9/2016 EMI/EMP Filter Protection Connectors FOR MILITARY, AEROSPACE AND HARSH ENVIRONMENTS Protection of Sensitive Circuits Filter AMPHENOL CORPORATION 40-60 Delaware Avenue, Sidney, NY 13838-1395 * 800-678-0141 * www.amphenol-aerospace.com EMI/EMP Filter Protection G TABLE OF CONTENTS FOR SECTION G Filter Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 EMI Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 4 Filter Connector Options/Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6 Filter Selection Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Effect of Temperature on EMI Filter, Attenuation Curves . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Impedance Matching Formula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Quality Assurance Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Insert Arrangements Chart and Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-22 Filter Connector Shell Styles: How to Order-Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24 How to Order-Special/EMI Check Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Filter MIL-DTL-38999, Series III - FTV Aluminum / FCTV Composite . . . . . . . . . . . . . . . . 26 Filter MIL-DTL-38999, Series III - FCTV Composite Shell Styles . . . . . . . . . . . . . . . . . . . . 27-30 Filter MIL-DTL-38999, Series III - FTV Aluminum Shell Styles . . . . . . . . . . . . . . . . . . . . . . 31-36 Filter MIL-DTL-38999, Series II - FJT, FJTP Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-43 Filter MIL-DTL-38999, Series I - FLJT Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-53 Filter SJT Series (MIL-DTL-38999 type) - FSJT Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . 54-57 Filter MIL-DTL-38999 Series IV - FBL Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-60 Filter MIL-DTL-26482 - FPT Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-67 Filter "AN" Series, MIL-DTL-5015 - FAN Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 69 Filter Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Transient Protection MOV (Metal Oxide Varistor) Connectors . . . . . . . . . . . . . . . . . . . . . . 71, 72 Transient Protection Diode Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74 Transient Protection ESA (Energy Shunting Assembly) Connectors . . . . . . . . . . . . . . . . . 75 EMI/Transient Protection Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 1 EMI/EMP Filter Protection Connectors For Protection of Sensitive Circuits Overview Amphenol(R) EMI/EMP Protection Connectors offer the versatility of standard connectors with EMI/EMP protection for sensitive circuits. Internal housing of the EMI/EMP devices eliminates costly and bulky exterior discrete protection devices. FLJT Subminiature LJT, MIL-DTL-38999 Series I with Filter Protection. MIL-DTL-5015 Type Connectors with Filter Protection. Subminiature JT, MIL-DTL-38999 Series II with Filter Protection. Intermateable with MIL-DTL-38999 Series IV Plugs. Maintaines the standard of MIL-DTL-38999 Series IV Receptacles G 2 Page 58 FBL Page 37 FJT Page 68 Filter AN Connector FPT Miniature MIL-DTL-26482 Series I with Filter Protection. High Density HD38999 Page 44 EMI/EMP Subminiature Tri-Start, MIL-DTL-38999 Series III, Metal or Composite shells with Filter Protection. Page 61 FTV Mil-Spec Page 26 Filter Virtually all major MIL-Spec circulars can be incorporated with filter devices: * MIL-DTL-38999 * MIL-DTL-5015 * MIL-DTL-26482 * MIL-DTL-27599 * MIL-DTL-83723 * MIL-DTL-26500 * Provide 30% more contacts * Work with existing mil-specified 38999 shells * Utilize mil-qualified 39029 size 23 contact * Available in Mil-Spec or filter length shells Available in Filter, Hermetic & Epoxy Seal 2M * Ideal where space is limited * High density interconnect * Light weight * Intermateable & inter-mountable with Glenair's "Might Mouse" Available in Filter, Hermetic & Epoxy Seal For more information visit www.amphenol-aerospace.com. The Micro-Miniature Catalog 12-M1 is online or contact an Amphenol Salesperson for more information. Rectangular Rectangular Connectors available by Amphenol: * MIL-DTL-24308 D-Sub * MIL-DTL-83513 Micro D * ARINC 404/600 * DOD-83527 Rack and Panel * MIL-DTL-83733 Rack and Panel Rectangular filter interconnects are manufactured and supplied by Amphenol Canada (www.amphenolcanada.com). Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com EMI Capabilities For Maximum Design Flexibility Advantages ADVANTAGES OF FILTER CONNECTORS: * Reduction in overall weight and space with the elimination of external filter circuits * Reduction of solder junctions * Increase in reliability due to fewer connections * Fragile filter elements protected by connector shell from handling and environmental damage * Pre-testing from factory and ready for installation AMPHENOL OFFERS FILTER CONNECTORS, WHICH CAN INCLUDE: * * * * * * EMP protection using diodes EMP protection utilizing metal oxide varistors (MOV's) Filtered plug connectors Glass fused hermetic seal ESD protection Combinations of filtering devices within one connector package Filter Filtering Solutions Options PLANARS, MOV'S, AND DIODE CONTACTS EMI/EMP Amphenol provides a wide range of filtering solutions. You can select your options for your particular interference threats - VHF, UHF, MF1, HF or other filter ranges, then couple with a connector package of your choice. Or give Amphenol your custom shell design requirements for assistance in designing your unique filter solution. EMI Filter connectors are intended for use in temperatures from -55C to +125C. Attenuation will change with feedthrough current and temperature. To assure reliability, connectors may be subjected to an attenuation performance test verifying proper assembly and grounding of the filters. Attenuation data on filter per formance is stated in reference to a 50 ohm impedance system in order to allow filter performance to be more easily translated into real world impedances. Those interested in determining the expected filter performance in an impedance system other than 50 ohms may refer to page 285 of this catalog or may contact Amphenol Aerospace for further assistance. IT IS SUGGESTED THAT THE USER(S) ANALYZE THEIR SYSTEM REQUIREMENTS FOR EMI PROTECTION IN THE FOLLOWING AREAS: * * * * Working voltage (DC or AC and Frequency) Peak voltage Desired attenuation at a given frequency level Any special capacitance limitations Planar Capacitor Array Diode Contacts Assembly Capacitor and MOV Planars G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 3 EMI Capabilities For Maximum Design Flexibility, Continued Planar Capacitor Technology The Amphenol(R) EMI filter connector utilizes planar capacitor technology to provide the user with the most reliable and cost effective performance across the frequency range. (See MOV and Diode pages 71-73). PLANAR ASSEMBLY Gasket Shell Pi Type Planar Array Assembly Grounding Ring Ferrite Inductor Solder Washer or Spring Clip Oven Cured Epoxy Potting Seal Ground Electrode Contact and Planar Assembly EMI/EMP Filter Hot Electrode Grounding Ring Several array configurations are available, see page 274 for illustrations. An encapsulant of oven-cured epoxy in the rear provides: * Mechanical and thermal insulation of the ceramic elements - mechanical loading can be accomplished without capacitor damage. * Pins can be bent 90 and straightened with no damage to the filter. * Hermeticity (4.6 x 10-3 cc/sec) - prevents water from entering through the rear of the connector in high humidity environments. * Amphenol recommends using metal protection caps during cleaning operations. Contacts CONTACT OPTIONS: * Coaxial, concentric twinax, triax and quadrax contacts can be included in arrangements of filtered contacts for signal or power circuits (Please refer to the High Speed Contacts Section for High Frequency Contacts for Multi-Pin Connectors). * Filter contacts with differing cut-off frequencies can be mixed in any given insert arrangement. (ratio 100:1 typical) * Ground, insulated or filter contacts can be combined within the same connector to meet unique or changing frequency protection requirements. * Thermocouple contacts * Diodes or MOV for EMP Ferrite Interfacial Seal Hard Faced Insert Wire Terminations METHODS OF WIRE TERMINATION: * * * * Solder cup - wire termination PCB termination (Pre-tinning is available) Solderless wrap Amphenol(R) UTS (Universal Termination System) allows crimp termination. It uses crimp insertable socket contacts on conductor wires. Sockets mate with filter pins within the connector body. (Socket type M39029/57). (For further contact information, see section, 38999 Series I & II). * Weld terminal for thermocouple contacts * Compliant Pin (press fit) for epoxy * More in-depth information on attenuation is available in: L-1146, General Design Guideline for EMI Filters and/or TVS (Transient Voltage Suppression) Connectors. G 4 Also for further information ask for: L-1145, How to Specify Filter Connectors. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com Filter Connector Options ADAPTERS: FILTER PLUG: Features and Benefits: * Effective and economical method of introducing EMI filtering and/or transient protection to an installed system * Intermateable with all popular MIL-SPEC connectors * Can also be configured to provide transient protection utilizing diodes and MOVs * Space qualified components available * Quick and efficient installation * Readily available in MIL-DTL-38999 Series I, II, and III as well as MIL-DTL-26482 types For more information see page 70 Features and Benefits: * Utilized when access to receptacle is denied * Utilizes same components as standard EMI/EMP receptacles * Can be assembled to electrical harness * Alternative to connector adapter when length restrictions exist Consult Amphenol Aerospace for availability. DIODE: MOV: Features and Benefits: * Filter connector size package * Protection for 14, 31, 38 DC voltage circuits * No additional circuits required * Low impedance * Elimination of costly external suppression assemblies * Nanosecond response time For more information see pages 71, 72 EMI/EMP Features and Benefits: * Versatility with transient protection for sensitive circuits * Low capacitance diode for high speed signals * Can be used in combination with Filters and MOV's * Transients up to 200 Volts either Bipolar or Uni-polar * MIL-S-19500 Compatible * Available for Surface Mount, or "Leaded" type devices * Nanosecond response time For more information see pages 73 Filter Transient Protection ESA - ENERGY SHUNTING ASSEMBLY: Features and Benefits: * Compact unit providing lightning and EMP Protection * Eliminates per line circuit protection devices * Single surge arrestor providing space saving * Simplified assembly can be integrated with an EMI filter connector For more information see page 75 ESD High Speed ESD: HIGH SPEED: Features and Benefits: * Utilizes The Faraday Cage Principle to shunt ESD events through conductive enclosures * Maintains same physical envelopes as standard counterparts * Eliminates need for discrete components * Infinite pulse life For more information see page 75 Filter connector can incorporate high frequency coax, twinax, triax quadrax and differential twinax contact: Features and Benefits: * Eliminate discontinuities or impedance variations * High speed data transfer * Fits various RG and special cables Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 5 EMI/Transient Protection Specials EMI/EMP Filter Sealed Connectors HERMETIC & HIGH SPEED HERMETIC: AQUACON: Features and Benefits: * Leak rate of 1X10-7 cc of He/sec or less * Utilizes fused glass insert in a steel shell * Approximately 1/2 inch longer than standard series * Filter and Transient protection integration available. * Hermetically sealed High Speed Contacts available For more information www.amphenol-aerospace.com Features and Benefits: * Underwater Use * Hermetically Sealed-Moisture/Oil Resistant 1500 PSI capability * Leak rate of 1X10-7 cc of He/sec or less * Utilizes fused glass insert in a steel shell For more information see the Aquacon catalog online at www.amphenol-aerospace.com EPOXY SEALED CONNECTORS: SEALED RECEPTACLES WITH CRIMP CONTACT: Features and Benefits: * Light weight alternative to glass sealed hermetic connector * Leak rate of 1x10-5 cc of He/sec leak rate maintained after temperature cycling, 5 cycles -55 to +125C * Available in standard and custom configurations. * Available in virtually all major MIL-SPEC circular connectors Printed Circuit Board Mount PRESS FIT CONNECTORS: PRINTED CIRCUIT BOARD MOUNT: Features and Benefits: * Solderless mounting on printed circuit boards * High speed * Low cost * Elimination of soldering thermal stress * No cold soldered joints * No short circuits * No cleaning of excess flux * Optional contact for piercing conformal board coating is available. For more information www.amphenol-aerospace.com Features and Benefits: * Allows mounting directly to a PC board, Flex circuit, and header connector * Available in Composite and Aluminum shells * Improved reliability by elimination of external spacers and washers * Stand-off shells available in different configurations For more information see page 29, 30, 35, 36, 49, 52 HEADER FOR FLEX PRINTED OR PC BOARD: G 6 Features and Benefits: * Leak rate of 1x10-5 cc of He/sec leak rate maintained after temperature cycling, 5 cycles -55 to +125C * Allows quick and reliable termination using standard M39029/57 socket contacts. * Intermateable & inter-mountable with standard 38999 Series III plugs. For more information www.amphenol-aerospace.com Features and Benefits: * Circular and rectangular * Provides easy separation of the connector from the PC board or flex * Cost savings in the manufacturing process * Assemblies can be vapor phase or wave soldered to flex/printed circuit board * Eliminates possible damage to your expensive filter ,TVS protected connectors, or Printed Circuit Boards For more information www.amphenol-aerospace.com Weight Saving COMPOSITE: Features and Benefits: * Meets MIL-DTL-38999, Series III dimensional lengths * Offers same high performance as its metal counterpart * Lightweight: 17%-70% weight savings over metal * Corrosion Resistant * Offers better environmental performance than its metal counterpart * Durable- 1500 coupling minimum See FCTV Composites on pages 27-30 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com Filter Selection Data Amphenol(R) EMI Connectors are produced with several types of filters. They are all low band pass filters with the following configurations: C L-C C-L L1 L1 1 "L-C" filters excel when the source impedance is less than the load impedance, often outperforming "PI" filters at frequencies lower than 10MHz "C-L" filters are the inverse of "L-C" filters, performing best when the source impedance is greater than the load impedance T PI 1 2 2 "T" filters combine the advantages of both the "L-C" and "C-L" filter types in one package, with superior high frequency performance. 1 C1 UNBALANCED PI L1 L2 2 L2 1 2 C2 C2 Typical of MF1, VHF and UHF designations, "PI" filters are the workhorse of the filter industry. Combining performance with cost efficiency, this three-component filter has a steep insertion loss curve, and excels at frequencies above 10MHz. "PI" filters work well with a combination of different source and load impedances CASCADED PI L1 2 C1 C1 EMI/EMP L1 L2 L1 1 2 Filter "C" filters involve a single capacitor. This simple, cost efficient design excels at low frequency performance which often exceeds the performance of multiple-component configurations. 1 2 C3 Typical of the HF1 designation, "Cascaded PI" filters contain three shunt capacitors and two series inductors, resulting in a very steep insertion loss curve, outperforming all other filter configurations at frequencies above 10MHz. 2 C1 2 C2 "Unbalanced PI" filters have all the advantages of "PI" filters, with superior performance when the source impedance is less than the load impedance. Consult Amphenol Aerospace for attenuation performance values Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 7 Filter Characteristics Attenuation Curve AAO Filter Designation MF1 * HF1 VHF1 VHF2 UHF2 UHF1 PI Casc PI PI PI PI PI Band G Band E Band C Band B 800,000 9,800 6,000 1,900 500 300 Typical Cap (pFd) 1,000,000 16,900 9,000 2,950 800 375 Max Cap (pFd) Filter Type MIL-STD-2120 Designation Min Cap (pFd) 1,600,000 24,000 12,000 4,000 1,100 450 Working Voltage, Max (VDC) 50 200 200 200 200 200 Dielectric Withstanding Voltage (VDC) **** 100 500 500 500 500 500 Insulation Resistance, Min (G-ohms) 0.25 10 10 10 10 10 Cut-off Frequency, Min (3db, MHz) 0.004 0.26 0.52 1.6 5.6 13.6 29 1 0 0 0 0 EMI/EMP Filter Insertion Loss 0.3 MHz ** Insertion Loss 1 MHz ** 46 5 3 0 0 0 Insertion Loss 3 MHz ** 73 12 9 3 0 0 Insertion Loss 10 MHz ** 80 26 19 10 2 1 Insertion Loss 30 MHz ** 80 59 40 21 8 5 Insertion Loss 100 MHz ** 80 80 62 43 22 16 Insertion Loss 300 MHz ** 80 80 72 59 38 30 Insertion Loss 64 80 68 66 56 49 VHF1 VHF2 UHF2 1 GHz ** General Specifications *** Air leakage max Operating Temp Range Max RF Current (amps) Feed-Thru Current, max, sz 22 and 23 cont Feed-Thru Current, max, sz 20 cont Feed-Thru Current, max, sz 16 cont 4.6 x 10^-3 cc/sec -55 to +125 deg C 3 5 7.5 13 Insertion Loss, Minimum MF1 HF1 UHF1 10 Insertion Loss (db) 0.1 0 -10 1 10 100 1000 -20 -30 -40 -50 -60 -70 -80 -90 G 8 Frequency (MHz) Notes: * MF1 designation is not available in size 22 and 23 contacts. ** All insertion loss values are minimum, in units of -db. Insertion loss performance will vary due to voltage, current and temperature. Consult Amphenol Aerospace for more information. *** Common for all filter types. **** Higher DWV ratings are available on request. Consult Amphenol Aerospace. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com Impedance Matching Formula (Your System to a 50 Ohm System) Atten (dB) = 20 log10 The following formula and example are offered in order to 1+ ZZ Z (Z + Z ) S 12 S L L determine the expected filter performance in an impedance ZS = source impedance (output) system other than 50 ohms. ZL = load impedance (input) With the attenuation expressed in 50 ohms and the transfer impedance curve shown in Figure 1 below, a designer can Z12 = transfer impedance Atten = filter performance in a system other than 50 ohms relate the expressed attenuation to the input and output impedance of their circuit. Atten (dB) = 20 log10 10(100) 1.4 x 10 (10 + 100) 1+ -2 Example: (1) Noise is 40dB above specification level at 100 MHz (2) Output and input impedance are 10 and 100 ohms (3) Amphenol(R) VHF 7000 pf filter has a 65 dB minimum attenuation at 100 MHz and +25C In this case, the 7000 pf VHF filter will give 56.3 dB which is 16.3dB below the desired reduction in noise (40dB) as stated in the above problem. Filter respectively Attenuation = 56.3dB Formula (Taken from Figure 1): 1.4 x 10-2 ohm = transfer impedance EMI/EMP for 65 dB in a 50 ohm system Attenuation vs Transfer Impedance in 50 Ohm System 140 120 Attenuation - dB 100 80 60 40 20 0 10 -4 10-3 10-2 10-1 10-0 101 Transfer Impedance - Z 12 Ohms Figure 1 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 9 Quality Assurance Testing Testing ACCEPTANCE TESTING SPECIAL TESTS/PROCESSES All filter connectors undergo extensive acceptance testing to assure product quality. An outline of standard acceptance testing performed is as follows: MECHANICAL INSPECTION * Dimensional inspection of shells, keys, keyways and mounting surfaces by either in-process inspection of components or inspection of final assemblies. * Visual inspection of contacts, inserts and seals, gaskets and surface finish of shells and hardware. In addition to the standard acceptance testing and processes, the following additional production testing and processing can be provided upon request: * Automated attenuation testing (through 100 MHz) * Attenuation testing available through 1G upon special request. Contact Amphenol Aerospace in Sidney for additional details. * Leakage inspection * Thermal cycling/shock * Burn-in * De-gassing Consult Amphenol Aerospace for further information. EMI/EMP Filter ELECTRICAL TESTS * Insulation resistance of filter contacts is checked 100% at the working voltage and to the test limit listed for each filter in the filter selection data table. * Dielectric withstanding voltage is tested on 100% of filter contacts at the voltage listed in the filter selection data table. * Capacitance is tested 100% at 1KHz. QUALIFICATIONS Amphenol(R) filter connectors have been qualified and are on periodic requalification to specification BSF-1 (available from your Amphenol representative). This is patterned after MIL-DTL-38999, modified to include mechanical and environmental testing and electrical parameters important to filter connector performance. These acceptance tests, along with exhaustive in-process inspection and testing, give Amphenol(R) filter connectors their reputation for reliability. ATTENUATION TEST CIRCUIT Network Analyzer RF Out Power Splitter Ref Signal In Return Test Sample Fixture There are multiple test stations located on the Amphenol production floor that support all in-process, final electric and qualification testing as necessary. G 10 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com MIL-DTL-38999, Series I LJT, II JT, III TV, HD Insert Availability and Identification Chart Series Series JT II 8-2n 8-3n 8-6 LJT I Series Military TV III 7-D2 7-D3 7-D4 9-3n 8-44 10-4 10-5 10-35 10-98 9-35 X X P P P P 11-4 11-4 11-5 11-6n 11-5 11-19n 11-35 11-54n X X X X A35 9-94n 9-98 11-2H 11-35 P X 9-98 11-2H 11-13 P P P P P P P P u A98 B2 B5 B23 X S X X X X S X X B35 11-98 11-98 B98 11-99 11-99 B99 X X X 10-99 12-3 X 13-4H 13-4H C4 13-8 13-8 C8 12-8 P P P** P P P P X X P/S P/S X X 12-35 12-98 14-4n 13-22 13-35 13-26n 13-32n 13-35 13-63n 13-98 13-98 15-4n 15-4n 15-5H 15-5H X C23 C35 C98 X + u P S P/S H n G D5 X X Grounded 1 2 3 1 M 6 6 M N I 7 9 2 7 M 6 M 4 M M 2 4 I 3 I 2 I 4 9 2 6 4 2 2 2 3 2 4 5 P/S P/S 6 M 13 P/S P/S P/S P/S N 19 M 13 13 P/S P/S P P/S P/S P II 4 4 I 6 6 I 7 7 P P II 3 3 P P P P P P P P I 4 4 X X 2 P/S P/S P/S P/S X X P/S P/S P/S P/S P/S P/S P/S P/S P u X X X X u X X 2 2 14-5 3 5 P P P P P u X X M 2 3 4 6 P 13-13n 12-22 2 3 4 2 I P X X X X X X X X P M M M M Total 23 22D 22M 22 20 16 12 12 10 8 8 (Coax) (Power) (Coax) (Twinax) Contacts HD I X X 13-3n 12-4 X X X 3 2 X X Service Rating P u X X P P P P Completely tooled. Majority of tooling is completed (contact Amphenol Aerospace for availability). Not tooled for 02-R. Available with Pin contacts only Available with Socket contacts only Available with Pin contacts or Socket contacts Ground plane proprietary option available. Arrg. 9-5 is exclusively ground plane type. Not Mil-Qualified. 21-75 is Mil-Qualified with twinax contacts only. Note: MS connector 21-75 is supplied with size 8 twinax. Commercial connector 21-75 is supplied with size 8 coax. P I 8 I, Fiber Optic 4 M 22 M N 8 32 M 22 l 4 I 10 I 4 II 5 * ** *** (2) (3) (5) EMI/EMP 10-13 9-44 NA A23 9-22n 9-35 Crimp Class Class TV* H Y X X X 9-6 9-7n Contact Size Hermetics Filter 8-97n 8-98 P X X 9-5Hn 9-9n 8-35 III MIL-DTL27599 JT/LJT Solder 13 19 8 2** 2 22 32 6 2 22 2 2 10 4 5 HD designates High Density 38999 Series III insert patterns which use size 23 contacts only. Not rated over 175C. Hermetic inserts - solder termination standard. (Contact Amphenol Aerospace for optional PCB or eyelet termination). Two size 16 contacts dedicated to fiber optics. See the Fiber Optic section for more information. For use in MIL-STD-1760 applications. For RG 180/U and RG 195/U cables only. Size 8 Coax and Twinax are interchangeable. Not Tooled for RP or 02RE Pin inserts only, not tooled for RP or 02RE (Consult Amphenol Aerospace for avail.) MS Connector 21-79 has provision for two size 8 coax contacts. Coax contacts are not supplied unless specified by customer. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 11 MIL-DTL-38999, Series I LJT, II JT, III TV, HD Insert Availability and Identification Chart Series Series JT II LJT I Series TV III Military MIL-DTL27599 III JT/LJT Solder 14-15 15-15 15-15 D15 15-18 15-18 D18 15-19 15-19 D19 15-35 15-35 D35 14-18 14-19n X X X X X X X X X X X X X X X 14-35 14-37 X X 15-37 15-55n 2 3 X X X 15-68n 14-97n Filter 15-97 17-2 D97 E2 X X 16-6 17-6 17-6 17-8H E8 X X EMI/EMP 16-13n 17-13n 17-22n 17-22Hn 17-25n 17-26 17-26 E26 X X 17-35 17-35 E35 X 2 X X X X X P 16-35 16-42 17-42n 17-52n X 16-55 X X 17-55 17-99 19-ADn E99 F11 F18 18-28 19-28n 19-28 F28 18-30 19-30n P P P P P P P P P P/S P P P P/S P/S P/S P P X X X X X P/S P/S X X X X 19-32 19-32 F32 19-35 19-35 F35 18-53 P P P/S P/S P P P P P/S P/S X X X 19-66 19-67n X 18-68n 19-68n 19-68 P P P X 3 18-96n P P X P X X X X X X P X X 3 2 X 18-66 P P 2 P 19-53n P/S P/S P P P P S P/S P/S P P P P S S 2 21-1 P X 18-35 20-1 P u 2 X X X X P P X X 19-31n 18-32 19-88n P u X 18-11 19-11H 19-11H 19-18 19-18 P P P/S P P P E73 16-99 17-99 P P P/S P P P u 16-26 17-60n 17-73n P P/S P/S P/S u X X X X 2 2 E6 16-8 17-8H P P/S P/S P/S D23 14-68n 15-97 17-2 Contact Size Hermetics Crimp Class Class TV* Service Total H Y Rating Contacts F23 X X P P/S P P/S P P 23 HD 22D 22M 22 20 16 12 I I 15 15 14 14 I 18 18 I 19 19 M 37 37 55 1 8 I 12 M 39 I 6 II 8 8 13 13 4 24 I 26 M 55 M 42 M 2 M 55 I/Coax N 10 73 8 8 37 N I 10 1 1 M Coax M 12 (Coax) (Power) (Coax) (Twinax) 37 55 8 8 4 38 1 6 2 22 2 2 26 55 42 2 55 8 2 73 I 23 21 Inst. 17 16 II 11 2 1 11 M 18 I 28 14 26 2 4 I 30 29 1 M 15 I 32 M 66 M 53 M 66 66 M 67 67 I 18 I N 9 88 M 79 12 1 2 32 66 53 18 9 88 79 G 12 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com MIL-DTL-38999, Series I LJT, II JT, III TV, HD Insert Availability and Identification Chart Series Series JT II LJT I Series Military TV III III MIL-DTL27599 JT/LJT Solder Crimp 20-2 X X 3 X X X 21-2n 20-11n 21-11H 21-11H G11 20-16 21-16H 21-16H 21-25n 21-27n 21-29n G16 X X 21-35 21-39 G39 20-41 G41 G75 X X X X 2 2 23-1 22-2 23-6Hn 22-21 H21 22-32 23-32n 23-34n X X X X X 23-35 23-35 H35 23-53 23-53 23-54 n H53 22-55 X X H55 u u P P P P P P P P/S P/S P P P P/S P/S P P 25-1 25-2 24-4 J4 J7 J8 J11 P P P P P P u u J19 J20 2 II 16 I I I 25 27 27 M 79 I I P M M 100 M 85 M 6 I 14 II 21 I 32 I 34 M 100 M 128 M 100 I 56 M Twinax Twinax N M 99 8 11 42 I 19 N 30 8 8 4 2 (4) (5) 16 41 4 19 121 10 11 41 II N 12 (Coax) (Power) (Coax) (Twinax) 65 2 16 11 151 Completely tooled. Majority of tooling is completed (contact Amphenol Aerospace for availability). u Not tooled for 02-R. P Available with Pin contacts only S Available with Socket contacts only P/S Available with Pin contacts or Socket contacts H Ground plane proprietary option available. Arrg. 9-5, 26-62 is exclusively ground plane type. n Not Mil-Qualified. G 21-75 is Mil-Qualified with twinax contacts only. * Hermetic inserts - solder termination standard. (Contact Amphenol Aerospace for optional PCB or eyelet termination). 16 12 37 II II N P 20 39 55 u 22 4 I P 22D 22M 25 27 19 53 P X X 24-19n 11 53 P u 2 I I P X X X X X X X 65 M H23 24-2 25-19H 25-19H 25-20n 25-20*** P P P X X 24-1 M N P P P X X P X X X X 22-53n 25-4 25-7 25-8H 25-11*** 25-17n P P/S P/S X X X P 22-35 25-4 25-7n P Total 23 Contacts HD 4 79 17 121 100 85 6 EMI/EMP 2 2 23-14n 23-14n 23-55 23-55 23-97n 23-99n 23-151 n P X X X X X P X X 22-14n X + P P P/S P/S P P P P P P P/S P/S X 23-21H 23-21H P G23 22-1 23-2 23-6Hn Service Rating TV* Filter 21-41 21-41 21-75H 21-75HG 21-79n 21-79n 21-121n Y P/S P/S P P X X X X X X X G35 20-39 21-39 H X 20-35 21-35 Contact Size Hermetics 14 21 32 34 100 53 40 9 4 55 16 11 151 128 100 48 8 97 2 8 2 9 36 6 19 10 13 4 3 HD designates High Density 38999 Series III insert patterns which use size 23 contacts only. Not rated over 175C. ** Two size 16 contacts dedicated to fiber optics. See the Fiber Optic Section for more information. *** For use in MIL-STD-1760 applications. For RG 180/U and RG 195/U cables only. Size 8 Coax and Twinax are interchangeable. (2) Not Tooled for RP or 02RE (3) Pin inserts only, not tooled for RP or 02RE (Consult Amphenol for avail.) (4) MS connector 21-75 is supplied with size 8 twinax. Commercial connector 21-75 is supplied with size 8 coax. (5) MS Connector 21-79 has provision for two size 8 coax contacts. Coax contacts are not supplied unless specified by customer. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 13 MIL-DTL-38999, Series I LJT, II JT, III TV, HD Insert Availability and Identification Chart Series Series JT II LJT I Series Military TV III III MIL-DTL27599 JT/LJT Solder Crimp H Y X X P P P P 24-24 25-24H 25-24H 25-26nH J24 25-29H 25-29H J29 X X X X X X 3 X 24-35 25-35 J35 24-37 25-37H 25-37H J37 25-43 25-46 J43 J46 24-43n 25-43 25-46 24-61 EMI/EMP Filter 25-61 X u P H n Total 23 22D 22M 22 20 16 12 12 10 8 8 8 TV* Service (Coax) (Power) (Coax) (Twinax Quadrax Rating Contacts HD F 24-29 25-35 Contact Size Hermetics 25-61 25-62nH 25-90 25-187n 25-F4n J61 X 2 2 X X P P P P P u u X X X P P P P P u u J23 X I 24 I 25 12 12 16 5 I 29 New M 128 I 37 37 I 43 23 20 4 29 128 I 46 40 4 I 61 61 I I N M/I 12 46 187 66 8 40 4 2 4 2 187 13 4 49 HD designates High Density 38999 Series III insert patterns which use size 23 contacts only. Not rated over 175C Completely tooled. Not tooled for 02-R. Pin inserts only (contact Amphenol Aerospace for socket availability). Ground plane proprietary option available. Arrg. 9-5, 25-62 is exclusively ground plane type. Not Mil-Qualified. TV Series III SELECT SHELL SIZE - SPECIAL INSERT ARRANGEMENT (Not Mil-Spec Qualified) Contact Size Shell Size- Crimp Insert Arrg. 9-2 X 15-4 X 15-25 X 15-AT X 17-20 X 21-12 X 21-21 X 21-99 X 25-92 X 25-97 X Hermetics* Service Rating I II M I M I M/Inst. M M M Total Contacts 2 4 25 13 20 12 41 16 101 42 Comments 22D Formerly Pyle Formerly Pyle Formerly Pyle Formerly Pyle Formerly Pyle Improved sealing Formerly Pyle Formerly Pyle Formerly Pyle 25-16 25L-3 25L-7 33-3 33-5 33-6 37-5 X X X X X X X Service Rating M II II II II II II Total Contacts 8 3 7 3 5 6 4 22D 20 8 6 1 7 2 4 32 5 92 26 0 2 2 1 5 4 3 16 3 Contact Size Hermetics* 12 4 3 22 10 - SPECIAL INSERT ARRANGEMENT Crimp 16 2 Select Non-Standard Shell Size Shell SizeInsert Arrg. 20 2 4 4 9 9 11 9 3 13 X Completely tooled. + Majority of tooling is completed (contact Amphenol Aerospace for availability). u Not tooled for 02-R. P Pin inserts only (contact Amphenol Aerospace for socket availability). H Ground plane proprietary option available. Arrangement 9-5, 25-62 is exclusively ground plane type. n Not Mil-Qualified. * Hermetic inserts - solder termination standard. (Contact Amphenol Aerospace for optional PCB or eyelet termination). ** Two size 16 contacts dedicated to fiber optics. See the Fiber Optic section for more information. *** For use in MIL-STD-1760 applications . For RG 180/U and RG 195/U cables only. Size 8 Coax and Twinax are interchangeable. Note: 25L-3 and 25L-7 require longer shells. G (Insert arrangements requiring non-standard shells or larger contacts) 14 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com MIL-DTL-38999, Series I LJT, II JT, III TV, HD Insert Arrangements Front face of pin inserts illustrated Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size A A C B 7-D2 M 2 22D B 7-D3 M 3 22D A B 8-2 8-3 9-3 B M 2 20 A C 10-4 11-4 11-4 I 4 20 11-2 11-2 I 2 16 J P G I 6 20 M 13 22M B 18 D H G S R F N K U C J D H R S 17-2 17-2 M 1 8 Twinax 4 A C B G G 1 F 31 21 16-6 17-6 17-6 I 6 12 HD: High Density HD38999 (use size 23 contacts only) 1 4 A K 3 B H H F C E D 16-8 17-8 17-8 II 8 16 C B F CONTACT LEGEND I 8 16 11 12 21 12 16 D E 1 2 13 14 16 3 15 22 23 17 8 24 19 7 4 18 6 5 17-25 M 2 2 12 Coax 8 Coax 10 C 20 9 17-22 17-22 Coax 8 B 14-97 15-97 15-97 I 8 4 20 16 10 I 13 16 A M F C 16-13 17-13 L G D B K J C E D E B C H D G A 14-5 15-5 15-5 II 5 16 A C II 3 16 D B H 15-55 HD N 55 23 M 12-3 13-3 E 14-68 15-68 L N A F 52 B B A 46 K A J D G 14-37 15-37 M 37 22M A C C 14-4 15-4 15-4 I 4 12 24 31 39 55 A D 16 47 53 11 8-98 9-98 9-98 I 3 20 10-99 11-99 11-99 I 7 20 9 10 17 25 32 14-35 15-35 15-35 M 37 22D C E 40 G B J B B D C 10-98 11-98 11-98 I 6 20 21 D F G E B 12-98 13-98 13-98 I 10 20 13-63 I 2 2 16 12 A F F F D H A A B M 2 2 22M 20 A C B 22 9-94 M 2 20 E 11-54 II 4 22D C 8-97 M 4 22 D 10-35 11-35 11-35 M 13 22D E 14-19 15-19 15-19 I 19 20 C 11 5 6 12-35 13-35 13-35 M 22 22D 31 C B 30 3 B A D 7 2 12 1 P V T E 17 38 22D 21 13-32 HD N 32 23 E 6 8 B A 8-44 9-44 D A M L 14-18 15-18 15-18 I 18 20 1 16 10 1 11 13 C D 13-26 M 6 2 22D 12 A M N B T U P J 9 I 2 20 D 2 3 8-35 9-35 9-35 M 6 22D C A 1 4 2 32 L K 9-9 HD N 9 23 1 3 1 1 A B 11-19 HD N 19 23 29 M 22 22M 1 Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size 4 5 6 12-22 13-22 14-15 15-15 15-15 I 14 20 3 5 4 6 A 9-22 12 1 2 13 11 18 14 3 19 10 17 15 4 9 16 5 8 6 7 2 12 10-13 11-13 E E F M 7 22M 11-6 22 C L A M B C R N H M 6 22M 1 8 1 2 9 3 5 4 7 6 2 9-7 11 7 1 7 4 3 8-6 9-6 13 8 C F 12-8 13-8 13-8 I 8 20 9 B D D 12-4 13-4 13-4 I 4 16 10 A 1 20 5 EMI/EMP H 9-5 Grounded 1 8 Twinax E 10-5 11-5 11-5 I 5 20 B E C C A G F B D B 6 1 2 3 F A B 5 4 6 M 3 20 E D K Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size C A B 7-D4 M 4 22D D A A Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size A D C Filter Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size B 20 22 22D 22 2 8 Coax 22M 22D 23 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 15 MIL-DTL-38999, Series I LJT, II JT, III TV, HD Insert Arrangements Front face of pin inserts illustrated A R Pa S N U b Z V E W X G F Y L K J H 10 Filter 17 1 32 40 25 53 31 16 P N X L Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size T UC D V W K J G H f V B K R K P d N c K E J Z D X E H Y 17 24 32 41 49 58 42 50 4 59 71 67 F 43 8 22D A U J 33 42 50 M T 10 17 25 34 43 51 K J 1 16 17 58 64 1 25 J S Shell Size & Insert Arrg. for: Series II JT Series I LJT R G 3 16 CONTACT LEGEND 88 G E J 52 59 65 16 24 33 42 50 57 67 3 64 9 63 16 24 34 C 18-66 19-66 19-67 M 53 22 M 66 22M M 67 22M 8 7 9 19-88 HD N 88 23 12 16 20 I 9 12 22 22M 22D 23 16 20 19-AD Inst. 1 8 Twinax 21 41 65 79 21 31 61 71 61 51 41 8 18-96 51 58 1 31 51 3 5 10 D 43 18-53 19-53 4 12 F E 10 2 A 44 1 66 9 1 11 F I 18 16 8 B 13 18-68 19-68 Series III TV Service Rating Number of Contacts Contact Size G D P H H 73 84 35 10 2 31 11 16 14 15 55 C N U A 31 M K 1 30 B W E I 4 18-35 19-35 19-35 M 66 22D f X F Y G H 29 20 4 41 g Z C V D 18-30 19-30 1 57 a B U e b L F 21 66 63 24 E d T c G H 53 52 G X 18-28 19-28 19-28 M 26 2 20 16 51 58 3 16 D Y 51 9 W N A S R P C Z K 2 8 Coax 1 A L 66 73 17-73 HD N 73 23 B V a L 2 F 17-60 I/Coax e M 4 8 Twinax 25 34 T b N 64 18-32 19-32 19-32 1 32 20 19-31 M 2 1 12 8 Coax 12 22D P D 1 W h a L M C g b 10 4 V j M E B f 3 72 d G 14 22D A 15 16 25 33 5 46 c 19-18 19-18 M U 39 S R C H J e R g S L S 31 M 55 22M B T U M C D T h Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size N 18-11 19-11 19-11 II 11 16 C N B A 24 A S E W U R P L 9 6 52 16 17-52 M 2 8 Twinax A F 16-99 17-99 17-99 I 21 2 20 16 9 7 8 2 16-55 17-55 M 42 22 G E F 55 3 B 2 3 8 10 11 K 1 1 47 53 16-42 17-42 H 40 42 46 J B Z M 39 16-35 17-35 17-35 M 55 22D A S Y 31 24 32 25 1 7 55 52 3 17 4 A 41 D 9 10 21 47 1 16-26 17-26 17-26 I 26 20 R EMI/EMP 4 C c M Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size B T 11 11 20-1 21-1 20-2 21-2 M 79 22M II 65 22 HD: High Density HD38999 (use size 23 contacts only) Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com MIL-DTL-38999, Series I LJT, II JT, III TV, HD Insert Arrangements Front face of pin inserts illustrated A J L H B K G F R D G 20-11 21-11 21-11 I 11 12 79 61 g M 20-35 21-35 21-35 M 79 22D 1 L b 8 22 79 90 25 35 46 67 77 3 66 78 5 121 21-121 HD N 121 23 12 94 d F b G C B 20 29 39 48 58 4 97 99 100 A 82 4 85 24 34 45 55 66 76 85 93 F J C D 28 38 57 22-1 23-1 22-2 23-2 M 100 22M M 85 22 K G H B P L N M C H D G 74 47 L F B E 81 19 E J K 75 11 15 D 21-79 21-79 II 17 (See Note) 22D 98 7 B A 67 96 6 A C M 21-75 21-75 N 4 (See Note) 4 12 V N H 1 9 U J K 5 95 108 116 117 e L c 20-41 21-41 21-41 I 41 20 86 2 43 55 89 99 109 f M a n p 10 7 T S P A 22 21-29 I 4 16 19 20 D 6 21 26 23 8 11 D E 27 24 R Z m t 5 14 13 12 C Y k q N B X r 2 16 56 A W g P G 1 32 33 44 56 67 16 I 27 20 s h R F H J K I 25 20 3 4 15 G J H 20 16 D F V W 21-27 j i S E c d 37 20 13 100 a n p T D Z m q C 20-39 21-39 21-39 1 5 14 23 r f e N 6 Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size h 11 Y U X K 17 U E c d 21-25 V B k P 41 Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size X j i R 71 A L T b M Y F C 2 25 EMI/EMP T S 21 W V U 31 N Z G J H 20-16 21-16 21-16 II 16 16 1 51 K E a 1 19 18 B S Filter Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size Z U a V D T E F E P S b L A R C Y W M P B X N N C H D P B S J C L M K A R A E 66 F 22-14 23-14 23-6 23-6 M 6 8 Twinax I 14 12 HD: High Density HD38999 (use size 23 contacts only) Note: MS connector 21-75 is supplied with four size 8 twinax contacts. Commercial connector 21-75 is supplied with four size 8 coax contacts. MS connector 21-79 has provision for two size 8 coax contacts. Coax contacts are not supplied unless specified by customers. CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 17 MIL-DTL-38999, Series I LJT, II JT, III TV, HD Insert Arrangements Front face of pin inserts illustrated N A M P C V T U Y J F G R P m N k z M h g L y x S n U 24 23 22 21 44 20 43 52 42 19 41 51 40 39 50 18 38 37 17 36 16 15 14 13 B p V C W D BB q r X E CC s HH Y F DD t EE u Z v a b G c H AA GG FF f w K e d J Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size A T 22-53 23-53 23-53 I 53 20 W H G A B L G C K D F 18 CONTACT LEGEND 8 10 12 20 22 T S m R P N Y 23 U V n A W B X E 2 3 59 71 16 25 35 46 67 56 77 86 F 5 G 94 95 96 97 98 99 100 4 6 7 H J 15 24 34 45 55 66 76 85 93 22-35 23-35 23-35 M 100 22D A C M B N L C P S K D R J E H G F 23-97 II 16 16 94 19 25 8 15 21 32 44 57 69 82 94 107 119 130 140 147 X h K 48 151 g 8 1 22-55 23-55 23-55 I 55 20 11 22M 22D l p Y q D AA k r Z z GG BB HH CC j y E FF s a i EE DD F x t b u w h c v g G d f e M H L J K 4 5 f Z L 4 12 23-151 HD N 151 23 16 a 1 23-99 II 11 16 M E 2 26 3 27 4 45 46 5 28 6 29 53 47 30 49 48 31 7 32 8 33 34 9 10 35 12 11 148 j I 34 20 141 E N b I 32 20 33 45 58 70 83 95 108 120 131 J k P D e c C D W V 23-34 22 H G F d R B U 22-32 23-32 25 1 Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size V 23-54 M 40 9 22D 16 12 U e f X 22-21 23-21 23-21 II 21 16 T d j A T S S C c g D A R B P h Z E H Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size K S J N b L a R X K Filter B W L EMI/EMP M 40 51 73 105 115 1 3 125 92 1 99 2 100 7 14 121 24 35 58 70 81 104 114 24-1 25-1 24-2 25-2 M 128 22M M 100 22 HD: High Density HD38999 (use size 23 contacts only) Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com MIL-DTL-38999, Series I LJT, II JT, III TV Insert Arrangements Front face of pin inserts illustrated A Z Y FF t W EE s V DD r U CC q T p S AA R k 33 s m N M Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size E f F G N A S K U P C V D N J T S G M E 1 X U W Y M V K Z a W K H 25-17 M 6 8 Twinax 10 20 F G H 24-24 25-24 25-24 I 25-20 25-20*** N 3 4 8 Twinax 12 Coax 13 16 E U V J J 24-19 25-19 25-19 I 19 12 D T L G H C S X F 2 L F R N E 6 7 3 B P D T 5 4 Y J K A B C Z P R H X 36 22D B W h Y L L D g k A R e u v n 2 8 Twinax M E 25-11 25-11*** N 2 9 20 10 25-8 Twinax 8 8 Twinax V t w p F E 84 12 16 EMI/EMP Z P d c r q R 78 97 22D C b D 99 93 28 B a K F 82 76 53 15 8 16 A S 68 L D 21 T C G 25-7 25-7 M 48 20 J C H 60 42 26 6 24-4 25-4 25-4 I U H G 75 19 K L M 94 81 67 59 41 B B H J m N P G h 32 A A 85 25 g BB n 18 f 79 74 Filter Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size KK z 24 F e JJ 72 46 1 E d y HH LL 64 16 7 D c x 29 22 C b GG u X B a w v 12 12 (With Matched Impedance) 1 A 12 R 2 13 11 18 19 10 9 Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size 17 14 20 25 21 b 4 15 22 16 59 71 82 U 94 105 115 e L Y X J H F G 24-29 25-29 25-29 I 29 16 125 f q R 7 128 121 14 24 35 47 58 70 81 93 24-35 25-35 25-35 M 128 22D 104 114 B C V W h D k X r d P E W Z g S 4 A T e D V d K 25-26 I 5 4 12 8 Coax 48 U f M 7 36 1 c N 5 6 25 C a 24 23 T 8 15 P 3 8 16 20 S B m c N p n K M L F Z a b E Y G H J 24-37 25-37 25-37 I 37 16 *** For use in MIL-STD-1760 applications. G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 19 MIL-DTL-38999, Series I LJT, II JT, III TV, HD Insert Arrangements Front face of pin inserts illustrated A P Y N R d X M c s k L K j Filter m w F g P u X t W s GG FF V q T Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size CC n R P z BB m J M 20 16 F g G W T 2 B Y v C Z D a F c m 4 25-62 I 40 20 k y h M L d x g f K e E b w n P 4 8 B X z N 8 16 H A u AA r p C e J q R 3 t s U A 6 24-61 25-61 25-61 I 61 20 K L 1 5 f G 25-46 25-46 I 4 2 16 8 Coax S H g F c d x h 40 20 7 f w y k N K M L N P z m K D D AA h i J k j 23 20 e E y KK LL DD p S PP H n V d x JJ EE MM r U w HH b E R G D a C c NN M C Z S p d L v q B b v s 8 A Z a Y t Y AA r T F B X u 25-43 25-43 25-43 I 25-41 N/Inst. 11 2 3 16 12 Coax 8 Twinax 3 20 r e N H 22 22D x f R G E b t s U c u S V D q A W C a h T b B p v E U Z n k a h J Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating Number of Contacts Contact Size U D T i V EMI/EMP g r V S p q t m C Z e n W W A Y X B G H J 25-90 I 4 2 16 8 Twinax Ground Plane Only 26 27 38 25 24 23 37 1 50 2 1 3 28 29 39 40 51 41 42 43 21 5 31 36 61 62 63 52 53 54 60 20 59 49 35 19 64 66 65 7 58 33 45 47 17 46 115 128 142 102 116 129 143 11 155 156 12 167 168 Size 22D=M, Balance =I Number of Contacts Contact Size 49 22D 176 177 13 34 15 101 87 9 Shell Size & Insert Arrg. for: Series II JT Series I LJT Series III TV Service Rating 16 59 72 86 73 10 57 48 18 45 60 8 44 56 32 46 32 55 11 20 12 33 6 22 21 3 4 4 30 184 185 14 25-F4 13 16 187 25-187 HD N 4 12 187 23 Coax contacts for RG180/U or RG195/U cable. G 20 CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23 HD: High Density HD38999 (use size 23 contacts only) Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com MIL-DTL-38999, Series III TV Special Insert Arrangements Front face of pin inserts illustrated 13 B A Shell Size & Insert Arrg. for: Series III TV Service Rating Number of Contacts Contact Size 9-2 I 2 20 D A C B 11 15-4* II 4 16 1 22 22D 3 1 B C 9 7 F D 20 16 22D 3 20 13 5 A S R 90 1 98 2 99 J E 21-99 M 5 22D 11 12 a 100 12 23 35 45 56 66 78 89 25-92 M 92 9 22D 16 97 Y G R g h w j v n k p m V X s r Z H P f u t 101 4 F c b B N e d 3 D P 4 D A L K N 17 5 M 79 C M K G 67 57 B L H 36 18 E 3 21-21 M/Inst. 32 9 22D 12 9 12 46 24 26 13 32 B 31 14 30 28 27 15 29 16 19 C 6 21-12 I 4 12 J F 7 E 17-20 M 23 24 21 G L M 8 2 A 11 12 10 22 25 8 C 6 J EMI/EMP 11 10 Shell Size & Insert Arrg. for: Series III TV Service Rating Number of Contacts Contact Size H 5 12 Shell Size & Insert Arrg. for: Series III TV Service Rating Number of Contacts Contact Size 9 B G 4 6 A K 2 7 9 8 2 3 4 5 3 16 1 D 10 1 Filter 16 14 15 B 15-AT M 16 4 22D 12 H 13 C 15-25 M J A A 2 3 15 4 16 5 24 17 6 21 25 18 7 20 19 8 9 10 14 23 22 12 C S T D U E W F 25-97 M 26 3 13 22D 16 12 NOTE: Some specials shown here were formerly known as Pyle arrangements. Consult Amphenol for how to order information for connectors with these inserts. For further information on special arrangements consult Amphenol Aerospace, Sidney NY. * Pyle 15-4 does not mate with Amphenol Tri-Start 15-4 insert. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 21 MIL-DTL-38999, Series III TV Special Insert Arrangements Non-Standard Shells or Large Contacts Front face of pin inserts illustrated F G A F C D A E H G B B E A Shell Size & Insert Arrg. for: Series III TV Service Rating Number of Contacts Contact Size 25-16 M 25L-3 II 2 4 1 8 C 25L-7 II 7 8 2 4 EMI/EMP Filter 6 20 D B C A A C E A E B D B C D Shell Size & Insert Arrg. for: Series III TV Service Rating Number of Contacts Contact Size 33-3 II 1 4 33-5 II 5 4 2 0 B F C 33-6 II 2 8 4 4 A D B C Shell Size & Insert Arrg. for: Series III TV Service Rating Number of Contacts Contact Size G 22 37-5 II 4 0 NOTE: Some specials shown here were formerly known as Pyle arrangements. Consult Amphenol for how to order information for connectors with these inserts. Consult Amphenol Aerospace for longer shell drawings. CONTACT LEGEND 0 4 8 22D Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com How to Order - Standard Filter Connectors 1. 2. 3. 4. 5. 6. 7. Filter Connector Designator Connector and Filter Type Shell Finish Shell Styles Shell Size - Insert Arrg. Type of Contact and Keyway Position Printed Circuit Board Tail Length 21 24 9 2 16-26 P 1 1. CONNECTOR TYPE 2. CONNECTOR/FILTER TYPE 21 Filter Connector 20 22 24 25 26 29 31 32 33 34 36 37 38 39 40 41 46 47 48 50 51 52 53 56 57 58 61 63 64 65 73 76 77 78 79 80 81 82 83 84 85 87 96 36 MOV Connector 47 Diode Connector 3. SHELL FINISH Bright cadmium 2 Stainless steel (electrolytic nickel plated) 4 Electroless nickel, MS (F) 5 Gold plate over nickel 7 Cadmium plate over nickel, MS(A) 8 Bright nickel 9 Cadmium plate, nickel base, OD, MS(B), (500 hr. salt spray test) D DurmalonTM Nickel-PTFE (cadmium alternative) - 38999 Class T refer to page 5 Z Black Zinc 4. SHELL STYLE 0 Wall mount receptacle 2 Box mount receptacle 3 Jam nut receptacle with rear thread (PT only) 4 Minimum penetration jam nut receptacle 7 Jam nut receptacle 5. SHELL SIZE AND INSERT ARRANGEMENT 8 through 24 Shell sizes available for FJT, Series II 9 through 25 Shell sizes available for FLJT, Series I, TV, Series III and the FBL Series IV Shell Size & Insert Arrangements are together in one chart. First number represents Shell Size, second number is the Insert Arrangement. See pages 11-22 FJT with VHF-1 filter FJT with 8 volt diode/VHF-1 filter combination FAN with VHF-1 filter FLJT with VHF-1 filter FPT with MF-1 filter FJT with MF-1 filter FPT with HF-1 filter (long shell) FJTP with VHF-1 filter FLJT with HF-1 filter (long shell) FJT with HF-1 filter (long shell-min. penetration also available) FJTP with HF-1 filter (long shell) FJTP with MF-1 filter FLJT with MF-1 filter FJT (UTS-crimp) with VHF-1 filter FPT (UTS-crimp) with VHF-1 filter FLJTPQ with VHF-1 filter FLJTPQ (UTS-crimp) with VHF-1 filter FTV (UTS-crimp) with VHF-1 filter EMI/EMP 1 FPTE with VHF-1 filter Filter 0 Chromate FPT with VHF-1 filter FTV (UTS-crimp) with HF-1 filter (long shell) FTV with VHF-1 filter FTV with HF-1 filter (long shell) FJTP (UTS-crimp) with VHF-1 filter FLJT with VHF-1 filter (printed circuit board mount, mod. flange) FJTPQ (UTS-crimp) with VHF-1 filter FBL with VHF-1 filter FSJT with VHF-1 filter FBL (UTS-crimp) with VHF-1 filter FSJT (UTS-crimp) with VHF-1 filter M83723 bayonet coupling with VHF-1 filter FCTV with VHF-1 filter with composite shell FTV with VHF-1 filter and standard series III shells FCTV PCB mount with standard flange and VHF-1 filter Same as 77 with no filter - Epoxy sealed FTV PCB mount with standard flange, standard nut and VHF-1 filter Same as 80 with no Filter - Epoxy sealed FTV with 8 volt diode/VHF-1 filter combination FSJT with 8 volt diode/VHF-1 filter combination FTV (UTS-crimp) with 8 volt diode only Same as 76 with no filter - Epoxy sealed FLJT (UTS-crimp) with 8 volt diode/VHF-1 filter combination FPT (UTS-crimp) with VHF-1 filter for 2000 Volts Federal Vendor Identification/FSCM 77820 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 23 How to Order - Standard Filter Connectors 6. TYPE OF CONTACT P Pins in a normal rotation S Socket in a normal rotation ALTERNATE ROTATION SUFFIX LETTERS EMI/EMP Filter FJT, FLJT or FSJT FTV FCTV Suffix Letter FPT Suffix Letter FBL Series IV Suffix Letter FAN Suffix Letter Suffix Letter Alternate Position Pins Normal P S Normal P S Normal P S Normal P S Normal P S A E F A G H W G H A E F W G H Alternate Sockets Position Alternate Pins Sockets Position Alternate Pins Sockets Position Pins Alternate Sockets Position Pins Sockets B R T B I J X I J B G H X I J C W X C K L Y K L C J L Y K L D Y Z D M N Z M N D R T Z M N E R T K W X 12 C D 13 A B Rotations 7. (OPTIONAL) THIS WILL CHANGE CONNECTOR TO PCB TERMINATION FROM DEFAULT SOLDER CUP Code 1 2 3 4 5 6 .030 0.120 0.185 0.270 Pre-Tinned? NO YES NO YES NO YES Note: -2XX Suffix G 24 Unable to find what you are looking for under our "How to Order" page 23?. Fill out our EMI Check Sheet on page 25 and send it to Filterapps@amphenol-aao.com or call us directly at 800-678-0141 Any combination of filters, non-filters, grounds, and non-standard contact terminations will require -2XX suffix. Please consult Amphenol Aerospace for assistance in setting up these part numbers. * Standard voltage for diode is 8 volts. Any deviation requires a -2XX suffix. * Standard voltage for a MOV is 47 volts. Any deviation requires a -2XX suffix. * Standard diode/filter combination is 8 volt/VHF-1 filter. Any deviation requires a -2XX suffix. * Standard MOV/filter combination is 47 volt/VHF-1 filter. Any deviation requires a -2XX suffix. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com How to Order - Special Filter Connectors (EMI Check Sheet) Unable to find what you are looking for under our "How to Order" page? Fill out our EMI Check Sheet and send it to Filterapps@amphenol-aao.com or call us directly at 800-678-0141 Date_______________________________ Ref. Filter P/N _________________________________ Ref. Mil-Spec_________________________________________ Filter Requirements: Filter Type (Pi, C, LC, T, LL, other)_________________________________________________________________________ Capacitance (locations) _________________________________________________________________________________ Capacitance (locations) _________________________________________________________________________________ Capacitance (locations) _________________________________________________________________________________ Ground Contacts (locations) _____________________________________________________________________________ Insulated feed-thru (locations) ____________________________________________________________________________ Frequency (MHz) Insertion Loss (dB) 1 3 10 30 100 Special Requirements: (AC voltage, spike voltage, attenuation testing, thermal cycling, burn-in, capacitor lot traceability, water immersion, etc.) ________________________________________________________________________ _______________________________________________________________________________________________________ _______________________________________________________________________________________________________ EMI/EMP Modified Shell: (Flange moved, clinch nuts, helicoils, stand-offs, etc.) _________________________________________ _______________________________________________________________________________________________________ _______________________________________________________________________________________________________ Filter Electrical Requirements: Working Voltage (VDC or VAC and frequency) ______________________________________________________________ Dielectric Withstand Voltage (VDC) _______________________________________________________________________ Contact Termination: UTS (Crimp) ___________________________________________________________________________________________ Solder Cup ____________________________________________________________________________________________ Compliant Pin __________________________________________________________________________________________ Wire Wrap Flat dim. ________________________________________________________________________________ Stickout dim. ____________________________________________________________________________ PCB tail: Diameter dim. _________________________________________________________________________________________ Stickout dim. __________________________________________________________________________________________ Pre-tin? _______________________________________________________________________________________________ What is terminated to connector (ie. flex, rigid flex, PCB, etc.)? ________________________________________________ _______________________________________________________________________________________________________ _______________________________________________________________________________________________________ Special Cleaning ________________________________________________________________________________________ (if so, recommend a protective cap with an environmental gasket) Special Stamping: ______________________________________________________________________________________ Customer: _____________________________________________________________________________________________ Program: ______________________________________________________________________________________________ Forecast: ______________________________________________________________________________________________ Requested by: __________________________________________________________________________________________ Comments: ____________________________________________________________________________________________ ________________________________________________________________________________________________________ __________________________________________________________________ Email to Filtersapps@amphenol-aao.com Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 25 FTV Aluminum & FCTV Composite 38999, Series III Features, Alternate Rotations The Amphenol(R) FTV Series III, demonstrates unsurpassed technical leadership. With added filter features, the high performance general duty threaded connector is designed to withstand the pressures of severe environment applications. The FCTV Series is the Composite Series III with filtering for EMI/EMP protection. It offers the same high performance as its metal counterpart, the FTV, but with a lightweight, corrosion resistance shell. EMI/EMP Filter FTV & FCTV COMPOSITE INTERMATEABLE WITH MIL-DTL-38999 SERIES III CONNECTORS * Quick Mating - completely mates in a 360 turn of the coupling nut * Lockwiring Eliminated - incorporates anti-decoupling device * Contact Protection - 100% "scoop-proof" * Improved Moisture Resistance - prevents electrolytic erosion of contacts * Lightweight Composite Shell - 17% - 70% weight savings over metal * Corrosion Resistant - available in standard MIL-DTL-38999 olive drab cadmium (175C) and electroless nickel plating (200C), both withstanding 2000 hours of salt spray exposure. The base material is able to withstand an indefinite exposure to salt spray. * Durability - 1500 couplings minimum (in reference to connector couplings, not contacts) Key & Keyway arrangement identification letter AR or AP BSC BR or BP BSC CR or CP BSC DR or DP BSC N A B C D E 105 102 80 35 64 91 140 132 118 140 155 131 215 248 230 205 234 197 265 320 312 275 304 240 11, 13, 15 N A B C D E 95 113 90 53 119 51 141 156 145 156 146 141 208 182 195 220 176 184 236 292 252 255 298 242 17 and 19 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 21, 23, 25 N A B C D E 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 9 26 Composite FCTV Connector for PCB board mounting. Amphenol is currently the only supplier of one-piece composite PCB stand-off shells. FTV & FCTV Key/Keyway Positions Shell Size G FTV (front face shown) MAIN KEY PLUG AP BSC BP BSC CP BSC DP BSC MAIN KEYWAY RECEPTACLE AR BSC BR BSC DR BSC CR BSC FCTV All angles are BSC The insert arrangement does not rotate with main key/keyway. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FCTV - MIL-DTL-38999, Series III Composite Wall Mounting Receptacle Commercial PART NUMBER BUILDER Page G23-25 COMPOSITE 21-76X0 21-85X0 S 1.240 MAX. R1 M R2 K R1 S * R2 21-76X0 21-85X0 EMI/EMP B THREAD T 4 PLACES TT 4 PLACES Filter V THREAD .005 M *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. Shell Size B Thread Class 2A 0.1P-0.3L-TS (Plated) M +.000 -.005 K .0025 R1 TP R2 TP S +.011 -.010 T +.008 -.006 TT +.008 -.006 V Thread Metric (Plated) 9 .6250 .773 .1378 .719 .594 .938 .128 .216 M12X1-6g0.100R 11 .7500 .773 .1378 .812 .719 1.031 .128 .194 M15X1-6g0.100R M18X1-6g0.100R 13 .8750 .773 .1378 .906 .812 1.125 .128 .194 15 1.0000 .773 .1378 .969 .906 1.219 .128 .173 M22X1-6g0.100R 17 1.1875 .773 .1378 1.062 .969 1.312 .128 .194 M25X1-6g0.100R 19 1.2500 .773 .1378 1.156 1.062 1.438 .128 .194 M28X1-6g0.100R 21 1.3750 .741 .1654 1.250 1.156 1.562 .128 .194 M31X1-6g0.100R 23 1.5000 .741 .1654 1.375 1.250 1.688 .154 .242 M34X1-6g0.100R 25 1.6250 .741 .1654 1.500 1.375 1.812 .154 .242 M37X1-6g0.100R All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 27 FCTV - MIL-DTL-38999, Series III Composite Jam Nut Receptacle Commercial PART NUMBER BUILDER Page G23-25 COMPOSITE 21-76X7 21-85X7 1.280 MAX. A .890 MAX. S Filter W * EMI/EMP Z* FLAT 21-76X7 21-85X7 V THREAD B THREAD R THREAD T* H HEX .062 -.125 PANEL THICKNESS *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. D shaped mounting hole dimensions G 28 V Thread Metric (Plated) Z* Flat +.000 -.010 Shell Size A Dia. .010 B Thread Class 2A 0.1P-0.3L-TS (Plated) 9 1.188 .6250 .875 M17X1-6g0.100R 1.062 .697 M12X1-6g0.100R .086 .669 11 1.375 .7500 1.000 M20X1-6g0.100R 1.250 .822 M15X1-6g0.100R .086 .769 H Hex +.017 -.016 R Thread Metric (Plated) S .015 T* +.010 -.000 W +.035 -.004 13 1.500 .8750 1.188 M25X1-6g0.100R 1.375 1.007 M18X1-6g0.100R .086 .955 15 1.625 1.0000 1.312 M28X1-6g0.100R 1.500 1.134 M22X1-6g0.100R .086 1.084 17 1.750 1.1875 1.438 M32X1-6g0.100R 1.625 1.259 M25X1-6g0.100R .086 1.208 19 1.937 1.2500 1.562 M35X1-6g0.100R 1.812 1.384 M28X1-6g0.100R .118 1.333 21 2.062 1.3750 1.688 M38X1-6g0.100R 1.938 1.507 M31X1-6g0.100R .118 1.459 23 2.188 1.5000 1.812 M41X1-6g0.100R 2.062 1.634 M34X1-6g0.100R .118 1.575 25 2.312 1.6250 2.000 M44X1-6g0.100R 2.188 1.759 M37X1-6g0.100R .118 1.709 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FCTV - MIL-DTL-38999, Series III Composite Box Mount Receptacle (Printed Circuit Board Mount) Commercial PART NUMBER BUILDER Page G23-25 COMPOSITE 21-78X2 S 2 PLACES .673 .002 .132 .020 R1 2 PLACES M SEE NOTE 1 45 Filter 21-78X2 * (4) CORROSION RESISTANT STEEL .112-40 UNC-3B SELF-LOCKING CLINCH NUTS PER MIL-N-45938/6-4C .005 M W 2 PLACES (4) CORROSION RESISTANT STEEL .112-40 UNC-3B INSERTS .005 T A M EMI/EMP K MAX. PANEL THICKNESS B THREAD *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Please consult Amphenol Aerospace for additional lengths. Shell Size 9 A Dia. .005 1.016 B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 PCB Mounting Dimensions M +.003 -.003 .770 K Max. Panel Thickness .234 R1 TP .719 S +.011 -.010 .938 T Dia. TP .752 W TP .532 11 1.148 .7500 .770 .234 .812 1.031 .850 .601 13 1.250 .8750 .770 .234 .906 1.125 .994 .703 15 1.375 1.0000 .770 .234 .969 1.219 1.119 .791 17 1.500 1.1875 .770 .234 1.062 1.312 1.237 .875 19 1.625 1.2500 .770 .234 1.156 1.438 1.379 .975 21 1.750 1.3750 .738 .204 1.250 1.562 1.489 1.053 23 1.875 1.5000 .738 .204 1.375 1.688 1.619 1.145 25 2.000 1.6250 .738 .204 1.500 1.812 1.744 1.233 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 29 FCTV - MIL-DTL-38999, Series III Composite Jam Nut Receptacle (Printed Circuit Board Mount) Commercial PART NUMBER BUILDER Page G23-25 COMPOSITE 21-78X7 .673 .002 A .889 MAX. S .132 .020 45 Filter SEE NOTE 1 EMI/EMP Z* FLAT * B THREAD T* R THREAD H HEX 21-78X7 .062-.125 PANEL THICKNESS W 2 PLACES V (4) CORROSION RESISTANT STEEL .112-40 UNC-3B INSERTS .005 M M *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Please consult Amphenol Aerospace for additional lengths. "D" shaped mounting hole dimensions Shell Size 9 G 30 A Dia. .005 1.188 B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 H Hex +.017 -.016 .875 M Dia. .005 1.016 R Thread Metric (Plated) M17X1-6g0.100R S +.011 -.010 1.062 T* Dia. +.010 -.000 .697 PCB Mounting Dimensions W TP .532 V Dia. TP .752 Z* Flat +.000 -.010 .669 11 1.375 .7500 1.000 1.148 M20X1-6g0.100R 1.250 .822 .601 .850 .769 13 1.500 .8750 1.188 1.250 M25X1-6g0.100R 1.375 1.007 .703 .994 .955 15 1.625 1.0000 1.312 1.375 M28X1-6g0.100R 1.500 1.134 .791 1.119 1.084 17 1.750 1.1875 1.438 1.500 M32X1-6g0.100R 1.625 1.259 .875 1.237 1.208 19 1.937 1.2500 1.562 1.625 M35X1-6g0.100R 1.812 1.384 .975 1.379 1.333 21 2.062 1.3750 1.688 1.750 M38X1-6g0.100R 1.937 1.507 1.053 1.489 1.459 23 2.188 1.5000 1.812 1.875 M41X1-6g0.100R 2.062 1.634 1.145 1.619 1.575 25 2.312 1.6250 2.000 2.000 M44X1-6g0.100R 2.188 1.759 1.233 1.744 1.709 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FTV - MIL-DTL-38999, Series III Wall Mounting Receptacle - Aluminum S Commercial PART NUMBER BUILDER Page G23-25 LL R1 ALUMINUM 21-77X0 21-79X0 M R2 V THREAD EXTENDED LENGTH BELOW 21-52X0 R1 S R2 * 21-77X0 21-79X0 B THREAD 1.240 MAX. T 4 PLACES TT 4 PLACES LL +.006 -.000 .905 R1 TP .719 R2 TP .594 11 .7500 .820 .905 .812 13 .8750 .820 .905 .906 S Max .948 T +.008 -.006 .128 V Thread Metric (Plated) M12X1-6g0.100R TT +.008 -.006 .216 .719 1.043 .128 M15X1-6g0.100R .194 .812 1.137 .128 M18X1-6g0.100R .194 15 1.0000 .820 .905 .969 .906 1.232 .128 M22X1-6g0.100R .173 17 1.1875 .820 .905 1.062 .969 1.323 .128 M25X1-6g0.100R .194 19 1.2500 .820 .905 1.156 1.062 1.449 .128 M28X1-6g0.100R .194 21 1.3750 .790 .905 1.250 1.156 1.575 .128 M31X1-6g0.100R .194 23 1.5000 .790 .905 1.375 1.250 1.701 .154 M34X1-6g0.100R .242 25 1.6250 .790 .905 1.500 1.375 1.823 .154 M37X1-6g0.100R .242 Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. All dimensions for reference only. EMI/EMP M +.000 -.005 .820 Filter Shell Size 9 B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 *Note 1. Standard Printed Circuit Termination diameter .005 M S (Extended length shell**) R1 M R2 .896 MAX. R1 S * R2 V THREAD B THREAD *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) T 4 PLACES TT 4 PLACES .002 21-52X0 +.006 .905 -.000 .005 M 1.466 MAX. Shell Size 9 B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 M +.000 -.005 .820 1 R TP .719 2 R TP .594 S .010 .938 T +.008 -.006 .128 V Thread Metric (Plated) M12X1-6g0.100R TT +.008 -.006 .216 22 0.020 20 0.030 16 0.040 11 .7500 .820 .812 .719 1.031 .128 M15X1-6g0.100R .194 12 0.081 13 .8750 .820 .906 .812 1.125 .128 M18X1-6g0.100R .194 15 1.0000 .820 .969 .906 1.219 .128 M22X1-6g0.100R .173 17 1.1875 .820 1.062 .969 1.312 .128 M25X1-6g0.100R .194 19 1.2500 .820 1.156 1.062 1.438 .128 M28X1-6g0.100R .194 21 1.3750 .790 1.250 1.156 1.562 .128 M31X1-6g0.100R .194 23 1.5000 .790 1.375 1.250 1.688 .154 M34X1-6g0.100R .242 25 1.6250 .790 1.500 1.375 1.812 .154 M37X1-6g0.100R .242 Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. **Extended length accommodate higher voltage and/or higher capacitance applications. Plug movement required to clear FTV receptacles: .625 min. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 31 FTV - MIL-DTL-38999, Series III Wall Mounting Receptacle - Aluminum (UTS Crimp) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-50X0 21-50X0 UTS (Crimp ) Contact SAE AS39029/57 UTS (Crimp) Contact Filter S SAE AS39029/57 R1 R2 EMI/EMP B THREAD R1 S R2 T 4 PLACES V THREAD E TT 4 PLACES +.006 .905 -.000 .005 M G 32 .100 MAX. 1.922 MAX. Shell Size 9 B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 E +.000 -.005 .820 1 R TP .719 2 R TP .594 S .010 .938 T +.008 -.006 .128 V Thread Metric (Plated) M15X1-6g0.100R TT +.008 -.006 .216 11 .7500 .820 .812 .719 1.031 .128 M18X1-6g0.100R .194 13 .8750 .820 .906 .812 1.125 .128 M22X1-6g0.100R .194 15 1.0000 .820 .969 .906 1.219 .128 M25X1-6g0.100R .173 17 1.1875 .820 1.062 .969 1.312 .128 M28X1-6g0.100R .194 19 1.2500 .820 1.156 1.062 1.438 .128 M31X1-6g0.100R .194 21 1.3750 .790 1.250 1.156 1.562 .128 M34X1-6g0.100R .194 23 1.5000 .790 1.375 1.250 1.688 .154 M37X1-6g0.100R .242 25 1.6250 .790 1.500 1.375 1.812 .154 M41X1-6g0.100R .242 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FTV - MIL-DTL-38999, Series III Jam Nut Receptacle (Mil-Spec Length) - Aluminum Commercial PART NUMBER BUILDER Page G23-25 S ALUMINUM MIL-SPEC LENGTH 21-77X7 21-79X7 W S 21-77X7 21-79X7 EXTENDED LENGTH BELOW 21-52X7 A Dia. W .062 -.125 PANEL THICKNESS Z* FLAT Z* FLAT B THREAD A Dia. T* T* H HEX H HEX .062 -.125 PANEL THICKNESS * * V THREAD B THREAD R THREAD V THREAD R THREAD 1.280 MAX. 1.280 MAX. "D" shaped mounting hole dimensions 1.199 .697 11 1.386 .7500 1.000 M20X1-6g0.100R 1.250 .822 M15X1-6g0.100R .871 13 1.511 .8750 1.188 M25X1-6g0.100R 1.375 1.007 M18X1-6g0.100R .878 .955 15 1.636 1.0000 1.312 M28X1-6g0.100R 1.500 1.134 M22X1-6g0.100R .878 1.084 17 1.761 1.1875 1.438 M32X1-6g0.100R 1.625 1.259 M25X1-6g0.100R .878 1.208 19 1.949 1.2500 1.562 M35X1-6g0.100R 1.812 1.384 M28X1-6g0.100R .878 1.333 21 2.073 1.3750 1.688 M38X1-6g0.100R 1.938 1.507 M31X1-6g0.100R .878 1.459 23 2.199 1.5000 1.812 M41X1-6g0.100R 2.062 1.634 M34X1-6g0.100R .878 1.575 25 2.323 1.6250 2.000 M44X1-6g0.100R 2.188 1.759 M37X1-6g0.100R .878 1.709 R Thread Metric (Plated) M17X1-6g0.100R S .010 1.062 C C T* T* (Extended length shell**) T* Dia +.010 -.000 A* B THREAD "D" shaped mounting hole dimensions H HEX S Z* Flat +.000 -.010 .669 .769 R B THREAD THREAD V THREAD R THREAD M .669 .697 11 .769 .7500 1.386 1.000 .871 M20X1-6g0.100R 1.250 .822 M15X1-6g0.100R 13 .955 .8750 1.511 1.188 .878 M25X1-6g0.100R 1.375 1.007 M18X1-6g0.100R 15 1.084 1.0000 1.636 1.312 .878 M28X1-6g0.100R 1.500 1.134 M22X1-6g0.100R 17 1.208 1.1875 1.761 1.438 .878 M32X1-6g0.100R 1.625 1.259 M25X1-6g0.100R 19 1.333 1.2500 1.949 1.562 .878 M35X1-6g0.100R 1.812 1.384 M28X1-6g0.100R 21 1.459 1.3750 2.073 1.688 .878 M38X1-6g0.100R 1.938 1.507 M31X1-6g0.100R 23 1.575 1.5000 2.199 1.812 .878 M41X1-6g0.100R 2.062 1.634 M34X1-6g0.100R 25 1.709 1.6250 2.323 2.000 .878 M44X1-6g0.100R 2.188 1.759 M37X1-6g0.100R C Max 1.199 H Hex +.017 -.016 .875 M +.011 -.010 .871 R Thread (Plated) M17X1-6g0.100R S +.011 -.010 1.062 T* +.010 -.000 0.020 0.030 0.040 0.081 * V THREAD M 1.466 MAX. S .002 Standard contact termination is Solder Cup. Please consult Amphenol .976 Aerospace for MAX. additional lengths. * V Thread Metric (Plated) M12X1-6g0.100R Shell Size 9 Contact size (AWG) 22 20 16 12 A* B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 A* +.000 -.010 *Note 1. Standard Printed Circuit Termination diameter .062 MIN. .062 MIN. .125 MAX. .125.976 MAX. PANEL THICKNESSPANEL THICKNESS MAX. 21-52X7 H HEX W +.011 -.010 .871 EMI/EMP A Dia* Max V Thread Metric (Plated) M12X1-6g0.100R H Hex +.017 -.016 .875 Filter Shell Size 9 B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 1.466 MAX. **Extended length to accommodate higher voltage and/or higher capacitance applications. Plug movement required to clear FTV receptacles: .625 min. All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 33 FTV - MIL-DTL-38999, Series III Jam Nut Receptacle - Aluminum (UTS Crimp) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-50X7 UTS (Crimp ) Contact SAE AS39029/57 C .062 MIN. .125 MAX. PANEL THICKNESS Filter T* 21-50X7 EMI/EMP A* B THREAD H HEX V THREAD R THREAD .100 MAX. M S 1.922 MAX. "D" shaped mounting hole dimensions Plug movement required to clear FTV receptacles: .625 min. .669 B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 .697 V Thread Metric (Plated) M15X1-6g0.100R 11 .769 .7500 1.386 1.000 .871 M20X1-6g0.100R 1.250 .822 M18X1-6g0.100R 13 .955 .8750 1.511 1.188 .878 M25X1-6g0.100R 1.375 1.007 M22X1-6g0.100R 15 1.084 1.0000 1.636 1.312 .878 M28X1-6g0.100R 1.500 1.134 M25X1-6g0.100R 17 1.208 1.1875 1.761 1.438 .878 M32X1-6g0.100R 1.625 1.259 M28X1-6g0.100R 19 1.333 1.2500 1.949 1.562 .878 M35X1-6g0.100R 1.812 1.384 M31X1-6g0.100R 21 1.459 1.3750 2.073 1.688 .878 M38X1-6g0.100R 1.938 1.507 M34X1-6g0.100R 23 1.575 1.5000 2.199 1.812 .878 M41X1-6g0.100R 2.062 1.634 M37X1-6g0.100R 25 1.709 1.6250 2.323 2.000 .878 M44X1-6g0.100R 2.188 1.759 M41X1-6g0.100R Shell Size 9 G 34 A* +.000 -.010 C Max 1.199 H Hex +.017 -.016 .875 M .005 .871 R Thread (Plated) M17X1-6g0.100R S +.011 -.010 1.062 T* +.010 -.000 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FTV - MIL-DTL-38999, Series III Box Mount Receptacle - Aluminum (Printed Circuit Board Mount) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-80X2 21-81X2 .673 .002 .830 .005 S .132 .020 K R1 45 SEE NOTE 1 Filter * B THREAD W 2 PLACES (4) CORROSION RESISTANT STEEL HELICAL COIL WITH LOCKING THREADS .112-40 UNC-3B INSERTS .005 M V J EMI/EMP (4) CORROSION RESISTANT STEEL .112-40 UNC-3B CLINCH NUTS .005 M 21-80X2 21-81X2 *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Please consult Amphenol Aerospace for additional lengths PCB Mounting Dimensions Shell Size 9 B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 J Dia. .005 1.016 K .005 .085 R1 TP .719 S .010 .938 W TP .532 V Dia. TP .752 11 .7500 1.062 .085 .812 1.031 .601 .850 13 .8750 1.250 .085 .906 1.125 .703 .994 15 1.0000 1.375 .085 .969 1.219 .791 1.119 17 1.1875 1.500 .085 1.062 1.312 .875 1.237 19 1.2500 1.625 .085 1.156 1.438 .975 1.379 21 1.3750 1.750 .115 1.250 1.562 1.053 1.489 23 1.5000 1.875 .115 1.375 1.688 1.145 1.619 25 1.6250 2.000 .115 1.500 1.812 1.233 1.744 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 35 FTV - MIL-DTL-38999, Series III Jam Nut Receptacle - Aluminum (Printed Circuit Board Mount) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-80X7 21-81X7 .673 .002 .830 .005 A .132 .020 S 45 Filter SEE NOTE 1 Z* FLAT * 21-80X7 21-81X7 EMI/EMP B THREAD W 2 PLACES R THREAD T* H HEX .062-.125 PANEL THICKNESS V J (4) CORROSION RESISTANT STEEL HELICAL COIL WITH LOCKING THREADS .112-40 UNC-3B INSERTS .005 M *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Please consult Amphenol Aerospace for additional lengths "D" shaped mounting hole dimensions G 36 Shell Size 9 A Dia. .010 1.188 B Thread Class 2A 0.1P-0.3L-TS (Plated) .6250 H Hex +.017 -.016 .875 11 1.375 .7500 13 1.500 15 1.625 17 1.750 19 1.937 21 J Dia. .005 1.016 R Thread Metric (Plated) M17X1-6g0.100R S .015 1.062 1.000 1.062 M20X1-6g0.100R 1.250 .8750 1.188 1.250 M25X1-6g0.100R 1.0000 1.312 1.375 M28X1-6g0.100R 1.1875 1.438 1.500 1.2500 1.562 1.625 2.062 1.3750 1.688 23 2.188 1.5000 25 2.312 1.6250 T* Dia. +.010 -.000 PCB Mounting Dimensions Z* Flat +.000 -.010 .697 W TP .532 V Dia. TP .752 .822 .601 .850 1.375 1.007 .703 .994 .955 1.500 1.134 .791 1.119 1.084 M32X1-6g0.100R 1.625 1.259 .875 1.237 1.208 M35X1-6g0.100R 1.812 1.384 .975 1.379 1.333 1.750 M38X1-6g0.100R 1.937 1.507 1.053 1.489 1.459 1.812 1.875 M41X1-6g0.100R 2.062 1.634 1.145 1.619 1.575 2.000 2.000 M44X1-6g0.100R 2.188 1.759 1.233 1.744 1.709 .669 .769 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FJT - MIL-DTL-38999, Series II Features, Alternate Rotations The Amphenol(R) FJT Series space and weight saving design, coupled with a filter, gives high reliability. * Intermateable with MIL-DTL-38999/27599 Series II connectors (see Catalog 38999, Series II JT section) * Quick positive coupling - 3 point bayonet locking * Error-proof alternate positioning of shell keyways * Higher reliability and greater durability with permanently encapsulated contacts * Environmental resistant * Aluminum shells with several finish options Filter FJT FJT MASTER KEY/KEYWAY ROTATION AB Angle of Rotation (Degrees) Shell Size 8 Normal 100 A 82 B - C - 118 10 100 86 72 128 114 12 100 80 68 132 120 14 100 79 66 134 121 16 100 82 70 130 118 18 100 82 70 130 118 20 100 82 70 130 118 22 100 85 74 126 115 24 100 85 74 126 115 D AB angles shown are viewed from the front face of the connector. A receptacle is shown at right. The angles for the plug are exactly the same, except the direction of rotation is opposite of that shown for the receptacle. EMI/EMP A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The AB angle for a given connector is the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. B NORMAL A D AB C ROTATION LETTERS 10 JT REF RELATIVE POSSIBLE POSITION OF ROTATED MASTER KEYWAY (front face of receptacle shown) Rotations G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 37 FJT - MIL-DTL-38999, Series II Wall Mounting Receptacle - Aluminum PART NUMBER BUILDER Page G23-25 Commercial MILITARY MS27334 ALUMINUM 21-24X0 21-32X0 21-37X0 P* Z MAX. 21-24X0 (MS27334) 21-32X0 (MS27334) N * S Filter R .322 +.000 -.005 V THREAD +.006 .380 -.000 EMI/EMP S 1.066 MAX. R P* Z MAX. T 4 HOLES .005 M N 21-37X0 (MS27334) *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 .322 +.000 -.005 22 0.020 20 0.030 +.006 .380 -.000 16 0.040 12 0.081 V THREAD 1.542 MAX. Standard contact termination is Solder Cup Please consult Amphenol Aerospace for additional lengths Plug movement required to clear FJT receptacles: .281 min. * Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF/MF Filters R (TP) S +.011 -.010 T Dia. .005 V Thread UNEF-2A (Plated) Size 20 Contact Z Max. Size 16 or 16 & 20 Contacts Z Max. Size 22 Contact Size 20 Contact Z Max. Size 16 or 16 & 20 Contacts Z Max. .022 .594 .812 .120 .4375-28 .937 .952 .902 1.300 1.496 .590 .027 .719 .938 .120 .5625-24 .937 .952 .902 1.300 1.496 12 .750 .027 .812 1.031 .120 .6875-24 .937 .952 .902 1.300 1.496 14 .875 .027 .906 1.125 .120 .8125-20 .937 .952 .902 1.300 1.496 16 1.000 .027 .969 1.219 .120 .9375-20 .937 .952 .902 1.300 1.496 18 1.125 .027 1.062 1.312 .120 1.0625-18 .937 .952 .902 1.300 1.496 20 1.250 .054 1.156 1.438 .120 1.1875-18 .937 .952 .902 1.300 1.496 22 1.375 .054 1.250 1.562 .120 1.3125-18 .937 .952 .902 1.300 1.496 24 1.500 .054 1.375 1.688 .147 1.4375-18 .937 .952 .902 1.300 1.496 N Dia +.001 -.005 P* Max. 8 .473 10 Shell Size G 38 LONG SHELL HF Filters Z Max. All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FJTP - MIL-DTL-38999, Series II Wall Mounting Receptacle - Aluminum (Back Panel Mounting) PART NUMBER BUILDER Page G23-25 Commercial MILITARY MS27497 ALUMINUM 21-34X0 21-38X0 21-39X0 .447 W +.000 -.005 P Z MAX. 21-34X0 (MS27497) 21-39X0 (MS27497) N * V THREAD +.000 -.005 .505 +.006 -.000 R .322 1.066 MAX. R S +.000 -.005 Z MAX. T 4 HOLES .005 M *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 P W 21-38X0 (MS27497) N EMI/EMP .447 Filter S V THREAD +.000 -.005 .505 +.006 -.000 .322 1.542 MAX. Standard contact termination is Solder Cup Please consult Amphenol Aerospace for additional lengths. Plug movement required to clear FJT receptacles: .281 min. SHORT SHELL VHF/UHF/MF Filters Shell Size 8 N Dia +.001 -.005 .473 P Max. Panel Thickness .147 10 .590 .152 LONG SHELL HF Filters R (TP) .594 S +.011 -.010 .812 T Dia. .005 .120 V Thread UNEF-2A (Plated) .4375-28 W Dia. +.001 -.005 .516 Size 16 or 16 & 20 Contacts Z Max. .900 Size 20 or 22 Contact Z Max. .875 Size 16 or 16 & 20 Contacts Z Max. 1.385 .719 .938 .120 .5625-24 .633 .900 .875 1.385 Size 20 Contact Z Max. 1.285 1.285 12 .750 .152 .812 1.031 .120 .6875-24 .802 .900 .875 1.385 1.285 14 .875 .152 .906 1.125 .120 .8125-20 .927 .900 .875 1.385 1.285 16 1.000 .152 .969 1.219 .120 .9375-20 1.052 .900 .875 1.385 1.285 18 1.125 .152 1.062 1.312 .120 1.0625-18 1.177 .900 .875 1.385 1.285 20 1.250 .179 1.156 1.438 .120 1.1875-18 1.302 .900 .875 1.385 1.285 22 1.375 .179 1.250 1.562 .120 1.3125-18 1.427 .900 .875 1.385 1.285 24 1.500 .179 1.375 1.688 .147 1.4375-18 1.552 .900 .875 1.385 1.285 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 39 FJT - MIL-DTL-38999, Series II Box Mounting Receptacle - Aluminum Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-24X2 21-32X2 21-37X2 Z MAX. 21-24X2 21-32X2 SIMULAR TO MS27335 K N S * R Filter .322 +.000 -.005 +.006 .380 -.000 R EMI/EMP S T HOLES .005 1.066 MAX. Z MAX. M N K * *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 .322 +.000 -.005 +.006 .380 -.000 21-37X2 SIMULAR TO MS27335 1.542 MAX. Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. Plug movement required to clear FJT receptacles: .281 min. SHORT SHELL VHF/UHF/MF Filters G 40 Shell Size 8 K Dia. +.000 -.007 .438 N Dia +.001 -.005 .473 10 .562 12 .688 LONG SHELL HF Filters Size 16 or 16 & 20 Contacts Z Max. 1.496 R (TP) .594 S +.011 -.010 .812 T Dia. .005 .120 Size 20 Contact Z Max. Size 16 or 16 & 20 Contacts Z Max. Size 22 Contact .937 .952 .902 1.300 .590 .719 .938 .120 .937 .952 .902 1.300 1.496 .750 .812 1.031 .120 .937 .952 .902 1.300 1.496 Z Max. Size 20 Contact Z Max. 14 .812 .875 .906 1.125 .120 .937 .952 .902 1.300 1.496 16 .938 1.000 .969 1.219 .120 .937 .952 .902 1.300 1.496 18 1.062 1.125 1.062 1.312 .120 .937 .952 .902 1.300 1.496 20 1.188 1.250 1.156 1.438 .120 .937 .952 .902 1.300 1.496 22 1.312 1.375 1.250 1.562 .120 .937 .952 .902 1.300 1.496 24 1.438 1.500 1.375 1.688 .147 .937 .952 .902 1.300 1.496 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FJTP - MIL-DTL-38999, Series II Box Mounting Receptacle - Aluminum (Back Panel Mounting) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-34X2 21-39X2 21-38X2 +.000 .447 -.005 P Z MAX. W N 21-34X2 21-39X2 SIMULAR TO MS27508 K S * Filter R .322 +.000 -.005 .505 R S +.006 -.000 P Z MAX. T 4 HOLES .005 M *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 W N K * +.000 -.005 +.006 .505 -.000 21-38X2 SIMULAR TO MS27508 EMI/EMP +.000 .447 -.005 1.066 MAX. .322 1.542 MAX. Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. Plug movement required to clear FJT receptacles: .281 min. SHORT SHELL VHF/UHF/MF Filters Shell Size 8 K Dia. +.000 -.007 .438 N Dia +.001 -.005 .473 P Max. Panel Thickness .147 10 .562 .590 12 .688 14 LONG SHELL HF Filters R (TP) .594 S +.011 -.010 .812 T Dia. .005 .120 W Dia. +.001 -.005 .516 Size 16 or 16 & 20 Contacts Z Max. .900 Size 20 or 22 Contact Z Max. .875 Size 16 or 16 & 20 Contacts Z Max. 1.385 .152 .719 .938 .120 .633 .900 .875 1.385 1.285 .750 .152 .812 1.031 .120 .802 .900 .875 1.385 1.285 .812 .875 .152 .906 1.125 .120 .927 .900 .875 1.385 1.285 16 .938 1.000 .152 .969 1.219 .120 1.052 .900 .875 1.385 1.285 18 1.062 1.125 .152 1.062 1.312 .120 1.177 .900 .875 1.385 1.285 20 1.188 1.250 .179 1.156 1.438 .120 1.302 .900 .875 1.385 1.285 22 1.312 1.375 .179 1.250 1.562 .120 1.427 .900 .875 1.385 1.285 24 1.438 1.500 .179 1.375 1.688 .147 1.552 .900 .875 1.385 1.285 Size 20 Contact Z Max. 1.285 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 41 FJT - MIL-DTL-38999, Series II Jam Nut Receptacle - Aluminum Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-24X7 21-32X7 21-37X7 PANEL THICKNESS .062-.109 3 LOCKWIRE HOLES .059 DIA. MIN. V THREAD S 2 PLACES N Filter R THREAD Z M 1.066 MAX. A* EMI/EMP 21-24X7 21-32X7 SIMULAR TO MS27337 * H HEX 3 LOCKWIRE HOLES .059 DIA. MIN. PANEL THICKNESS .062-.109 T* C 21-37X7 SIMULAR TO MS27337 N *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 * V THREAD R THREAD M 1.632 MAX. Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. "D" shaped mounting hole dimensions. Plug movement required to clear FJT receptacles: .281 min. SHORT SHELL VHF/UHF/MF Filters A* Flat Shell +.000 Size -.010 G 42 8 C H N Dia. Hex Dia +.011 +.017 M +.001 -.010 -.016 .005 -.005 .830 1.375 1.062 .438 .473 10 .955 1.500 1.188 .438 .590 1.0000-20UNEF 1.375 1.007 .5625-24 .900 .884 .849 1.443 1.276 12 1.084 1.625 1.312 .438 .750 1.1250-18UNEF 1.500 1.134 .6875-24 .900 .884 .849 1.443 1.276 14 1.208 1.750 1.438 .438 .875 1.2500-18UNEF 1.625 1.259 .8125-20 .900 .884 .849 1.443 1.276 16 1.333 1.938 1.562 .438 1.000 1.3750-18UNEF 1.781 1.384 .9375-20 .900 .884 .849 1.443 1.276 18 1.459 2.016 1.688 .438 1.125 1.5000-18UNEF 1.890 1.507 1.0625-18 .900 .884 .849 1.443 1.276 20 1.576 2.141 1.812 .464 1.250 1.6250-18UNEF 2.016 1.634 1.1875-18 .874 .858 .823 1.443 1.276 22 1.701 2.265 2.000 .464 1.375 1.7500-18UNS 2.140 1.759 1.3125-18 .874 .858 .823 1.417 1.250 24 1.826 2.390 2.125 .464 1.500 1.8750-16UN 2.265 1.884 1.4375-18 .874 .858 .823 1.417 1.250 R Thread (Plated) Class -2A .8750-20UNEF S .010 1.250 T* Dia. +.010 -.000 .884 V Size 16 or Thread 16 & 20 UNEF-2A Contacts (Plated) Z Max. .4375-28 .900 LONG SHELL HF Filters Size 20 Contact Size 22 Contact .884 .849 Size 16 or 16 & 20 Contacts Z Max. 1.443 Z Max. Z Max. Size 20 Contact Z Max. 1.276 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FJTP - MIL-DTL-38999, Series II Jam Nut Receptacle - Aluminum (Minimum Penetration) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-24X4 21-32X4 21-37X7 1.361 MAX. 3 LOCKWIRE HOLES .044 DIA. MIN. PANEL THICKNESS .062 -.603 N S 2 PLACES * Filter 21-24X4 21-32X4 H HEX R THREAD 1.735 MAX. 3 LOCKWIRE HOLES .044 DIA. MIN. EMI/EMP A* Z MIN. M PANEL THICKNESS .062 -1.000 T* N C * *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 21-37X4 R THREAD Z MIN. M1 Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths "D" shaped mounting hole. dimensions Plug movement required to clear FJT receptacles: .281 min. SHORT SHELL VHF/UHF/MF Filters A* Flat Shell +.000 Size -.010 8 C H Dia. Hex +.011 +.017 M M1 -.010 -.016 .005 .005 .542 1.062 .750 1.220 1.594 10 .669 1.188 .875 1.220 1.594 N Dia +.001 -.005 .473 R Thread UNEF-2A (Plated) .5625-24 S +.011 -.010 .938 .590 .6875-24 1.062 T* Dia. +.010 -.000 LONG SHELL HF Filters .572 Size 16 or 16 & 20 Contacts Z Max. .000 .697 .000 .022 .057 .000 .000 Size 20 Contact Size 22 Contact Z Max. Size 16 or 16 & 20 Contacts Z Max. .022 .057 .000 .000 Z Max. Size 20 Contact Z Max. 12 .830 1.375 1.062 1.220 1.594 .750 .8750-20 1.250 .844 .000 .022 .057 .000 .000 14 .955 1.500 1.188 1.220 1.594 .875 1.0000-20 1.375 1.007 .000 .022 .057 .000 .000 16 1.084 1.625 1.312 1.220 1.594 1.000 1.1250-18 1.500 1.134 .000 .022 .057 .000 .000 18 1.208 1.750 1.438 1.220 1.594 1.125 1.2500-18 1.625 1.259 .000 .022 .057 .000 .000 20 1.333 1.938 1.562 1.188 1.563 1.250 1.3750-18 1.812 1.384 .000 .022 .057 .000 .000 22 1.459 2.062 1.688 1.188 1.563 1.375 1.5000-18 1.938 1.507 .000 .022 .057 .000 .000 24 1.575 2.188 1.812 1.188 1.563 1.500 1.6250-18 2.062 1.634 .000 .022 .057 .000 .000 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 43 FLJT - MIL-DTL-38999, Series I Features, Alternate Rotations FLJT Filter The Amphenol(R) FLJT Series offers all the design features of the FJT plus a 100% "scoop-proof" contact protection design. * Intermountable with MIL-DTL-38999/27599 Series I connectors (see Catalog 38999, Series I LJT section) * Contact Protection - shell design prevents contact damage * Quick Positive Coupling - 3 point bayonet locking * Higher reliability and greater durability with permanently encapsulated contacts * Environmental Resistant * Aluminum shells with several finish options * Error-proof alternate positioning of shell keyways * Corrosion Resistant - 500 hour salt spray olive drab cadmium over nickel plating, class T (aluminum), electroless nickel plating, class F (aluminum) or stainless steel shells EMI/EMP FLJT MASTER KEY/KEYWAY ROTATION Shell Size AB Angle of Rotation (Degrees) Normal A B C D 9 95 77 - - 113 11 95 81 67 123 109 13 95 75 63 127 115 15 95 74 61 129 116 17 95 77 65 125 113 19 95 77 65 125 113 21 95 77 65 125 113 23 95 80 69 121 110 25 95 80 69 121 110 A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The AB angle for a given connector is the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. B AB NORMAL A D C ROTATION LETTERS AB angles shown are viewed from the front face of the connector. A receptacle is shown at right. The angles for the plug are exactly the same, except the direction of rotation is opposite of that shown for the receptacle. Rotations 5 LJT REF RELATIVE POSSIBLE POSITION OF ROTATED MASTER KEYWAY (front face of receptacle shown) G 44 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FLJT - MIL-DTL-38999, Series I Wall Mounting Receptacle - Aluminum Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-29X0 21-40X0 21-36X0 Z MAX. 21-29X0 21-40X0 N * S V THREAD M .717 +.005 -.000 S Filter R 1.403 MAX. R T 4 HOLES N .005 M * Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 V THREAD M *Note 1. Standard Printed Circuit Termination diameter 21-36X0 EMI/EMP Z MAX. .717 +.005 -.000 1.403 MAX. Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. Plug movement required to clear FLJT receptacles: .625 min. SHORT SHELL VHF/UHF/MF Filters Shell Size 9 M +.000 -.006 .632 N Dia. +.001 -.005 .572 11 .632 13 .632 R (TP) .719 S +.011 -.010 .938 T Dia. .005 .128 V Thread UNEF-2A (Plated) .4375-28 .700 .812 1.031 .128 .850 .906 1.125 .128 LONG SHELL HF Filters Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact Size 20 Contact Z Max. Size 16 or 16 & 20 Contacts Z Max. .865 .950 .820 1.324 1.394 .5625-24 .865 .950 .820 1.324 1.394 .6875-24 .865 .950 .820 1.324 1.394 Z Max. Z Max. Z Max. 15 .632 .975 .969 1.219 .128 .8125-20 .865 .950 .820 1.324 1.394 17 .632 1.100 1.062 1.312 .128 .9375-20 .865 .950 .820 1.324 1.394 19 .632 1.207 1.156 1.438 .128 1.0625-18 .865 .950 .820 1.324 1.394 21 .602 1.332 1.250 1.562 .128 1.1875-18 .865 .950 .820 1.324 1.394 23 .602 1.457 1.375 1.688 .147 1.3125-18 .865 .950 .820 1.324 1.394 25 .602 1.582 1.500 1.812 .147 1.4375-18 .865 .950 .820 1.324 1.394 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 45 FLJTPQ - MIL-DTL-38999, Series I Wall Mounting Receptacle - Aluminum (Back Panel Mounting, UTS Crimp) PART NUMBER BUILDER Page G23-25 Commercial ALUMINUM 21-47X0 21-48X0 P* Z MAX. 21-47X0 N S Filter R M V THREAD .905 +.005 -.000 1.403 MAX. R P* EMI/EMP S .100 MAX. 21-48X0 T 4 HOLES N D .005 M .921 +.005 -.000 1.021 UTS (Crimp) Contact SAE AS39029/57 V 1 THREAD +.006 -.000 1.921 MAX. Plug movement required to clear FLJT receptacles: .625 min. * Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF Filters Shell Size 9 D Dia. .005 .299 M +.000 -.006 .820 N Dia. +.001 -.005 .572 P Max. Panel Thickness .234 11 .427 .820 .700 13 .541 .820 15 .666 17 19 R (TP) .719 S +.011 -.010 .938 T Dia. .005 .128 V Thread UNEF-2A (Plated) .4375-28 V1 Thread UNEF-2A (Plated) .5625-24 .234 .812 1.031 .128 .5625-24 .850 .234 .906 1.125 .128 .820 .975 .234 .969 1.219 .791 .820 1.100 .234 1.062 .897 .820 1.207 .234 1.156 Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact .672 .763 .632 .6875-24 .672 .763 .632 .6875-24 .8125-20 .672 .763 .632 .128 .8125-20 .9375-20 .672 .763 .632 1.312 .128 .9375-20 1.0625-18 .672 .763 .632 1.438 .128 1.0625-18 1.1875-18 .672 .763 .632 Z Max. Z Max. Z Max. 21 1.022 .790 1.332 .204 1.250 1.562 .128 1.1875-18 1.3125-18 .672 .763 .632 23 1.147 .790 1.457 .204 1.375 1.688 .147 1.3125-18 1.4375-18 .672 .763 .632 25 1.272 .790 1.582 .193 1.500 1.812 .147 1.4375-18 1.5625-18 .672 .763 .632 G All dimensions for reference only. 46 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FLJT - MIL-DTL-38999, Series I Box Mounting Receptacle - Aluminum Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-29X2 21-40X2 21-36X2 Z MAX. 21-29X2 21-40X2 K N S * R Filter M .717 +.005 -.000 S 1.403 MAX. R T 4 HOLES .005 M N K 21-36X2 * M *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 EMI/EMP Z MAX. .717 +.005 -.000 1.931 MAX. Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. Plug movement required to clear FLJT receptacles: .625 min. SHORT SHELL VHF/UHF/MF Filters Shell Size 9 K Dia. +.001 -.006 .436 M +.000 -.006 .632 N Dia. +.001 -.005 .572 11 .560 .632 13 .686 .632 15 .810 17 .936 LONG SHELL HF Filters R (TP) .719 S +.011 -.010 .938 T Dia. .005 .128 Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact Size 20 Contact Size 16 or 16 & 20 Contacts Z .865 .950 .820 1.324 1.394 .700 .812 1.031 .128 .865 .950 .820 1.324 1.394 .850 .906 1.125 .128 .865 .950 .820 1.324 1.394 .632 .975 .969 1.219 .128 .865 .950 .820 1.324 1.394 .632 1.100 1.062 1.312 .128 .865 .950 .820 1.324 1.394 Z Max. Z Max. Z Max. Z Max. Max. 19 1.060 .632 1.207 1.156 1.438 .128 .865 .950 .820 1.324 1.394 21 1.186 .602 1.332 1.250 1.562 .128 .865 .950 .820 1.324 1.394 23 1.310 .602 1.457 1.375 1.688 .147 .865 .950 .820 1.324 1.394 25 1.436 .602 1.582 1.500 1.812 .147 .865 .950 .820 1.324 1.394 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 47 FLJTP - MIL-DTL-38999, Series I Box Mount Receptacle - Aluminum (Back Panel Mounting, UTS Crimp) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-47X2 21-48X2 P* Z MAX. N 21-47X2 K S Filter R M .905 +.005 -.000 1.403 MAX. R EMI/EMP S .100 MAX. P* T 4 HOLES 21-48X2 .005 M N .921 +.005 -.000 1.021 +.006 -.000 D K1 UTS (Crimp) Contact SAE AS39029 1.921 MAX. Plug movement required to clear FLJT receptacles: .625 min. * Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF Filters G 48 R (TP) .719 S +.011 -.010 .938 T Dia. .005 .128 Size 20 Contact .672 Size 16 or 16 & 20 Contacts Z Max. .763 .234 .812 1.031 .128 .672 .763 .632 .850 .234 .906 1.125 .128 .672 .763 .632 .820 .975 .234 .969 1.219 .128 .672 .763 .632 1.061 .820 1.100 .234 1.062 1.312 .128 .672 .763 .632 1.062 1.187 .820 1.207 .234 1.156 1.438 .128 .672 .763 .632 1.022 1.188 1.312 .790 1.332 .204 1.250 1.562 .128 .672 .763 .632 1.147 1.312 1.437 .790 1.457 .204 1.375 1.688 .147 .672 .763 .632 1.272 1.438 1.562 .790 1.582 .193 1.500 1.812 .147 .672 .763 .632 Shell Size 9 D Dia. .005 .299 K Dia. +.000 -.006 .437 K1 Dia. +.000 -.007 .561 M +.000 -.006 .820 N Dia. +.001 -.005 .572 P Max. Panel Thickness .234 11 .427 .562 .687 .820 .700 13 .541 .688 .811 .820 15 .666 .812 .937 17 .791 .938 19 .897 21 23 25 Z Max. Size 22 Contact Z Max. .632 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FLJT - MIL-DTL-38999, Series I Box Mounting Receptacle - Aluminum (Printed Circuit Board Mount) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-57X2 T 4 HOLES G M .005 M +.006 .905 -.000 S * N W 21-57X2 (4) CORROSION RESISTANT STEEL HELICAL COIL WITH LOCKING THREADS .112-40 UNC-3B INSERTS .005 M S EMI/EMP R SEE NOTE 1 Filter R 45 .154 .020 *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Please consult Amphenol Aerospace for additional lengths. Plug movement required to clear FLJT receptacles: .625 min. Shell Size 11 G +.006 -.005 .689 M +.000 -.005 .820 N Dia. +.001 -.005 .700 13 .689 .820 15 .689 .820 17 .689 19 .689 21 R (TP) .812 S +.011 -.010 1.031 T Dia. +.004 -.003 .128 .850 .906 1.125 .128 .994 .975 .969 1.219 .128 1.119 .820 1.100 1.062 1.312 .128 1.237 .820 1.207 1.156 1.438 .128 1.379 .689 .790 1.332 1.250 1.562 .128 1.489 23 .719 .790 1.457 1.375 1.688 .147 1.619 25 .719 .790 1.582 1.500 1.812 .147 1.744 W .850 All dimensions for reference only. G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 49 FLJT - MIL-DTL-38999, Series I Jam Nut Receptacle - Aluminum Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-29X7 21-40X7 21-36X7 .915 .005 PANEL THICKNESS .062 -.125 .044 DIA. MIN. 3 LOCKWIRE HOLES S 2 PLACES Z MAX N Filter H HEX 21-29X7 21-40X7 * R THREAD V THREAD 1.403 MAX. EMI/EMP A* .915 .005 PANEL THICKNESS .062 -.125 .044 DIA. MIN. 3 LOCKWIRE HOLES Z MAX. T* C N *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 * R THREAD 21-36X7 V THREAD 1.931 MAX. Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. "D" shaped mounting hole dimensions. Plug movement required to clear FLJT receptacles: .625 min. SHORT SHELL VHF/UHF/MF Filters A* Flat Shell +.000 Size -.010 G 50 9 C H Dia. Hex +.011 +.017 -.010 -.016 .669 1.188 .875 N Dia +.001 -.005 .572 R Thread (Plated) Class -2A .6875-24UNEF S +.016 -.015 1.062 11 .769 1.375 1.000 .700 .8125-20UNEF 13 .955 1.500 1.188 .850 1.0000-20UNEF T* Dia. +.010 -.000 .697 V Thread UNEF-2A (Plated) .4375-28 .667 Size 16 or 16 & 20 Contacts Z Max. .756 1.250 .822 .5625-24 .667 1.375 1.007 .6875-24 .667 Size 20 Contact Z Max. Size 22 Contact Z Max. LONG SHELL HF Filters Size 20 Contact Z Max. Size 16 or 16 & 20 Contacts Z Max. 1.201 .616 1.228 .756 .616 1.228 1.201 .756 .616 1.228 1.201 15 1.084 1.625 1.312 .975 1.1250-18UNEF 1.500 1.134 .8125-20 .667 .756 .616 1.228 1.201 17 1.208 1.750 1.438 1.100 1.2500-18UNEF 1.625 1.259 .9375-20 .667 .756 .616 1.228 1.201 19 1.333 1.938 1.562 1.207 1.3750-18UNEF 1.812 1.384 1.0625-18 .667 .756 .616 1.228 1.201 21 1.459 2.062 1.688 1.332 1.5000-18UNEF 1.938 1.507 1.1875-18 .667 .756 .616 1.228 1.201 23 1.580 2.188 1.812 1.457 1.6250-18UNEF 2.062 1.634 1.3125-18 .667 .756 .616 1.228 1.201 25 1.709 2.312 2.000 1.582 1.7500-18UNS 2.188 1.759 1.4375-18 .667 .756 .616 1.228 1.201 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FLJTPQ - MIL-DTL-38999, Series I Jam Nut Receptacle - Aluminum (UTS Crimp) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-48X7 S 2 PLACES H HEX PANEL THICKNESS .062 -.125 .100 MAX. D N .921 T* EMI/EMP R THREAD V THREAD +.005 -.000 G C Filter A* 21-48X7 UTS (Crimp) Contact SAE AS39029/57 1.922 MAX. "D" shaped mounting hole dimensions Plug movement required to clear FLJT receptacles: .625 min. .669 C Dia. +.011 -.010 1.188 .697 V Thread UNEF-2A (Plated) .5625-24 11 .769 1.375 .427 1.030 1.000 .700 .8125-20UNEF 1.250 .822 .6875-24 13 .955 1.500 .541 1.030 1.188 .850 1.0000-20UNEF 1.375 1.007 .8125-20 15 1.084 1.625 .666 1.030 1.312 .975 1.1250-18UNEF 1.500 1.134 .9375-20 17 1.208 1.750 .791 1.030 1.438 1.100 1.2500-18UNEF 1.625 1.259 1.0625-18 19 1.333 1.938 .897 1.061 1.562 1.207 1.3750-18UNEF 1.812 1.384 1.1875-18 21 1.459 2.062 1.022 1.061 1.688 1.332 1.5000-18UNEF 1.938 1.507 1.3125-18 23 1.580 2.188 1.147 1.061 1.812 1.457 1.6250-18UNEF 2.062 1.634 1.4375-18 25 1.709 2.312 1.272 1.061 2.000 1.582 1.7500-18UNS 2.188 1.759 1.5625-18 Shell Size 9 A* Flat +.000 -.010 D Dia. .005 .299 G +.006 -.005 1.030 H Hex +.017 -.016 .875 N Dia +.001 -.005 .572 R Thread (Plated) Class -2A .6875-24UNEF S +.016 -.015 1.062 T* Dia. +.010 -.000 All dimensions for reference only. G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 51 FLJT - MIL-DTL-38999, Series I Jam Mounting Receptacle - Aluminum (Printed Circuit Board Mount) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-57X4 21-57X7 1.183 .005 .932 .326 .002 .110 S +.000 -.010 SEE NOTE 1 21-57X4 B 2 PLACES Filter N 45 * EMI/EMP RR THREAD (4) CORROSION RESISTANT STEEL HELICAL COIL WITH LOCKING THREADS .112-40 UNC-3B INSERTS .005 SPANNER NUT .125 .005 M .836 .005 W .075 MAX. BULKHEAD .326 .002 .673 .002 .110 S .575 .010 *Note 1. Standard Printed Circuit Termination diameter * Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 RR THREAD 12 0.081 SPANNER NUT B 2 PLACES N .125 .005 21-57X7 SEE NOTE 1 .075 MAX. BULKHEAD Please consult Amphenol Aerospace for additional lengths. Plug movement required to clear FLJT receptacles: .625 min. Shell Size 11 B Dia. .005 1.062 N Dia. +.001 -.005 .700 S .020 .132 13 1.250 .850 15 1.375 .975 17 1.500 19 W .850 RR Thread UNEF-2A .8125-20 .132 .994 1.0000-20 .132 1.119 1.1250-20 1.100 .132 1.237 1.2500-18 1.625 1.207 .132 1.379 1.3750-18 21 1.750 1.332 .132 1.489 1.5000-18 23 1.875 1.457 .132 1.619 1.6250-18 25 2.000 1.582 .132 1.744 1.7500-18 All dimensions for reference only. G 52 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FLJT - MIL-DTL-38999, Series I Jam Nut Receptacle - Aluminum (Minimum Penetration) Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-29X4 M PANEL THICKNESS .062 to .603 Sizes 9-19 .062 to 572 Sizes 21-25 S 2 PLACES H HEX .044 DIA. MIN. 3 LOCKWIRE HOLES Z MIN. * Filter N A* 21-29X4 R THREAD EMI/EMP T* 1.686 MAX. C *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. "D" shaped mounting hole dimensions. Plug movement required to clear FLJT receptacles: .625 min. SHORT SHELL VHF/UHF Filters A* Flat +.000 -.010 .669 C Dia. +.011 -.010 1.188 H Hex +.017 -.016 .875 T* Dia. +.010 -.000 Size 16 Contact .697 .000 Size 16 or 16 & 20 Contacts Z Max. .000 11 .769 1.375 1.250 .822 .000 13 .955 1.0000-20UNEF 1.375 1.007 15 .975 1.1250-18UNEF 1.500 1.557 1.100 1.2500-18UNEF 1.562 1.557 1.207 2.062 1.688 1.525 1.580 2.188 1.812 1.709 2.312 2.000 M .005 1.557 N Dia +.001 -.005 .572 R Thread (Plated) Class -2A .6875-24UNEF S +.016 -.015 1.062 1.000 1.557 .700 .8125-20UNEF 1.500 1.188 1.557 .850 1.084 1.625 1.312 1.557 17 1.208 1.750 1.438 19 1.333 1.938 21 1.459 23 25 Shell Size 9 Size 20 Contact Size 22 Contact .000 .000 .000 .000 .000 .000 .000 .000 .000 1.134 .000 .000 .000 .000 1.625 1.259 .000 .000 .000 .000 1.3750-18UNEF 1.812 1.384 .000 .000 .000 .000 1.332 1.5000-18UNEF 1.938 1.507 .000 .000 .000 .000 1.525 1.457 1.6250-18UNEF 2.062 1.634 .000 .000 .000 .000 1.525 1.582 1.7500-18UNS 2.188 1.759 .000 .000 .000 .000 Z Max. Z Max. Z Max. All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 53 FSJT - MIL-DTL-38999 Type Circular Filter Connectors - Features, Alternate Rotations The Amphenol(R) FSJT Series combines the unique design features of the scoop-proof FLJT Series with the standard mounting dimensions of JT types. * 100% scoop-proof design * Standard mounting dimensions * Compliance with European Specifications PAN6433-2, LN29729, VG96912 * Uses proven filter technology with available components from other series * EMP protection versions available Filter FSJT FSJT Master Key/Keyway Rotation EMI/EMP Shell Size AB Angle of Rotation (Degrees) Normal A B C 8 95 - - - D - 10 95 81 67 123 109 12 14 16 95 75 63 127 115 95 95 74 77 61 65 129 125 116 113 18 95 77 65 125 113 20 95 77 65 125 113 22 95 80 69 121 110 24 95 80 69 121 110 A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The AB angle for a given connector is the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/ keyway. AB angles shown are viewed from the front face of the connector. A receptacle is shown at right. The angles for the plug are exactly the same, except the direction of rotation is opposite of that shown for the receptacle. B AB NORMAL A D C ROTATION LETTERS Rotations 5 REF RELATIVE POSSIBLE POSITION OF ROTATED MASTER KEYWAY (front face of receptacle shown) G 54 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FSJT - MIL-DTL-38999 Type Wall Mounting Receptacle - Aluminum Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-63X0 T DIA. 4 HOLES .005 M V THREAD S Filter Z 21-63X0 N R * .717 +.006 -.000 S 1.506 MAX. EMI/EMP .312 MIN. FULL THREAD M R *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. Plug movement required to clear FSJT receptacles: .625 min. Shell Size M +.000 -.005 N Dia. +.001 -.005 10 12 14 16 18 20 22 24 .632 .632 .632 .632 .632 .602 .602 .602 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 Z Max. R (TP) S +.021 -.020 T Dia. +.004 -.003 V Thread UNEF-2A .719 .812 .906 .969 1.062 1.156 1.250 1.375 .938 1.031 1.125 1.219 1.312 1.438 1.562 1.688 .120 .120 .120 .120 .120 .120 .120 .147 .5625-24 .6875-24 .8125-20 .9375-20 1.0625-18 1.1875-18 1.3125-18 1.4375-18 Size 20 Size 16 or 16 & Size 22 Contact 20 Contacts Contact .165 .165 .165 .165 .165 .165 .165 .165 .265 .265 .265 .265 .265 .265 .265 .265 .134 .134 .134 .134 .134 .134 .134 .134 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 55 FSJT - MIL-DTL-38999 Type Wall Mounting Receptacle (UTS crimp)- Aluminum Commercial PART NUMBER BUILDER Page G23-25 T DIA. 4 HOLES ALUMINUM 21-65X0 21-63X2 BELOW .100 MAX. S R N 21-65X0 Filter D .312 MIN. FULL THREAD M R UTS (Crimp) Contact SAE AS39029/57 EMI/EMP V THREAD .005 M .717 +.006 -.000 S 1.922 MAX. *Note 1. Standard Printed Circuit Termination diameter Plug movement required to clear FSJT receptacles: .625 min. Shell Size D Dia. .005 M +.000 -.005 N Dia. +.001 -.005 10 12 14 16 18 20 22 24 .427 .541 .666 .791 .897 1.022 1.147 1.272 .632 .632 .632 .632 .632 .602 .602 .602 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 R (TP) .719 .812 .906 .969 1.062 1.156 1.250 1.375 S +.021 -.020 T Dia. +.004 -.003 V Thread UNEF-2A .938 1.031 1.125 1.219 1.312 1.438 1.562 1.688 .120 .120 .120 .120 .120 .120 .120 .147 .6875-24 .8125-20 .9375-20 1.0625-18 1.1875-18 1.3125-18 1.4375-18 1.5625-18 Contact size (AWG) .002 22 20 16 12 0.020 0.030 0.040 0.081 Standard contact termination is Solder Cup Please consult. Amphenol Aerospace for additional lengths. T DIA. 4 HOLES FSJT - MIL-DTL-38999 Type .005 M Z Box Mounting Receptacle - Aluminum 21-63X2 S EE N R * M R .717 +.006 -.000 S Plug movement required to clear FSJT receptacles: .625 min. 1.506 MAX Z Max. G Shell Size M +.000 -.005 N Dia. +.001 -.005 10 12 14 16 18 20 22 24 .632 .632 .632 .632 .632 .602 .602 .602 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 R (TP) .719 .812 .906 .969 1.062 1.156 1.250 1.375 S +.021 -.020 T Dia. +.004 -.003 EE +.001 -.005 Size 16 Contact Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact .938 1.031 1.125 1.219 1.312 1.438 1.562 1.688 .120 .120 .120 .120 .120 .120 .120 .147 .562 .687 .812 .937 1.062 1.187 1.312 1.437 .265 .265 .265 .265 .265 .265 .265 .265 .165 .165 .165 .165 .165 .165 .165 .165 .265 .265 .265 .265 .265 .265 .265 .265 .134 .134 .134 .134 .134 .134 .134 .134 All dimensions for reference only. 56 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FSJT - MIL-DTL-38999 Box Mounting Receptacle (UTS crimp) - Aluminum Commercial PART NUMBER BUILDER Page G23-25 T DIA. 4 HOLES ALUMINUM 21-65X2 21-63X7 BELOW .005 M R S N 21-65X2 D EE M R UTS (Crimp) Contact SAE AS39029/57 .717 +.006 -.000 S 1.922 MAX. N Dia. +.001 -.005 10 12 14 16 18 20 22 24 .427 .541 .666 .791 .897 1.022 1.147 1.272 .632 .632 .632 .632 .632 .602 .602 .602 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 R (TP) S +.021 -.020 T Dia. +.004 -.003 EE Dia. +.001 -.005 .719 .812 .906 .969 1.062 1.156 1.250 1.375 .938 1.031 1.125 1.219 1.312 1.438 1.562 1.688 .120 .120 .120 .120 .120 .120 .120 .147 .687 .811 .937 1.061 1.187 1.312 1.437 1.562 Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 EMI/EMP Shell Size M +.000 -.005 Filter *Note 1. Standard Printed Circuit Termination diameter Plug movement required to clear FSJT receptacles: .625 min. D Dia. .005 .100 MAX. "D" shaped mounting hole dimensions Plug movement required to clear FSJT receptacles: .625 min. P FSJT MIL-DTL-38999 T* RR THREAD V THREAD Jam Nut Receptacle - Aluminum GG BB * 21-63X7 .915 +.006 -.005 S 2 PLACES Shell Size N Dia. +.001 -.005 P Hex S .016 T* +.010 -.000 V Thread UNEF Class 2A Z .020 BB* +.000 -.010 Z K 1.506 MAX. Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. K +.006 -.005 * N GG Max. RR Thread UNEF Class 2A SS +.001 -.016 10 1.024 .590 .875 1.062 .697 .5625-24 .150 .669 1.203 .6875-24 .680 12 1.024 .750 1.062 1.250 .884 .6875-24 .150 .830 1.391 .8750-20 .859 14 1.024 .875 1.188 1.375 1.007 .8125-20 .150 .955 1.515 1.0000-20 .984 16 1.024 1.000 1.312 1.500 1.134 .9375-20 .150 1.084 1.641 1.1250-18 1.108 18 1.055 1.125 1.438 1.625 1.259 1.0625-18 .150 1.208 1.766 1.2500-18 1.233 20 1.055 1.250 1.562 1.812 1.384 1.1875-18 .150 1.333 1.953 1.3750-18 1.358 22 1.055 1.375 1.688 1.938 1.507 1.3125-18 .150 1.459 2.078 1.5000-18 1.483 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 57 FBL MIL-DTL-38999, Series IV Circular Filter Connectors Features, Alernate Rotations Components designed to meet the severe mechanical and environmental requirements of MIL-DTL-38999 Series III are now available to Series IV users. Modifications of the connector are available with EMP protection, incorporating MOV's, diodes or a combination of both. * Intermateable with MIL-DTL-38999 Series IV plugs * Maintains all the features of standard MIL-DTL-38999 Series IV receptacles * Scoop-proof pins provide contact protection * Uses insert patterns from MIL-DTL-38999 Series III Filter FBL EMI/EMP FBL MASTER KEY/KEYWAY ROTATION Main Key Receptacle/Basic Receptacle Key Position Shell Size PP QQ RR SS Socket Contact T1 Pin Contact T2 11 4428' 1516' 20854' 31532' .075 .109 13 4425' 15031' 20929' 31535' .076 .112 15 4433' 15024' 20936' 31527' .096 .132 17 4436' 15022' 20938' 31524' .096 .134 19 4433' 15027' 20933' 31527' .117 .154 21 4434' 15023' 20937' 31526' .118 .155 23 4434' 15020' 20940' 31526' .138 .176 25 4442' 15022' 20948' 31518' .139 .177 POLARITY DIMENSIONS Key and Keyway Arrangement XX YY N 110 250 A 100 260 B 90 270 C 80 280 D 70 290 K 120 255 Rotations T1 or T2 PP SS XX QQ YY RR RELATIVE POSSIBLE POSITION OF KEYWAYS (front face of receptacle shown) G 58 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FBL - MIL-DTL-38999, Series IV Box and Wall Mounting Receptacle Commercial PART NUMBER BUILDER Page G23-25 21-61X2 21-61X0 1.425 MAX. M K Z VV S R EE R Filter BOX MOUNT 21-61X2XX-XXX * T DIA. 4 HOLES S .005 M EMI/EMP 1.425 MAX. M K Z VV WALL MOUNT 21-61X0XX-XXX *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 * V THREAD Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. Shell Size K .010 M .020 R (TP) S +.021 -.020 T Dia. +.004 -.003 V Thread (Plated) -.006 EE Dia. +.001 -.005 Z Max. VV .003 Size 16 Contact Size 20 Contact Size 16 or 16 & 20 Contacts Size 22 Contact 11 .092 .791 .812 1.029 .128 M15X1-6g0.100R .589 .672 .265 .165 .265 .134 13 .092 .791 .906 1.124 .128 M18X1-6g0.100R .707 .672 .265 .165 .265 .134 15 .092 .791 .969 1.218 .128 M22X1-6g0.100R .865 .672 .265 .165 .265 .134 17 .092 .791 1.062 1.313 .128 M25X1-6g0.100R .983 .672 .265 .165 .265 .134 19 .092 .791 1.156 1.439 .128 M28X1-6g0.100R 1.101 .662 .265 .165 .265 .134 21 .124 .791 1.250 1.561 .128 M31X1-6g0.100R 1.219 .662 .265 .165 .265 .134 23 .124 .791 1.375 1.687 .147 M34X1-6g0.100R 1.337 .662 .265 .165 .265 .134 25 .124 .791 1.500 1.813 .147 M37X1-6g0.100R 1.455 .662 .265 .165 .265 .134 All dimensions for reference only. Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 59 FBL - MIL-DTL-38999 Series IV Box and Wall Mounting Receptacle (UTS Crimp) Commercial PART NUMBER BUILDER Page G23-25 21-64X2 21-64X0 M M VV VV Filter S S 1.950 MAX. 1.950 MAX. K K .100 MAX. .100 MAX. R R EE EE D D GROMMET GROMMET EMI/EMP R R S S T DIA. 4 HOLES T DIA. 4 HOLES .005 M .005 M M M VV VV *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 BOX MOUNT 21-64X2XX-XXX UTS (Crimp) Contact MIL-C-39029/57 1.950 MAX. 1.950 MAX. K K .100 MAX. .100 MAX. D D WALL MOUNT 21-64X0XX-XXX UTS (Crimp) Contact MIL-C-39029/57 EE EE GROMMET GROMMET V THREAD V THREAD Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. G 60 R (TP) S +.021 -.020 T Dia. +.004 -.003 V Thread (Plated) -.006 EE Dia. +.001 -.005 VV .003 .791 .812 1.029 .128 M18X1-6g0.100R .687 .672 .791 .906 1.124 .128 M22X1-6g0.100R .811 .672 .092 .791 .969 1.218 .128 M25X1-6g0.100R .937 .672 .791 .092 ,791 1.062 1.313 .128 M28X1-6g0.100R 1.061 .672 19 .897 .092 .791 1.156 1.439 .128 M31X1-6g0.100R 1.187 .662 21 1.022 .124 .791 1.250 1.561 .128 M34X1-6g0.100R 1.312 .662 23 1.147 .124 .791 1.375 1.687 .147 M37X1-6g0.100R 1.437 .662 25 1.272 .124 .791 1.500 1.813 .147 M41X1-6g0.100R 1.562 .662 Shell Size D Dia. .005 K .010 M .020 11 .427 .092 13 .541 .092 15 .666 17 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FPT - MIL-DTL-26482 Series Circular Filter Connectors Features, Alternate Rotations The Amphenol(R) FPT Series combines the unique design features of the miniature PT Series with an EMI filter. * Intermateable with MIL-DTL-26482 Series connectors; see Matrix 26482, Series 2 at www.amphenol-aerospace.com or Catalog MIL-DTL-26482, Series 1. * Quick positive coupling with visual confirmation of mating * Higher reliability and greater durability with permanently encapsulated contacts * Aluminum shells with several finish options FPT Filter FPT Alternate Positions Degrees 151 180 270 10-6 90 - - - 10-98 90 180 240 270 12-3 - - 180 - 12-8 90 112 203 292 12-10 60 155 270 295 12-98 61 135 189 340 14-12 434 90 - - 14-18 15 90 180 270 14-19 30 165 315 - 331 275 338 18-32 85 138 222 265 20-41 45 126 225 - 22-41 39 - - - 22-55 30 142 226 314 24-61 90 180 270 324 B 180 - Master Keyway A 152 60 B 54 A 16-8 16-26 Master Keyway Master Keyway Master Keyway B Z 45 POSITION W A Y 10-5 B X A W EMI/EMP Insert Arrangements POSITION X POSITION Y POSITION Z Views looking into front face of pin insert or rear of socket insert. Rotations G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 61 FPT - MIL-DTL-26482 Wall Mounting Receptacle Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-20X0 21-31X0 21-33X0 P* Z MAX. 21-20X0XX-XXX 21-31X0XX-XXX N Filter S * R V THREAD M J EMI/EMP S L MAX. R P* Z MAX. T DIA. 4 HOLES .005 M N *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 20 16 12 0.020 0.030 0.040 0.081 21-33X0XX-XXX * V THREAD M J L1 MAX. Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. Plug movement required to clear FPT receptacles: .438 min. * Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF/MF Filters J +.021 -.010 M +.010 -.000 N Dia +.001 -.005 P* Max. 8 .493 .431 .473 10 .493 .431 .590 Shell Size G R (TP) S +.011 -.010 T Dia. .005 V Thread UNEF-2A (Plated) L Max. .087 .594 .812 .120 .4375-28 .087 .719 .938 .120 .5625-24 LONG SHELL HF Filters Size 20 Contact Size 16 or 16 & 20 Contacts Z Max. L Max. 1.103 .850 .904 1.588 1.258 1.328 1.103 .850 .904 1.588 1.258 1.328 Z Max. 1 Size 20 Contact Z Max. Size 16 or 16 & 20 Contacts Z Max. 12 .493 .431 .750 .087 .812 1.031 .120 .6875-24 1.103 .850 .904 1.588 1.258 1.328 14 .493 .431 .875 .087 .906 1.125 .120 .8125-20 1.103 .850 .904 1.588 1.258 1.328 16 .493 .431 1.000 .087 .969 1.219 .120 .9375-20 1.103 .850 .904 1.588 1.258 1.328 18 .493 .431 1.125 .087 1.062 1.312 .120 1.0625-18 1.103 .850 .904 1.588 1.258 1.328 20 .650 .556 1.250 .212 1.156 1.438 .120 1.1875-18 1.166 .755 .809 1.651 1.163 1.233 22 .650 .556 1.375 .212 1.250 1.562 .120 1.3125-18 1.166 .755 .809 1.651 1.163 1.233 24 .683 .589 1.500 .212 1.375 1.688 .147 1.4375-18 1.166 .722 .776 1.651 1.130 1.200 All dimensions for reference only. 62 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FPT - MIL-DTL-26482 Box Mounting Receptacle PART NUMBER BUILDER Page G23-25 Commercial ALUMINUM 21-20X2 21-31X2 21-33X2 P* Z MAX. N K * S 21-20X2XX-XXX 21-31X2XX-XXX M J S Filter R L MAX. R P* EMI/EMP Z MAX. T DIA. 4 HOLES .005 M N K * *Note 1. Standard Printed Circuit Termination diameter M Contact size (AWG) .002 22 20 16 12 0.020 0.030 0.040 0.081 21-33X2XX-XXX J L1 MAX. Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. Plug movement required to clear FPT receptacles: .438 min. Acceptable panel thickness for back panel mounting a standard receptacle. SHORT SHELL VHF/UHF/MF Filters J +.021 -.010 K Dia. +.011 -.000 M +.010 -.000 N Dia +.001 -.005 P* Max. 8 .493 .438 .431 .473 10 .493 .562 .431 12 .493 .688 .431 Shell Size LONG SHELL HF Filters Size 20 Contact Z Max. Size 16 or 16 & 20 Contacts Z Max. 1.588 1.258 1.328 .904 1.588 1.258 1.328 .904 1.588 1.258 1.328 Size 20 Contact Size 16 or 16 & 20 Contacts Z Max. L1 Max. 1.103 .850 .904 .120 1.103 .850 .120 1.103 .850 R (TP) S +.011 -.010 T Dia. .005 L Max. .087 .594 .812 .120 .590 .087 .719 .938 .750 .087 .812 1.031 Z Max. 14 .493 .812 .431 .875 .087 .906 1.125 .120 1.103 .850 .904 1.588 1.258 1.328 16 .493 .938 .431 1.000 .087 .969 1.219 .120 1.103 .850 .904 1.588 1.258 1.328 18 .493 1.062 .431 1.125 .087 1.062 1.312 .120 1.103 .850 .904 1.588 1.258 1.328 20 .650 1.188 .556 1.250 .212 1.156 1.438 .120 1.166 .755 .809 1.651 1.163 1.233 All dimensions for reference only. G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 63 FPT Jam Nut Receptacle PART NUMBER BUILDER Page G23-25 Commercial ALUMINUM 21-20X7 21-31X7 21-33X7 PANEL THICKNESS .062 -.125 3 LOCKWIRE HOLES PANEL THICKNESS Z MAX. .059 DIA. MIN. .062 -.125 3 LOCKWIRE HOLES Z MAX. .059 DIA. MIN. Filter S 2 PLACES H HEX K N S 2 PLACES H HEX 21-20X7XX-XXX * 21-31X7XX-XXX K N * Y THREAD Y THREAD A* M J M L J A* EMI/EMP L PANEL THICKNESS .062 -.125 3 LOCKWIRE HOLES PANEL THICKNESS Z MAX. .059 DIA. MIN. .062 -.125 3 LOCKWIRE HOLES Z MAX. .059 DIA. MIN. T* C T* K N C * *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 20 16 12 0.020 0.030 0.040 0.081 21-33X7XX-XXX * K N Y THREAD Y THREAD M J M L1 MAX. J L1 MAX. Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. "D" shaped mounting hole dimensions. Plug movement required to clear FPT receptacles: .438 min. SHORT SHELL VHF/UHF/MF Filters .542 C Dia. +.011 -.010 1.062 H Hex +.017 -.016 .750 J +.006 -.005 .821 K Dia. +.011 -.000 .438 10 .669 1.188 .875 .821 12 .830 1.375 1.062 .821 Shell Size 8 A* Flat +.000 -.010 .572 Y Thread UNEF-2A L (Plated) Max. .5625-24 1.103 1.062 .697 .6875-24 1.103 .642 .698 1.588 1.050 1.120 1.250 .884 .8750-20 1.103 .642 .698 1.588 1.050 1.120 M .005 .696 N Dia +.001 -.005 .473 S .010 .938 .562 .696 .590 .688 .696 .750 T* Dia. +.010 -.000 LONG SHELL HF Filters .642 Size 16 or 16 & 20 Contacts Z Max. .698 L Max. 1.588 Size 20 Contact Z Max. 1 Size 20 Contact Z Max. 1.050 Size 16 or 16 & 20 Contacts Z Max. 1.120 14 .955 1.500 1.188 .821 .812 .696 .875 1.375 1.009 1.0000-20 1.103 .642 .698 1.588 1.050 1.120 16 1.084 1.625 1.312 .821 .938 .696 1.000 1.500 1.134 1.1250-18 1.103 .642 .698 1.588 1.050 1.120 1.120 18 1.208 1.750 1.438 .821 1.062 .696 1.125 1.625 1.259 1.2500-18 1.103 .642 .698 1.588 1.050 20 1.333 1.938 1.562 1.040 1.188 .884 1.250 1.812 1.384 1.3750-18 1.166 .516 .570 1.651 .924 .994 22 1.459 2.062 1.688 1.040 1.312 .884 1.375 1.938 1.509 1.5000-18 1.166 .516 .570 1.651 .924 .994 24 1.575 2.188 1.812 1.073 1.438 .917 1.500 2.062 1.634 1.6250-18 1.166 .483 .537 1.651 .891 .961 G All dimensions for reference only. 64 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FPT Jam Nut Receptacle (Minimum Penetration) PART NUMBER BUILDER Page G23-25 Commercial ALUMINUM 21-20X4 21-31X4 21-33X4 L MAX. 3 LOCKWIRE HOLES .059 DIA. MIN. PANEL THICKNESS .062 -.572 S 2 PLACES 21-20X4XX-XXX 21-31X4XX-XXX N H HEX Filter * Z MIN. Y THREAD A* M PANEL THICKNESS .062 -1.188 T* C *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 N 21-33X4XX-XXX EMI/EMP L1 MAX 3 LOCKWIRE HOLES .059 DIA. MIN. * Y THREAD Z MIN. M1 Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. "D" shaped mounting hole dimensions. Plug movement required to clear FPT receptacles: .438 min. SHORT SHELL VHF/UHF/MF Filters A* Flat +.000 -.010 C Dia. +.011 -.010 H Hex +.017 -.016 M +.016 -.015 M1 +.016 -.015 N Dia +.001 -.005 S +.011 -.010 T* Dia. +.010 -.000 Y Thread UNEF-2A (Plated) 8 .542 1.062 .750 1.235 1.690 .473 .938 .572 10 .669 1.188 .875 1.235 1.690 .590 1.062 .697 Shell Size LONG SHELL HF Filters Size 16 or 16 & 20 Contacts Z Max. L Max. Size 20 Contact Z Max. Size 16 or 16 & 20 Contacts Z Max. L1 Max. .5625-24 1.366 .022 .029 1.821 .070 .000 .6875-24 1.366 .022 .029 1.821 .070 .000 Size 20 Contact Z Max. 12 .830 1.375 1.062 1.235 1.690 .750 1.250 .884 .8750-20 1.366 .022 .029 1.821 .070 .000 14 .955 1.500 1.188 1.235 1.690 .875 1.375 1.009 1.0000-20 1.366 .022 .029 1.821 .070 .000 16 1.084 1.625 1.312 1.235 1.690 1.000 1.500 1.134 1.1250-18 1.366 .022 .029 1.821 .070 .000 18 1.208 1.750 1.438 1.235 1.690 1.125 1.625 1.259 1.2500-18 1.366 .022 .029 1.821 .070 .000 20 1.333 1.938 1.562 1.266 1.721 1.250 1.812 1.384 1.3750-18 1.428 .062 .029 1.883 .070 .000 22 1.459 2.062 1.688 1.266 1.721 1.375 1.938 1.509 1.5000-18 1.428 .062 .029 1.883 .070 .000 24 1.575 2.188 1.812 1.266 1.721 1.500 2.062 1.634 1.6250-18 1.428 .062 .029 1.883 .070 .000 All dimensions for reference only. G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 65 FPTE Wall Mounting Receptacle Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-22X0 S P* Z MAX. EMI/EMP Filter R S R N * T DIA. 4 HOLES .005 M J M L MAX. 21-22X0XX-XXX *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 Standard contact termination is Solder Cup Please consult Amphenol Aerospace for additional lengths Plug movement required to clear FPT receptacles: .438 min. * Acceptable panel thickness for back panel mounting a standard receptacle. Shell Size SHORT SHELL VHF/UHF/MF Filters J +.021 -.010 M +.010 -.000 N Dia +.001 -.005 P* Max. R (TP) S +.011 -.010 T Dia. .005 L Max. Size 20 Contact Z Max. 8 .493 .431 .473 .087 .594 .812 .120 1.409 .774 10 .493 .431 .590 .087 .719 .938 .120 1.409 .774 12 .493 .431 .750 .087 .812 1.031 .120 1.409 .774 14 .493 .431 .875 .087 .906 1.125 .120 1.409 .774 16 .493 .431 1.000 .087 .969 1.219 .120 1.409 .774 18 .493 .431 1.125 .087 1.062 1.312 .120 1.409 .774 20 .650 .556 1.250 .212 1.156 1.438 .120 1.553 .679 22 .650 .556 1.375 .212 1.250 1.562 .120 1.553 .679 24 .683 .589 1.500 .212 1.375 1.688 .147 1.553 .646 G All dimensions for reference only. 66 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FPTE Jam Nut Receptacle Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-22X7 S 2 PLACES P H HEX 3 LOCKWIRE HOLES .059 DIA. MIN. Z MAX. N Filter A* * R THREAD T* M C J 21-22X7XX-XXX *Note 1. Standard Printed Circuit Termination diameter Contact size (AWG) .002 22 0.020 20 0.030 16 0.040 12 0.081 EMI/EMP L MAX. Standard contact termination is Solder Cup Please consult Amphenol Aerospace for additional lengths All dimensions for reference only. "D" shaped mounting hole dimensions. Plug movement required to clear FPT receptacles: .438 min. P Panel Thickness A* Flat +.000 -.010 C Dia. +.011 -.010 H Hex +.017 -.016 J +.006 -.005 8 .542 1.062 .750 10 .669 1.188 12 .830 14 SHORT SHELL VHF/UHF Filters M .005 N Dia. +.001 -.005 Max. Min. R Thread UNEF-2A (Plated) .821 .696 .473 .125 .062 .875 .821 .696 .590 .125 .062 1.375 1.062 .821 .696 .750 .125 .955 1.500 1.188 .821 .696 .875 16 1.084 1.625 1.312 .821 .696 18 1.208 1.750 1.438 .821 20 1.333 1.938 1.562 22 1.459 2.062 24 1.575 2.188 Shell Size S .010 T* Dia. +.010 -.000 L Max. Size 20 Contact Z Max. .5625-24 .938 .572 1.546 .566 .6875-24 1.062 .697 1.546 .566 .062 .8750-20 1.250 .884 1.546 .566 .125 .062 1.0000-20 1.375 1.009 1.546 .566 1.000 .125 .062 1.1250-18 1.500 1.134 1.546 .566 .696 1.125 .125 .062 1.2500-18 1.625 1.259 1.546 .566 1.040 .884 1.250 .250 .062 1.3750-18 1.812 1.384 1.672 .440 1.688 1.040 .884 1.375 .250 .062 1.5000-18 1.938 1.509 1.672 .440 1.812 1.073 .917 1.500 .250 .062 1.6250-18 2.062 1.634 1.672 .407 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com G 67 Amphenol FAN Series Filtered "AN" - Features, Alternate Rotations The "AN" Filter Connector is designed in configurations intermateable and intermountable with MIL-DTL-5015* connectors and provides electromagnetic interference protection for critical circuits. * Same dimensions as the non-filtered standard MIL-Spec connectors with the exception of back shell length. (See Catalog MIL-DTL-5015). * Uses non-removable solder cup terminated contacts. * Shells are impact extruded or machined bar stock aluminum and are available in several conductive platings. * Applications include power transmission, medical communications, and ground support equipment. FAN The following insert arrangements within the 5015 family have the same alternate insert rotations for W, X, Y and Z, which are: Degrees EMI/EMP Master Keyway B POSITION W POSITION X A 32-13 32-22 32-AF 36-1 36-7 36-8 36-13 40-AR 40-AS 40-AT 40-AU Master Keyway B 28-16 28-17 28-19 28-20 28-21 32-1 32-3 32-4 32-6 32-9 32-10 32-12 Master Keyway A 24-17 24-20 24-21 24-28 28-1 28-4 28-8 28-9 28-10 28-11 28-14 28-15 Master Keyway B 22-29 22-33 22-34 24-1 24-3 24-4 24-5 24-6 24-7 24-12 24-14 24-16 Z 280 A 68 20-22 22-6 22-12 22-14 22-15 22-16 22-17 22-18 22-19 22-21 22-24 22-25 Y 250 B G 16-7 18-5 18-9 18-13 18-14 20-7 20-8 20-9 20-12 20-14 20-16 20-20 X 110 A Filter W 80 POSITION Y POSITION Z Views looking into front face of pin insert or rear of socket insert. Rotations The following are additional 5015 insert arrangements with alternate rotations. Insert Arrangement W 10SL-4 12S-3 14S-2 14S-5 14S-7 14S-9 16-9 16-10 16-11 16-13 16S-1 16S-4 16S-5 16S-6 16S-8 18-1 18-3 18-4 18-8 18-10 18-11 18-12 18-15 18-20 18-22 18-29 20-3 20-4 20-5 20-6 63 70 - - 90 70 35 90 35 35 80 35 70 90 - 70 35 35 70 - - 80 - 90 70 90 70 45 35 70 Degrees X Y - 145 120 110 180 145 110 180 110 110 - 110 145 180 170 145 110 110 - 120 170 - 120 180 145 180 145 110 110 145 - 215 240 - 270 215 250 270 250 250 - 250 215 270 265 215 250 250 - 240 265 - 240 270 215 270 215 250 250 215 * MIL-DTL-5015 supersedes MIL-C-5015. Z - 290 - - - 290 325 - 325 325 280 325 290 - - 290 325 325 290 - - 280 - - 290 - 290 - 325 290 Insert Arrangement 20-15 20-17 20-18 20-19 20-21 20-23 20-24 20-27 20-29 22-1 22-2 22-4 22-5 22-8 22-9 22-10 22-11 22-13 22-20 22-22 22-23 22-27 22-28 22-63 24-2 24-9 24-10 24-11 24-22 24-27 28-2 28-3 28-5 28-6 Degrees W X Y Z 80 90 35 90 35 35 35 35 80 35 70 35 35 35 70 35 35 35 35 - 35 80 80 20 80 35 80 35 45 80 35 70 35 70 - 180 110 180 110 110 110 110 - 110 145 110 110 110 145 110 110 110 110 110 - - - - - 110 - 110 110 - 110 145 110 145 - 270 250 270 250 250 250 250 - 250 215 250 250 250 215 250 250 250 250 250 250 250 - - - 250 - 250 250 - 250 215 250 215 280 - 325 - 325 325 325 325 280 325 290 325 325 325 290 325 325 325 325 - - 280 280 - 280 325 280 325 - 280 325 290 325 290 Insert Arrangement 28-7 28-12 28-18 28-22 28-AY 32-2 32-5 32-7 32-8 32-15 32-17 32-25 32-48 32-64 32-68 32-82 36-3 36-4 36-5 36-6 36-9 36-10 36-14 36-15 36-AF 40-1 40-5 40-9 40-10 40-35 40-AD 40-AG 40-AP 40-AV Degrees W X Y Z 35 90 70 70 45 70 35 80 80 35 45 60 80 80 30 30 70 70 - 35 80 80 90 60 65 65 33 65 65 70 45 37 35 90 110 180 145 145 110 145 110 125 125 110 110 120 - 100 - - 145 145 120 110 125 125 180 125 - 130 - 125 125 130 - 74 110 180 250 270 215 215 250 215 250 235 235 250 250 - - 110 - - 215 215 240 250 235 235 270 245 - 235 - 225 225 230 - 285 250 270 325 - 290 290 - 290 325 280 280 280 - - - 250 - - 290 290 - 325 280 280 - 305 - 300 270 310 310 290 - 322 325 - Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com FAN (MIL-DTL-5015) Box Mounting Receptacle Commercial PART NUMBER BUILDER Page G23-25 ALUMINUM 21-26X2 2.000 MAX. S K R S M R N T DIA. 4 HOLES .005 .002 22 20 16 12 0.020 0.030 0.040 0.081 EMI/EMP Contact size (AWG) B THREAD M 21-26X2XX-XXX *Note 1. Standard Printed Circuit Termination diameter Filter * Standard contact termination is Solder Cup. Please consult Amphenol Aerospace for additional lengths. Shell Size B Thread Class 2A (Plated) M +.010 -.000 K +.020 -.010 N Dia. +.010 -.000 R TP S .031 T Dia. +.004 -.002 8S .5000-28 UNEF .562 .672 .375 .594 .875 .120 10S .6250-24 UNEF .562 .672 .500 .719 1.000 .120 10SL .6250-24 UNEF .562 .672 .625 .719 1.000 .120 12S .7500-20 UNEF .562 .672 .625 .812 1.094 .120 12 .7500-20 UNEF .750 .860 .625 .812 1.094 .120 14S .8750-20 UNEF .562 .672 .750 .906 1.188 .120 14 .8750-20 UNEF .750 .860 .750 .906 1.188 .120 16S 1.0000-20 UNEF .562 .672 .875 .969 1.281 .120 16 1.0000-20 UNEF .750 .860 .875 .969 1.281 .120 18 1.1250-18 UNEF .750 .891 1.000 1.062 1.375 .120 20 1.2500-18 NEF .750 .891 1.125 1.156 1.500 .120 22 1.3750-18 NEF .750 .891 1.250 1.250 1.625 .120 24 1.5000-18 NEF .812 .953 1.375 1.375 1.750 .147 28 1.7500-18 NS .812 .953 1.625 1.562 2.000 .147 32 2.0000-18 NS .875 1.031 1.875 1.750 2.250 .173 36 2.2500-16 UN .875 1.031 2.062 1.983 2.500 .173 G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 69 Amphenol Filter Adapters Circuit Protection for Existing Applications Filter adapters present an effective and economical method of introducing EMI/EMP protection to an installed system. The adapter series of filter connectors from Amphenol are available to intermate with all the popular MIL-Specs. FEATURES OF THE AMPHENOL ADAPTER INCLUDE: * * * * * Planar technology from the industry's leader in circulars Filter products MOV or diode capability for transient protection Wide range of tooled patterns Space qualified components ADAPTERS Installation of the adapter is quick and efficient, requiring no tools, fixtures or extended downtime. Simply un-mate the existing cable harness from the receptacle; attach the coupling nut to the receptacle on the unit; then mate the Filter cable harness to the receptacle side of the adapter. Several design alternatives are available that will help ensure that the adapter remains permanently attached to either the cable harness or the L FPT Shell Size C Dia. Ref. N Dia. +.001 -.005 L Max. 8 10 12 14 16 18 20 22 24 .729 .851 1.035 1.158 1.280 1.403 1.525 1.648 1.770 .473 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 1.626 1.626 1.626 1.626 1.626 1.626 1.688 1.688 1.688 FTV Shell Size C Dia. Ref. V Thread 0.1P-0.3L-TS Class 2A L Max. 9 11 13 15 17 19 21 23 25 .845 .950 1.121 1.249 1.386 1.493 1.620 1.737 1.864 .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 2.257 2.257 2.257 2.257 2.257 2.257 2.257 2.257 2.257 FJT Shell Size C Dia. +.011 -.010 N Dia. +.001 -.005 L Max. 8 10 12 14 16 18 20 22 24 .847 .969 1.143 1.255 1.388 1.510 1.633 1.756 1.878 .473 .590 .750 .875 1.000 1.125 1.250 1.375 1.500 1.397 1.397 1.397 1.397 1.397 1.397 1.397 1.397 1.397 FLJT Shell Size C Dia. Ref. N Dia. +.001 -.005 L Max. 9 11 13 15 17 19 21 23 25 .827 1.949 1.121 1.243 1.378 1.488 1.611 1.733 1.856 .572 .700 .850 .975 1.100 1.207 1.332 1.457 1.582 2.038 2.038 2.038 2.038 2.038 2.038 2.038 2.038 2.038 EMI/EMP unit receptacle. FPT Adapter 21-900075-XXX N C L FTV Adapter 21-900529-XXX C V Thread L FJT Adapter C N 21-900393-XXX L FLJT Adapter 21-900423-XXX G 70 N All dimensions for reference only. Consult Amphenol Aerospace for ordering information. C Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com Transient Protection MOV- Metal Oxide Varistor Connectors FEATURES & BENEFITS: * * * * * * * * Filter connector size package Protection for 14, 31, 38 DC voltage circuits Radiation hardened No additional circuits required Low impedance Increased reliability Nanosecond response time Elimination of costly external suppression assemblies The Amphenol (R) MOV Connector offers the versatility of a standard connector, with transient protection for sensitive circuits. Transients in electrical circuits caused by a sudden MOV the circuit and may be repeatable or random. Filter release of stored energy can originate within or outside of Regardless of frequency or origin, transient caused failures generated by load switching, lightning, electrostatic discharge (ESD) and electromagnetic pulse (EMP) can Compatible with present filter connector assembly procedures, MOVs can be combined with existing filters. Internal housing of the MOV offers weight and space savings over other protection methods available today, and eliminates costly and bulky exterior suppression EMI/EMP destroy unprotected IC components. mechanisms in appropriate situations. MOVs are presently available in contact sizes 22, 20 and 16. Transient protection can be provided in receptacle, plug or adapter configuration. These connectors are intermateable and intermountable with the following MIL-Specs: * * * * * * MIL-DTL-38999 MIL-DTL-83723 MIL-DTL-5015 MIL-DTL-26482 MIL-DTL-26500 MIL-DTL-27599 G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 71 MOV Connectors Performance Characteristics M.O.V. PERFORMANCE CHARACTERISTICS Maximum Rating (125C) Continuous Transient DC Voltage Designation Contact Size Vm Volts RMS Voltage Vm Volts Filter 1.2 8 20 F14 Ip Amps 12 14 22 1.2 250 10 22 28 1.5 300 350 20 22 1.3 250 10 31 22 1.7 300 1.7 350 1.5 250 2 300 29 25 33 40 10 1.5 17 18.5 17 16 25 10 38 66 10 10 5 35 39 45 80 10 16 2 350 10 1.5 250 5 2 300 2.5 350 38 27 16 22 45 20 32 16 1.5 250 2.5 300 3 350 Capacitance at 1 MHz IL Max. IL Max. Picofarads 25C 125C A A Min. Max. 1000 2500 5 50 800 2000 5 50 600 1600 5 50 400 1400 5 50 600 1600 200 1000 5 50 400 1200 200 850 5 50 300 1000 20 22 20 Maximum Leakage Current at Vt (dc) 10 20 22 EMI/EMP 250 300 20 F45 Vc Volts 350 20 F38 Max. Volts 1.3 16 F31 Nominal Volts 1.5 14 5.6 Min. Volts 16 20 F25 Itm Amperes Wtm Joules 22 F8 Peak Current (8/20S) Energy (10/1000S) Specifications (25C) Maximum Clamping Voltage Varistor Voltage at 1mA Vc at Test Current lp (8/20S) (DC) 42 47 58 90 10 10 5 53 59 68 100 10 10 NOTE: Continuous voltage ratings are based on 1000 hour reliability assurance tests at 125C rated ambient temperature per MIL-STD-202 method 108. Contact Amphenol Sidney for options not listed in chart. The following charts show the typical MOV response to an input pulse open circuit of 1000V and 10A peak square wave with a 5 nanosecond rise time in a 50 Ohm system. The following chart shows response time and output voltage of a typical MOV with 1000V, 5 nanosecond, 2.5A input pulse mounted in an LJT 13-35P connector. Test was performed without load. 1200 30V 8 20 6 4 2 0 -2 15 10 5 DATA Base Peak 40 80 120 160 NANOSECONDS .1767 9.65 200 A A 600 25 20 15 300 10 5 0 -5 0 OUTPUT 0 DATA Base Peak 40 80 120 160 NANOSECONDS -.094 29.086 200 V V 0 DATA Peak Input OUTPUT VOLTAGE 25 INPUT 900 INPUT CURRENT 10 OUTPUT VOLTAGE INPUT CURRENT 12A 50 100 150 200 250 300 NANOSECONDS 24V (Clamping) 2.5A G 72 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com Transient Protection Diode Connectors FEATURES & BENEFITS: * * * * * * * * * * * * Clamping voltage as low as 11.9 volts Low capacitance - suitable for high frequency applications Unipolar or bipolar - using existing proven diode technology Protection for 5.8 to 60 VDC circuits No additional circuits required Low impedance - high frequency response Increased reliability Nanosecond response time Elimination of costly external suppression assemblies Screening to applicable requirements of MIL-S-19500TX/TXV available Keeps transients outside of the box Minimizes fast transient voltage overshoot The Amphenol(R) Diode Connector offers the versatility of a standard connector, with transient protection for sensitive circuits, such as TTL Lines. MIL-DTL-5015 MIL-DTL-26482 MIL-DTL-26500 MIL-DTL-27599 MIL-DTL-38999 MIL-DTL-83723 Compatible with present filter connector assembly procedures, diodes can stand alone or can be combined in series with filters. Internal housing of the diode offers weight and space savings over other protection methods available today, and eliminates costly and bulky exterior suppression mechanisms in appropriate situations. Diodes are presently available in contact sizes 22 and 20. EMI/EMP Regardless of frequency or origin, transient caused failures generated by load switching, lightning, electrostatic discharge (ESD) and electromagnetic pulse (EMP) can destroy unprotected IC components. Filter Transients in electrical circuits caused by a sudden release of stored energy can originate within or outside of the circuit and may be repeatable or random. * * * * * * Transient protection can be provided in receptacle, plug or adapter configurations. These connectors are intermateable and intermountable with the following MIL-Specs: Amphenol can provide COTS solutions utilizing leaded & surface mounted devices. For more information contact Amphenol Aerospace at 800-678-0141. G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 73 Transient Protection ESA - Energy Shunting Assembly The Amphenol (R) Energy Shunting Assembly (ESA) is a simple, compact unit which provides lightning and electromagnetic pulse (EMP) protection of systems in which many signal lines enter sensitive electronic equipment. The efficient packaging of the ESA circumvents the concept of one protective device per line. It provides a surge arrestor which has the advantage of space saving and simplified assembly when compared to current protective devices which range from diodes to large spark gaps. The current ESA design consists of two 53-pin contact, Mil-Standard, hermetic connectors assembled back to back, and encompassing a ground plate. A sealed chamber is formed within this thru-bulkhead unit, housing 53 in-line spark gaps. Introducing a controlled atmosphere enhances fast rise breakdown. ESA ENERGY SHUNTING ASSEMBLY EMI/EMP Filter The ESA can be integrated with an EMI filter connector which can improve its performance. These two assemblies provide a method to help protect against lightning, EMP, EMI and TEMPEST effects. PERFORMANCE CHARACTERISTICS 1. DC breakdown voltage Diode 2. Maximum rated surge discharge current (8 x 20 microsecond pulse) 3. Insulation resistance 5,000 Amperes per pin 1010 ohms minimum 4. Capacitance between each electrode and the ground plane 5. Rate-of-rise breakdown voltage 230 Volts Maximum Breakdown Voltage (Volts) 600 800 1,500 2,000 6. Surge breakdown unbalance (at 100 Volts/microseconds) 7. Surge life (500 Ampere - 10 x 1,000 microsecond) Less than 2 pf Rate of Rise (Volts/microsecond) 10 1,000 10,000 1000,000 180 Volts 400 Surges 8.Hold-over voltage 100 Volts 9.Arcing voltage 40 Volts 10. Glow to arc transition point 11. Temperature range 1 Ampere -40F to 150F (233K to 339K) G 74 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com (ESD) Protected Connectors Protection from Electrostatic Discharge Amphenol has developed cylindrical and rectangular connectors which protect sensitive components from Electrostatic Discharge (ESD) without diodes, varistors, gas tubes, or "experimental" semi-conductive materials. These connectors utilize the Faraday Cage principle to shunt electrostatic discharge events to the conductive enclosure on which the connector is mounted, thus never allowing the high voltage, high current discharge event to reside on any contacts. The ESD protected connectors have the same physical envelope as their standard counterparts, and do not require special mounting or terminating techniques. All of the contacts remain fully functional, and electrical characteristics such as capacitance are not effected. PRODUCT FEATURES: ESD TESTING ON MIL-DTL-38999, SERIES III FILTER CYLINDRICAL CONNECTOR (ACTUAL PHOTO) Electrostatic Discharge (ESD) is the rapid transfer of a static electric charge from one body to another. A static electric charge consists of either a surplus or depletion of electrons on a body, which gives that body a potential or voltage relative to ground (or another body). The discharge is extremely fast (less than 1 nanosecond risetime) and the current flow may exceed 100 amps! Static electricity is normally the result of two materials transferring charges when rubbed or separated, such as shoes scuffing across a dry carpet, or sheets of untreated plastic being separated. This phenomena is commonly referred to as the triboelectric effect. The voltage developed due to the triboelectric effect depends on the materials involved, the quantity and type of contact, and relative humidity. In a dry environment a person can accumulate a charge of up to 25 KV! In a moist environment a person's potential is reduced due to the effect of moisture on the insulating properties of materials. The voltage and current observed on neutral objects within a Faraday Cage during ESD events are due to the secondary effects of ESD. These include Electromagnetic Interference (EMI), magnetic and electrical field coupling. The Faraday Cage of the Amphenol ESD Protected Connectors has been designed to minimize these effects. EMI/EMP WHAT IS ELECTROSTATIC DISCHARGE (ESD)? try to position themselves as far as possible from each other. This places the electrons on the outer surface of the enclosure, leaving the inner surface uncharged. The charge on the outer surface does not induce a charge on any neutral object inside of the Faraday Cage, and therefore does not try to transfer itself onto the internal object. Neutral objects (such as IC's) inside of a faraday cage are thereby protected from ESD activity external to the Faraday Cage. Filter * Connector envelope identical to unprotected design for most applications * Exceeds protection requirements of IEC 801-2 and MIL-STD-1686: * Ensures that all components within a conductive enclosure will be subjected to a maximum of 10V during electrostatic discharges between -26 KV and +26 KV * Voltage observed on contacts during ESD events - <10V (at 1 megohm) * Current observed on contacts during ESD events - <100 milliamperes (at 2 ohms) * Response time - instantaneous (voltage and current are maximum values) * Maximum ESD voltage - tested to 26KV * No capacitive loading * Eliminates the need for discrete components (such as diodes) and maximizes printed circuit board real estate for equipment housed in conductive enclosures which require ESD protection as free-standing units * Operating voltage of connectors not affected for most designs * Pulse life - infinite THE AMPHENOL(R) ESD PROTECTED CONNECTORS The Amphenol ESD Protected Connectors have a Faraday Cage at the mating interface. The Faraday Cage has been specifically designed to intercept electrostatic discharges from the contacts in the unmated state, while maintaining each contact's isolation when the connector is mated. When the ESD Protected Connectors have been mounted to a conductive enclosure, a Faraday Cage is created which will protect components located within the enclosure from electrostatic discharges. This eliminates the need for discrete components such as diodes and gas discharge tubes, and saves printed circuit board real estate. Amphenol ESD Protected Connectors have also been applied to Line Replaceable Modules (LRM).* WHAT IS A FARADAY CAGE? A Faraday Cage is a conductive enclosure. It may be solid in form such as a sheet-metal enclosure, or it may be full of apertures, such as a wire cloth box. When a charge is placed on a Faraday Cage, the electrons which make up the charge, having like polarity, G Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com * amphenol-aerospace.com 75