ALUMINUM ELECTROLYTIC CAPACITORS ZR 3.95mmL MAX. Chip Type series ZS Chip type with 3.95mmLMAX height. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). Smaller ZR Smaller ZD Specifications Item Performance Characteristics Category Temperature Range -40 to +85C Rated Voltage Range 4 to 50V Rated Capacitance Range 0.1 to 220F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (A) , whichever is greater. Rated voltage (V) 4 6.3 10 16 25 35 50 0.50 0.30 0.24 0.19 0.16 0.14 0.14 Rated voltage (V) 4 6.3 10 16 25 35 50 Temperature Impedance ratio Z-25C / Z+20C ZT / Z20 (MAX.) Z-40C / Z+20C 7 4 3 2 2 2 2 15 8 8 4 4 3 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 85C. Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Resistance to soldering heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20C. Marking Black print on the case top. Tangent of loss angle (tan ) tan ( MAX.) Stability at Low Chip Type Capacitance change tan Leakage current E +0.05 -0.2 3.90 Negative 0.5 to 0.8 Voltage V 4 6.3 10 16 25 35 50 Code g j A C E V H 1 A0.3 Capacitance Within 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Within 10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value 2 3 4 5 6 7 8 9 10 11 12 13 14 U Z R 1 C 1 0 0 MC L 1 GB Taping code A0.3 C0.2 B0.2 D0.5 A2 10C ZR 0.5 MAX. Plastic platform 0.3 MAX. Series Lot No. 120Hz Type numbering system (Example : 16V 10F) Positive Voltage (C : 16V) 120Hz 20C 4 1.8 4.3 4.3 1.0 D A B C E 5 2.1 5.3 5.3 1.3 Configuration (mm) 6.3 2.4 6.6 6.6 2.2 Capacitance tolerance (20%) Rated capacitance (10F) Rated voltage (16V) Series name Type Dimensions 4 0G V Cap. (F) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 4 4 5 6.3 6.3 0J 28 33 56 96 4 5 5 6.3 10 1A 28 37 45 70 5 5 6.3 16 1C 33 41 52 4 5 6.3 6.3 25 1E 23 37 49 58 4 5 6.3 6.3 35 1V 16 27 42 52 4 5 6.3 50 1H 18 29 46 4 4 4 4 4 4 4 5 6.3 Case size D (mm) 1.0 2.0 2.8 4.0 8.4 13 17 20 33 Rated ripple Rated ripple current (mArms) at 85C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Taping specifications are given in page 23. Recommended land size soldering by reflow are given in page 18,19. Please refer to page 3 for the minimum order quantity. CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UZR0J330MCR1GB UZR1C100MCL1GB UZR1E330MCL1GB UZR0G330MCL1GB UZR0G470MCL1GB UZR0G101MCL1GB UZR0G221MCL1GB UZR0J220MCL1GB UZR0J330MCL1GB UZR0J470MCL1GB UZR0J101MCL1GB UZR1A220MCL1GB UZR1A330MCL1GB UZR1A470MCL1GB UZR1C220MCL1GB UZR1C330MCL1GB UZR1C470MCL1GB UZR1E4R7MCL1GB UZR1E220MCL1GB UZR1V4R7MCL1GB UZR1V220MCL1GB UZR1H0R1MCL1GB UZR1HR22MCL1GB UZR1HR33MCL1GB UZR1HR47MCL1GB UZR1H010MCL1GB UZR1H2R2MCL1GB UZR1H3R3MCL1GB UZR1H4R7MCL1GB UZR1H100MCL1GB UZR1V100MCL1GB UZR1E100MCL1GB