Accessories MS3057-A Cable Clamp Standard MS3057 cable clamps have a dual clamping action to provide a balanced, positive hold on the wires and greatly reduce moisture transmission. This cable clamp accepts MS3420 bushings. MS3420 bushings can be nested to reduce the inside diameter to more closely match the diameter of the cable or wire bundle. STANDARD CLAMP SHELL SIZE 8S 10S/10SL 12/12S/12SL 14/14S 16/16S 18 20/22 24/28 32 36 40 THREAD 2B 1/2-24UNEF 5/8-24UNEF 5/8-24UNEF 3/4-20UNEF 7/8-20UNEF 1-20UNEF 1 3/16-18UNEF 1 7/16-18UNEF 1 3/4-18UNS 2-18UNS 2 1/4UNS-16 LOW COST CAST ZINC 97-3057-1003 97-3057-1004 97-3057-1004 97-3057-1007 97-3057-1008 97-3057-1010 97-3057-1012 97-3057-1016 97-3057-1020 97-3057-1024 - ALUMINUM W/ MAXIMUM ALUMINUM W/ STAINLESS STEEL CABLE DIAMETER BRASS SCREWS SCREWS INCH (mm) MS3057-3A M85049/41-3A .220 (5.58) MS3057-4A M85049/41-4A .312 (7.92) MS3057-4A M85049/41-4A .312 (7.92) MS3057-6A M85049/41-6A .438 (11.13) MS3057-8A M85049/41-8A .562 (14.27) MS3057-10A M85049/41-10A .625 (15.88) MS3057-12A M85049/41-12A .750 (19.0) MS3057-16A M85049/41-16A .938 (23.83) MS3057-20A M85049/41-20A 1.250 (31.75) MS3057-24A M85049/41-24A 1.375 (34.92) MS3057-28A M85049/41-28A 1.625 (41.28) STANDARD CLAMP AND TELESCOPIC BUSHING LOW COST ZINC WITH BUSHING BUSHING ID BUSHING INCLUDED INCH (mm) 97-3057-1003-1 MS3420-3 0.130 (3.3) 97-3057-1004-1 MS3420-4 0.220 (5.6) 97-3057-1004-1 MS3420-4 0.220 (5.6) 97-3057-1007-1 MS3420-6 0.312 (7.9) 97-3057-1008-1 MS3420-8 0.437 (11.1) 97-3057-1010-1 MS3420-10 0.562 (14.3) 97-3057-1012-1 MS3420-12 0.625 (15.9) 97-3057-1016-1 MS3420-16, -12 0.625 (15.9) 97-3057-1020-1 MS3420-20, -16 0.750 (19.0) 97-3057-1024-1 MS3420-24, -20 0.937 (23.8) - MS3057-C Waterproof Cable Clamp Standard MS3057-C waterproof cable clamp with mechanical strain relief for use with threaded endbells. Internal neoprene gland and compression ring will seal a broad range of round cable diameters as listed below. For reduction of cable diameters, order the appropriate MS3420A bushing in table. NEOPRENE SEALING GLAND SHELL SIZE 10SL 14S METAL COMPRESSION DISC PART NUMBER MS3057-4C MS3057-6C CABLE CLAMP WIRE DIAMETER INCHES (mm) MAX. MIN. .312 (7.93) .188 (4.80) .438 (11.12) .281 (7.10) MS3057-8C .530 (13.48) .312 (7.90) 18 MS3057-10C .625 (15.87) .375 (9.50) 20/22 MS3057-12C .750 (19.00) .500 (12.70) 24/28 MS3057-16C .940 (23.80) .625 (15.90) 32 MS3057-20C 1.25 (31.75) - 36 MS3057-24C 1.38 (35.00) 1.00 (25.40) 40 MS3057-28C 1.62 (41.25) 1.25 (31.80) All dimensions in inches (millimeters in parenthesis) For price & delivery: 800-642-8750 * For tech support: 800-523-0727 * www.PeiGenesis.com Specifications subject to change. 97 Series 16/16S OPTIONAL BUSHINGS PART NUMBER MAX. WIRE DIA. (mm) MS3420-4A .219 (5.56) MS3420-6A .312 (7.93) MS3420-4A .219 (5.56) MS3420-8A .438 (11.10) MS3420-6A .312 (7.93) MS3420-10A .438 (11.10) MS3420-6A .312 (7.93) MS3420-12A .540 (13.74) MS3420-8A .438 (11.10) MS3420-16A .750 (19.00) MS3420-12A .540 (13.74) MS3420-8A .438 (11.10) MS3420-20A .938 (23.80) MS3420-16A .750 (19.00) MS3420-12A .540 (13.74) MS3420-24A 1.12 (28.50) MS3420-18A .938 (23.80) MS3420-16A .750 (19.00) MS3420-28A 1.25 (31.75) MS3420-20A .940 (23.80) MS3420-16A .750 (19.00) 15 Accessories MS3420 Telescoping Bushings For use with Style A cable clamps and AIT/MS Style E/F endbells to eliminate dust, dirt, and oil from entering the cable clamp. Bushings can be nested, one inside the other, to reduce the inside diameter to better seal against the cable jacket. Each bushing will accept the next smallest bushing. SHELL SIZE 1ST BUSHING PART NUMBER INSIDE DIAMETER 2ND NESTED BUSHING INSIDE DIAMETER FITS IN CABLE CLAMP 10S/10SL MS3420-4 .220 (5.59) NONE - MS3057-4A 12/12S MS3420-4 .220 (5.59) NONE - MS3057-4A 14/14S MS3420-6 .312 (7.92) NONE - MS3057-6A 16S MS3420-8 .437 (11.10) NONE - MS3057-8A 16 MS3420-8 .437 (11.10) NONE - MS3057-8A 18 MS3420-10 .562 (14.30) NONE - MS3057-10A 20 MS3420-12 .625 (15.90) NONE - MS3057-12A 22 MS3420-12 .625 (15.90) NONE - MS3057-12A 24 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A 28 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A 32 MS3420-20 .937 (23.80) MS3420-16 .750 (19.05) MS3057-20A 36 MS3420-24 1.250 (31.75) MS3420-20 .937 (23.80) MS3057-24A 40 MS3420-28 1.375 (34.92) MS3420-24 1.250 (31.75) SE96-28A4 MS3420-A Reduction Bushings For use with MS3057-C cable clamps (Style C) to reduce the wire sealing diameter. Bushings can be nested, one inside the other, to progressively reduce the inside diameter of the cable clamp. The column labeled "reduction bushings" shows the acceptable nesting options for each clamp. Call for information. 9767 Cable Clamps 9767 waterproof cable clamp with mechanical strain relief. An internal neoprene gland seal bushing and compression washer will seal a broad range of round cable diameters as listed below. 10SL, 12S CABLE CLAMP PART NUMBER 9767-12-4 14S 9767-14-4 SHELL SIZE 97 Series 16 INCHES 0.219 (mm) (5.55) INCHES 0.020 (mm) (0.51) THREAD CLASS 2B UNEF 5/8-24 0.219 (5.55) 0.020 (0.51) 3/4-20 MAX. CABLE OUTSIDE DIAMETER MIN. CABLE OUTSIDE DIAMETER 14S 9767-14-6 0.344 (8.73) 0.176 (4.47) 3/4-20 16S, 16 9767-16-4 0.219 (5.55) 0.020 (0.51) 7/8-20 16S, 16 9767-16-6 0.344 (8.73) 0.176 (4.47) 7/8-20 16S, 16 9767-16-8 0.438 (11.12) 0.177 (4.50) 7/8-20 18 9767-18-6 0.344 (8.73) 0.176 (4.47) 1-20 18 9767-18-8 0.438 (11.12) 0.177 (4.50) 1-20 18 9767-18-10 0.563 (14.29) 0.292 (7.42) 1-20 20, 22 9767-22-8 0.438 (11.12) 0.177 (4.50) 1-3/16-18 20, 22 9767-22-10 0.563 (14.29) 0.292 (7.42) 1-3/16-18 20, 22 9767-22-12 0.688 (17.46) 0.370 (9.40) 1-3/16-18 24, 28 9767-28-10 0.563 (14.29) 0.292 (7.42) 1-7/16-18 24, 28 9767-28-12 0.688 (17.46) 0.370 (9.40) 1-7/16-18 24, 28 9767-28-16 0.844 (21.43) 0.536 (13.61) 1-7/16-18 32 9767-32-20 1.031 (26.19) 0.590 (14.99) 1-3/4-18 36 9767-36-16 0.844 (21.43) 0.536 (13.61) 2-18 All dimensions in inches (millimeters in parenthesis) For price & delivery: 800-642-8750 * For tech support: 800-523-0727 * www.PeiGenesis.com Specifications subject to change. Accessories Gaskets Synthetic rubber gaskets are used to ensure a moisture tight seal between a receptacle and the panel. Gaskets are available for front or rear panel mounting of style 3100 and 3102 connectors. Gasket thickness is approximately .031" (1 mm), for nonconductive and low temperature types. Conductive shielding gaskets contain an imbedded metal screen for EMI/RFI shielding in addition to moisture sealing. Gaskets are available for front or rear panel mounting of connectors. Gasket thickness is .020" (.5 mm). SHELL SIZE 8S 10S/10SL 12/12S 14/14S 16S 16 18 20 22 24 28 32 36 40 NON-CONDUCTIVE 10-040450-008 10-040450-010 10-040450-012 10-040450-014 10-040450-016 10-040450-016 10-040450-018 10-040450-020 10-040450-022 10-040450-024 10-040450-028 10-040450-032 10-040450-036 10-040450-040 CONDUCTIVE 10-040450-08S 10-040450-10S 10-040450-12S 10-040450-14S 10-040450-16S 10-040450-16S 10-040450-18S 10-040450-20S 10-040450-22S 10-040450-24S 10-040450-28S 10-040450-32S 10-040450-36S 10-040450-40S LOW TEMPERATURE 10-036675-008 10-036675-010 10-036675-012 10-036675-014 10-036675-016 10-036675-016 10-036675-018 10-036675-020 10-036675-022 10-036675-024 10-036675-028 10-036675-032 10-036675-036 10-036675-040 Metal Dust Caps With Sash Chain & Dummy Receptacles Metal dust caps are used to protect the contacts when the connectors are left unmated. Dust caps come with metal chain lanyards. Dummy receptacles are for front or rear panel mounting. The center of the dummy receptacle is closed. Dummy receptacles mount on the same centers and have the same outside dimensions as a 97-3102A receptacle. A version with a clearance hole through the middle of the connector is also available. Call for ordering information. DUST CAPS RECEPTACLE PLUG CAP MS25042-8DA MS25042-10DA MS25042-12DA MS25042-14DA MS25042-16DA MS25042-17DA MS25042-18DA MS25042-20DA MS25042-22DA MS25042-24DA MS25042-28DA MS25042-32DA MS25042-36DA MS25042-40DA MS25043-8DA MS25043-10DA MS25043-12DA MS25043-14DA MS25043-16DA MS25043-17DA MS25043-18DA MS25043-20DA MS25043-22DA MS25043-24DA MS25043-28DA MS25043-32DA MS25043-36DA MS25043-40DA MS3105-8 MS3105-10 MS3105-12 MS3105-14 MS3105-16 MS3105-17 MS3105-18 MS3105-20 MS3105-22 MS3105-24 MS3105-28 MS3105-32 MS3105-36 MS3105-40 97 Series SHELL SIZE 8S 10S/10SL 12/12S/12SL 14/14S 16S 16 18 20 22 24 28 32 36 40 DUMMY RECEPTACLES 17 For price & delivery: 800-642-8750 * For tech support: 800-523-0727 * www.PeiGenesis.com Specifications subject to change.