3.2x1.6mm SMD CHIP LED LAMP Features AP3216MBC BLUE z3.2mmx1.6mm zLOW SMT LED, 1.1mm THICKNESS. POWER CONSUMPTION. zWIDE zIDEAL VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. zVARIOUS Package Dimensions COLORS AND LENS TYPES AVAILABLE. Description The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Selection Guide Par t No . AP3216MBC Di c e BLUE (GaN) Iv (mc d ) @ 20 mA L en s Ty p e WATER CLEAR Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. AP3216MBC-1 View in g An g l e Min . Ty p . 21/2 2 8 120 Electrical / Optical Characteristics at T)=25C Sy m b o l Par ameter Dev ic e peak Peak Wavelength Blue 1/2 Spectral Line Halfwidth C Ty p . Max . Un i t s Tes t Co n d itio n s 430 nm IF=20mA Blue 65 nm IF=20mA Capacitance Blue 100 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.8 4.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at T)=25C Par ameter B lu e Un i t s Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 200 mA Reverse Voltage 5 V Operation/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. AP3216MBC-2 Blue AP3216MBC AP3216MBC SMT Reflow Soldering Instructions AP3216MBC-3 AP3216MBC Recommended Soldering Pattern (Units : mm) AP3216MBC Tape Specifications (Units : mm) AP3216MBC-4