17
10
4
1
39
16 24 31
25 32
39
40
46
47
52
53
55
Amphenol Cylindrical Connectors
for Printed Circuit Board Applications
®
12-170-2
Proven & reliable cylindrical
connector solutions for PC
board attachment:
MIL-DTL-38999, MIL-C-26482
and MIL-5015, with a wide
range of contact
arrangements and options
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue, Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157
www.amphenol-aerospace.com
This catalog has been specifically designed to
assist in the critical process of selecting
the right cylindrical connector for a printed circuit
board application.
Contact arrangements have been carefully
selected to guide designers to the most
commonly available and widely used
insert patterns.
Pin-out location illustrations of these
contact insert patterns are shown first,
followed by connector shell drawings in
three series:
MIL-DTL-38999, MIL-C-26482, MIL-5015.
For more information on the wide
variety of PC tail contacts that are
offered by Amphenol, see catalog 12-130,
High Frequency Contacts, which also
includes coax, twinax, triax and quadrax
shielded contacts.
Amphenol
Amphenol
17
10
4
1
39
16 24 31
25 32
39
40
46
47
52
53
55
Amphenol Cylindrical Connectors
for Printed Circuit Board Applications
®
12-170-2
Proven & reliable cylindrical
connector solutions for PC
board attachment:
MIL-DTL-38999, MIL-C-26482
and MIL-5015, with a wide
range of contact
arrangements and options
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue, Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157
www.amphenol-aerospace.com
This catalog has been specifically designed to
assist in the critical process of selecting
the right cylindrical connector for a printed circuit
board application.
Contact arrangements have been carefully
selected to guide designers to the most
commonly available and widely used
insert patterns.
Pin-out location illustrations of these
contact insert patterns are shown first,
followed by connector shell drawings in
three series:
MIL-DTL-38999, MIL-C-26482, MIL-5015.
For more information on the wide
variety of PC tail contacts that are
offered by Amphenol, see catalog 12-130,
High Frequency Contacts, which also
includes coax, twinax, triax and quadrax
shielded contacts.
Amphenol
Amphenol
Amphenol has earned the
reputation as the leader in the
military electrical connection arena.
Amphenol’s interconnects meet
almost any aerospace and ground
vehicle design need as well as
many industrial needs.
Table of Contents
Amphenol® Cylindrical Connectors
for Printed Circuit Board Applications Page
Introduction ..............................................................................1
Guide to Selecting a PCB Cylindrical Connector..................2, 3
Insert Availability ......................................................................4
Insert Arrangment Drawings................................................5-24
Alternate Positioning .........................................................25-26
MIL-DTL-38999, Series I (LJT) Shell Styles ......................27-31
MIL-DTL-38999, Series II (JT) Shell Styles .......................32-34
MIL-DTL-38999, Series III (Tri-Start) Shell Styles.............35-39
Stand-off Adapter for use with MIL-DTL-38999
PCB Connectors..................................................................... 40
MIL-C-26482, Series 1 (PT) Shell Styles.......................... 41, 42
MIL-5015 (MS3102) Shell Style.............................................. 43
Universal Header Assemblies for use with
Flex print or PCB Connectors........................................... 44, 45
Additional Products – Rectangular, for PCB Application ...46-48
Amphenol Sales Office and Distributor Listing
If more information is needed concerning the products in this publica-
tion, or if you have any special application needs, please contact your
nearest Amphenol sales office or Amphenol Corporation at the
following address:
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Ave., Sidney, NY 13838-1395
Phone: 800-678-0141 or 607-563-5011
Fax: 607-563-5157
See this catalog and the majority of catalogs of Amphenol Aerospace
and Amphenol Industrial Interconnection Products at:
www.amphenol-aerospace.com
Amphenol operates quality systems that are certified to ISO9001:2000
by third party registrars.
Amphenol has earned the
reputation as the leader in the
military electrical connection arena.
Amphenol’s interconnects meet
almost any aerospace and ground
vehicle design need as well as
many industrial needs.
Table of Contents
Amphenol® Cylindrical Connectors
for Printed Circuit Board Applications Page
Introduction ..............................................................................1
Guide to Selecting a PCB Cylindrical Connector..................2, 3
Insert Availability ......................................................................4
Insert Arrangment Drawings................................................5-24
Alternate Positioning .........................................................25-26
MIL-DTL-38999, Series I (LJT) Shell Styles ......................27-31
MIL-DTL-38999, Series II (JT) Shell Styles .......................32-34
MIL-DTL-38999, Series III (Tri-Start) Shell Styles.............35-39
Stand-off Adapter for use with MIL-DTL-38999
PCB Connectors..................................................................... 40
MIL-C-26482, Series 1 (PT) Shell Styles.......................... 41, 42
MIL-5015 (MS3102) Shell Style.............................................. 43
Universal Header Assemblies for use with
Flex print or PCB Connectors........................................... 44, 45
Additional Products – Rectangular, for PCB Application ...46-48
Amphenol Sales Office and Distributor Listing
If more information is needed concerning the products in this publica-
tion, or if you have any special application needs, please contact your
nearest Amphenol sales office or Amphenol Corporation at the
following address:
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Ave., Sidney, NY 13838-1395
Phone: 800-678-0141 or 607-563-5011
Fax: 607-563-5157
See this catalog and the majority of catalogs of Amphenol Aerospace
and Amphenol Industrial Interconnection Products at:
www.amphenol-aerospace.com
Amphenol operates quality systems that are certified to ISO9001:2000
by third party registrars.
1
Amphenol provides three popular connector series with PC tail contacts. The following key
points give a quick overview of these series. For more detail, there are series catalogs avail-
able as listed below*. Go to www.amphenol-aerospace.com to view and download these
catalogs. There is a guide to selecting a cylindrical connector with printed circuit board con-
tacts on the following page to assist you further.
MIL-DTL-38999 CONNECTORS, METAL & COMPOSITE
• Lightweight, compact, high density and high reliability cylindrical
• Operating voltage to 900 VAC (RMS) at sea level
• Envir onm en tal ly res is tant
• Solder or crimp rear release contacts in mating plug
• Series I (LJT) - Bayonet coupling
• Scoop-proof (recessed pins) offers maximum contact
protection
• Series II (JT) - Bayonet coupling
• For applications requiring maximum weight/space
saving s and reliab ili ty
• Series III (Tri-Start) - Threaded, quick coupling in one
comple te turn
• Designed for general duty as well as severe environmental
applications
• Superior EMI shielding with grounding fingers and
metal-to-metal mating
• Filter/Transient protection versions available
• Scoop-proof contact protection
• Stainless steel firewall versions, and composite versions
MIL-C-26482 CONNECTORS
• Medium size, widely used cylindrical
• Operating voltage to 1,000 VAC (RMS) at sea level
• Series 1 (PT) - Bayonet coupling - most commonly used in PCB
applications
• Envir onm en tal ly res is tant
• Solder or crimp front and rear release contacts in mating plug
Black/green zinc alloy plating (cadmium-free) available
MIL-5015 CONNECTORS
• Medium–heavy weight, time-tested cylindrical
• Operating voltage to 1,500 VAC (RMS) at sea level
• Environmentally resistant or general duty
• Threaded coupling
• Solder or crimp rear insertion contacts in mating plug
• Black/green zinc alloy plating (cadmium-free) available
Also provided in this catalog are several additional product options for the
design er of PCB board ap plica tions . For exa mple: Amphen ol’s fl ex asse mblie s
provide solutions for attachment to PCB boards wher e a self-locking termi nal
pad is needed or in tight-fitting spa ce requirements . Connectors wi th compliant
pin contacts are available, and pc tails within shielded coax, twinax and triax
contacts are available. At the end of the catalog, see a brief description of
Amphenol PCB rectangular connectors, backplane assemblies, terminal blocks
and wiring interface modules.
Go to www.amphenol-aerospace for catalogs online.
* Request Catalog 12-090 for MIL-DTL-38999 Series I, II
Request Catalog 12-092 for MIL-DTL-38999 Series III
Request Catalog 12-070 for MIL-C-2648 2, Series 1, 2
Request Catalog 12-071 for Matrix MIL-C-26482 Series 2
Request Catalog 12-020 for MIL-5015
Note: MIL-DTL-38999 supersedes MIL-C-38999.
Amphenol Cylindrical Connectors
for Printed Circuit Board Applications
®
38999 Ser ies III Box Mount Connector
with PC Tails
26482 Series 1 Jam Nut
Connector with PC Tails
38999 Seri es III Connector with a Special
Configuration Composite Shell and PC
Tails
5015 Box Mount Connector
with PC Tails
Special 38999 Connector with
Stand-off Shell and
PC Tails
Flex Terminatio n with MIL-C-26482 Special Con-
nector
1
1
Amphenol provides three popular connector series with PC tail contacts. The following key
points give a quick overview of these series. For more detail, there are series catalogs avail-
able as listed below*. Go to www.amphenol-aerospace.com to view and download these
catalogs. There is a guide to selecting a cylindrical connector with printed circuit board con-
tacts on the following page to assist you further.
MIL-DTL-38999 CONNECTORS, METAL & COMPOSITE
• Lightweight, compact, high density and high reliability cylindrical
• Operating voltage to 900 VAC (RMS) at sea level
• Envir onm en tal ly res is tant
• Solder or crimp rear release contacts in mating plug
• Series I (LJT) - Bayonet coupling
• Scoop-proof (recessed pins) offers maximum contact
protection
• Series II (JT) - Bayonet coupling
• For applications requiring maximum weight/space
saving s and reliab ili ty
• Series III (Tri-Start) - Threaded, quick coupling in one
comple te turn
• Designed for general duty as well as severe environmental
applications
• Superior EMI shielding with grounding fingers and
metal-to-metal mating
• Filter/Transient protection versions available
• Scoop-proof contact protection
• Stainless steel firewall versions, and composite versions
MIL-C-26482 CONNECTORS
• Medium size, widely used cylindrical
• Operating voltage to 1,000 VAC (RMS) at sea level
• Series 1 (PT) - Bayonet coupling - most commonly used in PCB
applications
• Envir onm en tal ly res is tant
• Solder or crimp front and rear release contacts in mating plug
Black/green zinc alloy plating (cadmium-free) available
MIL-5015 CONNECTORS
• Medium–heavy weight, time-tested cylindrical
• Operating voltage to 1,500 VAC (RMS) at sea level
• Environmentally resistant or general duty
• Threaded coupling
• Solder or crimp rear insertion contacts in mating plug
• Black/green zinc alloy plating (cadmium-free) available
Also provided in this catalog are several additional product options for the
design er of PCB board ap plica tions . For exa mple: Amphen ol’s fl ex asse mblie s
provide solutions for attachment to PCB boards where a self-locking terminal
pad is needed or in tight-fitting spa ce requirements . Connectors with com pliant
pin contacts are available, and pc tails within shielded coax, twinax and triax
contacts are available. At the end of the catalog, see a brief description of
Amphenol PCB rectangular connectors, backplane assemblies, terminal blocks
and wiring interface modules.
Go to www.amphenol-aerospace for catalogs online.
* Request Catalog 12-090 for MIL-DTL-38999 Series I, II
Request Catalog 12-092 for MIL-DTL-38999 Series III
Request Catalog 12-070 for MIL-C-26482, Series 1, 2
Request Catalog 12-071 for Matrix MIL-C-26482 Series 2
Request Catalog 12-020 for MIL-5015
Note: MIL-DTL-38999 supersedes MIL-C-38999.
Amphenol Cylindrical Connectors
for Printed Circuit Board Applications
®
38999 Series III Box Mount Connector
with PC Tails
26482 Ser ies 1 Jam Nu t
Connector with PC Tails
38999 Series III Connector with a
Special Configuration Composite
Shell and PC Tails
5015 Box Mou nt Connector
with PC Tails
Special 38999 Connector
with Stand-o ff Shell and
PC Tails
Flex Te rmin ation with MIL-C-2 648 2 Sp ecial
Connector
1
2
Guide to Selecting a PCB Cylindrical
Connector
The conn ector s electi on proc ess is one of th e most i mporta nt engin eering deci-
sions to be made in any electronic applicati on. Am phenol has created this cat-
alog specifically to provide the necessary information to select, layout and
design both the appropriate Amphenol® cylindrical connec tor with PCB con-
tacts and the connector footprint (contact locations) on the printed circuit
board. The guide that fol lows is for appl ication of cy lindrical co nnector s on rigid
printed circuit boards and also applies if a flex print assembly or other optional
is be ing used.
Engineers working on those PCB or fl ex print app lication s requiring re ctangula r
connectors are encouraged to refer to page 46-48 and ask for Amphenol Rect-
angular Produ ct catalogs .
How To Select a Cylindrical Connector for a PCB Application
The data provided in this c atalog is b ased on th ree cyli ndrical c onnector seri es:
MIL-DTL-38999 Series I, II and III, MIL-C-26482 Series 1, and MIL-C-5015.
See page 1 for electrical and environmental features and differences of these
three series. The “hot” side of the application determines the choice of pin or
socket genders of the contacts.
How to Measure the PCB Tail Length
The tail length of the PCB is the portion of the contact that extends beyond the
rear of the shell. This length will vary in relationship to the mounting flange,
depending on the series of connector selected. Standard lengths are shown on the connector shell style
drawings in this
catalog . These shell st yle dra wing pag es als o provide ho w to orde r part num bering for standa rd PCB cyli n-
drical connectors.
When computing the desired tail length, it is important to take into consideration the following factors:
• The connector series and shell style.
• The mounting style of the receptacle; jam nut (D hole) or panel mount (four holes).
This can affect the overall length of the tail.
• The extension of the tail beyond the opposite side of the board or the flex.
• The space required to adequately clean flux from between the board or flex and the rear
of the connector shell. Connectors that are mounted flush against the board may trap
soldering flux which could lead to corrosion of the solder joints.
Would Alignment Discs, Headers or
Special Stand-off Shells be Beneficial?
Any mechanical methods needed to stabilize the
board or flex to the connector and/or the panel.
The PCB tails shown in this catalog are of one
dia m eter. Stepped tails or PCB tails with an
increased diameter on a designated portion may
be required for certain applications.
Alignme nt di sc s are av ai lab le w hi ch provi de ea se
of alignment of pins to board s, pr otection during
shipment and optimized electrical circuit separa-
tion. Header assemblies (see pages 44 & 45) are
available which provide time and cost saving
potentials. Standoffs may be required for certain
applications. Amphenol has developed a new
stand-off adapter (see page 40) which may elimi-
nate the need for special stand-off shell designs.
Connectors with cl inch nuts c an be pr ovided.
Please call Amphenol to discuss any optional
designs or any special requirements.
Special Design with Longer PC
Tails in a 38999 Composite Shell
Connector. Also shows an Align-
ment Disc.
Universal Header Assem blies are avail-
able for Flex Print/PC Board Mounting.
Beneficial especially when electrical
testing of the connect or requires it to be
removed and reattached.
Stand-off Adapter on a Jam Nut
Receptacle.
3
What Determines the Diameter of the PCB Tail?
The outsi de diam eter of t he PCB tail is de termin ed by the insi de diam eter of the plate d through -hole on
the board or f lex print. The sta ndard o r mo st pop ular di ameter s a re shown in the cha rt on th e next page
and are called out in the connector illustrations in this catalog.
For availability of other contact diameters, consult Amphenol, Sidney NY.
Standard diameters of PCB tails
Connector Ser ies Size 16 Contact Size 20 Contact Size 22D Contact
MIL-DTL-38999 .062 ±.001 .019 ±.001 .019 ±.001
MIL-C-26482 .030 ±.001 .030 ±.001 Not available
MIL-5015 .030 ±.001 Not available Not available
Should PCB Tails be Gold Plated or Pre-tinned?
The standard PCB tails for MIL-DTL-38999 and MIL-C-26482 receptacles
have gold plating, .00050 inches over nickel. PCB tails for MIL-C-5015
receptacles are plated with silver, .00010 inches over copper. Amphenol
can subs tit ute a pre -tin ned version of thes e tai ls to facil ita te the termi nation
process . Thi s pre- tinning is a 60/40 lea d-ti n all oy . Ca ll Am phe nol for furthe r
information on pre-tinning and any other plating of contacts not covered in
this catalog.
Would Flex Assemblies be Necessary or Beneficial for the
Application?
Flex p r int c an radicall y si mpl ify the as se mb ly of a conne ct or to a s ys tem , as
well as eliminate wiring errors. Amphenol offers connector flex assemblies
through ACT, Advanced Circuit Technologies division. Features and bene-
fits of using flex technology include:
• Available for MIL-DTL-38999 (including filter EMI/EMP types),
MIL-5015 and MIL-C-26482 cylindrical connectors
•Sculptures
® Flexible Circuits with built-in terminations
• Eliminates failures associated with crimped or solder-on contacts
• Geome tric al ly fit tigh t spac e requ irem en ts and cr eate a self-lo ckin g
terminal pad
Should Other PC Tail Contact Types be Considered?
Press-Fit Connectors with compliant pins are available which engage
the plated through-holes in the board without the need for soldering.
This optional contact style offers the following benefits:
• Improved board processing time
• Excelle nt tem pera ture perform an ce
• Ideal for low-lead applications
For more in form ati on on Press-Fit co nnectors with comp lia nt pi ns refer
to Amphenol data sheet #188.
Special Qu adra x contacts have b een des ign ed wi th PC tai ls. Co ax , twi-
nax and triax contacts can also have PC tails. Refer to Amphenol cata-
log 12-130. Go online at www.amphenol-aerospace.com or consult
Amphenol Aerospace for further information.
Guide to Selecting a PCB Cylindrical
Connector, cont.
Quadrax Contacts with PC
Tails in a 38999 Conn ector
with Special Stan d-off Shell
Quadrax PC Tail Contacts
Combined with Standard PC
Tail Co ntact s
Compliant Pin Contacts in a
Bayonet 38999 Catalog
Flex Terminati on for Attachment to PC Boards
4
Cylindrical Connectors with PCB contacts
insert availability
The following table lists the most commonly used insert arrangements for printed circuit board application of
MIL-DTL-38999, MIL-C-26482 and MIL-C-5015 cylindrical connectors. This represents the most readily avail-
able patterns within these series. See illustrations of these selected patterns on the following pages. If you
require other arrangements than what are shown here, consult Amphenol for further availability.
* For information on size 12 PC tail contacts consult Amphenol Aerospace.
MIL-DTL-38999
MIL-C-26482 MIL-5015 Service
Rating Total
Contacts
Contact Size*
JT
Series II LJT
Series I Tri-Start
Series II I 22D 20 16
8-3 9-3 8-3 M/I 3 3
8-35 9-35 9-35 M 6 6
8-98 9-98 9-98 8-98 I 3 3
10SL-3 A 3 3
10-5 11-5 11-5 10-5 I 5 5
11-6 10-6 I 6 6
10-35 11-35 11-35 M 13 13
12-3 13-3 12-3 II 3 3
12-10 I 10 10
12-35 13-35 13-35 M 22 22
14S-6 Inst. 6 6
14-18 15-18 15-18 14-18 I 18 18
14-19 15-19 15-19 14-19 I 19 19
14-35 15-35 15-35 M 37 37
16S-1 A 7 7
16-26 17-26 17-26 16-26 I 26 26
16-35 17-35 17-35 M 55 55
18-1 A/Inst. 10 10
18-11 19-11 19-11 18-11 II 11 11
18-32 19-32 19-32 18-32 I 32 32
18-35 19-35 19-35 M 66 66
20-11 Inst. 13 13
20-27 21-27 20-27 I 27 27
20-35 21-35 21-35 M 79 79
20-41 21-41 21-41 20-41 I 41 41
22-14 A 19 19
22-35 23-35 23-35 M 100 100
22-55 23-55 23-55 22-55 I 55 55
24-5 A 16 16
24-28 Inst. 24 24
24-31 24-31 I 31 31
24-35 25-35 25-35 M 128 128
24-61 25-61 25-61 24-61 I 61 61
28-15 A 35 35
5
51
42
3
.045
.045
.078
.090
.078
6
CA
B
.079
.018
.056
.056
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #8-3 / 9-3
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5
Insert Designation: 8-3 9-3 NA 8-3 NA
Number of
Contacts Contact
Size Service
Rating*
320M/I
Contact Locations
Front face of pin insert shown
Insert Arrangement #8-35 /9-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5
Insert Desi g nation: 8-35 9-35 9-35 NA NA
Number of
Contacts Contact
Size Service
Rating
622DM
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
*Servi ce Rating: M for MIL-DTL-38999
I for MIL-C-26482
6
A
C
B
.038
.075
.065
.065
C
B
.091
.053
.105
A
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #8-98 / 9-98
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015
Insert Designation: 8-98 9-98 9-98 8-98 NA
Number of
Contacts Contact
Size Service
Rating
320I
Contact Locations
Front face of pin insert shown
Insert Arrangement #10SL-3
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015
Insert Designation: NA NA NA NA 10SL-3
Number of
Contacts Contact
Size Service
Rating
316A
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
7
AB
C
D
E
F
.065
.113
.130
.065
.130
A
E
DB
C
.065
.065
.130 .056
.065
.113
.113
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #10-5 / 11-5
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5
Insert Designation: 10-5 11-5 11-5 10-5 NA
Number of
Contacts Contact
Size Service
Rating
520I
Contact Locations
Front face of pin insert shown
Insert Arrangement #10-6 / 11-6
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5
Insert Desi g nation: NA 11-6 NA 10-6 NA
Number of
Contacts Contact
Size Service
Rating
620I
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
8
B
.094
.058
.111
A
C
.118
.045
.035
.146
.049
.045
.118
.146 .056
.085
.138
5
2
13
3
10
11
6
7
12
4
8
9
1
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #10-35 / 11-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015
Insert Desi g nation: 10-35 11-35 11-35 NA NA
Number of
Contacts Contact
Size Service
Rating
13 22D M
Contact Locations
Front face of pin insert shown
Insert Arrangement #12-3 / 13-3
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015
Insert Desi g nation: 12-3 13-3 NA 12-3 NA
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
Number of
Contacts Contact
Size Service
Rating
316II
9
11
.030
.026
.088
.107
.158
.197
.203
.093
.120
.075
.045
.117
.126
.182
21
1
.130
.195
.120
.065
AB
C
D
E
F
G
HKJ
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #12-10
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5
Insert Desi g n ation: NA NA NA 12-10 NA
Number of
Contacts Contact
Size Service
Rating
10 20 I
Contact Locations
Front face of pin insert shown
Insert Arrangement #12-35 / 13-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5
Insert Designation: 12-35 13-35 13-35 NA NA
Number of
Contacts Contact
Size Service
Rating
22 22D M
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
10
U
T
SR
P
NM
L
K
J
H
GFE
D
A
B
C
.113
.225
.252
.113
.260
.065
.130
.195.195
.130
.065
.260
F
E
D
A
B
C
.160
.138
.080
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #14S-6
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015
Insert Desi gnation: NA NA NA NA 14S-6
Number of
Contacts Contact
Size Service
Rating
616Inst.
Contact Locations
Front face of pin insert shown
Insert Arrangement #14-18 / 15-18
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015
Insert Desi g n ation: 14-18 15-18 15-18 14-18 NA
Number of
Contacts Contact
Size Service
Rating
18 20 I
All dimensions for reference only. For alternate rotations see pages 25 & 26
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
11
.065
C
B
A
E
D
F
G
J
H
U
T
L
K
N
M
VR
S
.225
.225
.065
.113
.113
.195
.260
.195
.260
.130 .130
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #14-19 / 15-19
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5 Number of
Contacts Contact
Size Service
Rating
Insert Desi g nation: 14-19 15-19 15-19 14-19 NA 19 20 I
Contact Hole Locations
Contact
Number Location
X Axis Y Axis
1+.045+.262
2+.123+.217
3+.211+.160
4+.254+.080
5 +.266 –.010
6 +.247 –.098
7 +.200 –.175
8 +.130 –.232
9 +.045 –.262
10 –.045 –.262
11 –.130 –.232
12 –.200 –.175
13 –.247 –.098
14 –.266 –.010
15 –.254 +.080
16 –.211 +.160
17 –.123 +.217
18 –.045 +.262
19 +.045 +.172
20 +.123 +.119
21 +.170 +.040
22 +.170 –.050
23 +.123 –.127
24 +.045 –.172
25 –.045 –.172
26 –.123 –.127
27 –.170 –.050
28 –.170 +.040
29 –.123 +.119
30 –.045 +.172
31 +.045 +.074
32 +.090 –.004
33 +.045 –.082
34 –.045 –.082
35 –.090 –.004
36 –.045 +.074
37 .000 –.004
Contact Hole Locations
Contact
Number Location
X Axis Y Axis
Contact Locations
Front face of pin insert shown
Insert Arrangement #14-35 / 15-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5 Number of
Contacts Contact
Size Service
Rating
Insert Desi g n ation: 14-35 15-35 15-35 NA NA 37 22D M
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult Amphenol
Corp Sidney NY
1
21
31
11
12
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #16S-1
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Desi gnation: NA NA NA NA 16S-1 7 16 A
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp Sidney NY
Contact Locations
Front face of pin insert shown
Insert Arrangement #16-26 / 17-26
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Desi g n ation: NA 17-26 17-26 16-26 NA 26 20 I
Contact Hole Locations
Contact
Number Location
X Axis Y Axis
A .000 +.321
B+.131+.293
C+.239+.214
D+.305+.099
E +.319 –.034
F +.278 –.161
G +.189 –.260
H +.067 –.314
J –.067 –.314
K –.189 –.260
L –.278 –.161
M –.319 –.034
N –.305 +.099
P –.239 +.214
R –.131 +.293
S –.070 +.177
T+.070+.177
U+.175+.094
V +.178 –.036
W +.119 –.151
X .000 –.203
Y –.119 –.151
Z –.178 –.036
a –.175 +.094
b .000 +.065
c .000 –.065
Contact Hole Locations
Contact
Number Location
X Axis Y Axis
F
E
A
B
G
CD
.095
.165
.190
F
E
AB
G
C
D
H
J
K
L
M
N
P
R
T
SU
V
W
X
Y
Z
ab
c
13
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #16-35 / 17-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5 Number of
Contacts Contact
Size Service
Rating
Insert Desi g n ation: 16-35 17-35 17-35 NA NA 55 22D M
Contact Hole Locations
Contact
Number Location
X Axis Y Axis
1 –.312 +.086
2 –.312 –.004
3 –.312 –.094
4 –.242 +.221
5 –.234 +.131
6 –.234 +.041
7 –.234 –.049
8 –.234 –.139
9 –.234 –.229
10 –.172 +.279
11 –.156 +.176
12 –.156 +.086
13 –.156 –.004
14 –.156 –.094
15 –.156 –.184
16 –.156 –.274
17 –.089 +.316
18 –.078 +.221
19 –.078 +.131
20 –.078 +.041
21 –.078 –.049
22 –.078 –.139
23 –.078 –.229
24 –.078 –.319
25 .000 +.329
26 .000 +.176
27 .000 +.086
28 .000 –.004
29 .000 –.094
30 .000 –.184
31 .000 –.274
32 +.089 +.316
33 +.078 +.221
34 +.078 +.131
35 +.078 +.041
36 +.078 –.049
37 +.078 –.139
38 +.078 –.229
39 +.078 –.319
40 +.172 +.279
41 +.156 +.176
42 +.156 +.086
43 +.156 –.004
44 +.156 –.094
45 +.156 –.184
46 +.156 –.274
47 +.242 +.221
48 +.234 +.131
49 +.234 +.041
50 +.234 –.049
51 +.234 –.139
52 +.234 –.229
53 +.312 +.086
54 +.312 –.004
55 +.312 –.094
Contact Hole Locations
Contact
Number Location
X Axis Y Axis
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
17
10
4
1
3
9
16
24 31
25 32
39
40
46
47
52
53
55
14
L
K
J
H
G
F
E
D
A
B
C
.105
.132
.092
.053
.179
.275
.215
.281
.260
.105
.250
J
H
G
F
ED
A
B
C
I
.240
.100
.240
.095
Contact Locations
Front face of pin insert shown
* Contact Locations B, C, F, G are Service Rating A.
All other contact lo cat ions are Servi ce Rating Inst.
Insert Arrangement #18-1
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating*
Insert Designation: NA NA NA NA 18-1 10 16 A/Inst.
Contact Locations
Front face of pin insert shown
Insert Arrangement #18-11 / 19-11
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Desi g n ation: 18-11 19-11 19-11 18-11 NA 11 16 II
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp Sidney NY
15
1
.357
.279
.201
.123
.045
.045
.090
.135
.180
.225
.270
.315
.360
410
17 23 34 43 51
58
64
66
63
57
50
42
33
24
16
9
3
U
T
S
R
P
N
g
f
M
L
KJH
G
F
E
D
h
A
B
C
a
b
c
e
d
V
W
X
Y
Z
j
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #18-32 / 19-32
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5 Number of
Contacts Contact
Size Service
Rating
Insert Desi g nation: 18-32 19-32 19-32 18-32 NA 32 20 I
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Contact Locations
Front face of pin insert shown
Insert Arrangement #18-35 / 19-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5 Number of
Contacts Contact
Size Service
Rating
Insert Desi g n ation: 18-35 19-35 19-35 NA NA 66 22D M
Contact Hole Locations
Contact
Letter Location
X Axis Y Axis
A+.066+.353
B+.189+.305
C+.286+.217
D+.345+.098
E +.357 –.033
F +.321 –.160
G +.242 –.265
H +.130 –.335
J .000 –.359
K –.130 –.335
L –.242 –.265
M –.321 –.160
N –.357 –.033
P –.345 +.098
R –.286 +.217
S –.189 +.305
T –.066 +.353
U .000 +.230
V+.124+.193
W+.209+.095
X +.228 –.033
Y +.174 –.151
Z +.065 –.221
a –.065 –.221
b –.174 –.151
c –.228 –.033
d –.209 +.095
e –.124 +.193
f .000 +.096
g +.096 .000
h .000 –.096
j –.096 .000
Contact Hole Locations
Contact
Letter Location
X Axis Y Axis
16
A
B
C
D
S
T
E
F
U
V
G
H
W
J
c
b
K
X
d
a
P
R
L
MY
Z
N
.275
.225
.125
.400
.150
.275
.300
.200
.050
.025
.100
.150
.250
.375
.150
.250
.400
.225
.100
.375 .400
E
B
M
L
C
F
H
G
N
DJ
A
K
.138
.102
.204
.156.276
.080
.239 .159
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #20-11
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Designation: NA NA NA NA 20-11 13 16 Inst.
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Contact Locations
Front face of pin insert shown
Insert Arrangement #20-27 / 21-27
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Desi g n ation: 20-27 21-27 NA 20-27 NA 27 20 I
17
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #20-35 / 21-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5 Number of
Contacts Contact
Size Service
Rating
Insert Desi g n ation: 20-35 21-35 21-35 NA NA 79 22D M
Contact Locations
Front face of pin insert shown
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
1+.053+.426
2+.146+.404
3+.232+.362
4+.306+.302
5+.365+.227
6+.406+.141
7+.427+.048
8 +.427 –.048
9 +.406 –.141
10 +.365 –.227
11 +.306 –.302
12 +.232 –.362
13 +.146 –.404
14 +.053 –.426
15 –.053 –.426
16 –.146 –.404
17 –.232 –.362
18 –.306 –.302
19 –.365 –.227
20 –.406 –.141
21 –.427 –.048
22 –.427 +.048
23 –.406 +.141
24 –.365 +.227
25 –.306 +.302
26 –.232 +.362
27 –.146 +.404
28 –.053 +.426
29 .000 +.323
30 +.098 +.322
31 +.184 +.280
32 +.258 +.220
33 +.311 +.141
34 +.332 +.048
35 +.332 –.048
36 +.311 –.141
37 +.258 –.220
38 +.184 –.280
39 +.098 –.322
40 .000 –.347
41 –.098 –.322
42 –.184 –.280
43 –.258 –.220
44 –.311 –.141
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
45 –.332 –.048
46 –.332 +.048
47 –.311 +.141
48 –.258 +.220
49 –.184 +.280
50 –.098 +.322
51 –.048 +.241
52 +.048 +.241
53 +.134 +.199
54 +.208 +.139
55 +.237 +.048
56 +.237 –.048
57 +.208 –.139
58 +.134 –.199
59 +.048 –.241
60 –.048 –.241
61 –.134 –.199
62 –.208 –.139
63 –.237 –.048
64 –.237 +.048
65 –.208 +.139
66 –.134 +.199
67 –.048 +.146
68 +.048 +.146
69 +.125 +.090
70 +.155 .000
71 +.125 –.090
72 +.048 –.146
73 –.048 –.146
74 –.125 –.090
75 –.155 .000
76 –.125 +.090
77 .000 +.053
78 +.048 –.029
79 –.048 –.029
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
1
31
79
61
41
21
11
71
51
18
T
G
H
M
L
J
FE
D
A
B
C
KU
S
V
N
P
R
.392
.168
.336
.294
.196
.098
U
T
S
R
P
N
g
f
MLK
J
H
G
F
E
D
s
h
i
j
V
WA
k
Y
B
C
m
Z
a
rn
t
qp
b
c
ed
X
.300 DIA.
.567 DIA.
.835 DIA.
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #20-41 / 21-41
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Desi g n ation: 20-41 21-41 21-41 20-41 NA 41 20 I
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications For availability of other arrangements consult
Contact Locations
Front face of pin insert shown
Insert Arrangement #22-14
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Desi g nation: NA NA NA NA 22-14 19 16 A
19
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #22-35 / 23-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5 Number of
Contacts Contact
Size Service
Rating
Insert Desi g nation: 22-35 23-35 23-35 NA NA 100 22D M
Contact Locations
Front face of pin insert shown
Contact Hole Locations
Contact
Number Location
X Axis Y Axis
1 –.428 +.241
2 –.467 +.154
3 –.488 +.061
4 –.415 .000
5 –.488 –.061
6 –.428 –.142
7 –.428 –.237
8 –.332 +.333
9 –.332 +.238
10 –.332 +.143
11 –.332 +.048
12 –.332 –.047
13 –.332 –.142
14 –.332 –.237
15 –.332 –.332
16 –.249 +.380
17 –.249 +.285
18 –.249 +.190
19 –.249 +.095
20 –.249 .000
21 –.249 –.095
22 –.249 –.190
23 –.249 –.285
24 –.249 –.380
25 –.166 +.428
26 –.166 +.333
27 –.166 +.238
28 –.166 +.143
29 –.166 +.048
30 –.166 –.047
31 –.166 –.142
32 –.166 –.237
33 –.166 –.332
34 –.166 –.427
35 –.083 +.475
36 –.083 +.380
37 –.083 +.285
38 –.083 +.190
39 –.083 +.095
40 –.083 .000
41 –.083 –.095
42 –.083 –.190
43 –.083 –.285
44 –.083 –.380
45 –.083 –.475
46 .000 +.428
47 .000 +.333
48 .000 +.238
49 .000 +.143
50 .000 +.048
51 .000 –.047
52 .000 –.142
53 .000 –.237
54 .000 –.332
55 .000 –.427
56 +.083 +.475
57 +.083 +.380
58 +.083 +.285
59 +.083 +.190
60 +.083 +.095
Contact Hole Locations
Contact
Number Location
X Axis Y Axis 61 +.083 .000
62 +.083 –.095
63 +.083 –.190
64 +.083 –.285
65 +.083 –.380
66 +.083 –.475
67 +.166 +.428
68 +.166 +.333
69 +.166 +.238
70 +.166 +.143
71 +.166 +.048
72 +.166 –.047
73 +.166 –.142
74 +.166 –.237
75 +.166 –.332
76 +.166 –.427
77 +.249 +.380
78 +.249 +.285
79 +.249 +.190
80 +.249 +.095
81 +.249 .000
82 +.249 –.095
83 +.249 –.190
84 +.249 –.285
85 +.249 –.380
86 +.332 +.333
87 +.332 +.238
88 +.332 +.143
89 +.332 +.048
90 +.332 –.047
91 +.332 –.142
92 +.332 –.237
93 +.332 –.332
94 +.428 +.241
95 +.467 +.154
96 +.488 +.061
97 +.415 .000
98 +.488 –.061
99 +.428 –.142
100 +.428 –.237
Contact Hole Locations
Contact
Number Location
X Axis Y Axis
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
95
97
96
100
98
99
93
85
76
66
5 5
4 5
3 4
2 4
15
7
6
5
4
3
2
1
8
16
25 35 4 6 56 67
77
86
94
20
B
Z
D
C
E
F
G
Y
X
W
p
V
U
T
n
Sm
AA qr
sa
b
DD t
EE
uc
H
d
v
w
e
J
K
L
f
g
M
FF
yCC
BB
GG
z
iHH
x
h
N
j
P
Rk
A
.260
.225
.112
.336
.065
.450
.195
.455
.325
.130
.390
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #22-55 / 23-55
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Desi g n ation: 22-55 23-55 23-55 22-55 NA 55 20 I
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications For availability of other arrangements consult
Contact Locations
Front face of pin insert shown
Insert Arrangement #24-5
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Desi g nation: NA NA NA NA 24-5 1 6 16 A
H
K
C
E
B
N
R
S
M
J
L
G
D
F
A
P
.067
.137
.270
.371
.176
.340
.035
.238
.168
.352
21
A
.474
.158
.316
.091
.273
.455
.182
.364
B
C
D
E
F
G
H
J
K
Y
Z
X
e
d
T
W
V
U
S
c
g
f
L
M
N
P
Q
b
a
R
.445
.267
.154
.308
.089
.356
.178
ZY
ABCD
EFGHJ
KLMNPQ
RSTUV
XW
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #24-28
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5 Number of
Contacts Contact
Size Service
Rating
Insert Designation: NA NA NA NA 24-28 24 16 Inst.
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications For availability of other arrangements consult
Contact Locations
Front face of pin insert shown
Insert Arrangement #24-31 / 25-31
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5 Number of
Contacts Contact
Size Service
Rating
Insert Desig nation: 24-31 NA NA 24-31 NA 31 16 I
22
1
815 25 36 48 59 71 82 94 105115
125
121
114
104
93
81
70
58
47
35
24
14
4
7
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #24-35 / 25-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Desi gnation: 24-35 25-35 25-35 NA NA 128 22D M
Contact Locations
Front face of pin insert shown
Contact Hole Locations
Contact
Number Location
X Axis Y Axis
1 –.479 +.279
2 –.520 +.190
3 –.546 +.095
4 –.555 .000
5 –.546 –.095
6 –.520 –.190
7 –.479 –.279
8 –.424 +.357
9 –.415 +.190
10 –.415 +.095
11 –.415 .000
12 –.415 –.095
13 –.415 –.190
14 –.424 –.357
15 –.332 +.444
16 –.332 +.332
17 –.332 +.237
18 –.332 +.142
19 –.332 +.047
20 –.332 –.047
21 –.332 –.142
22 –.332 –.237
23 –.332 –.332
24 –.332 –.427
25 –.249 +.496
26 –.249 +.380
27 –.249 +.285
28 –.249 +.190
29 –.249 +.095
30 –.249 .000
31 –.249 –.095
32 –.249 –.190
33 –.249 –.285
34 –.249 –.380
35 –.249 –.475
36 –.160 +.531
37 –.166 +.427
38 –.166 +.332
39 –.166 +.237
40 –.166 +.142
41 –.166 +.047
42 –.166 –.047
43 –.166 –.142
44 –.166 –.237
45 –.166 –.332
46 –.166 –.427
47 –.166 –.522
48 –.083 +.475
49 –.083 +.380
50 –.083 +.285
51 –.083 +.190
52 –.083 +.095
53 –.083 .000
54 –.083 –.095
55 –.083 –.190
56 –.083 –.285
57 –.083 –.380
58 –.083 –.475
59 .000 +.522
60 .000 +.427
61 .000 +.332
62 .000 +.237
63 .000 +.142
64 .000 +.047
65 .000 –.047
66 .000 –.142
67 .000 –.237
68 .000 –.332
69 .000 –.427
70 .000 –.555
71 +.083 +.475
72 +.083 +.380
73 +.083 +.285
74 +.083 +.190
75 +.083 +.095
76 +.083 .000
77 +.083 –.095
Contact Hole Locations
Contact
Number Location
X Axis Y Axis 78 +.083 –.190
79 +.083 –.285
80 +.083 –.380
81 +.083 –.475
82 +.160 +.531
83 +.166 +.427
84 +.166 +.332
85 +.166 +.237
86 +.166 +.142
87 +.166 +.047
88 +.166 –.047
89 +.166 –.142
90 +.166 –.237
91 +.166 –.332
92 +.166 –.427
93 +.166 –.522
94 +.249 +.496
95 +.249 +.380
96 +.249 +.285
97 +.249 +.190
98 +.249 +.095
99 +.249 .000
100 +.249 –.095
101 +.249 –.190
102 +.249 –.285
103 +.249 –.380
104 +.249 –.475
105 +.332 +.444
106 +.332 +.332
107 +.332 +.237
108 +.332 +.142
109 +.332 +.047
110 +.332 –.047
111 +.332 –.142
112 +.332 –.237
113 +.332 –.332
114 +.332 –.427
115 +.424 +.357
116 +.415 +.190
117 +.415 +.095
118 +.415 .000
119 +.415 –.095
120 +.415 –.190
121 +.424 –.357
122 +.479 +.279
123 +.520 +.190
124 +.546 +.095
125 +.555 .000
126 +.546 –.095
127 +.520 –.190
128 +.479 –.279
Contact Hole Locations
Contact
Number Location
X Axis Y Axis
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications For availability of other arrangements consult
23
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #24-61 / 25-61
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-501 5 Number of
Contacts Contact
Size Service
Rating
Insert Desi g nation: 24-61 25-61 25-61 24-61 NA 61 20 I
Contact Locations
Front face of pin insert shown
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
A+.196+.500
B+.314+.435
C+.413+.343
D+.485+.230
E+.527+.101
F +.536 –.030
G +.511 –.164
H +.454 –.287
J +.368 –.391
K +.259 –.470
L +.134 –.519
M .000 –.537
N –.134 –.519
P –.259 –.470
R –.368 –.391
S –.454 –.287
T –.511 –.164
U –.536 –.030
V –.527 +.101
W –.485 +.230
X –.413 +.343
Y –.314 +.435
Z –.196 +.500
a –.068 +.454
b+.068+.454
c+.173+.363
d+.285+.283
e+.362+.175
f+.399+.046
g +.392 –.088
h +.341 –.213
i +.251 –.314
j +.133 –.379
k .000 –.402
m –.133 –.379
n –.251 –.314
p –.341 –.213
q –.392 –.088
r –.399 +.046
s –.362 +.175
t –.285 +.283
u –.173 +.363
v .000 +.338
w+.147+.223
x+.237+.122
y +.267 –.010
z +.228 –.139
AA +.131 –.233
BB .000 –.267
CC –.131 –.233
DD –.228 –.139
EE –.267 –.010
FF –.237 +.122
GG –.147 +.223
HH .000 +.200
JJ +.105 +.094
KK +.135 –.041
LL .000 –.132
MM –.135 –.041
NN –.105 +.094
PP .000 .000
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
A
E
B
C
D
F
G
H
J
K
V
L
M
N
p
R
S
T
U
X
YZ
ab
W
c
d
e
j
k
m
f
h
i
r
g
q
s
t
uv
w
x
y
z
AA
BB
CC
DD
EE
FF
GG HH
MM
NN JJ
PP KK
LL
P
24
AB
CDEFG
HJK
VW
LMN
PRSTU
XYZac
defg
b
h
jk
lm
.552
.070 .089
.248
.092
.276
.368
.460
.229
.388
.547
.407
.509
.106
.184
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Contact Locations
Front face of pin insert shown
Insert Arrangement #28-15
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Serie s III MIL-C-26482
Series 1 & 2 MIL-5015 Nu mber of
Contacts Contact
Size Service
Rating
Insert Desi g nation: NA NA NA NA 28-15 35 16 A
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
25
5 LJT REF
NORMAL
ROTATION
LETTERS
C
DA
B
10 JT REF
NORMAL
ROTATION
LETTERS
C
DA
B
MAIN
KEYWAY
AR
BSC
DR
BSC
CR
BSC
BR
BSC
AB
AB
˚
˚
˚
˚
˚˚
Cylindrical Connectors with PCB contacts
alternate positioning available
for MIL-DTL-38999 connectors
LJT (MIL-DTL-38999 Series I) KEY/KEYWAY RO TATI ON
AB ANGLE OF ROTATION (Degrees)
Shell
Size Normal° A° B° C° D°
99577––113
11 95 81 67 123 109
13 95 75 63 127 115
15 95 74 61 129 116
17 95 77 65 125 113
19 95 77 65 125 113
21 95 77 65 125 113
23 95 80 69 121 110
25 95 80 69 121 110
JT (MIL-DTL-38999 Series II) KEY/KEYWAY ROTATION
AB ANGLE OF ROTATION (Degrees)
Shell
Size Normal° A° B° C° D°
8 100 82 – – 118
10 100 86 72 128 114
12 100 80 68 132 120
14 100 79 66 134 121
16 100 82 70 130 118
18 100 82 70 130 118
20 100 82 70 130 118
22 100 85 74 126 115
24 100 85 74 126 115
Tri-Start (MIL-DTL-38999 Series III) KEY/KEYWAY ROTATION
Shell
Size
Key & Keyway
Arrangement
Identification Letter AR°
BSC BR°
BSC CR°
BSC DR°
BSC
9
N 105 140 215 265
A 102 132 248 320
B 80 118 230 312
C 35 140 205 275
D 64 155 234 304
E 91 131 197 240
11, 13,
and 15
N 95 141 208 236
A 113 156 182 292
B 90 145 195 252
C 53 156 220 255
D 119 146 176 298
E 51 141 184 242
17 and
19
N 80 142 196 293
A 135 170 200 310
B 49 169 200 244
C 66 140 200 257
D 62 145 180 280
E 79 153 197 272
21, 23,
and 25
N 80 142 196 293
A 135 170 200 310
B 49 169 200 244
C 66 140 200 257
D 62 145 180 280
E
79
153
197
272
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of LJT connector receptacle shown)
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of JT connector receptacle shown)
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of Tri-Start connector receptacle shown)
To avoid c ros s- pl ugging pro bl em s in applicati ons requirin g t he use of more th an one conn ect or of the same series, si ze and arrange-
ment, alte rn at e rotations are availab le as i ndi c a ted i n t he accompanying cha rt s.
In MIL-DTL-38999 Series I, II and III connectors the rotation is based on rotating the master key/keyway in the connector shell.
A plug with a given rotation letter will mate with a receptacle with the same rotation letter. Only the master key/keyway rotates in the
shell, and the insert always remains in the same position relative to the minor keys. Refer to diagrams below for each connector series.
Explanation:
Use P at end of part number for pin
contacts in Normal position .
Use S at end of part number for
socket contacts in Normal position.
Use cross reference letters given in
chart above for alter na te rota tion s.
LJT & JT CONNECTORS
ALTERNATE ROTATION CROSS
REFERENCE LETTERS
Pins in
Alternate
Rotations
Sockets in
Alternate
Rotations
PA = E SA = F
PB = R SB = T
PC = W SC = X
PD = Y SD = Z
Explanation:
Use P at end of part number for pin
contacts in Normal position .
Use S at end of part number for
socket contacts in Normal position.
Use cross reference letters given in
chart above for alter na te rota tion s.
TRI-START CONNECTORS
ALTERNATE ROTATION CROSS
REFERENCE LETTERS
Pins in
Alternate
Rotations
Sockets in
Alternate
Rotations
PA = G SA = H
PB = I SB = J
PC = K SC = L
PD = M SD = N
PE = R SE = T
26
Cylindrical Connectors with PCB contacts
alternate positioning available
for MIL-C-26482 and MIL-5015 connectors
To avoid cross-plug gi ng problem s in applicati ons requirin g t he use of mor e th an one conn ect or of the same ser i es, si ze and arrange-
ment, alte rn at e ro t at io ns are available as indic at ed i n the accom panying char t s.
In MIL-C-26482 and MIL-501 5 con nectors the rotation is based on rotation of the in ser t within the connector.
A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The front face of the pin insert is rotated
within th e shell in a c lockw ise di rectio n from the n orm al shel l key. R efer t o diagr am b elow f or bo th M IL-C-2 648 2 and M IL-C -501 5 con-
nectors.
MIL-C-26482 INSERT ROTATION
Insert Rotation
Shell
Size Insert
Arrangement Degrees
WXYZ
8 8-3 60 210 – –
8 8-98––––
10 10-5 45 151 180 270
14 14-18 15 90 180 270
14 14-19 30 165 315 –
16 16-26 60 – 275 338
18 18-32 85 138 222 265
20 20-41 45 126 225 –
22 22-36 72 144 216 288
24 24-31 90 225 255 –
24 24-61 90 180 270 324
MIL-5015 INSERT ROTATION
Insert Rotation
Shell
Size Insert
Arrangement Degrees
WXYZ
1010SL-3––––
1414S-6––––
16 16S-1 80 – – 280
18 18-1 70 145 215 290
2020-11––––
22 22-14 80 110 250 280
24 24-28 80 110 250 280
28 28-15 80 110 250 280
Position W Position X Position Y Position Z
RELATIVE POSSIBLE POSITION
OF ROTATED INSERT
(front face of connector receptacle shown)
(MIL-C -2 64 82 and MIL-C - 50 15)
B
A
B
A
B
A
B
A
Explanation:
Use P at end of part number for pin contacts in
Normal position.
Use S at end of part number for socket con-
tacts in Normal position.
Use cross reference letters given in chart
above for inserts with alternate rotations.
MIL-26482 AND MIL-5015
CONNECTORS
ALTERNATE ROTATION CROSS
REFERENCE LETTERS
Pins in
Alternate Rotations Sockets in Alternate
Rotations
PW = G SW = H
PX = I SX = J
PY = K SY = L
PZ = M SZ = N
27
R
(TP)
S
S
R
(TP)
SS
T
(4 HOLES)
N
M
P
V
THREAD
L MAX
Z
PCB TAIL STICKOUT
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZE 20 & 22D
CONTACTS
.905 .006
.000
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmi um plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569701-35P designates shell size 9 with a 9-35 insert and pin
cont acts i n no r m al posi tion .
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other option s are available.
All dimensio ns f or ref ere nce only .
Shell
Size Part Number L
Max.
M
+.000
–.005 N
Dia.
P Max .
Panel
Thickness R
(TP)
S
+.011
–.010
T
Dia.
±.005
V Thread
Class 2A
(Plated)
SS Dia.
+.000
–.016
Z
Size
16 & 20
Contacts Size 22D
Contacts
9 88/91-569701-XXX .453 .820 .572 .234 .719 .938 .128 .4375-28 UNEF .662 .281 – .235 .249 – .188
11 702-XXX .453 .820 .700 .234 .812 1.031 .128 .5625-24 UNEF .810 .281 – .235 .249 – .188
13 703-XXX .453 .820 .850 .234 .906 1.125 .128 .6875-24 UNEF .960 .281 – .235 .249 – .188
15 704-XXX .453 .820 .975 .234 .969 1.219 .128 .8125-20 UNEF 1.085 .281 – .235 .249 – .188
17 705-XXX .453 .820 1.100 .234 1.062 1.312 .128 .9375-20 UNEF 1.210 .281 – .235 .249 – .188
19 706-XXX .453 .820 1.207 .234 1.156 1.438 .128 1.0625-18 UNEF 1.317 .281 – .235 .249 – .188
21 707-XXX .484 .790 1.332 .204 1.250 1.562 .128 1.1875-18 UNEF 1.442 .281 – .235 .249 – .188
23 708-XXX .484 .790 1.457 .204 1.375 1.688 .147 1.3125-18 UNEF 1.567 .281 – .235 .249 – .188
25 709-XXX .484 .790 1.582 .193 1.500 1.812 .147 1.4375-18 UNEF 1.692 .281 – .235 .249 – .188
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTPQ00R wall mounting receptacle
(back panel mounting)
+.005 DIA M
28
R
(TP)
S
S
R
(TP)
SS
N
M
P
V
THREAD
L MAX
Z
PCB TAIL STICKOUT
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZE 20 & 22D
CONTACTS
.905 .006
.000
T
THREAD
CLINCH NUT
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmi um plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for pins
in normal position, S for sockets in normal position. See page 25 for alternate rotation letter
to use.
Example part number: 88-628701-35P designates shell size 9 with a 9-35 insert and pin
cont acts i n no r m al posi tion .
• Z dimension is determin ed by contact ty pe in the insert arrangement.
• Most common options are shown; other options are available.
Shell
Size
Part Number
with
Clinch Nuts* L
Max.
M
+.000
–.005 N
Dia.
P Max.
Panel
Thickness R
(TP)
S
+.011
–.010 T
Thread
V Thread
Class 2A
(Plated)
SS Dia.
+.000
–.016
Z
Size
16 & 20
Contacts Size 22D
Contacts
9 88/91-628701-XXX .453 .820 .572 .234 .719 .938 .112-40UNJC-3B .4375-28 UNEF .662 .281 – .235 .249 – .188
11 702-XXX .453 .820 .700 .234 .812 1.031 .112-40UNJC-3B .5625-24 UNEF .810 .281 – .235 .249 – .188
13 703-XXX .453 .820 .850 .234 .906 1.125 .112-40UNJC-3B .6875-24 UNEF .960 .281 – .235 .249 – .188
15 704-XXX .453 .820 .975 .234 .969 1.219 .112-40UNJC-3B .8125-20 UNEF 1.085 .281 – .235 .249 – .188
17 705-XXX .453 .820 1.100 .234 1.062 1.312 .112-40UNJC-3B .9375-20 UNEF 1.210 .281 – .235 .249 – .188
19 706-XXX .453 .820 1.207 .234 1.156 1.438 .112-40UNJC-3B 1.0625-18 UNEF 1.317 .281 – .235 .249 – .188
21 707-XXX .484 .790 1.332 .204 1.250 1.562 .112-40UNJC-3B 1.1875-18 UNEF 1.442 .281 – .235 .249 – .188
23 708-XXX .484 .790 1.457 .204 1.375 1.688 .138-32UNJC-3B 1.3125-18 UNEF 1.567 .281 – .235 .249 – .188
25 709-XXX .484 .790 1.582 .193 1.500 1.812 .138-32UNJC-3B 1.4375-18 UNEF 1.692 .281 – .235 .249 – .188
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTPQ00R wall mounting receptacle
(back panel mounting) (with clinch nuts)
All dimensio ns for reference only .
* Consult Amphenol for more information on ordering connectors with clinch nuts. There is also a 3mm clinch nut available (part number 88/91-628401/409)
+.005 DIA M
29
P
Z
PCB TAIL STICKOUT
L MAX.
N
M
S
R
(TP)
SS
T
(4 HOLES)
KK
S
R
(TP)
.905 .006
.000
.001 DIA.
.019
FOR SIZE 20 &
22D CONTACTS
FOR SIZE 16 CONTACTS
.001 DIA.
.062
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569711-35P designates shell size 9 with a 9-35 insert and pin
cont acts i n no r m al pos ition .
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other option s are available.
Shell
Size Part Number L
Max.
M
+.000
–.005
N
+.001
–.005
P Max.
Panel
Thickness R
(TP)
S
+.011
–.010
T
Dia.
±.005
KK Dia.
+.006
–.005
SS Dia.
+.000
–.016
Z
Size
16 & 20
Contacts Size 22D
Contacts
9 88/91-569711-XXX .203 .820 .572 .234 .719 .938 .128 .433 .662 .454 – .401 .468 – .406
11 712- XXX .203 .820 .700 .2 34 .812 1.031 .128 .557 .810 .454 – .401 .468 – .406
13 713- XXX .203 .820 .850 .2 34 .906 1.125 .128 .676 .960 .454 – .401 .468 – .406
15 714-XXX .203 .820 .975 .234 .969 1.219 .128 .801 1.085 .454 – .401 .468 – .406
17 715-XXX .203 .820 1.100 .234 1.062 1.312 .128 .926 1.210 .454 – .401 .468 – .406
19 716-XXX .203 .820 1.207 .234 1.156 1.438 .128 1.032 1.317 .454 – .401 .468 – .406
21 717-XXX .234 .790 1.332 .204 1.250 1.562 .128 1.157 1.442 .454 – .401 .468 – .406
23 718-XXX .234 .790 1.457 .204 1.375 1.688 .147 1.282 1.567 .454 – .401 .468 – .406
25 719-XXX .234 .790 1.582 .193 1.500 1.812 .147 1.407 1.692 .454 – .401 .468 – .406
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTP02R box mounting receptacle
(back panel mounting)
+.005 DIA M
All dimensio ns f or ref ere nce only .
30
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmi um plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-628701-35P designates shell size 9 with a 9-35 insert and pin
cont acts i n no r m al posi tion .
• Z dimension is determin ed by contact ty pe in the insert arrangement.
• Most common options are shown; other options are available.
Shell
Size
Part Number
with
Clinch Nuts L
Max.
M
+.000
–.005
N
+.001
–.005
P Max.
Panel
Thickness R
(TP)
S
+.011
–.010 T
Thread
KK Dia.
+.006
–.005
SS Dia.
+.000
–.016
Z
Size
16 & 20
Contacts Size 22D
Contacts
9 88/91-628711-XXX .203 .820 .572 .234 .719 1.031 .112-40UNJC-3B .433 .662 .454 – .401 .468 – .406
11 712-XXX .203 .820 .700 .234 .812 1.125 .112-40UNJC-3B .557 .810 .454 – .401 .468 – .406
13 713-XXX .203 .820 .850 .234 .906 1.172 .112-40UNJC-3B .676 .960 .454 – .401 .468 – .406
15 714-XXX .203 .820 .975 .234 .969 1.281 .112-40UNJC-3B .801 1.085 .454 – .401 .468 – .406
17 715-XXX .203 .820 1.100 .234 1.062 1.375 .112-40UNJC-3B .926 1.210 .454 – .401 .468 – .406
19 716-XXX .203 .820 1.207 .234 1.156 1.469 .112-40UNJC-3B 1.032 1.317 .454 – .401 .468 – .406
21 717-XXX .234 .790 1.332 .204 1.250 1.625 .112-40UNJC-3B 1.157 1.442 .454 – .401 .468 – .406
23 718-XXX .234 .790 1.457 .204 1.375 1.750 .138-32UNJC-3B 1.282 1.567 .454 – .401 .468 – .406
25 719-XXX .234 .790 1.582 .193 1.500 1.875 .138-32UNJC-3B 1.407 1.692 .454 – .401 .468 – .406
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTP02R box mounting receptacle
(back panel mounting) (with clinch nuts)
All dimensio ns for reference only .
* Consult Amphenol for more information on ordering connectors with clinch nuts. There is also a 3mm clinch nut available (part number 88/91-628410/419)
T
THREAD
CLINCH NUT
P
Z
PCB TAIL STICKOUT
L MAX.
N
M
S
R
(TP)
SS
KK
S
R
(TP)
.905 .006
.000
.001 DIA.
.019
FOR SIZE 20 &
22D CONTACTS
FOR SIZE 16 CONTACTS
.001 DIA.
.062
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
+.005 DIA M
31
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmi um plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569721-35P designates shell size 9 with a 9-35 insert and pin
cont acts i n no r m al posi tion .
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other option s are available.
All dimensio ns for reference only .
Shell
Siz e P a r t Nu m b e r
A*
+.000
–.010 C
Max.
H Hex
+.017
–.016 L
Max.
N
+.001
–.005 S
±.016
T*
+.010
–.000
V Thread
Class 2A
(Plated)
RR Thread
Class 2A
(Plated)
Z
Size
16 & 20
Contacts Size 22D
Contacts
9 88/91-569721-XXX .669 1.199 .875 .625 .572 1.062 .697 .4375-28 UNEF .6875-24 UNEF .229 – .175 .243 – .182
11 722-XXX .769 1.386 1.000 .625 .700 1.250 .822 .5625-24 UNEF .8125-20 UNEF .229 – .175 .243 – .182
13 723-XXX .955 1.511 1.188 .625 .850 1.375 1.007 .6875-24 UNEF 1.0000-20 UNEF .229 – .175 .243 – .182
15 724-XXX 1.084 1.636 1.312 .625 .975 1.500 1.134 .8125-20 UNEF 1.1250-18 UNEF .229 – .175 .243 – .182
17 725-XXX 1.208 1.761 1.438 .625 1.100 1.625 1.259 .9375-20 UNEF 1.2500-18 UNEF .229 – .175 .243 – .182
19 726-XXX 1.333 1.949 1.562 .656 1.207 1.812 1.384 1.0625-18 UNEF 1.3750-18 UNEF .207 – .158 .221 – .165
21 727-XXX 1.459 2.073 1.688 .750 1.332 1.938 1.507 1.1875-18 UNEF 1.5000-18 UNEF .207 – .158 .221 – .165
23 728-XXX 1.580 2.199 1.812 .750 1.457 2.062 1.634 1.3125-18 UNEF 1.6250-18 UNEF .207 – .158 .221 – .165
25 729-XXX 1.709 2.323 2.000 .750 1.582 2.188 1.759 1.4375-18 UNEF 1.7500-18 UNS .207 – .158 .221 – .165
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJT07R jam nut receptacle
★.059 dia. min. 3 lockwire holes.
Formed lockwire hole design (6 holes) is optional.
* “D” shaped mounting hole dimensio ns
C
T
H
S
N
A*
RR
THREAD
.328 MAX.
Z
PCB TAIL STICKOUT
.062 .001 DIA.
FOR SIZE 16 CONTACT
.019 .001 DIA.
FOR SIZE 20 & 22D
CONTACTS
V THREAD
.062 MIN.
.125 MAX PANEL THICKNESS
.915 .005
32
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmi um plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569731-35P designates shell size 8 with a 8-35 insert and pin
cont acts i n no r m al posi tion .
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other option s are available.
All dimensio ns f or ref ere nce only .
Shell
Size Part Number
N
+.001
–.005
P Max.
Panel
Thickness R
(TP) S
±.016
T
Dia.
±.005
V Thread
Class 2A
(Plated)
AD
Dia.
±.005
SS Dia.
+.000
–.016
Z
Size
16 & 20
Contacts Size 22D
Contacts
8 88/91-569731-XXX .473 .142 .594 .812 .120 .4375-28 UNEF .516 .563 .257 – .200 .268 – .178
10 732-XXX .590 .142 .719 .938 .120 .56 25-24 UNEF .633 .680 .257 – .200 .268 – .178
12 733-XXX .750 .142 .812 1.031 .120 .6875-24 UNEF .802 .859 .25 7 – .200 .268 – .17 8
14 734-XXX .875 .142 .906 1.125 .120 .8125-20 UNEF .927 .984 .25 7 – .200 .268 – .17 8
16 735-XXX 1.000 .142 .969 1.219 .120 .9375-20 UNEF 1.052 1.108 .257 – .200 .268 – .178
18 736-XXX 1.125 .142 1.062 1.312 .120 1.0625-18 UNEF 1.177 1.233 .257 – .200 .268 – .178
20 737-XXX 1.250 .142 1.156 1.438 .120 1.1875-18 UNEF 1.302 1.358 .257 – .200 .268 – .178
22 738-XXX 1.375 .142 1.250 1.562 .120 1.3125-18 UNEF 1.427 1.483 .257 – .200 .268 – .178
24 739-XXX 1.500 .142 1.375 1.688 .147 1.4375-18 UNEF 1.552 1.610 .257 – .200 .268 – .178
MIL-DTL-38999 Series II Type Connectors
with PCB contacts
JTPQ00R wall mounting receptacle
(back panel mounting)
+.005 DIA M
T
4 HOLES
Z
PCB TAIL STICKOUT
V THREAD
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
P
PANEL
THICKNESS
.000
.005
.447
.438 MAX
AD N
R
(TP) S
S
SS
R
(TP)
.000
.005
.322
33
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add inse rt arra ngement to end of number. Refer t o inse rt av ailabilit y c hart on page 4 a nd
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569741-35P designates shell size 8 with a 8-35 insert and pin
cont acts i n no r m al pos ition .
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other option s are available.
All dimensio ns for reference only .
Shell
Size Part Number L
Max.
N
+.001
–.005
P Max .
Panel
Thickness R
(TP) S
±.016
T
Dia.
±.005
AD
Dia.
±.005
KK
Dia.
Max.
Z
Size
16 & 20
Contacts Size 22D
Contacts
8 88/91-569741-XXX .225 .473 .147 .594 .812 .120 .516 .531 .455 – .403 .466 – .409
10 742-XXX .225 .590 .152 .719 .938 .120 .633 .656 .455 – .403 .466 – .409
12 743-XXX .225 .750 .152 .812 1.031 .120 .802 .828 .455 – .403 .466 – .409
14 744-XXX .225 .875 .152 .906 1.125 .120 .927 .953 .455 – .403 .466 – .409
16 745-XXX .225 1.000 .152 .969 1.219 .120 1.052 1.078 .455 – .403 .466 – .409
18 746-XXX .225 1.125 .152 1.062 1.312 .120 1.177 1.203 .455 – .403 .466 – .409
20 747-XXX .225 1.250 .179 1.156 1.438 .120 1.302 1.328 .455 – .403 .466 – .409
22 748-XXX .225 1.375 .179 1.250 1.562 .120 1.427 1.453 .455 – .403 .466 – .409
24 749-XXX .225 1.500 .169 1.375 1.688 .147 1.552 1.578 .455 – .403 .466 – .409
MIL-DTL-38999 Series II Type Connectors
with PCB contacts
JTP02R box mounting receptacle
(back panel mounting)
+.005 DIA M
T
4 HOLES
R
(TP) S
S
R
(TP) P
PANEL THICKNESS
AD N
.000
.005
.322
.000
.005
.447
.505 .006
.000
KK
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
L
Z
PCB TAIL STICKOUT
34
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmi um plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569751-35P designates shell size 8 with a 8-35 insert and pin
contacts in norm a l position .
• Z dimension is determin ed by contact ty pe in the insert arrangement.
• Most common options are shown; other options are available.
All dimensio ns for reference only .
Shell
Siz e P a r t Nu m ber
A*
+.000
–.010 C
Max.
H Hex
+.017
–.016 L
Max. M
±.005
N
+.001
–.005 S
±.016
T*
+.010
–.000
V Thread
Class 2A
(Plated)
RR Thread
Class 2A
(Plated)
Z
Size
16 & 20
Contacts Size 22D
Contacts
8 88/91-569751-XXX .830 1.390 1.062 .453 .438 .473 1.250 .884 .4375-28 UNEF .8750-20 UNEF .272 – .200 .283 – .178
10 752-X XX .955 1.515 1.188 .453 .438 .590 1.375 1.007 .5625-24 UNEF 1.0000-20 UNEF .272 – .200 .283 – .178
12 753-XXX 1.084 1.640 1.312 .453 .438 .750 1.500 1.134 .6875-24 UNEF 1.1250-18 UNEF .272 – .200 .283 – .178
14 754-XXX 1.208 1.765 1.438 .453 .438 .875 1.625 1.259 .8125-20 UNEF 1.2500-18 UNEF .272 – .200 .283 – .178
16 755-XXX 1.333 1.953 1.562 .453 .438 1.000 1.781 1.384 .9375-20 UNEF 1.3750-18 UNEF .272 – .200 .283 – .178
18 756-XXX 1.459 2.031 1.688 .453 .438 1.125 1.890 1.507 1.0625-18 UNEF 1.5000-18 UNEF .272 – .200 .283 – .178
20 757-XXX 1.576 2.156 1.812 .422 .464 1.250 2.016 1.634 1.1875-18 UNEF 1.6250-18 UNEF .272 – .200 .283 – .178
22 758-XXX 1.701 2.280 2.000 .422 .464 1.375 2.140 1.759 1.3125-18 UNEF 1.7500-18 UNS .272 – .200 .283 – .178
24 759-XXX 1.826 2.405 2.125 .422 .464 1.500 2.265 1.884 1.4375-18 UNEF 1.8750-16 UN .272 – .200 .283 – .178
MIL-DTL-38999 Series II Type Connectors
with PCB contacts
JT07R jam nut receptacle
★.059 dia. min. 3 lockwire holes.
Formed lockwire hole design (6 holes) is optional.
* “D” shaped mounting hole dimensio ns
H
C
T*
S (2 PLACES)
N
RR
THREAD
L
.062 ± .001 DIA. FOR SIZE 16 CONTACTS
.019 ± .001 DIA.
FOR SIZES 20 & 22D CONTACTS
Z
PCB TAIL STICKOUT
M
.094
.062 MIN.
.109 MAX. PANEL THICKNESS
V THREAD
+ .011
– .010
35
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmi um plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569761-35P designates shell size 9 with a 9-35 insert and pin
cont acts i n no r m al posi tion .
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
Shell
Size Part Number
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS L
Max.
M
+.000
–.005 R1R2S
Max.
T
+.008
–.006
V
Thread
Metric
AA
Max.
Panel
Thickness
LL
+.006
–.000
TT
+.008
–.006
Z
Size
16 & 20
Contacts Si ze 22D
Contacts
9 88/91-569761-XXX .6250 .469 .820 .719 .594 .948 .128 M12X1-6g .234 .905 .216 .228–.178 .242–.181
11 762-XXX .7500 .469 .820 .812 .719 1.043 .128 M15X1-6g .234 .905 .194 .228–.178 .242–.181
13 763-XXX .8750 .469 .820 .906 .812 1.137 .128 M18X1-6g .234 .905 .194 .228–.178 .242–.181
15 764-XXX 1.0000 .469 .820 .969 .906 1.232 .128 M22X1-6g .234 .905 .173 .228–.178 .242–.181
17 765-XXX 1.1875 .469 .820 1.062 .969 1.323 .128 M25X1-6g .234 .905 .194 .228–.178 .242–.181
19 766-XXX 1.2500 .469 .820 1.156 1.062 1.449 .128 M28X1-6g .234 .905 .194 .228–.178 .242–.181
21 767-XXX 1.3750 .500 .790 1.250 1.156 1.575 .128 M31X1-6g .204 .905 .194 .228–.178 .242–.181
23 768-XXX 1.5000 .500 .790 1.375 1.250 1.701 .154 M34X1-6g .204 .905 .242 .228–.178 .242–.181
25 769-XXX 1.6250 .500 .790 1.500 1.375 1.823 .154 M37X1-6g .204 .905 .242 .228–.178 .242–.181
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP00R wall mounting receptacle
(back panel mounting)
Composite Series III connectors are available;
consult Amph eno l , Sidn ey, NY.
Designates true position dimensioning
† Red band indica tes full y mate d
†† Blue band indicates rear release contact
retention system
R1
R2
S
2 PLACES
2 PLACES
2 PLACES
4 PLACES
4 PLACES
.005 M
V THREAD
B
THREAD
Z
PCB TAIL STICKOUT
L
AA
M
LL
.062
.001 DIA.
FOR SIZE 16 CONTACTS
.019
RED
BAND
BLUE
BAND
1.240 MAX.
TT
T
.001 DIA.
FOR SIZE 20 & 22D CONTACTS
All dimensio ns for reference only .
36
R
S
2 PLACES
2 PLACES
V THREAD
B
THREAD
Z
PCB TAIL STICKOUT
L
AA
M
LL
.062
.001 DIA.
FOR SIZE 16 CONTACTS
.019
RED
BAND
BLUE
BAND
1.240 MAX.
.001 DIA.
FOR SIZE 20 & 22D CONTACTS
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
T
THREAD
CLINCH NUT
.005
M
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmi um plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-628741-35P designates shell size 9 with a 9-35 insert and pin
cont acts i n no r m al posi tion .
• Z dimension is determin ed by contact ty pe in the insert arrangement.
• Most common options are shown; other options are available.
Shell
Size
Part Number
with
Clinch Nut s
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS L
Max.
M
+.000
–.005 R S
Max. T
Thread
V
Thread
Metric
AA
Max.
Panel
Thickness
LL
+.006
–.000
Z
Size
16 & 20
Contacts Size 22D
Contacts
9 88/91-628741-XXX .6250 .469 .820 .719 1.094 .112-40UNC-3B M12X1-6g .234 .905 .228–.178 .242–.181
11 742-XXX .7500 .469 .820 .812 1.187 .112-40UNC-3B M15X1-6g .234 .905 .228–.178 .242–.181
13 743-XXX .8750 .469 .820 .906 1.281 .112-40UNC-3B M18X1-6g .234 .905 .228–.178 .242–.181
15 744-XXX 1.0000 .469 .820 .969 1.344 .112-40UNC-3B M22X1-6g .234 .905 .228–.178 .242–.181
17 745-XXX 1.1875 .469 .820 1.062 1.437 .112-40UNC-3B M25X1-6g .234 .905 .228–.178 .242–.181
19 746-XXX 1.2500 .469 .820 1.156 1.531 .112-40UNC-3B M28X1-6g .234 .905 .228–.178 .242–.181
21 747-XXX 1.3750 .500 .790 1.250 1.625 .112-40UNC-3B M31X1-6g .204 .905 .228–.178 .242–.181
23 748-XXX 1.5000 .500 .790 1.375 1.750 .138-32UNC-3B M34X1-6g .204 .905 .228–.178 .242–.181
25 749-XXX 1.6250 .500 .790 1.500 1.875 .138-32UNC-3B M37X1-6g .204 .905 .228–.178 .242–.181
All dimensions for refere nce only.
* Consult Amphenol for more information on ordering connectors with clinch nuts.
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP00R wall mounting receptacle
(back panel mounting) (with clinch nuts)
Composite Series III connectors are available;
consult Amph eno l , Sidn ey, NY.
Designates true position dimensioning
† Red band indica tes full y mate d
†† Blue band indicates rear release contact
retention system
37
B
THREAD
Z
PCB TAIL STICKOUT
ZZ
L
AA
M
LL
RED
BAND
BLUE
BAND
R1
R2
S
2 PLACES
2 PLACES
2 PLACES
4 PLACES
4 PLACES
.005
M
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
T
TT
HOW TO ORDER
• Order by app licable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer t o ins ert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569771-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
All dimensio ns f or ref ere nce only .
Shell
Size Part Number
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS L
Max.
M
+.000
–.005 R1R2S
Max.
T
+.008
–.006
AA
Max.
Panel
Thickness
LL
+.006
–.000
TT
+.008
–.006
Z
Size
16 & 20
Contacts Si ze 22D
Contacts
9 88/91-569771-XXX .6250 .205 .820 .719 .594 .948 .128 .234 .905 .216 .460–.375 .471–.399
11 772-XXX .7500 .205 .820 .812 .719 1.043 .128 .234 .905 .194 .460–.375 .471–.399
13 773-XXX .8750 .205 .820 .906 .812 1.137 .128 .234 .905 .194 .460–.375 .471–.399
15 774-XXX 1.0000 .205 .820 .969 .906 1.232 .128 .234 .905 .173 .460–.375 .471–.399
17 775-XXX 1.1875 .205 .820 1.062 .969 1.323 .128 .234 .905 .194 .460–.375 .471–.399
19 776-XXX 1.2500 .205 .820 1.156 1.062 1.449 .128 .234 .905 .194 .460–.375 .471–.399
21 777-XXX 1.3750 .235 .790 1.250 1.156 1.575 .128 .204 .905 .194 .460–.375 .471–.399
23 778-XXX 1.5000 .235 .790 1.375 1.250 1.701 .154 .204 .905 .242 .460–.375 .471–.399
25 779-XXX 1.6250 .235 .790 1.500 1.375 1.823 .154 .204 .905 .242 .460–.375 .471–.399
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP02R box mounting receptacle
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
Desi gnates true position di mensioning
† Red band indicates fully mated
†† Blue band indicates rear release contact
retention system
38
B
THREAD
Z
PCB TAIL STICKOUT
.162 – .072
FOR SIZE 16 & 20 CONTACTS
.150 – .022
FOR SIZE 22D CONTACTS
L
AA
M
LL
RED
BAND
BLUE
BAND
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
T
THREAD
CLINCH NUT
R
S
2 PLACES
2 PLACES
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
.005
M
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangemen t to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-628751-35P designates shell size 9 with a 9-35 insert and pin
contact s in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
Shell
Size
Part Number
with
Clinch Nut s
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS L
Max.
M
+.000
–.005 R S
Max. T
Thread
AA
Max.
Panel
Thickness
LL
+.006
–.000
Z
Size
16 & 20
Contacts Size 22D
Contacts
9 88/91-628751-XXX .6250 .205 .820 .719 1.031 .112-40UNC-3B .234 .905 .460–.375 .471–.399
11 752-XXX .7500 .205 .820 .812 1.125 .112-40UNC-3B .234 .905 .460–.375 .471–.399
13 753-XXX .8750 .205 .820 .906 1.172 .112-40UNC-3B .234 .905 .460–.375 .471–.399
15 754-XXX 1.0000 .205 .820 .969 1.281 .112-40UNC-3B .234 .905 .460–.375 .471–.399
17 755-XXX 1.1875 .205 .820 1.062 1.375 .112-40UNC-3B .234 .905 .460–.375 .471–.399
19 756-XXX 1.2500 .205 .820 1.156 1.469 .112-40UNC-3B .234 .905 .460–.375 .471–.399
21 757-XXX 1.3750 .235 .790 1.250 1.562 .112-40UNC-3B .204 .905 .460–.375 .471–.399
23 758-XXX 1.5000 .235 .790 1.375 1.750 .138-32UNC-3B .204 .905 .460–.375 .471–.399
25 759-XXX 1.6250 .235 .790 1.500 1.875 .138-32UNC-3B .204 .905 .460–.375 .471–.399
All dimensions for reference only.
* Consult Amphenol for more information on ordering connectors with clinch nuts.
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP02R box mounting receptacle
(wit h clin ch nuts )
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
Desi gnates true position di mensioning
† Red band indicates fully mated
†† Blue band indicates rear release contact
retention system
39
HOW TO ORDER
• Order by ap plicable 88/91 part number in table below.
88 prefix designates olive drab cadmi um plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add inse rt arra ngement to end of number. Refer t o inse rt av ailabilit y c hart on page 4 a nd
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rota-
tion letter to use.
Example part number: 88-569781-35P designates shell size 9 with a 9-35 insert and pin
cont acts i n no r m al posi tion .
• Z dimension is determin ed by contact ty pe in the insert arrangement.
• Most common options are shown; other options are available.
All dimensio ns for reference only .
Shell
Size Part Number
A*
+.000
–.000
B Thread
Class 2A (Plated)
0.1P-0.3L-TS C
Max.
H Hex
+.017
–.016 S
±.010
T
+.010
–.000 V Thread
Metric
Z
Size
16 & 20
Contacts Size 22D
Contacts
9 88/91-569781-XXX .669 .6250 1.199 .875 1.062 .697 M12X1-6g .244 – .200 .258 – .206
11 782-XXX .769 .7500 1.386 1.000 1.250 .822 M15X1-6g .244 – .200 .258 – .206
13 783-XXX .955 .8750 1.511 1.188 1.375 1.007 M18X1-6g .244 – .200 .258 – .206
15 784-XXX 1.084 1.0000 1.636 1.312 1.500 1.134 M22X1-6g .244 – .200 .258 – .206
17 785-XXX 1.208 1.1875 1.761 1.438 1.625 1.259 M25X1-6g .244 – .200 .258 – .206
19 786-XXX 1.333 1.2500 1.949 1.562 1.812 1.384 M28X1-6g .222 – .177 .236 – .180
21 787-XXX 1.459 1.3750 2.073 1.688 1.938 1.507 M31X1-6g .222 – .177 .236 – .180
23 788-XXX 1.575 1.5000 2.199 1.812 2.062 1.634 M34X1-6g .222 – .177 .236 – .180
25 789-XXX 1.709 1.6250 2.323 2.000 2.188 1.759 M37X1-6g .222 – .177 .236 – .180
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TV07R jam nut receptacle
Composite Series III connectors are available;
consult Amph eno l , Sidn ey, NY.
† Red band indica tes full y mate d
†† Blue band indicates rear release contact
retention syste m
★.059 dia. min. 3 lockwire holes.
Formed lockwire hole design (6 holes) is optional.
* “D” shaped mounting hole dimensio ns
C
S
2 PLACES
H
PANEL THICKNESS
.062 MIN.
.125 MAX.
B THREAD
1.280 MAX.
V THREAD
.062 .001 DIA. FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 & 22D CONTACTS
BLUE
BAND
Z PCB TAIL STICKOUT
.378 MAX.
RED
BAND
40
E
C DIA.
AR
(TP)
R
(TP)
J
DIA.
45
°
TYP
B DIA.
SPANNER
NUT ADAPTER
4 HOLES
#6-32 UNC-2B
THREAD (PLATED)
.002
M
F
V THREAD L
T
Stand-off Adapter
for use with 38999 PCB connectors
Amphenol’s stand-off adapter and spanner nut assembly allows any MIL-DTL-
38999 jam nut receptac le to support PCB con tacts and may el iminate the need
for special stand-off shell design. Consult Amphenol for more information.
• HOW TO ORDER
• Order by applicable 10- part number in table below.
Last digit designates finis h - see finish table.
Shell
Size Part Number A
± .003 B Dia.
± .003
C Dia.
+.005
–.001 E
±.005
J Dia.
+.005
–.000 L
±.003
V Thread
Metric
Plated T*
±.002
9 10-658266-01( ) 1.062 1.188 .750 .200 .625 .150 M12X1-6H .250
11 10-658266-02( ) 1.250 1.375 .900 .200 .744 .150 M15X1-6H .250
13 10-658266-03( ) 1.375 1.500 .975 .200 .862 .150 M18X1-6H .250
15 10-658266-04( ) 1.500 1.625 1.125 .200 1.019 .150 M22X1-6H .250
17 10-658266-05( ) 1.625 1.750 1.250 .200 1.137 .150 M25X1-6H .250
19 10-658266-06( ) 1.812 1.938 1.375 .200 1.255 .150 M28X1-6H .250
21 10-658266-07( ) 1.938 2.062 1.469 .200 1.373 .150 M31X1-6H .250
23 10-658266-08( ) 2.062 2.188 1.625 .200 1.492 .150 M34X1-6H .250
25 10-658266-09( ) 2.188 2.312 1.750 .200 1.610 .150 M37X1-6H .250
All dimensions for refere nce only.
* For information on additional ‘T’ dimension lengths, consult Amphenol.
Tri-Start MIL- DTL-38999 Jam Nu t
Connector with Stand-off Adapter
**Other finishes available; consult
Amphenol for further information.
FINISH DATA**
Suffix
Designation Description
9Olive drab cadmium
plate, nickel base plate
G Electroless nickel plate
41
HOW TO ORDER
• Order by applicable 71 part number in table be low.
71 prefix designates olive drab cadmium plated connector shell.
(For availab ility of other finishes consult Amph enol, Sidney, NY)
• Add insert arrangement to end of number. Refer to insert availability chart on
page 4 and pin-out illustrations on pages 5-24. Last letter of part number desig-
nates r otat ion; P for p ins in n ormal pos iti on, S f or soc kets in no rmal pos iti on. See
page 26 for alternate rot ation letter to use.
Example part number: 71-570121-98P designates shell size 8 with a 8-98 insert
and pin cont acts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other option s are available.
All dimensio ns for reference only .
Shell
Size Part Number
A
+.001
–.005
K
+.021
–.010 L
Max.
M
+.010
–.000
N
Dia.
Max. R
(TP)
S
+.011
–.010
Z
+.040
–.050
Size 16 & 20
Contacts
6 71-570120-XXX .348 .493 .825 .431 .323 .469 .688 .380
8 71-570121-XXX .473 .493 .825 .431 .449 .594 .812 .380
10 71-570122-XXX .590 .493 .825 .431 .573 .719 .938 .380
12 71-570123-XXX .750 .493 .825 .431 .699 .812 1.031 .380
14 71-570124-XXX .875 .493 .825 .431 .823 .906 1.125 .380
16 71-570125-XXX 1.000 .493 .825 .431 .949 .969 1.219 .380
18 71-570126-XXX 1.125 .493 .825 .431 1.073 1.062 1.312 .380
20 71-570127-XXX 1.250 .650 1.076 .556 1.199 1.156 1.438 .286
22 71-570128-XXX 1.375 .650 1.076 .556 1.323 1.250 1.562 .286
24 71-570129-XXX 1.500 .683 1.109 .589 1.449 1.375 1.688 .253
MIL-C-26482 Series 1 Type Connectors
with PCB contacts
PT02 box mounting receptacle
(MMC) located within .0025 of (TP)
.030 .001 DIA.
FOR SIZE 16 & 20
CONTACTS
M
L
A
KZ
PCB TAIL STICKOUT
S
R
(TP)
R
(TP) S
.120 .005 DIA.
(.147 .005 DIA. SIZE 24)
4 HOLES
N
42
HOW TO ORDER
• Order by applicable 71 part number in table below.
71 prefix designates olive drab cadmi um plated connector shell.
(For availab ility of other finishes consult Amph enol, Sidney, NY)
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in nor mal p osit ion, S f or sock ets in nor mal p osit ion. See page 26 for a lterna te rotat ion
letter to use.
Example part number: 71-533721-98P designates shell size 8 with a 8-98 insert and pin
cont acts i n no r m al posi tion .
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other option s are available.
All dimensio ns f or ref ere nce only .
Shell
Size Part Number
A Dia.
+.001
–.005
H
+.017
–.016
J Flat
+.000
–.010
K
+.011
–.010 M
±.010
P Panel
Thickness R
Thread
Class 2A S
±.010
Z
+.025
–.035
Min. Max. Size 16 & 20
Contacts
6 71-533720-XXX .348 .625 .405 .125 .696 .062 .125 .4375-28 UNEF .812 .376
8 71-533721-XXX .473 .750 .530 .125 .696 .062 .125 .5625-24 UNEF .938 .376
10 71-533722-XXX .590 .875 .655 .125 .696 .062 .125 .6875-24 UNEF 1.062 .376
12 71-533723-XXX .750 1.062 .818 .125 .696 .062 .125 .8750-20 UNEF 1.250 .376
14 71-533724-XXX .875 1.188 .942 .125 .696 .062 .125 1.0000-20 UNEF 1.375 .376
16 71-533725-XXX 1.000 1.312 1.066 .125 .696 .062 .125 1.1250-18 UNEF 1.500 .376
18 71-533726-XXX 1.125 1.438 1.191 .125 .696 .062 .125 1.2500-18 UNEF 1.625 .376
20 71-533727-XXX 1.250 1.562 1.316 .156 .884 .062 .250 1.3750-18 UNEF 1.812 .367
22 71-533728-XXX 1.375 1.688 1.441 .156 .884 .062 .250 1.5000-18 UNEF 1.938 .367
24 71-533729-XXX 1.500 1.816 1.566 .156 .917 .062 .250 1.6250-18 UNEF 2.062 .334
MIL-C-26482 Series 1 Type Connectors
with PCB contacts
PT07 jam nut receptacle
All lockwire holes are .044 dia. min.
S
H
S
M
K
P
R THREAD
Z
PCB TAIL STICK OUT
.030 .001 DIA.
FOR SIZE 16 & 20 CONTACTS
A
J
43
All dimensio ns f or ref ere nce only .
Shell
Siz e Part N um ber
A
Thread
Class 2A
B
Min. Full
Thread
K
+.020
–.010
L
+.000
–.010
M
+.010
–.000
N Dia.
+.010
–.000 R
±.005 S
±.031
T Dia.
+.004
–.002
Z
±.045
Size 16
Contacts
8S 10-602460-XXX .5000-28 UNEF .391 .672 .297 .562 .375 .594 .875 .120 .188
10S 461-XXX .6250-24 NEF .391 .672 .297 .562 .500 .719 1.000 .120 .188
10SL 462-XXX .6250-24 NEF .391 .672 .297 .562 .625 .719 1.000 .120 .188
12S 463-XXX .7500-20 UNEF .450 .672 .297 .562 .625 .812 1.094 .120 .188
12 464-XXX .7500-20 UNEF .625 .860 .484 .750 .625 .812 1.094 .120 .188
14S 465-XXX .8750-20 UNEF .450 .672 .297 .562 .750 .906 1.188 .120 .188
14 466-XXX .8750-20 UNEF .625 .860 .484 .750 .750 .906 1.188 .120 .188
16S 467-XXX 1.0000-20 UNEF .450 .672 .297 .562 .875 .969 1.281 .120 .188
16 468-XXX 1.0000-20 UNEF .625 .860 .484 .750 .875 .969 1.281 .120 .188
18 469-XXX 1.1250-18 NEF .625 .891 .453 .750 1.000 1.062 1.375 .120 .188
20 470-XXX 1.2500-18 NEF .625 .891 .453 .750 1.125 1.156 1.500 .120 .188
22 471-XXX 1.3750-18 NEF .625 .891 .453 .750 1.250 1.250 1.625 .120 .188
24 472-XXX 1.5000-18 NEF .625 .953 .453 .812 1.375 1.375 1.750 .147 .188
28 473-XXX 1.7500-18 NS .625 .953 .453 .812 1.625 1.562 2.000 .147 .188
32 474-XXX 2.0000-18 NS .625 1.031 .438 .875 1.875 1.750 2.250 .173 .188
36 475-XXX 2.2500-16 UN .625 1.031 .438 .875 2.062 1.938 2.500 .173 .188
40 476-XXX 2.5000-16 UN .625 1.031 .438 .875 2.312 2.188 2.750 .173 .188
MIL-5015 Type Connectors
with PCB contacts
MS3102R box mounting receptacle
.030 .001 DIA.
FOR SIZE 16 CONTACTS
N
M
K
L
BA
THREAD Z
PCB TAIL STICKOUT
SR
R
S
T
4 HOLES
HOW TO ORDER
• Order by ap plicable 10- part number in table below.
10- prefix designates olive drab cadmium plated con nector shell.
(For availab ility of other finishes consult Amph enol, Sidney, NY)
• Add insert arrangement to end of number. Refer to insert ava ilability char t on page 4 and pin-out
illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal
position, S for sock e ts in norm a l pos it i on . S ee pa ge 26 for al te r n ate rot at i on le tt er to us e .
Example pa rt number: 10-602462-3P design ates shell size 10SL wit h a 10SL-3 insert
and pin cont acts in normal posi tion.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other option s are available.
Reverse Bayonet GT Series connectors
that incorporate 5015 inserts can also be
supplied with printed circuit board contacts.
Consult Amphenol for more information.
44
Universal Header Assemblies
for flex print or PCB connectors
Mounts to all MIL-DTL-38999 and
MIL-C-264 82 Conne cto rs
The use of connectors with printed circuit
termination is rapidly gaining popularity due
to the use of high volume, vapor phase or
wave solder manufacturing processes. Ter-
mination of this style of connector to flex
print or a printed circuit board represents a
major cost in the manufacturing process for
users. When adding flex or printed circuit
board as semblie s t o an ex pe ns ive filter or fi l-
ter/transient protection connector, the total
cost of a failed solder joint, a bent pin, or an
unanticipated electrical failure becomes prohibitive. The univer-
sal header assembly from Am phenol will provide for easy sepa-
ration of the connector from the board on these occasions.
Header Assemblies Provide Cost Savings
Incorporation of the header assembly provides the user with
time and cost saving potentials. These header assemblies can
be vapor phase or wave soldered to flex or printed circuit
boards prior to the receipt of the EMI/EMP connector. Headers
can be installed to standard connectors, allowing for electrical
testing that would adversely affect the sensitive diodes, MOV’s
or ca pacito rs in th e EMI/EM P conne ctors. Expe nsive c onnec tor
assemblies can be easily removed from and reattached to the
header as sembly as the manufacturing process dict ates.
Mounting Applications
Shell modifications are recommended, but are not necessary.
The header assembly can be attached to connectors with stan-
dard fla nge placement or dir ectly to the circuit board. The ideal
application would involve either a single flange moved all the
way to the rear of the connector or a double flange. Cinch nuts
can be installed in either flange to allow easier mounting to the
panel or the header a ssembl y. The f orward fla nge would m ount
the connector to the panel; the rear flange would be used to
mount the heade r assembly. Various types of captivated or
loose attaching screws can be utilized for unique applications.
Ampheno l uni versal head ers a re slo tted to allo w m ountin g to all
series of MIL-DTL-38999 or MIL-C-26482 connectors without
special alterations. They are of similar dimension as the flange
of the mounting connector and would be approximately .185
inches (4.70 mm) thick.
Incorporates a Shorter Pin/Socket Contact
The heart of the heade r assem bl y is a sh ort pi n/s oc ke t co ntac t.
The tall of the contact would accommodate standard through-
hole diameter and thickness of the flex or printed circuit board
materials. The socket is imbedded in the molded material, mak-
ing electrical engagement with the printed circuit tail of the con-
nector.
Cylindrical Configuration
• 3 PCB stickou t dime ns ion s are ava il abl e.
• Size 22D contacts use .175 thick headers
• Size 16 contac ts use .195 thick heade rs
• Consult Amphenol for Size 20 contact use with headers.
• Header s for cy li ndri ca l con nec to rs ac com m oda te up to 12 8
pins. C onsult Amph enol ca talogs for mati ng conn ector co n-
tact layouts (12-092 and 12-090 for MIL-DTL-38999 and
12-070 for MIL-C-26482).
Mounting to Rectangular ARINC Connectors
• Headers for ARINC connector arrangements accommo-
date up to 150 pins.
• Consult Amphenol for ARINC configurations and detailed
dimensions.
Materials
• Body is molded from Torlon or PPS (Polyphenylene
Sulfide)
• Electrical engagement areas of the header contact are
plated with .00003 inches minimum of gold over .00005
inches minimum of nickel.
Headers provide easy separati on of the
connector from the PC board.
45
Universal Header Assemblies
for flex print or PCB connectors, cont.
R2
R1
S
T
TT
VISUAL
INDICATOR NOTCH
FOR TOP C OF
INSERT PATTERN
(SIZE & CONFIGURATION
OPTIONAL)
L
F RADIUS B
PCB STICKOUT
(SEE SUFFIX CHART BELOW)
G
.020 ± .001
.040 ± .001 (SIZE 20)
.0625 ± .0010 (SIZE 16)
B
PCB STICKOUT
(SEE SUFFIX CHART BELOW)
.050
G
SIZE 22
CONT A CT VIEW
SIZE 16 AND 20
CONT A CT VIEW
The drawing below shows the standard universal adapter for use with MIL-DTL-38999 and MIL-C-26482
connectors. Consult Amphenol, Sidney, NY for drawings of headers for ARINC configurations.
† TP designates true position dimensioning.
Assembly
Part Number Shell
Size F
Radius G
±.005 S
±.005
T
+.008
–.006 R1
TP† R2
TP†
TT
+.008
–.006
21-904008-XX( ) 8/9 .094 .938 .128 .719 .594 .216
21-904010-XX( ) 10/11 .094 1.031 .128 .812 .719 .194
21-904012-XX( ) 12/13 .094 1.125 .128 .906 .812 .194
21-904014-XX( ) 14/15 .125 1.219 .128 .969 .906 .173
21-904016-XX( ) 16/17 .125 1.312 .128 1.062 .969 .194
21-904018-XX( ) 18/19 .125 1.438 .128 1.156 1.062 .194
21-904020-XX( ) 20/21 .125 1.562 .128 1.250 1.156 .194
21-904022-XX( ) 22/23 .125 1.688 .154 1.375 1.250 .242
21-904024-XX( ) 24/25 .125 1.812 .154 1.500 1.375 .242
HOW TO ORDER INFORMATION
For Univer sa l Adapter used with MIL-DTL-38999 and MIL-C -26 482
Connectors
Use coded number as follows: 21-9040 XX – XX X
Designates Amphenol®
Interface Adapter
Shell size designation for
MIL-DTL-38999 Series I, II, III and IV
or MIL-C-26482 Series 1 and 2.
See suffix chart.
Arrangement number - See MIL-STD-1560
or MIL-STD-1669. Also consult Amphenol
catalogs 12-092 (MIL-DTL-38999 Series III),
12-090 (MIL-DTL-38999 Series I, II), and
12-070 (MIL-C-26482 Series 1)
Contact PCB Stickout designation
See suffix chart.
For how to order information on adapters to be use d with ARINC connectors,
consul t Amphenol Aerospace, Sidney NY.
* Shell size designation for MIL-DTL-38999 Series I, II, III & IV
and MIL-C-26482 Series 1 and 2.
Examples: Shell size 9 use 08. Shell size 25 use 24.
** Siz e 22 contacts ava ilable in all 3 stickout lengths.
Size 16 and 20 contacts available only in .185 and .270 lengths.
*** Insert arrangement 14-97 and 15-97 are not av ailable at thi s
time. Consul t Am phenol , Sidney, NY for i n format i on.
ASSEMBLY NUMBER SUFFIX CHART
Shell Size
Designation*
Arrangement
Number
Suffix***
Contact
PCB Stickout**
Suffix B ±.015
Stickout
08
Insert
Arrangement
Suffix
from
MIL-STD-1560 or
MIL-STD-1669
1.120
10 2 .185
12 3 .270
14
16
18
20
22
24
NOTE:
Size 22 accepts .018 to .022 dia . PCB tails.
Size 16 accepts .048 to .064 dia . PCB tails.
Size 20 accepts .037 to .043 dia . PCB tails.
Assemblies co ntaining Size 22 contact only: .175
Assemblies containing Size 16 or 20 conta cts: .195
See Suffix Chart
46
1
2
3
4
Amphenol is also a leader in rectangular
interconnects for printed circuit board appli-
cation. Within the rectangular families of
Amphenol interconnects are Low Mating
Force MIL-C-55302 connectors and LRM Sur-
face Mount Connectors.
LOW MATING FORCE MIL-C-55302 CONNECTORS
• Superior electrical characteristics - redundant current paths, low
constrictive resistance, stable time/life contact resistance,
unifor m cu rrent densities
• High performance polyester dielectric moldings
• Over 20,000 mating cycles with B3 Bristle Brush Bunch®
contacts
• Significant reduction in mating force. Only 1.5 ounce max
contact engaging and separating forces
• –65° to +125°C temperature rating
• High circuit count interconnections to 400 contacts per connector
• Two, three and four row patterns, 10 to 100 contacts per row,
in one contact per row increments
• 0.100 in. center to center contact spacing, square grid
• Serviceability - removable crimp contacts, repairable PC
stud and solder less wrap contacts
• Board support structure - reinforcing reduced
• Variety of contact terminations and platings
• Accessories to suit latching, piloting and polarization variations
• Up to 256 keyed mating polarizations
M55302/166 or 167 Mother Board, M55302/170 Daughter Board
1., 2. Two piece PCB connector featuring PCB stud or solderless
wrap contacts in the MB Series and field repairable 90° PCB stud
contacts in the DB Series.
M55302/169 Input/Output
3. Rear release, rear removable crimp contacts for discrete wire
cabling. I/O connector series mates with standard MB and PC recep-
tacle series to provide external inputs/outputs.
M55302/168 PC
4. 90° PCB stud co ntac ts for si de mounti ng on boa rd. M ates with DB
and I/O series.
Hybrid Rectangular Connectors with Brush/Power/Coax/Fiber
Optic Combinations
Amphenol offers wide versatility of combining contact types in rectan-
gular interconnects.
For more information on Low Mating Force Connectors see catalog
12-035 online at www.amphenol-aerospace.com
Additional Products for PCB Application
Amphenol rectangular interconnects
®
Variety of Low Mating Force Rectangular Connectors including styles
with fiber optics (right) and small styles with only 10 contacts (upper left).
47
LRM SURFACE MOUNT CONNECTORS
The introduction of high speed integrated circuitry such as VHSIC and MMIC
has enabled the Design Engineer to accomplish far more on his printed circuit
board than ever before. This, coupled with the emergence of a revolutionary
change in avi onics pack aging - modul ar a vionic a rchi tectur es - has cr eated th e
need for a high performance, low insertion force PCB connector with signifi-
cantly increased contact density.
The LRM (Line Replaceable Module) connector series are high performance,
high density interconnects, specifically designed to connect printed circuit
boards. The Amphenol Brush contact technology is the foundation of the LRM
connec tor seri es .
LRM Connectors with Staggered Grid
• Advanced design to provide high contact density for high speed integrated
circuitry in SEM-E and custom form factors
• 180 contact insert pattern grid in 8 rows: 0.100 inch spacing along the row
with 0.050 inch between rows, rows offset 0.050 inch.
• Options include various shell designs to accommodate a wide range of PC
board/heat sink combinations
• Solder tail, wire wrap or compliant contact availability
• ESD protection
LRM Connectors with GEN-X Grid
• Higher contact density and improved electrical performance
• All the features of the 180 contact pattern, including ESD protection
• Available in SEM-E and custom form factors
• 236 contact pattern grid in 8 rows: 0.075 inch spacing along the row with
0.060 inch between rows, rows offset 0.0375 inch
LRM Staggered Grid Airflow-thru Connectors
• Available for wider boards up to 0.425 inch. These accommodate standard
brush tails in staggered pattern, but with increased spacing in the center,
and they also provide more airflow cooling of inserts.
LRM Connectors with Many Contact and Shell Design Options
Flexibility to meet customer demands that include: combinations of brush and
fiber optics; options for high speed contacts, RF contacts, or new high amper-
age RADSOK® contacts; incorporation of flex circuits; custom shells with multi-
ple bays.
For more information on LRM Connectors see new catalog 12-037 at website
www.amphenol-aerospace.com.
BACKPLANE ASSEMBLIES
Amphenol is the leading manufacturer of custom backplane assemblies using
high density, ruggedized, board-to-board backplane interconnects. These can
incorporate brush contacts, pc tail, or press-fit compliant pin contacts, or fiber
optic te rmini. Th ey also c an inco rporate fork and blad e contact s (see ne xt page
for fork and blade contact connectors).
• Electric al Bac kpl an es - Large pan el siz es with high layer cou nts , and fea-
tures suc h as high aspect rati o pl ati ng, s ma ll di am ete r pla ted-through hole s,
and controlled impedances.
• Optical Backplanes - Fiber termination with Multi-Terminal (MT) optical fer-
rules. Ri bbon cable sorting allows programming flex ibility; thus rendering the
entire system easily upgradeable.
• Hybrid Optical Backplanes - Integrated electrical and optical systems in one
discreet package for advanced avionics systems.
For more information on Backplane Assemblies from Amphenol Backplane
Systems division, see publication SL-392 at websites:
www.amphenol-abs.com or www.amphenol-aerospace.com.
Additional Products for PCB Application
Amphenol rectangular interconnects, cont.
®
From top to bott om :
Staggered Grid, 2 Bay LRM;
GEN-X Grid, 2 Bay LRM;
LRM inserts with RADSOK contacts;
LRM insert wit h MT ferr ul e fiber optics and brus h
contacts in a Differential Pair insert.
LRM Module Inserts (showing front and back of
inserts) with PC Tails in Staggered Grid Pattern
Backplane Assembly with LRM Connectors with
Brush Contacts on one s ide and Cylindr ical Connec-
tors with Press-fi t Com pliant Contacts on the other.
48
UHD MODULE/BACKPLANE CONNECTORS WITH FORK & BLADE
CONTACTS
Amphenol’s wide range of board level interconnects also includes high
density UHD Series module and backplane connectors. These use the
staggere d grid patte rn but do no t use brush contact s. The stag gered grid
pattern i s 80 con tac ts pe r in ch , .025 pitch in 8 ro w s. The y a re SEM -E f or-
mat and are qualified to: EIA 15-763, DESC 89065, IEEE 1101.1 to
1101.9.
The UHD module connectors have surface mount blade contacts and the
mating UHD backplane connectors have solderless press-fit tuning fork
contac ts. There are a wide range of hi gh contact density patte rns and the
length and style can be tailored to meet customer requirements. They
are rigid pin terminated to the board or flex terminated to the board.
Coax, fiber optics and power contacts can also be integrated into the
connector configuration. Other options include EMI shielding and UHD
interconnects can be provided in a stacking configuration.
NAFI SERIES WITH FORK & BLADE CONTACTS
Amphenol NAFI daughtercard and backplane connectors are another
board le vel inte rconne ct that u ses the fork and bl ade cont act te rmination .
They prov ide a w ide rang e of medi um contac t densi ty pattern s and m eet
MIL-C-28754 stand ards. Daughtercard termination is through-hole, using
nickel/gold solder plated contacts. The mating interface is a blade con-
tact which can be either parallel or perpendicular to the daughtercard.
They are av ai lab le w ith 2, 3 , 4 and 5 rows of c on tac ts , .100 x .100 pitch .
They ca n be rigid pin termin ated to the board or fle x circuit ry can be u sed
to attach to the board.
Both UHD and NAFI interconnects are used in military and commercial
aviation, in space applications, shipboard and in military vehicles. For
more information see catalog 12-036 at www.amphenol-abs.com or
www.amphenol-aerospace.com.
PRINTED CIRCUIT BOARD TERMINAL BLOCKS
Amphenol Pcd division supplies wire-to-board discrete-wire connections
in a variety of styles.
• Pluggable terminal blocks and headers in 3.5mm/.150” pitches in
straight, angled, with locking ears, 2-tier, 3 tier, and low profile styles.
• Fixed te rminal blocks i n 5.0m m, .200”, .2 50”, .375” pitches in standa rd
profiles, multi-tier, spring-clamp, high current and high voltage styles.
• Edgecard connectors that are screw terminated style in different size
pitches.
• Custom designed terminal blocks with ear mounting options, DIN-rail
mounting options, and others.
WIRING INTERFACE MODULES
Amphenol Pcd also supplies an industrial board level interconnect that
replaces discrete terminations with a single pluggable unit. Connectors
can be D-Sub, ribbon cable, RJ style, Centronic or DIN types. Also
diodes, LEDs, resistors, capacitors, relays or fuses can be included in
the unit.
For more in formati on on term inal blocks an d wiring i nter face mo dules go
online to www.amphenol-pcd.com.
Amphenol Rectangular Interconnects
additional products for PCB application
®
UHD Backplane Connectors on Board, Rigid Pin
Termination, with Fiber Optics, Coax or Power Contacts
NAFI Daughtercard Connector with Flex Termination
PCB Circuit Board Terminal Blocks and Wiring Interface
Modules
49
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, NY 13838-1395
Phone: 607-563-5011
1-800-678-0141
Fax: 607-563-5157
Web: www.amphenol-aerospace.com
Web: www.amphenol-industrial.com
SALES OFFICES
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
23276 South Pointe Drive
Suite 113
Laguna Hills, CA 92653
Phone: 949-855-4454
1-800-678-0141
Fax: 949-855-9115
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
2010 Corporate Ridge
McLean, VA 221 01
Phone: 1-800-678-0141
Amphenol Backplane Systems
18 Celina Avenue
Nashua, NH 03063
Phone: 888 -31 8- 355 3
Fax: 603-883-0247
Web: www.amphenol.abs.com
Advanced Circuit Technology
118 Northeastern Boulevard
Nashua, NH 03062
Phone: 603 -88 0- 600 0
Fax: 603-880-1785
Web: www.act.flexcircuit.com
Amphenol Industrial Operations
Amphenol Power Solutions
34190 Riviera Drive
Fraser, MI 48026
Phone: 586 -29 4- 740 0
Fax: 586-294-7402
www.radsok.com
Amphenol Pcd
2 Technology Drive
Peabody, MA 01960
Phone: 978 -53 2- 880 0
Fax: 978-532-6800
Web: www.amphenolpcd.com
Amphenol Canada
20 Melford Drive
Scarborough, ON M1B 2X6
Canada
Phone: 416-291-4401
Fax: 416-292-0647
Web: www.amphenolcanada.com
DISTRIBUTORS
Corporate Headquarters
Alphabetical Listing
ARROW ELECTRONICS
7459 S. Lima Street
Englewood, CO 80112-5816
Phone: 800 -77 7- 277 6
Fax: 800-562-3542
Web: www/arrow.com
AVNET EMG
11333 Pagemill Road
Dallas, TX 75243
Phone: 800 -33 2- 863 8
Fax: 214-553-2168
Web: www.avnet.com
PEI GENESIS
2180 Horn ig Ro ad,
Philadelphia, PA 19116
Phone: 800 -64 2- 875 0
Fax: 215-552-8041
Web: www.peigenesis.com
POWELL ELECTRONICS
4848 S. Island Ave.
Philadelphia, PA 19153
Phone: 800 -23 5- 788 0
Fax: 215-937-4655
Web: www.powell.com
TTI INC.
2441 Nort hea st Pkwy.
Fort Worth , TX 76 10 6
Phone: 800 -22 5- 588 4
Fax: 817-740-9494
Web: www.ttiinc.com
SMALL DISADVANTAGED/
MINORITY DISTRIBUTORS
CHEROKEE NATION
DISTRIBUTORS
Highway 51 West
Stilwell, OK 74960
Phone: 918 -69 6- 277 7
Fax: 918-696-3129
Web: www.chicnd.com
JRH ELECTRONICS, INC.
2002 E. Lincoln Drive West
Rt. 73,
Marlton, NJ 08053
Phone: 800 -46 7- 930 9
Fax: 609-988-8728
Web: www.jrhelec.com
INTERNATIONAL
(Military Aerospace Offices)
LATIN AMERICA
ARGENTINA
Amphenol Argentina
Avenida Callao 930
2nd floor Office B Plaza
C1023AAP Buenos Aires, Argentina
Phone: (54 11) 48 15 68 86
Fax: (54 11) 48 14 57 79
E-mail: vendas@amphenol.com.ar
BRAZIL
Amphenol do Brasil Ltda.
Rua Diogo Moreira 132
CEP 05423-010
Sao Paulo - SP, Brazil
Phone: (55 -1 1) 381 5.1 003
Fax: (55-11) 3815.1629
E-mail: vendas@amphenol.com.br
MEXICO
Amphenol Mexico
Prolongacion Reforma 61-6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico D.F., Mexico
Phone: (52 -5 5) 525 8.9 984
Fax: (52-55) 5081.6890
E-mail: info@amphenolmexico.com
EUROPE
ENGLAND
Amphenol Limited
Thanet Way, Whitstable
Kent CT5 3JF, United Kingdom
Phone: (44-1-227) 773200
Fax: (44-1-227) 276571
Web: www.amphenol.co.uk
FRANCE
Amphenol Socapex
Promenade de l’Arve, BP29
Thyez 74301 948 Cedex, France
Phone: (33-4) 50892800
Fax: (33-4) 5096-1941
Web: www.amphenol-socapex.com
GERMANY
Amphenol-Air LB GmbH
Am Kleinbahnhof 4
D-66740 Saarlouis, Germany
Phone: (49 -6 831 ) 9810-87
Fax: (49-6831) 9810-30
Web: www.amphenol-airlb.com
ITALY & REST OF EUROPE
Amphenol Italia S.p.A.
Via Barbaiana 5
20020 Lainate (Milano), Italy
Phone: 39-02-932541
Fax: 39-02-93254444
E-mail: info@amphenol-it.com
MIDDLE EAST / AFRICA
ISRAEL
Bar-Tec Ltd.
3 Hagavish St., P.O.B. 279
Kfir-Barkan Bldg., East Indust. Zone
Kfar Sava 44102, Israel
Phone: (972-9) 764.4100
Fax: (972-9) 7674324
E-mail: www.bar-tec.com
SOUTH AFRICA
Amphenol South Africa
30 Impala Road
2196 Sandton - Chislehurston
South Africa
Tel: (27 -1 1) 783 -95 17
Fax: (27-11) 783-9519
E-mail: amphenol_africa@csi.com
TURKEY
Amphenol Turkiye Office
Ayazaga Mah. Meydan Sk. No. 28
Beybi Giz Plaza, Kat. 26 Maslak
34396 Istanbul
Phone: 90 (212) 335 25 01
Fax: 90 (212) 335 25 00
Web: www.amphenol.com.tr
E-mail: saracoglu@amphenol.com.tr
ASIA / PACIFIC
AUSTRALIA
Amphenol Australia Pty Ltd
2 Fiveways Blvd. Keysborough
Melbourne, Victoria 3173
Australia
Phone: 613 8796 8888
Fax: 613 8796 8801
E-mail: info@amphenol.com.au
RUSSIA
Amphenol Russia Office
8-2 Yaroslavskaja Str.
129164 Moscow, Russia
Phone: 7495 937 634
E-mail: russia@amphenol.com
CHINA
Amphenol Aerospace China Office
Phone: +607-563-4060
E-mail: ChinaSales@amphenol-aao.com
INDIA
Amphenol Interconnect India, Pvt, Ltd.
105 Bhosari Industrial Area
Pune, 411 026, India
Phone: (91-20) 27120 481
Fax: (91-20) 27120 581
E-mail: sales@amphenol-in.com
JAPAN
Amphenol Japan Mil Aero & Ind ustrial
471- 1, Deba, Ritto-city
Shiga 520 -30 41, Japan
Phone: 81-77553-8501
Fax: 81-77551-2200
KOREA
Amphenol Aerospace Korea Office
Phone: +607-563-4061
E-mail: KoreaSales@amphenol-aao.com
SOUTHEAST ASIA
Amphen ol Ae rospac e Sout h Eas t Asi a
Office
Phone: +607-563-4062
E-mail: SouthEastAsiaSales@amphenol-
aao.com
TAIWAN
Amphenol Aerospace Taiwan
Phone: +607-563-4063
E-mail: TaiwanSales@amphenol-
aao.com
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are
believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our prod-
ucts are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety mea-
sures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.
©2006 Amphenol Corp. Printed in U.S.A. JCP 5/2006
