Document 160-1 Chip Inductors - 1008HS Series (2520) Coilcraft "HS" series chip inductors have been designed especially for the needs of today's high frequency designer. Their ceramic construction delivers the highest possible SRF and excellent Q values. The non-magnetic coilform also ensures the utmost in thermal stability, predictability and batch consistency. Inductance2 Part number1 1008HS-100T_B_ 1008HS-120T_B_ 1008HS-150T_B_ 1008HS-180T_B_ 1008HS-220T_B_ 1008HS-270T_B_ 1008HS-330T_B_ 1008HS-390T_B_ 1008HS-470T_B_ 1008HS-560T_B_ 1008HS-680T_B_ 1008HS-820T_B_ 1008HS-101T_B_ 1008HS-121T_B_ 1008HS-151T_B_ 1008HS-181T_B_ 1008HS-221T_B_ 1008HS-271T_B_ 1008HS-331T_B_ 1008HS-391T_B_ 1008HS-471T_B_ 1008HS-561T_B_ 1008HS-621T_B_ 1008HS-681T_B_ 1008HS-751T_B_ 1008HS-821T_B_ 1008HS-911T_B_ 1008HS-102T_B_ DCR max6 Q min4 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 350 MHz 55 @ 350 MHz 55 @ 350 MHz 60 @ 350 MHz 60 @ 350 MHz 65 @ 350 MHz 65 @ 350 MHz 65 @ 350 MHz 60 @ 350 MHz 60 @ 350 MHz 60 @ 350 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 35 @ 50 MHz 35 @ 50 MHz Percent (nH) 10 @ 50 MHz 12 @ 50 MHz 15 @ 50 MHz 18 @ 50 MHz 22 @ 50 MHz 27 @ 50 MHz 33 @ 50 MHz 39 @ 50 MHz 47 @ 50 MHz 56 @ 50 MHz 68 @ 50 MHz 82 @ 50 MHz 100 @ 25 MHz 120 @ 25 MHz 150 @ 25 MHz 180 @ 25 MHz 220 @ 25 MHz 270 @ 25 MHz 330 @ 25 MHz 390 @ 25 MHz 470 @ 25 MHz 560 @ 25 MHz 620 @ 25 MHz 680 @ 25 MHz 750 @ 25 MHz 820 @ 25 MHz 910 @ 25 MHz 1000 @ 25 MHz SRF min5 tolerance3 5 5 5 5 5 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2 1. When ordering, please specify tolerance and packaging codes: 1008HS-102TGBC Tolerance: F = 1% G = 2% J = 5% (Table shows stock tolerances in bold.) Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). Irms7 (MHz) 4100 3300 2500 2500 2400 1600 1600 1500 1500 1300 1300 1000 1000 950 850 750 700 600 570 500 450 415 375 375 360 350 320 290 (mA) 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 650 650 580 620 500 500 450 470 470 400 300 400 360 400 380 370 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF840 test fixture. 7. Average current for a 15C rise above 25C ambient. 8. Operating temperature range -40C to +125C. 9. Electrical specifications at 25C. See Qualification Standards section for environmental and test data. For part marking data, see Color Coding section. Specifications subject to change without notice. Please check our website for latest information. (c) Coilcraft, Inc. 2005 (Ohms) 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.18 0.20 0.22 0.56 0.63 0.70 0.77 0.84 0.91 1.05 1.12 1.19 1.33 1.40 1.47 1.54 1.61 1.68 1.75 Document 160-1 Revised 02/09/05 Document 160-2 1008HS Series (2520) Typical L vs Frequency Typical Q vs Frequency 100 1000 47 nH 90 900 750 nH 80 100 nH 800 12 nH 700 Inductance (nH) Q factor 70 330 nH 60 750 nH 50 40 600 500 400 30 300 20 200 10 100 0 10 100 1000 10000 0 1 330 nH 100 nH 47 nH 12 nH 10 A 10000 H C F I G J F E terminal 1000 Frequency (MHz) Frequency (MHz) B overall 100 I Terminal wraparound: approx 0.015/0,38 both ends Recommended Land Pattern A max B max C max E F G H I J 0.105 0.095 0.070 0.080 0.020 0.060 0.100 0.040 0.050 2,67 2,41 1,78 2,03 0,51 1,52 2,54 1,02 1,27 Weight: 28.3 - 31.5 mg Terminations: Silver-palladium-platinum Tape and reel: 2000/7 reel; 7500/13 reel 8 mm tape width For packaging data see Tape and Reel Specifications section. Specifications subject to change without notice. Please check our website for latest information. (c) Coilcraft, Inc. 2005 Document 160-2 Revised 12/28/04