APEM www.apem.com 1
New!
❑ Protected against accidental actuation
❑ Wide choice of colors
❑ Laser etched or pad printed symbols
❑ Illuminated or non-illuminated
❑ Sealed to IP69K
ELECTRICAL SPECIFICATIONS
• Currrent/voltage rating with resistive load :
- Silver plated contacts (A) : 5 A 24 VDC, 100,000 cycles
10 A 24 VDC, 10,000 cycles (terminals 6.35 x 0.8 only)
- Gold plated contacts (D) : 20 mA 12 V, 150,000 cycles
• Current/voltage rating with lamp load - silver contacts (A) :
- function 6 : 100 W 24 VDC, 10,000 cycles
- other functions : 60 W 24 VDC, 10,000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500 VDC
• Dielectric strength : 2,000 Vrms 50 Hz min. between terminals
• Mechanical life :150,000 cycles min.
MATERIALS
• Case : PA 6-6
• Actuator : ABS
• Bezel : PA 6-6
• Contacts & terminals : brass, solid
silver grain, silver plated (A)
or brass, solid silver grain, gold
plated (D)
•
Contact roller : brass, nickel plated
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing : IP69K according to DIN 40050-9
• Salt spray resistance : 96 hours according to IEC 512-6, test 11f
• Vibration resistance : 10-500 Hz / 10 g per IEC 60068-2-6
• Operating temperature : -40 °C to +85 °C
The company reserves the right to change specifications without notice.
KH series
Power rocker switches with protection guard
Distinctive features and specifications
SW-KH-1709
2 APEM
www.apem.com
New!
KH series
Power rocker switches with protection guard
Overview
KH
Side A Side B
SERIES
Electrical functions
4 ON ON ON
4-1R ON ON MOM
5MOM - ON
6ON - ON
7MOM OFF MOM
8ON OFF MOM
9ON OFF ON
Poles
3Single pole
4Double pole
Protection guard
1On 4 sides
2On 2 sides
Color
1Blue
1/4 Dark blue
2Black
3Green
4Grey
5Yellow
6Red
7Ivory
9Orange
AAluminum
bright
Terminals
Solder lug/quick-connect
A10 term. with barrier
B10 term. w/o barrier
C10 terminals for use with
connector U2292 or U3152
Normalized quick-connect
6.35.0,8
D10 term. with barrier
E10 term. w/o barrier
F10 term. for use with
connector U2292 or
U3152
Terminals (continued)
Normalized quick-connect
2.8x0.8
G10 term. with barrier
H10 term. w/o barrier
J10 terminals for use
with connector U2282
Wiring
See following
pages.
LEDS
XNone
ALED 6 V red
BLED 6 V green
CLED 6 V yellow
MLED 6 V blue
RLED 6 V white
DLED 12 V red
ELED 12 V green
FLED 12 V yellow
NLED 12 V blue
SLED 12 V white
JLED 24 V red
KLED 24 V green
LLED 24 V yellow
PLED 24 V blue
TLED 24 V white
...
CASE + LEDS
ACTUATOR
Type
1For non-illuminated
application
2For illuminated
application
Area M
ACTUATOR MARKING
Orientation
N
O
S
E
Area A Area B
Symbols
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
Contacts
ASilver
DGold plated
Symbols & Accessories : see end of the series.
Sealing
ZIP69K
Standard
NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information.
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
3
2
1
6
5
4
CKRMA1-B
CKRMA2-B
FICHIER: CKRMA
le 29/04/08
ECHELLE: 0.625
indice B
A
M
B
APEM www.apem.com 3
New! KH series
Power rocker switches with protection guard
Case
Protection guard on 2 sides - KH2
2-3 1-2
5-6 4-5
Single pole Double pole
KH244* ON ON ON
KH244-1R* ON ON MOM
KH235 KH245 MOM - ON
KH236 KH246 ON - ON
KH237 KH247 MOM OFF MOM
KH238 KH248 ON OFF MOM
KH239 KH249 ON OFF ON
* Function 4 : single pole in double pole case
Protection guard on 4 sides - KH1
2-3 1-2
5-6 4-5
Single pole Double pole
KH144* ON ON ON
KH144-1R* ON ON MOM
KH135 KH145 MOM - ON
KH136 KH146 ON - ON
KH137 KH147 MOM OFF MOM
KH138 KH148 ON OFF MOM
KH139 KH149 ON OFF ON
* Function 4 : single pole in double pole case
MODEL
STRUCTURE
CASE + LEDS
➞Flat seal
➞Flat seal
4 APEM
www.apem.com
KH series
Power rocker switches with protection guard
Case
New!
Function 8
KH38-KH48
Function 9
KH39-KH49
Function 4
KH44
Function 4-1R
KH44-1R
ELECTRICAL FUNCTIONS AND CONNECTIONS
Positions
Function 5
KH35-KH45
Function 6
KK36-KH46
Function 7
KH37-KH47
1233 21
CKRFUN1-A
123
Positions
1233 21
CKRFUN1-A
123
In the tables below, terminal connections as viewed from bottom of switch.
Only the contact area is represented.
For single pole models, only terminals 1, 2 and 3 are to be considered (not terminals 6, 5, 4).
o = with terminal
▲ = momentary
indice A
ECHELLE: 0.45
le 25/07/07
FICHIER: CKRFUN-P6
1
23
654
123
654
1
23
654
123
654
123
654
1
23
654
123
654
1
23
654
1
23
654
123
654
1
23
654
123
654
CKRFUN894-A
indice B
ECHELLE: 0.45
le 12/01/09
FICHIER: CKRFUN-P6
1233 21
CKRFUN1-A
123
1
23
654
123
654
1
23
654
123
654
123
654
1
23
654
123
654
1
23
654
1
23
654
123
654
1
23
654
123
654
321
4
56
321
4
56
321
4
56
321
456
321
4
56
321
4
56
321
456
321
456
123
654
CKRFUN894-ACKRFUN1567-B
D10 terminals with barrier
E10 terminals w/o barrier
F10 terminals for use with
connector U2292 or
U3152
G10 terminals with barrier
H10 terminals w/o barrier
J10 terminals for use with
connector U2282
A10 terminals with barrier
B10 terminals w/o barrier
C10 terminals for use with
connector U2292 or
U3152
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
Solder lug / quick-connect
Normalized quick-connect 6.35x0.8 Normalized quick-connect 2.8x0.8
2.80x0.80
(.110x.031)
(.047DIA)
Ø1.20
Terminals are marked on the case.
The drawings show the maximum possible number of terminals.
TERMINALS
CASE + LEDS
APEM www.apem.com 5
New! KH series
Power rocker switches with protection guard
Case
ASilver
DSilver, gold plated
ZIP69K - standard
Side A
Side B
Complete each enlarged box with one of the codes listed below.
XWithout LED
LED consumption : 20 mA @ nominal voltage (25 °C)
Other illumination solutions : on request.
Red Green Yellow Blue White
6 VDC A B C M R
12 VDC D E F N S
24 VDC J K L P T
No
resistor U V W Y Z
Amber
4
5
6
9
Red/green
1
2
3
8
CONTACT MATERIALS
CASE + LEDS
SEALING
CASE + LEDS
LEDS
Side A Side B
CASE + LEDS
6 APEM
www.apem.com
New!
KH series
Power rocker switches with protection guard
Case - LEDs
Independent LED or integrated functions
G(standard)
25
36
14
CKRRLG-A
7
8
9
1010 9
87-
+
4
1
6
3
5
22
5
36
14
7
8
9
10
-
+
+-
-
+
Please contact us for other wiring solutions.
To have independent LEDs.
H
+
-
+
-109
87
4
1
6
3
5
22 5
36
14
+
-
7
8
9
1010
9
87
CKRRLH-A
4
1
6
3
5
2
R2
R1
R2
R1
R2
R1
To obtain 2 symbol illumination levels (night illumination when OFF
and higher illumination when ON).
H wiring with LED on side A available with functions 6, 8, 9 and 44.
H wiring with LED on side B available with functions 5, 6 and 9.
H wiring with 2 LEDs available with functions 8 and 9.
More information (H wiring schematics) : on request.
Dotted line = external wiring, continuous line = internal wiring
I
CKRRLI-A
109
87
4
1
6
3
5
2
To have a polarity inversion (typical application : fan motor).
Dotted line = external wiring
Available in Single Pole only, with H and J quick-connect terminals.
Power supply betweeen 2 and 5 - Load between 1 and 4 or 3 and 6.
Available with H and J quick-connect terminals.
WIRING The LED wiring diagram is shown on the case.
CASE + LEDS
APEM www.apem.com 7
New! KH series
Power rocker switches with protection guard
Actuator - Marking
ACTUATOR TYPE
ACTUATOR COLOR
1Blue
1/4 Dark blue
2
3
Black
Green
Code Color Code Color
4
5
6
7
Grey
Yellow
Red
Ivory
Code Color
9
A
Orange
7/1 White
Aluminum
bright
1For non-illuminated application
2For illuminated application
Other rocker design : on request.
MARKING ORIENTATION If no marking required, complete the box with code N.
Other orientations : on request
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
NOSE
ACTUATOR
ACTUATOR
ACTUATOR MARKING
Note : colors 7 and 7/1 not available on
illuminated versions.
A soft-touch varnish can be added. Consult us.
8 APEM
www.apem.com
New!
KH series
Power rocker switches with protection guard
Marking - Mounting
SYMBOLS
AMB
ACTUATOR MARKING
(.551)
14.00
20.20
(.795)
(.252)
6.40
(.799)
20.30
7.70
(.303)
R:6.00
(.236 R)
(.787 R)
R:20.00
87.00°
ECHELLE: 0.625
le 26/07/07
FICHIER: CKRZL-P11
indice A
CKRZL1-A
MATRIX MOUNTING
PANEL CUT-OUT
Panel thickness : 0.8 mm to 4.6 mm
Recommended panel thickness :
between 2 mm and 3.5 mm
21.08 0/+0.3
(.830 0/+.012)
(1.449 0/+.012)
36.80 0/+0.3
CKRDE3-C
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6
654
1
2
3
3
2
1
6
5
4
CKRMA1-B
CKRMA2-B
FICHIER: CKRMA
le 29/04/08
ECHELLE: 0.625
indice B
A
M
B
XX No symbol
Available symbols : see end of the series.
Marking color
White marking for illuminated rockers (laser etching) and non-illuminated black
rockers (pad printing). Black marking for non-illuminated color rockers (pad printing).
Other : on request.
Laser etching resistance
- Water and petrol resistant acccording to EN61058-1
- Tear resistant (cross-cut test) according to NF ISO 2409 : class 0
- UV resistant according to ISO 4892-2
Marking area
For illuminated versions. The symbol will be included in
the hatched area. Marking in M area : on request.
APEM www.apem.com 9
K range
Power rocker switches and indicators
Symbols
CODE SYMBOL DESCRIPTION
XX None -
-
-
-
-
Stop
Motion
Up motion
CODE SYMBOL DESCRIPTION CODE SYMBOL DESCRIPTION
Revolving light
Rear
ventilator
Heating
(0637)
Door
opening
Windshield
demister/defroster
(0635)
Windshield
wiper
(0086)
Windshield
washer
(0088)
Ventilator fan
(0089)
16
17
18
19
20
21
22
23
03
04
05
06
07
08
09
Most symbols meet the ISO 7000 standard “graphical symbols for use on equipment” (code given in bracket in the
description). Contact us for symbols not featured in the following tables.
Legend scale :
Depending on space available on the product (see “Symbols” section at the end of each series).
-
-
02
01
Down motion
Hot
Cold
Hazard warning
(0085)
10
11
12
13
Traveller
lighting
14
Driver
lighting
(1421
15
Side mirror
defroster
Restarting
pump
Front
fog lights
(0633)
Rear
fog lights
(0634)
24
25
26
27
28 Propulsion
system trim
Electric motor
(0011)
31
Anchor
Beacon
(1141)
30
29
Emergency first
aid vehicle
(2565)
Load tipping
(1557)
Loading light
(2457)
Tractor, rear-ward
(1667)
Combine,
direction of
movement (1678)
Use no forks
(2406)
32
33
34
35
36
37
Transmission
(1166)
38
Working spot
light
(1145)
39
Engine
(0640)
Horn
(0244)
40
41
Lock
(1656)
Taxi sign light
(2551)
Working light
(1204)
Working light
symmetric
(1204)
-
-
42
43
44
45
46
47
10 APEM
www.apem.com
K range
Power rocker switches and indicators
Symbols
Most symbols meet the ISO 7000 standard “graphical symbols for use on equipment” (code given in bracket in the
description). Contact us for symbols not featured in the following tables.
Legend scale :
Depending on space available on the product (see “Symbols” section at the end of each series).
CODE SYMBOL DESCRIPTION
All wheel
drive
48
CODE SYMBOL DESCRIPTION
Indicator
64
Brake release
65
Baggage room
left door
66
Baggage room
right door
67
Power blinds
68
Engine
idle control
69
Cruise
res/set
70
Driver windows
up/down
71
Middle door
opening
72
Front door
opening
73
Lighting in
baggage room
74
Cruise on/off
75
TV
76
Pump
77
Toilet
78
Toilet
decontamination
79
CODE SYMBOL DESCRIPTION
Front windshield
heating
80
Aus
81
Radiator
fan
82
Remove
retarder
83
Restricted
speed
84
Preheater
85
ABS detection
86
ECAS detection
87
Engine stop
88
Cruise
res/cancel
89
ECAS reset
90
Driver windows
heating
91
Cruise set
92
Air bag
up/down
93
Read lighting
94
Lighting
main switch
95
Differential lock
(1662)
49
-
50
-
51
-
-
Rear window
wiper
(0097)
Rear window
washer
(0099)
52
53
54
55
Lower load
(2223)
Cab lock
(1560)
56
57
Extraction
58
Pumping in
59
Rear PTO
(1572)
60
Front PTO
61
Rockshaft down
62
Rockshaft up
63
APEM www.apem.com 11
K range
Power rocker switches and indicators
Symbols
Most symbols meet the ISO 7000 standard “graphical symbols for use on equipment” (code given in bracket in the
description). Contact us for symbols not featured in the following tables.
Legend scale :
Depending on space available on the product (see “Symbols” section at the end of each series).
CODE SYMBOL DESCRIPTION
Heating
using water
96
Low beam
97
Position
lights
98
Diesel
acceleration
99
Manual
mode
Clockwise
cabin rotation
Anticlockwise
cabin rotation
-
A1
A2
A3
A4
-
Parking
brake
A5
A6
-
A7
-
A8
-
A9
-
AA
-
AB
-
AC
CODE SYMBOL DESCRIPTION
-
AD
-
AE
-
AF
Battery charging
condition
(0247)
AG
Turn signals
(0084)
AH
High beam
(0082)
AJ
Differential lock,
bogie
(2600)
AK
Brushing with a
rotating brush
(0070)
AL
Differential lock,
transfer case 4x4
(2475)
AM
Loader bucket,
float
(1441)
AN
Loader bucket
(1437)
AP
Rear window
washer & wiper
(0098)
AQ
Header
Header drive
(1579)
AR
Excavator/backhoe
boom side shift
(2091)
AS
Chemical water
treatment
(1851)
AT
Grapple skidder,
single funct° boom
(1762)
AU
CODE SYMBOL DESCRIPTION
-
AV
-
AW
-
AY
-
AZ
-
B1
-
B2
-
B3
12 APEM
www.apem.com
K range
Power rocker switches and indicators
Accessories
MOUNTING PANEL CUT-OUT
For 1 element U2267 For 2 elements U2261 For 3 elements (2xU2261 + 1x U2262)
PANEL CUT-OUT
MOUNTING PANEL END
U2261
MOUNTING PANEL MIDDLE
U2262
(1.898 0/+.008)
48.20 0/+0.20
51.00 0/+0.20
(2.008 0/+.008)
CKRDE2-C
(3.051 0/+.008)
77.50 0/+0.20
48.20 0/+0.20
(1.898 0/+.008)
(.984 0/+.008)
25.00 0/+0.20
48.20 0/+0.20
(1.898 0/+.008)
(1.152)
29.26
56.00
(2.205)
(1.043)
26.503.80
(.150)
CKRU2261-C
Front panel dismounting
22 X44 ADAPTER
U3060
Rear panel dismounting
22 X44 ADAPTER
U3070
(2.205)
56.00
26.26
(1.034)
(.150)
3.80 26.50
(1.043)
CKRU2262-C
SINGLE MOUNTING PANEL
U2267
(.150)
3.80 26.50
(1.043)
(2.205)
56.00
32.26
(1.270)
For additional elements, add 26.40 mm (1.039)
Recommended panel thickness : 1.10 mm - 1.80 mm - 2.60 mm - 3.40 mm - 4.20 mm - 5 mm - 5.80 mm
Recommended panel thickness : 0.60 mm to
1.50 mm
Recommended panel thickness : 1.60 mm -0,1/0
to 5.60 mm -0,1/0 in stages of 0.40 mm
Adapter colors (replace 0 with code)
1/4 : dark blue - 2: black - 4 : grey
5 : yellow - 6: red - 7/1 : white
FICHIER: CKRAD
le 02/02/10
ECHELLE: 0.625
CKRAD-3
44.00 0/+0.1
(1.732 0/+.004)
(.866 0/+.004)
22.00 0/+0.1
CKRAD-1
50.00
(1.969)
(.748)
19.003.50
(.138) (.984)
25.00
CKRAD-2
25.00
(.984)
(.138)
3.50 19.00
(.748)
(1.969)
50.00
FICHIER: CKRAD
le 02/02/10
ECHELLE: 0.625
CKRAD-3
44.00 0/+0.1
(1.732 0/+.004)
(.866 0/+.004)
22.00 0/+0.1
CKRAD-1
50.00
(1.969)
(.748)
19.003.50
(.138) (.984)
25.00
CKRAD-2
25.00
(.984)
(.138)
3.50 19.00
(.748)
(1.969)
50.00
FICHIER: CKRAD
le 02/02/10
ECHELLE: 0.625
CKRAD-3
44.00 0/+0.1
(1.732 0/+.004)
(.866 0/+.004)
22.00 0/+0.1
CKRAD-1
50.00
(1.969)
(.748)
19.003.50
(.138) (.984)
25.00
CKRAD-2
25.00
(.984)
(.138)
3.50 19.00
(.748)
(1.969)
50.00
APEM www.apem.com 13
K range
Power rocker switches and indicators
Accessories
CONNECTORS
6 terminal version
For use with terminals type 2, 3, 4 or 5.
6.35 (1/4) tabs to be fitted by the user
(example : TE42282-2).
Can be used for the KG series.
10 terminal version
For use with terminals type H or J.
2.8 (.110) tabs to be fitted by the user
(example : AMP/Tyco 0-927779-3).
10 terminal version
For use with terminals type B, C, E or F.
6.35 (1/4) tabs to be fitted by the user
(example : TE42282-2).
U2260 U2282 U2292
Standard color : black. Other colors : on request.
Connectors cannot be combined with wiring types H and I.
U2260 U2282 U2292
➀poka-yoke
45.00
(1.772)
33.40
(1.315)
20.80
(.819)
(.433)
11.00 (.984)
25.00
CKRU2260-A
1
(1.441)
36.60
(.803)
20.40
11.00
(.433) (.961)
24.40
(1.157)
29.40
CKRU2280-A
1
(.819)
20.80
11.00
(.433)
29.40
(1.157)
24.40
(.961)
36.60
(1.441)
CKRU2290-A
2 tools are supplied
ACTUATOR REMOVING TOOL
EXTRACT ACTUATOR (KR ONLY)
Allows the extraction of the rocker / rocker support assembly.
Place the 2 claws under the support and push as indicated by the arrow.
EXTRACT ROCKER (KR ONLY)
Allows to separate the rocker from its support.
Insert the tool between rocker and support as indicated by the arrrow. Pull out the tool in the
opposite direction.
EXTRACT SWITCH (KR, KL AND KI)
Allows to extract switch from panel mounting units. 2 tools are necessary.
Insert the tools between switch and panel mounting units from the rear to compress the snap-
in device. Pull off switch manually.
U3052
14 APEM
www.apem.com
K range
Power rocker switches and indicators
Accessories
BLANKING CAPS
U2271 Blue
U2271/4 Dark blue
U2272
U2273
Black
Green
Code Color Code Color
U2274
U2275
U2276
U2277
Grey
Yellow
Red
Ivory
U2279 Orange
Usefull for future extensions.
Recommended panel thickness :
1.50 mm to 6 mm
1.50
(.059)
22.00
(.866)
25.00
(.984) (.248)
6.30
44.10
(1.736) (.819)
20.80
46.80
(1.843)
Connectors can be hanged on specific hole plugs. Contact APEM.
10 terminal version
For use with terminals type B, C, E or F.
6.35 (1/4) tabs to be fitted by the user
(example : «Timer» terminals TE927833-2)
U3152
U3152
➀poka-yoke
New!
CONNECTORS (continued)