DB LECTRO Inc. P6SMB SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 TO 170 Volts 600Watts Peak Pulse Power P6SMB PART NUMBER P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB P6SMB 6.8A 7.5A 8.2A 9.1A 10A 11A 12A 13A 15A 16A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A REVERSE BREAKDOWN BREAKDOWN TEST MAXIMUM PEAK REVERSE VOLTAGE CURRENT CLAMPING STANDVOLTAGE PULSE LEAKAGE VBR(V) OFF VBR(V) IT (mA) VOLTAGE CURRENT @ VRWM VOLTAGE @Ipp Vc(V) Ipp (A) IR( A) MIN.@IT MAX.@IT BI(V) V RWM POLAR MARKING CODE UNIPOLAR 6V8A 7V5A 8V2A 9V1A 10A 11A 12A 13A 15A 16A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A 6V8C 7V5C 8V2C 9V1C 10C 11C 12C 13C 15C 16C 18C 20C 22C 24C 27C 30C 33C 36C 39C 43C 47C 51C 56C 62C 68C 75C 82C 91C 100C 110C 120C 130C 150C 160C 170C 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 7.14 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.5 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 57.1 53.1 49.6 44.8 41.4 38.5 35.9 33.0 28.3 26.7 23.8 21.7 19.6 18.1 16.0 14.5 13.1 12.0 11.1 10.1 9.3 8.6 7.8 7.1 6.5 5.8 5.3 4.8 4.4 3.9 3.6 3.4 2.9 2.7 2.6 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 DBP6SMB LECTRO Inc. SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 TO 170 Volts 600 Watt Peak Pulse Power FEATURES For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability Repetition Rate(duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to BV for unidirectional types Typical IR less than 1mA above 10V High temperature soldering: 250C/10 seconds at terminals Dimensions in inches and (millimeters) MECHANICAL DATA Case JEDEC DO214AA. Molded plastic over glass passivated junction Terminal Polarity Solder plated, solderable per MIL-STD-750, Method 2026 Color band denotes positive end (cathode) except Bidirectional Standard Packaging 12mm tape(EIA STD RS-481) Weight 0.003ounce, 0.093gram DEVICES FOR BIPOLAR APPLICATION For Bidirectional use Suffix CA for types P6SMB6.8CA thru types P6SMB170CA Electrical characteristics apply in both directions MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL VALUE UNITS Minimum PPPM Peak Pulse Power Dissipation on 10/1000 s waveform (Note 1,FIG.1) Watts 600 SEE IPPM Peak Pulse Current of on 10/1000 s waveform (Note 1,FIG.3) Amps TABLE 1 Peak Forward Surge Current,8.3ms Single Half Sine-Wave IFSM 100 Amps Superimposed on Rated Load,(JEDEC Method) (Note 3) -55 to + TJ , TSTG Operating junction and Storage Temperature Range 150 Notes : 1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25 per Fig. 2 . 2 2.Mounted on 5.0mm (0.03mm thick) Copper Pads to each terminal 3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. RATING DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 DB LECTRO Inc. P6SMB SERIES RATINGS AND CHARACTERISTIC CURVES Ratings and Characteristic Curves(TA=25 unless otherwise noted) Fig.2 - Pulse Derating Curve Fig. 1 - Peak Pulse Power Rating Curve 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% PppM-Peak Pulse Power (kW) 100 10 1 0.2x0.2"(5.0x5.0mm) Copper Pad Areas 0.1 0.1s 1.0s 10s 100s 1.0ms 87.5 75 62.5 50 37.5 25 12.5 0 0 10ms td - Pulse Width (sec.) 75 100 125 150 175 200 TA - Ambient Temperature (C) Fig.3 - Pulse Waveform 6000 Measured at Zero Bias TJ = 25C tr = 10sec. CJ - Junction Capacitance(pF) IPPM - Peak Pulse Current,% IRSM 50 Fig.4 - Typical Junction Capacitance 10000 150 Pulse Width (td) Peak Value IPPM is defined as the point where the peak current decays to 50% of IPPM 100 Half Value- IPPM 2 10/1000sec.Waveform as defined by R.E.A. 50 td 0 1.0 0 2.0 3.0 3.0 4.0 1000 VR,Measured at Stand-Off Voltage, VWM 100 1000 10 1.0 4.0 10 100 200 VWM - Reverse Stand-Off Voltage (V) Fig.6 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typ.Transient Thermal Impedance 100 IFSM-Peak Forward Surge Current (A) 200 10 1.01 0.1 0.001 TJ = 25C f = 1.0MHZ Vsig = 50mVp-p Uni-Directional Bi-Directional t - Time(ms) Transient Thermal Impedance ( /W) 25 8.3ms Single Half Sine-Wave (JEDEC Method) Unidirectional Only 100 10 0.01 0.1 1 10 tp-Pulse Duration (sec) 100 1000 1 10 100 Number of Cycles at 60 Hz DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714