NXI150 Series Single output DC-DC CONVERTERS 81 A DC-DC Non-Isolated Converters 1 NEW Product * Meets VRM9.1 specification * Microprocessor voltage identification input - 5 Bit VID input - 1.10 Vdc to 1.85 Vdc in 25 mV steps * Up to 50 A/s load transient * Democratic current sharing, no need for master/slave configuration * Remote sense for improved load regulation * Vertical plug-in to standard motherboard connector with or without retention latch * Available RoHS compliant The NXI150 non-isolated dc-dc converter is designed to meet the exceptionally fast transient response requirements of today's microprocessors and fast switching logic in a compact size at a very affordable price. Advanced circuit techniques, component selection and placement optimization, state-of-the-art thermal packaging, and Surface Mount Technologies provide a high power density, highly reliable, and very precise voltage regulation system for advanced microprocessors. Multi-phase power conversion techniques allow the NXI converters to lead the industry with regard to conversion efficiency without adding unneccesary complexity. On-board active current sharing circuit guarantees the current sharing specification is met during static and dynamic load conditions. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 C unless otherwise stated OUTPUT SPECIFICATIONS GENERAL CHARACTERISTICS Voltage adjustability 1.10-1.85 Vdc Output setpoint accuracy Vout 0.8% Ripple and noise (See Notes 1 and 2) 20 MHz bandwidth Transient response peak dev. settling time See Note 3 15 mV pk-pk 50 mV 25 s Continuous current limit, foldback automatic recovery INPUT SPECIFICATIONS Input voltage range 12 Vin nominal Input current Operation No load Remote OFF UVLO turn ON voltage UVLO turn OFF Voltage OUTEN Logic compatibility ON OFF 1.5 V output @ 65 A Switching frequency Fixed (See Note 4) Standards 11.0-12.6 Vdc 16.2 A max. 250 mA 45 mA max. 10.45 V typ. 8.55 V typ. Nominal line 10 ms max. Open circuit Ref. to -input >1.8 Vdc <0.8 Vdc MTBF 85% 1 MHz 94V-0 Flammability rating Weight Short-circuit protection Start-up time Efficiency 70 g (2.46 oz) Telcordia SR-332 Mating connector 1,800,000 hours (See Note 5) ENVIRONMENTAL SPECIFICATIONS Maximum temperature shock Operating Temperature shock Operating Non-operating Humidity (Non-condensing) Operating Storage 85% RH 95% RH Altitude Operating Storage 10,000 feet max. 50,000 feet max. Shock Operational and non-operational 50 G 11 ms, half sine wave Vibration (See Note 6) Operational and non-operational 0.02 G2/Hz max. Electrostatic discharge Operating IEC61000-4-2 (See Note 7) non-operating Thermal performance (See Note 8) Operating ambient temperature non-operating 5 C/10 min. 10 C/hour 20 C/hour ESD 15 kV ESD 25 kV 0 C to +60 C -40 C to +100 C Filename: NXI150.PDF Rev (03): 20 Dec 2005 NXI150 Series Single output DC-DC CONVERTERS 81 A DC-DC Non-Isolated Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm INPUT VOLTAGE OUTPUT VOLTAGE OVP 12 Vdc 1.10-1.85 Vdc 120% of VID setting OUTPUT CURRENT (MIN) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) REGULATION LOAD MODEL NUMBER (9,10) 0A 81 A 85% 0.95 mV/A NXI150-12P1V8CY TABLE 1: PIN CONNECTIONS PIN NO. FUNCTION PIN NO. FUNCTION NEW Product TABLE 2: VOLTAGE IDENTIFICATION (VID) CODES VID4 VID3 VID2 VID1 VID0 VDAC 1 Vin+ 62 Vin- 1 1 1 1 1 Off 2 Vin+ 61 Vin- 1 1 1 1 0 1.100 3 Vin+ 60 Vin- 1 1 1 0 1 1.125 4 Vin+ 59 Vin- 1 1 1 0 0 1.150 5 Reserved 58 VRM-pres 1 1 0 1 1 1.175 6 Key 57 VID4 1 1 0 1 0 1.200 7 VID3 56 VID2 1 1 0 0 1 1.225 8 VID1 55 VID0 1 1 0 0 0 1.250 9 Reserved 54 Ishare 1 0 1 1 1 1.275 10 PWRGD 53 OUTEN 1 0 1 1 0 1.300 11 Vo sen- 52 Vo sen+ 1 0 1 0 1 1.325 12 Reserved 51 Reserved 1 0 1 0 0 1.350 13 Vo- 50 Vo+ 1 0 0 1 1 1.375 14 Vo+ 49 Vo+ 1 0 0 1 0 1.400 15 Vo- 48 Vo- 1 0 0 0 1 1.425 16 Vo+ 47 Vo+ 1 0 0 0 0 1.450 17 Vo- 46 Vo- 0 1 1 1 1 1.475 18 Vo+ 45 Vo+ 0 1 1 1 0 1.500 19 Vo- 44 Vo- 0 1 1 0 1 1.525 20 Vo+ 43 Vo+ 0 1 1 0 0 1.550 21 Vo- 42 Vo- 0 1 0 1 1 1.575 22 Vo+ 41 Vo+ 0 1 0 1 0 1.600 23 Vo- 40 Vo- 0 1 0 0 1 1.625 24 Vo+ 39 Vo+ 0 1 0 0 0 1.650 25 Vo- 38 Vo- 0 0 1 1 1 1.675 26 Vo+ 37 Vo+ 0 0 1 1 0 1.700 27 Vo- 36 Vo- 0 0 1 0 1 1.725 28 Vo+ 35 Vo+ 0 0 1 0 0 1.750 29 Vo- 34 Vo- 0 0 0 1 1 1.775 30 Vo+ 33 Vo+ 0 0 0 1 0 1.800 31 Vo- 32 Vo- 0 0 0 0 1 1.825 0 0 0 0 0 1.850 Filename: NXI150.PDF Rev (03): 20 Dec 2005 NXI150 Series Single output DC-DC CONVERTERS 81 A DC-DC Non-Isolated Converters 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.255 (6.48) Max 1 31 62 32 NEW Product 0.250 (6.35) Max 2.300 (58.42) 3.800 (96.52) 0.700 (17.78) 62 32 0.936 (23.77) 0.042 (1.07) 1.243 (31.57) 0.093 (2.36) 0.307 (7.80) 0.063 0.007 THICK FR-4 2-Sided CKT BD W/Gold Plated 30" Connector Fingers CL 30 EQ Spaces @ 0.100 (2.54) each Equals 3.000 (76.20) TOL Non-Accum 3.186 (80.92) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place 0.02 3 Place 0.010 Figure 1: Mechanical Drawing Notes Notes Cond 1 8 2 3 4 5 6 7 Recommended output capacitance, 8 x 560 F/4 V OSCON and 10 x 4.7 F/6.3 V MLCC. 15 mV pk-pk ripple. Vin = 12 V, Vout = 1.5 V, Iout = 65 A. 125 mV peak deviation when slewing load from no load to full load at 50 A/s. Recommended capacitors (per Note 1) required across output. Each phase operates at a fixed 250 kHz. Effective fundamental output frequency is 1 MHz / 4 phases each at 250 kHz interleaved. Recommended mating connector is AMP 1489162-1 or equivalent. From 5 Hz to 20 Hz, maintaining 0.02 G2/Hz from 20 Hz to 500 Hz, all axes. When included in the users system ESD event shall cause no out-ofregulation conditions. Please consult your local application support for: Longform Datasheet and Application Note for the de-rating curves . 9 The `Y' suffix indicates that these parts are TSE RoHS 5/6 (non Pb-free) compliant. 10 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. (11,12) Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult your local application support for: 4 Application Note 4 Longform Datasheet www.artesyn.com Filename: NXI150.PDF Rev (03): 20 Dec 2005