106

No.6005-3/7

IC -- VCE IC -- VCE

IT07987 IT07988

hFE -- IC

IT07990

IC -- VBE

IT07989

00 --0.2 --0.4 --0.6 --0.8 --1.0

--0.2

--0.4

--0.6

--0.8

--1.2

--1.4

--1.6

--1.8

--2.0

--1.0

0 --1 --2 --3 --4 -5

--20

--40

--60

--80

--120

--140

--160

--180

--200

--100

VCE= --2V

00 --0.2 --0.4 --0.6 --1.2--1.0--0.8

--0.5

--1.0

--1.5

--2.0

--3.5

--3.0

--2.5

VCE= --2V

--0.01 --0.1 --1.0 --10

100

1000

23 57 23 57 23 57

Collector Current, IC -- A

Collector-to-Emitter Voltage, VCE -- V

Collector Current, IC -- mA

Collector-to-Emitter Voltage, VCE -- V

Collector Current, IC -- A

Base-to-Emitter Voltage, VBE -- V Collector Current, IC -- A

DC Current Gain, hFE

IB=0 IB=0

--2mA

--0.1mA

--0.2mA

--0.3mA

--0.4mA

--0.5mA

--0.6mA

--0.7mA

--0.8mA

--4mA

--6mA

--8mA

--10mA

--12mA

--16mA

--14mA

VBE(sat) -- IC

IT07993 IT07994

VCE(sat) -- IC

IT07991

VCE(sat) -- IC

IT07992

--0.1 --1.0 523 57 23 57 23

IC / IB=20

--0.01

--0.1

--0.01

--0.1 --1.0 5222357 357 3

--0.01

--0.1

--0.01

IC / IB=50

--1.0

--0.01 --1.0 5

--0.1

23 57 23 57 23

f=1MHz

100

--1.0 --10--0.1 23 57 23 57 23 5

Cob -- VCB

Collector Current, IC -- A

Base-to-Emitter

Saturation Voltage, VBE(sat) -- V

Output Capacitance, Cob -- pF

Collector-to-Base Voltage, VCB -- V

Collector Current, IC -- A

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- V

Collector Current, IC -- A

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- V

IC / IB=50

CPH3106

No.6005-4/7

A S O

1.0

0.9

0.8

0.6

0.4

0.2

00 20 40 60 80 100 120 140 160

PC -- Ta

--10

--1.0

--0.1

2357 23572--1.0 --10 2

IT07996

IT07997

IT07995

fT -- ICVCE= --2V

735723 57 3

100

--1.0 5

--0.01 --0.1

100ms

DC operation

500μs

10ms

1ms

ICP= --5A

IC= --3A

Gain-Bandwidth Product, fT -- MHz

Collector Current, IC -- A Collector-to-Emitter Voltage, VCE -- V

Collector Current, IC -- A

Ta=25°C

Single pulse

Mounted on a ceramic board (600mm2✕0.8mm)

Ambient Temperature, Ta -- °C

Collector Dissipation, PC -- W

Mounted on a ceramic board (600mm2✕0.8mm)

CPH3106

No.6005-5/7

Embossed Taping Speciﬁ cation

CPH3106-TL-E

CPH3106

No.6005-6/7

Outline Drawing Land Pattern Example

CPH3106-TL-E

Mass (g) Unit

0.013

* For reference

mm Unit: mm

0.6

2.4

0.95 0.95

1.4

CPH3106

PS No.6005-7/7

This catalog provides information as of June, 2012. Speciﬁ cations and information herein are subject

to change without notice.

Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to

"standard application", intended for the use as general electronics equipment. The products mentioned herein

shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,

aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal

system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten

human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they

grant any guarantee thereof. If you should intend to use our products for new introduction or other application

different from current conditions on the usage of automotive device, communication device, office equipment,

industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.)

prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be

solely responsible for the use.

Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate

the performance, characteristics, and functions of the described products in the independent state, and are

not guarantees of the performance, characteristics, and functions of the described products as mounted in the

customer's products or equipment. To verify symptoms and states that cannot be evaluated in an

independent device, the customer should always evaluate and test devices mounted in the customer's

products or equipment.

SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using

products at values that exceed, even momentarily, rated values (such as maximum ratings, operating

condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor

Co.,Ltd. products described or contained herein.

Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature,

high current, high voltage, or drastic temperature change, even if it is used within the range of absolute

maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a

confirmation.

SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all

semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures

or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give

rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,

adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but

are not limited to protective circuits and error prevention circuits for safe design, redundant design, and

structural design.

In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are

controlled under any of applicable local export control laws and regulations, such products may require the

export license from the authorities concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system, or

otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the

SANYO Semiconductor Co.,Ltd. product that you intend to use.

Upon using the technical information or products described herein, neither warranty nor license shall be

granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any

third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third

party's intellectual property rights which has resulted from the use of the technical information and products

mentioned above.