This is just the base of the Raspberry Pi Model A+ case. You can add lids from the list on the
right and check out some of our favorite combos in the photos above.
This is the clear base. It reminds us of...well whatever's inside it. It's clear. Check out our other
colors from the drop down on the right!
This enclosure was designed by Mike Doell. It's made of ultra-durable, super-glossy
polycarbonate, and is both good looking and tough enough to toss into your bookbag or
toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your Micro
SD card, slots for both your Pi Camera and upcoming Display, and a space for your GPIO cable
to extend out from the Pi.
The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out your Pi
you can use your case without the lid and add hats to your A+ with ease.
This case works for the Raspberry Pi Model A+ only. It does not work for the Raspberry Pi
Model A, B, B+, or Pi 2.
No Raspberry Pi included. This is just the base of the case and no lid is included.
Here's how to insert a Raspberry Pi into our case:
Here's how to insert a Raspberry Pi into our case:
TECHNICAL DETAILS
MAY WE ALSO SUGGEST...