SIGC186T170R3
Edited by INFINEON Technologies AI PS DD HV3, L 7791-A, Edition 2, 04.09.03
IGBT3 Chip
This chip is used for:
• power module
FEATURES:
• 1700V Trench + Field Stop technology
• low turn-off losses
• short tail current
• positive temperature coefficient
• easy paralleling
Applications:
• drives
G
C
E
Chip Type VCE ICn Die Size Package Ordering Code
SIGC186T170R3 1700V
150A 13.63 x 13.63 mm2
sawn on foil Q67050-
A4148-A001
MECHANICAL PARAMETER:
Raster size 13.63 x 13.63
Emitter pad size 8 x ( 5.62 x 2.71 )
Gate pad size 1.12 x 1.12
mm
Area total / active 185.8 / 149.7 mm2
Thickness 190 µm
Wafer size 150 mm
Flat position 90 grd
Max.possible chips per wafer 69 pcs
Passivation frontside Photoimide
Emitter metalization 3200 nm AlSiCu
Collector metalization 1400 nm Ni Ag –system
suitable for epoxy and soft solder die bonding
Die bond electrically conductive glue or solder
Wire bond Al, <500µm
Reject Ink Dot Size ∅ 0.65mm ; max 1.2mm
Recommended Storage Environment store in original container, in dry nitrogen,
< 6 month at an ambient temperature of 23°C
SIGC186T170R3
Edited by INFINEON Technologies AI PS DD HV3, L 7791-A, Edition 2, 04.09.03
MAXIMUM RATINGS:
Parameter Symbol Value Unit
Collector-emitter voltage, Tj=25 °C VCE 1700 V
DC collector current, limited by Tjmax IC 1 ) A
Pulsed collector current, tp limited by Tjmax Icpuls 450 A
Gate emitter voltage VGE ±20 V
Operating junction and storage temperature Tj, Tstg -55 ... +150 °C
1 ) depending on thermal properties of assembly
STATIC CHARACTERISTICS (tested on chip), Tj=25 °C, unless otherwise specified:
Value
Parameter Symbol Conditions min. typ. max. Unit
Collector-emitter breakdown voltage V(BR)CES VGE=0V , IC= 4mA 1700
Collector-emitter saturation voltage VCE(sat) VGE=15V, IC=150A 1.6 2 2.4
Gate-emitter threshold voltage VGE(th) IC=6mA , VGE=VCE 5.2 5.8 6.4
V
Zero gate voltage collector curre nt ICES VCE=1700V , VGE=0V 8.2 µA
Gate-emitter leakage current IGES VCE=0V , VGE=20V 600 nA
Integrated gate resistor RGint 5 Ω
ELECTRICAL CHARACTERISTICS (tested at component):
Value
Parameter Symbol Conditions min. typ. max. Unit
Input capacitance Ciss 13196
Output capacitance Coss 549
Reverse transfer capacitance Crss
VCE=25V,
VGE=0V,
f=1MHz 438
pF
SWITCHING CHARACTERISTICS (tested at component), Inductive Load
Value
Parameter Symbol Conditions 1) min. typ. max. Unit
Turn-on delay time td(on) 0.30
Rise time tr 0.066
Turn-off delay time td(off) 1
Fall time tf
Tj=125°C
VCC=900V,
IC=150A,
VGE=-15/15V,
RG= 9.1Ω 0.30
µs
1) values also influenced by parasitic L- and C- in measurement and package.
SIGC186T170R3
Edited by INFINEON Technologies AI PS DD HV3, L 7791-A, Edition 2, 04.09.03
CHIP DRAWING:
SIGC186T170R3
Edited by INFINEON Technologies AI PS DD HV3, L 7791-A, Edition 2, 04.09.03
FURTHER ELECTRICAL CHARACTERISTICS:
This chip data sheet refers to the
device data sheet tbd
DESCRIPTION:
AQL 0,65 for visual inspection according to failure catalog
Electrostatic Discharge Sensitive Device according to MIL-STD 883
Test-Normen Villach/Prüffeld
Published by
Infineon Technologies AG,
Bereich Kommunikation
St.-Martin-Strasse 53,
D-81541 München
© Infineon Technologies AG 2002
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives world -wide (see
address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types
in question please contact your nearest Infineon Technologies Office.
Infineon Technologies components may only be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of such components can reasonably be expected to
cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or
system. Life support devices or systems are intended to be implanted in the human body, or to support
and / or maintain and sustain and / or protect human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
