VISHAY
Document Number 84068
Rev. 7, 07-Jan-03
Vishay Semiconductors
www.vishay.com
1
Tape and Reel Standards
Taping Specifications SOD57 and SOD64 Package
Package Available Packaging
10´´ tape & reel 13´´ tape & reel Ammo Pack #1 Ammo Pack #2
Quantity / Reel Quantity / Reel Quantity / Box Quantity / Box
SOD57 5.000 5.000
SOD64 2.500 2.500
DO204AP(G1) 4.500 3.000
G3 1.600 1.000
G4 2.000 2.000
Description Symbol Specification (mm)
Component Pitch A5.0 ± 0.5
Inside Tape Spacing B52 + 2 mm - 1 mm
Lead to Lead Eccentricity ID1-D2I 1.4 max
Lead Extension K 0
Lead Bending M1.2 max
Cumulative Pitch P2.0 per 10 pitch
Exposed Adhesive S0.8 max
Ta p e W i d t h T6.0 ± 0.4
Tape Leader Beginning and end of reel or ammo pack. 300.0 min
Empty Spaces Consecutive missing components not allowed < 0.1 %
Polarity Marking All polarized components shall be oriented in the same direction.
The cathode tape shall be colored, and anode tape shall be white or light beige.
D1D2
A
P
E
K
S
T
B
W
|D1–D
2| = 1.4 (0.055) max.
0.8 (0.031) max.
0.8
(0.031)
max.
Dimensions A, M, K, P, S and T apply to both sides
6.0 ± 0.4
(0.236 ± 0.0157)
15802
Figure 1.
www.vishay.com
2
Document Number 84068
Rev. 7, 07-Jan-03
VISHAY
Vishay Semiconductors
Taping Specification DO204AP(G1), G3 and G4 Packages
Package Component Spacing ‘‘A‘‘ (Lead to Lead) Inside Tape Spacing‘‘B“ Cumulative Pitch Tolerance
DO204AP(G1) 5.0 mm + 0.5 mm
(0.197‘‘ ± 0.020‘‘)
52.4 mm + 1.5 mm/ - 0.4 mm
(2.062‘‘ + 0.059‘‘/ - 0.016‘‘)
Not to Exceed
1.5 mm (0.059‘‘) over 6
Consecutive
Components
G3, G4 10 mm + 0.5 mm
(0.394‘‘ ± 0.020‘‘)
52.4 mm + 1.5 mm/ - 0.4 mm
(2.062‘‘ + 0.059‘‘/ - 0.016‘‘)
(< 68.2 mm)
< 1.2 mm
16959
Figure 2.
VISHAY
Document Number 84068
Rev. 7, 07-Jan-03
Vishay Semiconductors
www.vishay.com
3
10‘‘ Reel Specification (SOD57 and SOD64 Packages)
13‘‘ Reel Specification (DO204AP(G1), G3 and G4 Packages)
Description Symbol Reel Size
10‘‘
Arbor Hole Diameter D030 ± 1 mm
Reel Diameter D2 250 ± 2 mm
Drive Hole Diameter D3 10 ± 1 mm
Reel Width W1 68 ± 1 mm
Drive / Arbor Hole Spacing W2 27.5 ± 1 mm
Core Material Plastic
Reel Material Plastic
Figure 3.
D0
D1
W1
15 801
W2
D2
D3
Figure 4.
91.9 (3.62) Dia.
50.8 (2.00) Dia.
38.1 (1.50) Dia.
14.3 (0.56) Dia.
Kraft
Paper
Anode Lead
White Tape
Cathode Lead
Colored Tape
C
13.0 Inch/
330 mm
16960
www.vishay.com
4
Document Number 84068
Rev. 7, 07-Jan-03
VISHAY
Vishay Semiconductors
Ammopack #1 Specification (SOD57 and SOD64 Packages) (Figure 5. )
Ammopack #2 Specification (DO204AP(G1), G3 and G4 Packages) ( Figure 6. )
Description Symbol Specification
Inches Millimeters
Length A10.25 ± 0.2 260 ± 5.0
Width B 2.75 ± 0.2 70 ± 5.0
Height C 5.75 ± 0.65 146 ± 16.0
Material: corrugated board (neutral)
Figure 5.
A
C
15800
Inspection hole
(both sides)
B
Dimension ‘‘A‘‘ Dimension ‘‘B‘‘ Dimension ‘‘C‘‘
10.0‘‘
(255 mm)
3.15‘‘
(80 mm)
4.53‘‘
(115 mm)
Figure 6.
AB
C
16956
VISHAY
Document Number 84068
Rev. 7, 07-Jan-03
Vishay Semiconductors
www.vishay.com
5
Preformed Leads (SOD64 Packages)
Some types of automatic insertion machines have
problems in bending the relatively thick leads of
SOD64 Sinterglass Diodes. To overcome this, our
diodes can be ordered with preformed leads as fol-
lows. Preformed Sinterglass Diodes are shipped in
bulk.
SUFFIX RA
SUFFIX RAP
SUFFIX RAS
Common bending version:
Other bending versions are available on request.
Figure 7.
Figure 8.
Figure 9.
Suffix A (mm) H (mm)
RA 15/10 RAS 15/10 RAP 15/10 15 10
RA 17.5/ 10 RAS 17.5/ 10 RAP 17.5/ 10 17.5 10
