93-22SDRSYGC/S530-A3/TR8 - Everlight International Corp.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

Technical Data Sheet

High performance SMD LED with Reflector

93-22SDRSYGC/S530-A3/TR8

Features

 Package in 12mm tape on 7” diameter reels.

 Compatible with automatic placement equipment.

 Compatible with infrared and vapor phase reflow solder

process.

 EIA std. package.

 IC compatible.

 Pb-free.

 The product itself will remain within RoHS compliant

version.

Applications

 Automotive: backlighting in dashboard and switch.

 Telecommunication: indicator and backlighting in

telephone and fax.

 Indicator and backlight for audio and video equipment.

 Indicator and backlight for battery driven equipment.

 Small indicator for outdoor applications.

 Indicator and backlight in office equipment.

 Flat backlight for LED, switches and symbol.

 General use.

Device Selection Guide Chip

Type Material Emitted Color Lens Color

SDR AlGaInP Dark Red

SYG AlGaInP Brilliant Yellow Green

Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

93-22SDRSYGC/S530-A3/TR8

Package Dimensions

Note: The tolerances unless mentioned is 0.1mm ;Unit = mm

SDR

SYG

For reflow soldering (propose)

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

93-22SDRSYGC/S530-A3/TR8

Absolute Maximum Ratings @Ta=25

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

SDR

Forward Current IF SYG 25 mA

Operating Temperature Topr -40 ~ +85 

Storage Temperature Tstg -40~ +100 

Electrostatic

Discharge(HBM)

ESD 2000 V

SDR

Power Dissipation Pd SYG 60 mW

SDR Peak Forward Current (Duty

1/10 @ 1KHz) IFP SYG 60 mA

Soldering Temperature Tsol

Reflow Soldering : 260  for 10 sec.

Hand Soldering : 350  for 3 sec.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

93-22SDRSYGC/S530-A3/TR8

Electro-Optical Characteristics @ Ta=25

Parameter Symbol Min. Typ. Max. Unit Condition

SDR 17 41 -----

Luminous Intensity IV SYG 11 17 -----

mcd IF=20mA

SDR ----- 650 -----

Peak Wavelength p SYG ----- 575 ----- nm IF=20mA

SDR ----- 639 -----

Dominant Wavelength d SYG ----- 573 -----

nm IF=20mA

SDR ----- 20 -----

Spectrum Radiation

Bandwidth  SYG ----- 20 -----

nm IF=20mA

SDR ----- 2.0 2.4

Forward Voltage VF SYG ----- 2.0 2.4 V IF=20mA

Viewing Angle 2θ1/2 ----- 130 ----- deg IF=20mA

Reverse Current IR ----- ----- 10 A VR=5V

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

93-22SDRSYGC/S530-A3/TR8

Typical Electro-Optical Characteristics Curves(SDR)

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

93-22SDRSYGC/S530-A3/TR8

Typical Electro-Optical Characteristics Curves(SYG)

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

93-22SDRSYGC/S530-A3/TR8

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is 0.1mm,Unit = mm



EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

93-22SDRSYGC/S530-A3/TR8

Carrier Tape Dimensions: Loaded quantity per reel 1000 PCS/reel

Note: Tolerances Unless Dimension 0.1mm Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

93-22SDRSYGC/S530-A3/TR8

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level90%

LTPD10%

No. Items Test Condition

Test

Hours/Cycles

Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 2605

Min. 5 sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100 15min

 5 min

L : -40 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100 5min

 10 sec

L : -10 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA / 25 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85/85%RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

93-22SDRSYGC/S530-A3/TR8

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 605 for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350 for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more

intervals, and do soldering of each terminal. Be careful because the damage of the product is often

started at the time of the hand solder.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 11

Device No. : DSE-932-034 prepared date: 19-Aug-2005 Prepared by: Venis Wu

93-22SDRSYGC/S530-A3/TR8

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

E

VERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com