LT73 linear positive tempco thermistor EU features thermal protection * * * * * Anti-leaching nickel barrier terminations Twenty-five specifiable temperature characteristics SMD thin film resistor with thermo-perceptivity Marking: Black four-digit on bronze body color Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction L c Type c W Solder Plating Ni Plating t d Protective Coating Dimensions inches (mm) W c d L (Inch Size Code) 2A (0805) .079.008 .049.008 .016.008 (2.00.2) (1.250.2) (0.40.2) .012 2B (1206) .126.008 .063.008 (1.60.2) (3.20.2) .016 .02.008 (0.50.3) (0.3 (0.4 t +.008 -.004 +0.2 ) -0.1 .02.004 (0.50.1) +.008 -.004 +0.2 ) -0.1 .024.004 (0.60.1) Resistive Inner Electrode Film Ceramic Substrate ordering information New Part # LT73 Type 2B T TD Size Code 2A: 0805 2B: 1206 Termination Material T: Sn (Other termination styles available, contact factory for options) 101 Packaging TD: 7" paper taping (5,000 pieces/reel) TE: 7" embossed plastic (4,000 pieces/reel) Resistance Value 2 significant figures + 1 multiplier J 1000 Tolerance T.C.R. G: 2% J: 5% applications and ratings Part Designation Power Rating Maximum Working Voltage Maximum Overload Voltage Thermal Time Constant Thermal Dissipation Constant LT732A 0.1W 50V 100V 1.0s 1.37mW/C LT322B 0.125W 75V 150V 1.5s Rated Ambient Temperature Operating Temperature Range +70C -40C to +125C 1.47mW/C Thermal time constant and dissipation constant are reference values, which are values of elements and vary with connecting or fixing methods. For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 184 12/19/12 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com LT73 linear positive tempco thermistor applications and ratings T.C.R. Tolerance 150, 250, 350, 450, 500 600, 700, 800, 900 1000, 1200, 1400 1600, 1800 2000, 2200, 2400 2600, 2800, 3000 3300, 3600, 3900 4200 4500 100x10-6/K 150x10-6/K Resistance Range E-24 15% 10% Resistance Tolerance LT732A LT732B 2k - 24k 1k - 20k 1k - 13k 510 - 4.7k 510 - 4.7k 510 - 3.0k 510 - 3.0k 100 - 1k 51 - 510 2k - 51k 1k - 43k 1k - 27k 1k - 10k 510 - 9.1k 510 - 6.2k 510 - 6.2k 100 - 2k 51 - 510 thermal protection T.C.R. (x10-6/K) G: 2% J: 5% T.C.R. Measuring Temperature: +25C ~ +75C Rated voltage = Power Rating x Resistance value or Max. working voltage, whichever is lower. environmental applications Derating Curve Examples of Temperature Characteristics of Resistance Resistance Changing Rate (R) 100 % Rated Power 80 60 40 For resistors operated at an ambient temperature of 70C or above, a power rating shall be derated in accordance with the above derating curve. 20 0 -40 -20 0 20 40 60 80 70 Ambient Temperature (C) 100 120 140 125 60 50 4500ppm/C 40 3300ppm/C 30 2400ppm/C 20 1600ppm/C 10 0 -10 -20 -30 -50 -25 0 25 50 75 100 125 Ambient Temperature (C) Approximate Expression for Resistance-Temperature Characteristics T.C.R. (x10-6/K) 3000 3300 3600 3900 4200 4500 C0 C1 0.9288 0.9232 0.9175 0.9099 0.9026 0.8948 0.0028 0.0030 0.0032 0.0035 0.0038 0.0041 C2 1.9983 2.9980 4.0000 4.0064 3.9964 4.0064 x x x x x x 10-6 10-6 10-6 10-6 10-6 10-6 Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70C Requirement R (% + 0.05) Limit Typical Within specified -- tolerance Within specified -- T.C.R. 1.0% 0.23% 1.0% 0.1% 1.0% 0.1% 3.0% 0.54% 3.0% 0.62% Test Method 25C +25C/+75C Rated voltage x 2.5 or maximum overload volume for 5 seconds, whichever is lower 260C 5C, 10 seconds 1 second -40C (30 minutes)/ +125C (30 minutes), 5 cycles 40C 2C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Confirming resistance drift is recommended since this product has a tendency to have bigger resistance change than general flat chip over 70C. Please pay attention not to be applied ESD, it may cause of resistance change. Actual Value (Out of Guarantee) Test Items Low Temperature Exposure High Temperature Exposure ESD Reference 0.05% 0.6% 500V Test Method -40C, 45 minutes 125C, 1000 hours Human model, 100 pF 1.5 k Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/19/12 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 185