AMPHENOL CORPORATION
40-60 Delaware Avenue, Sidney, NY 13838-1395 • 800-678-0141 • www.amphenol-aerospace.com
9/2016
EMI/EMP Filter Protection Connectors
FOR MILITARY, AEROSPACE AND HARSH ENVIRONMENTS
Protection of
Sensitive Circuits
Filter
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com 1
EMI/EMP Filter Protection
G
TABLE OF CONTENTS FOR SECTION G
Filter Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
EMI Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 4
Filter Connector Options/Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
Filter Selection Data ......................................................7
Effect of Temperature on EMI Filter, Attenuation Curves...........................8
Impedance Matching Formula ..............................................9
Quality Assurance Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Insert Arrangements Chart and Illustrations ....................................11-22
Filter Connector Shell Styles:
How to Order-Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
How to Order-Special/EMI Check Sheet ......................................25
Filter MIL-DTL-38999, Series III - FTV Aluminum / FCTV Composite.................26
Filter MIL-DTL-38999, Series III - FCTV Composite Shell Styles . . . . . . . . . . . . . . . . . . . . 27-30
Filter MIL-DTL-38999, Series III - FTV Aluminum Shell Styles.......................31-36
Filter MIL-DTL-38999, Series II - FJT, FJTP Aluminum............................37-43
Filter MIL-DTL-38999, Series I - FLJT Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-53
Filter SJT Series (MIL-DTL-38999 type) - FSJT Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . 54-57
Filter MIL-DTL-38999 Series IV - FBL Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-60
Filter MIL-DTL-26482 - FPT Aluminum ........................................61-67
Filter “AN” Series, MIL-DTL-5015 - FAN Aluminum ..............................68, 69
Filter Adapters ..........................................................70
Transient Protection MOV (Metal Oxide Varistor) Connectors.......................71, 72
Transient Protection Diode Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73, 74
Transient Protection ESA (Energy Shunting Assembly) Connectors ..................75
EMI/Transient Protection Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
2Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Amphenol® EMI/EMP Protection Connectors offer the
versa tility of standard connectors with EMI/EMP protection
for sensitive circuits. Internal housing of the EMI/EMP
devices eliminates costly and bulky exterior discrete
protection devices.
Virtually all major MIL-Spec circulars can be
incorporated with filter devices:
MIL-DTL-38999 • MIL-DTL-5015
MIL-DTL-26482 • MIL-DTL-27599
MIL-DTL-83723 • MIL-DTL-26500
FJT
Subminiature JT,
MIL-DTL-38999
Series II with Filter
Protection.
FLJT
Subminiature LJT,
MIL-DTL-38999
Series I with Filter
Protection.
FBL
Intermateable with
MIL-DTL-38999 Series IV
Plugs. Maintaines the
standard of MIL-DTL-38999
Series IV Receptacles
EMI/EMP Filter Protection Connectors
For Protection of Sensitive Circuits
Filter AN
Connector
MIL-DTL-5015
Type Connectors
with Filter
Protection.
FPT
Miniature MIL-DTL-26482
Series I with Filter Protection.
Page 26 Page 44 Page 68 Page 37 Page 58
Page 61
FTV
Subminiature Tri-Start,
MIL-DTL-38999 Series
III, Metal or Composite
shells with Filter
Protection.
Rectangular Connectors available by Amphenol:
MIL-DTL-24308 D-Sub
MIL-DTL-83513 Micro D
ARINC 404/600
DOD-83527 Rack and Panel
MIL-DTL-83733 Rack and Panel
Rectangular lter interconnects are manufactured and sup plied
by Amphenol Canada (www.amphenolcanada.com).
Overview
Mil-Spec
Rectangular
High Density HD38999
Provide 30% more contacts
Work with existing mil-specied
38999 shells
Utilize mil-qualied 39029 size
23 contact
Available in Mil-Spec or lter
length shells
Available in Filter, Hermetic & Epoxy Seal
2M
Ideal where space is limited
High density interconnect
• Light weight
Intermateable & inter-mountable
with Glenair’s “Might Mouse”
Available in Filter, Hermetic & Epoxy Seal
For more information visit www.amphenol-aerospace.com. The
Micro-Miniature Catalog 12-M1 is online or contact an
Amphenol Salesperson for more information.
3
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
EMI Capabilities
For Maximum Design Flexibility
Advantages
AMPHENOL OFFERS FILTER CONNECTORS,
WHICH CAN INCLUDE:
EMP protection using diodes
EMP protection utilizing metal oxide varistors (MOV’s)
Filtered plug connectors
Glass fused hermetic seal
ESD protection
Combinations of ltering devices within one
connector package
Options
ADVANTAGES OF FILTER CONNECTORS:
Reduction in overall weight and space with the
elimina tion of external lter circuits
Reduction of solder junctions
Increase in reliability due to fewer connections
Fragile lter elements protected by connector shell from
handling and environmental damage
Pre-testing from factory and ready for installation
Amphenol provides a wide range of ltering solutions. You
can select your options for your particular interference
threats - VHF, UHF, MF1, HF or other lter ranges, then
couple with a connector package of your choice. Or give
Amphe nol your custom shell design requirements for as-
sistance in designing your unique lter solution.
EMI Filter connectors are intended for use in temperatures
from –55°C to +125°C. Attenuation will change with feed-
through current and temperature.
To assure reliability, connectors may be subjected to an
attenuation performance test verifying proper assembly
and grounding of the lters. Attenuation data on lter per-
formance is stated in reference to a 50 ohm impedance
system in order to allow lter performance to be more
eas ily translated into real world impedances. Those inter-
ested in determining the expected lter perfor mance in an
impedance system other than 50 ohms may refer to page
285 of this catalog or may contact Amphenol Aerospace
for further assistance.
IT IS SUGGESTED THAT THE USER(S) ANALYZE
THEIR SYSTEM REQUIRE MENTS FOR EMI
PROTECTION IN THE FOLLOWING AREAS:
Working voltage (DC or AC and Frequency)
Peak voltage
Desired attenuation at a given frequency level
Any special capacitance limitations
Planar Capacitor Array
Diode Contacts
PLANARS, MOV’S, AND DIODE CONTACTS
Filtering Solutions
Assembly Capacitor
and MOV Planars
Rectangular
4Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
CONTACT OPTIONS:
Coaxial, concentric twinax, triax and quadrax contacts
can be included in arrangements of ltered contacts for
signal or power circuits (Please refer to the
High Speed Contacts Section for High Frequency
Contacts for Multi-Pin Connectors).
Filter contacts with differing cut-off frequencies can be
mixed in any given insert
arrangement. (ratio 100:1 typical)
Ground, insulated or lter contacts can be combined
within the same connector to meet unique or changing
frequency protec tion requirements.
Thermocouple contacts
Diodes or MOV for EMP
EMI Capabilities
For Maximum Design Flexibility, Continued
* More in-depth information on attenuation is available in:
L-1146, General Design Guideline for EMI Filters and/or
TVS (Transient Voltage Suppression) Connectors.
Also for further information ask for:
L-1145, How to Specify Filter Connectors.
Contacts
Wire
Terminations
The Amphenol® EMI lter connector utilizes planar capacitor
technology to provide the user with the most reliable and
cost effective performance across the frequency range. (See
MOV and Diode pages 71-73).
Several array congurations are available, see page 274 for
illustrations. An encapsulant of oven-cured epoxy in the rear
provides:
Mechanical and thermal insulation of the ceramic
elements – mechanical loading can be accomplished
without capaci tor damage.
Pins can be bent 90° and straightened with no damage
to the lter.
Hermeticity (4.6x10-3 cc/sec) – prevents water from
enter ing through the rear of the connector in high
humidity envi ronments.
Amphenol recommends using metal protection caps
during cleaning operations.
PLANAR ASSEMBLY
Gasket
Shell Grounding
Ring Oven Cured
Epoxy
Potting Seal
Contact and
Planar
Assembly
Ferrite
Hard Faced
Insert
Interfacial
Seal
Pi Type Planar Array Assembly
Ferrite Inductor
Ground
Electrode
Solder Washer
or Spring
Clip
Grounding Ring
Hot
Electrode
Planar Capacitor Technology
METHODS OF WIRE TERMINATION:
Solder cup - wire termination
PCB termination (Pre-tinning is available)
Solderless wrap
Amphenol® UTS
(Universal Termination System)
allows crimp termination. It uses
crimp insertable socket contacts on
con ductor wires. Sockets mate with
lter pins within the connector body.
(Socket type M39029/57).
(For further contact informa tion,
see section, 38999 Series I & II).
Weld terminal for
thermocouple contacts
Compliant Pin (press t) for epoxy
5
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Filter Connector Options
Transient Protection
ESD High Speed
ADAPTERS:
Features and Benefits:
Effective and economical method of
introducing EMI ltering and/or transient
protection to an installed system
Intermateable with all popular
MIL-SPEC connectors
Can also be congured to provide
transient protection
utilizing diodes and MOVs
Space qualied components available
Quick and efcient installation
Readily available in MIL-DTL-38999
Series I, II, and III as well as
MIL-DTL-26482 types
For more information see page 70
FILTER PLUG:
Features and Benefits:
Utilized when access to receptacle is denied
Utilizes same components as standard
EMI/EMP receptacles
Can be assembled to electrical harness
Alternative to connector adapter when
length restrictions exist
Consult Amphenol Aerospace for availability.
DIODE:
Features and Benefits:
Versatility with transient protection for
sensitive circuits
Low capacitance diode for high
speed signals
Can be used in combination with Filters
and MOV’s
Transients up to 200 Volts either Bipolar
or Uni-polar
MIL-S-19500 Compatible
Available for Surface Mount,
or “Leaded” type devices
Nanosecond response time
For more information see pages 73
MOV:
Features and Benefits:
Filter connector size package
Protection for 14, 31, 38 DC voltage
circuits
No additional circuits required
Low impedance
Elimination of costly external
suppression assemblies
Nanosecond response time
For more information see pages 71, 72
ESA - ENERGY SHUNTING ASSEMBLY:
Features and Benefits:
Compact unit providing lightning and
EMP Protection
Eliminates per line circuit
protection devices
Single surge arrestor providing
space saving
Simplied assembly can be integrated
with an EMI lter connector
For more information see page 75
ESD:
Features and Benefits:
Utilizes The Faraday Cage Principle to shunt
ESD events through conductive enclosures
Maintains same physical envelopes as
standard counterparts
Eliminates need for discrete components
Innite pulse life
For more information see page 75
HIGH SPEED:
Filter connector can incorporate high frequency
coax, twinax, triax quadrax and differential
twinax contact:
Features and Benefits:
Eliminate discontinuities or
impedance variations
High speed data transfer
Fits various RG and special cables
6Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
EMI/Transient Protection
Specials
EPOXY SEALED CONNECTORS:
Features and Benefits:
Light weight alternative to glass sealed
hermetic connector
Leak rate of 1x10-5 cc of He/sec leak rate
maintained after temperature
cycling, 5 cycles -55 to +125°C
Available in standard and custom
congurations.
Available in virtually all major
MIL-SPEC circular connectors
Sealed Connectors
Printed Circuit Board Mount
Weight Saving
HERMETIC & HIGH SPEED HERMETIC:
Features and Benefits:
Leak rate of 1X10-7 cc of He/sec or less
Utilizes fused glass insert in a steel shell
Approximately 1/2 inch longer than
standard series
Filter and Transient protection
integration available.
Hermetically sealed High Speed Contacts available
For more information www.amphenol-aerospace.com
AQUACON:
Features and Benefits:
Underwater Use
Hermetically Sealed-Moisture/Oil
Resistant 1500 PSI capability
Leak rate of 1X10-7 cc of
He/sec or less
Utilizes fused glass insert in a
steel shell
For more information see the Aquacon catalog online at
www.amphenol-aerospace.com
SEALED RECEPTACLES WITH
CRIMP CONTACT:
Features and Benefits:
Leak rate of 1x10-5 cc of He/sec leak
rate maintained after temperature cycling,
5 cycles -55 to +125°C
Allows quick and reliable termination using
standard M39029/57 socket contacts.
Intermateable & inter-mountable with
standard 38999 Series III plugs.
For more information www.amphenol-aerospace.com
PRESS FIT CONNECTORS:
Features and Benefits:
Solderless mounting on printed circuit boards
High speed
Low cost
Elimination of soldering thermal stress
No cold soldered joints
No short circuits
No cleaning of excess ux
Optional contact for piercing conformal
board coating is available.
For more information www.amphenol-aerospace.com
PRINTED CIRCUIT BOARD MOUNT:
Features and Benefits:
Allows mounting directly to a PC board, Flex
circuit, and header connector
Available in Composite and
Aluminum shells
Improved reliability by elimination of external
spacers and washers
Stand-off shells available in different
congurations
For more information see page 29, 30, 35, 36, 49, 52
HEADER FOR FLEX PRINTED OR
PC BOARD:
Features and Benefits:
Circular and rectangular
Provides easy separation of the connector
from the PC board or ex
Cost savings in the manufacturing
process
Assemblies can be vapor phase or wave
soldered to ex/printed circuit board
Eliminates possible damage to your
expensive lter ,TVS protected connectors,
or Printed Circuit Boards
For more information www.amphenol-aerospace.com
COMPOSITE:
Features and Benefits:
Meets MIL-DTL-38999, Series III
dimensional lengths
Offers same high performance as its metal
counterpart
Lightweight: 17%-70% weight savings
over metal
Corrosion Resistant
Offers better environmental performance
than its metal counterpart
Durable- 1500 coupling minimum
See FCTV Composites on pages 27-30
7
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Amphenol® EMI Connectors are produced with several types of lters.
They are all low band pass lters with the following congurations:
Filter Selection Data
C
“C” lters involve a single capacitor. This simple,
cost efcient design excels at low frequency
performance which often exceeds the
performance of multiple-component con-
gurations.
L-C
“L-C” lters excel when the source imped-
ance is less than the load impedance, often
outperforming “PI” lters at frequencies
lower than 10MHz
21
L1
C-L
“C-L” lters are the inverse of “L-C” lters,
performing best when the source imped-
ance is greater than the load impedance
21
L1
T
“T” lters combine the advantages of both the “L-C” and
“C-L” lter types in one package, with superior high frequency
performance.
2
C1
PI
Typical of MF1, VHF and UHF designations, “PI” lters are the
workhorse of the lter industry. Combining performance with
cost efciency, this three-component lter has a steep inser-
tion loss curve, and excels at frequencies above 10MHz. “PI”
lters work well with a combination of different source and
load impedances
21
C1 C2
L1
CASCADED PI
Typical of the HF1 designation, “Cascaded PI” lters contain
three shunt capacitors and two series inductors, resulting in
a very steep insertion loss curve, outperforming all other lter
congurations at frequencies above 10MHz.
UNBALANCED PI
“Unbalanced PI” lters have all the advantages of “PI” lters,
with superior performance when the source impedance is less
than the load impedance.
22
C1 C2
L2
1
L1
22
C2 C3
C1
L2
1
L1
Consult Amphenol Aerospace for attenuation performance values
8Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Filter Characteristics
Attenuation Curve
-90
-80
-70
-60
-50
-40
-30
-20
-10
0
10
0.1 110 100 1000
Insertion Loss (db)
Frequency (MHz)
Insertion Loss, Minimum
MF1
HF1
VHF1
VHF2
UHF2
UHF1
AAO Filter Designation MF1 * HF1 VHF1 VHF2 UHF2 UHF1
Filter Type PI Casc PI PI PI PI PI
MIL-STD-2120 Designation Band G Band E Band C Band B
Min Cap (pFd) 800,000 9,800 6,000 1,900 500 300
Typical Cap (pFd) 1,000,000 16,900 9,000 2,950 800 375
Max Cap (pFd) 1,600,000 24,000 12,000 4,000 1,100 450
Working Voltage, Max (VDC) 50 200 200 200 200 200
Dielectric Withstanding Voltage (VDC) **** 100 500 500 500 500 500
Insulation Resistance, Min (G-ohms) 0.25 10 10 10 10 10
Cut-off Frequency, Min (3db, MHz) 0.004 0.26 0.52 1.6 5.6 13.6
Insertion Loss 0.3 MHz ** 29 1 0 0 0 0
Insertion Loss 1 MHz ** 46 5 3 0 0 0
Insertion Loss 3 MHz ** 73 12 9 3 0 0
Insertion Loss 10 MHz ** 80 26 19 10 2 1
Insertion Loss 30 MHz ** 80 59 40 21 8 5
Insertion Loss 100 MHz ** 80 80 62 43 22 16
Insertion Loss 300 MHz ** 80 80 72 59 38 30
Insertion Loss 1 GHz ** 64 80 68 66 56 49
Notes:
* MF1 designation is not available in size 22 and 23 contacts.
** All insertion loss values are minimum, in units of -db. Insertion loss performance will vary due to voltage, current and temperature.
Consult Amphenol Aerospace for more information.
*** Common for all lter types.
**** Higher DWV ratings are available on request. Consult Amphenol Aerospace.
General Specifications ***
Air leakage max 4.6 x 10^-3 cc/sec
Operating Temp Range -55 to +125 deg C
Max RF Current (amps) 3
Feed-Thru Current, max, sz 22 and 23 cont 5
Feed-Thru Current, max, sz 20 cont 7.5
Feed-Thru Current, max, sz 16 cont 13
9
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
0
20
60
40
80
100
120
140
Attenuation - dB
Attenuation vs Transfer Impedance in 50 Ohm System
Transfer Impedance - Z Ohms
10 10101010
10
12
1-0-1-2-3-4
ZSZL
Z12(ZS + ZL)
10(100)
1.4 x 10–2 (10 + 100)
Impedance Matching Formula
(Your System to a 50 Ohm System)
The following formula and example are offered in order to
deter mine the expected lter performance in an impedance
system other than 50 ohms.
With the attenuation expressed in 50 ohms and the transfer
impedance curve shown in Figure 1 below, a designer can
relate the expressed attenuation to the input and output
imped ance of their circuit.
Example:
(1) Noise is 40dB above specication level at 100 MHz
(2) Output and input impedance are 10 and 100 ohms
respectively
(3) Amphenol® VHF 7000 pf lter has a 65 dB minimum
attenuation at 100 MHz and +25°C
Formula (Taken from Figure 1):
1.4 x 10-2 ohm = transfer impedance
for 65 dB in a 50 ohm system
Atten (dB) = 20 log10 1 +
ZS = source impedance (output)
ZL = load impedance (input)
Z12 = transfer impedance
Atten = lter performance in a system other than 50 ohms
Atten (dB) = 20 log10 1 +
Attenuation = 56.3dB
In this case, the 7000 pf VHF lter will give 56.3 dB which is
16.3dB below the desired reduction in noise (40dB) as stated
in the above problem.
Figure 1
10 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Network Analyzer
Power Splitter
Fixture
RF
Out Ref
Signal
In Return
Test Sample
ACCEPTANCE TESTING
All lter connectors undergo extensive acceptance testing to
assure product quality. An outline of standard accep tance
testing performed is as follows:
MECHANICAL INSPECTION
Dimensional inspection of shells, keys, keyways and
mount ing surfaces by either in-process inspection of
components or inspection of nal assemblies.
Visual inspection of contacts, inserts and seals, gaskets and
surface nish of shells and hardware.
ELECTRICAL TESTS
Insulation resistance of lter contacts is checked 100% at the
working voltage and to the test limit listed for each l ter in
the lter selection data table.
Dielectric withstanding voltage is tested on 100% of lter
contacts at the voltage listed in the lter selection data table.
Capacitance is tested 100% at 1KHz.
SPECIAL TESTS/PROCESSES
In addition to the standard acceptance testing and processes,
the following additional production testing and processing can
be provided upon request:
Automated attenuation testing (through 100 MHz)
Attenuation testing available through 1G upon special
request. Contact Amphenol Aerospace in Sidney for
additional details.
Leakage inspection
Thermal cycling/shock
Burn-in
De-gassing
Consult Amphenol Aerospace for further information.
QUALIFICATIONS
Amphenol® lter connectors have been qualied and are on
periodic requalication to specication BSF-1 (available
from your Amphenol representative). This is patterned after
MIL-DTL-38999, modied to include mechanical and
environmental testing and electrical parameters important to
lter connector performance.
These acceptance tests, along with exhaustive in-process
inspection and testing, give Amphenol® lter connectors
their reputation for reliability.
ATTENUATION TEST CIRCUIT
There are multiple test stations
located on the Amphenol production
floor that support all in-process,
final electric and qualification
testing as necessary.
Quality Assurance Testing
Testing
11
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
MIL-DTL-
27599 Hermetics Contact Size
JT II LJT I TV III III JT/LJT
Solder
Crimp Class
H
Class
Y
TV* Service
Rating
Total
Contacts
23
HD
22D 22M 22 20 16 12 12
(Coax)
10
(Power)
8
(Coax)
8††
(Twinax)
7-D2 M 2 2
7-D3 M 3 3
7-D4 M 4 4
8-2nPM 2 2
8-3nX NA P P M 3 3
9-3nX
9-5Hn Grounded 1 1
8-6X X P P M 6 6
9-6X X P P
9-7nXM 7 7
9-9nA23 N 9 9
9-22nXI 2 2
8-35 X P P M 6 6
9-35 9-35 A35 X P P P
8-44 X P P M 4 4
9-44 X
9-94nuM 2 2
8-97nXM 4 2 2
8-98 S X P P I 3 3
9-98 9-98 A98 XXP P P
11-2H11-2HB2 X P** I 2 2
10-43I 4 4
11-411-4X2
10-5X X P P I 5 5
11-511-5B5XXP
11-6nSI 6 6
10-13 X X P/S P/S M 13 13
11-13 X X P/S P/S
11-19nB23 N 19 19
10-35 X P/S P/S M 13 13
11-35 11-35 B35 X P/S P/S P
11-54nXuII 4 4
10-98 X X P/S P/S I 6 6
11-98 11-98 B98 XXP/S P/S P
10-99 X P P I 7 7
11-99 11-99 B99 XX P
12-3X X uP P II 3 3
13-3nP
12-4X X P P I 4 4
13-4H13-4HC4XXP P P
12-8X X P P I 8 8
13-813-8C8XXP P P
13-13nI, Fiber
Optic 4 2** 2
12-22 X P/S P/S M 22 22
13-22 X X P/S P/S
13-26n2 M 8 6 2
13-32nC23 N 32 32
12-35 X P/S P/S M 22 22
13-35 13-35 C35 X P/S P/S P
13-63nul 4 2 2
12-98 X X P/S P/S I 10 10
13-98 13-98 C98 XXP/S P/S P
14-4n2I 4 4
15-4n15-4n2u
14-5X X P P II 5 5
15-5H15-5HD5XXP P P
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Availability and Identification Chart
Series Series Series Military
X Completely tooled.
+ Majority of tooling is completed
(contact Amphenol Aerospace for availability).
u Not tooled for 02-R.
P Available with Pin contacts only
S Available with Socket contacts only
P/S Available with Pin contacts or Socket contacts
H Ground plane proprietary option available. Arrg. 9-5 is exclusively
ground plane type.
n Not Mil-Qualied.
G 21-75 is Mil-Qualied with twinax contacts only.
Note: MS connector 21-75 is supplied with size 8 twinax.
Commercial connector 21-75 is supplied with size 8 coax.
HD designates High Density 38999 Series III insert patterns which
use size 23 contacts only. Not rated over 175°C.
* Hermetic inserts - solder termination standard. (Contact Amphenol
Aerospace for optional PCB or eyelet termination).
** Two size 16 contacts dedicated to ber optics. See the Fiber Optic
section for more information.
*** For use in MIL-STD-1760 applications.
For RG 180/U and RG 195/U cables only.
†† Size 8 Coax and Twinax are interchangeable.
(2) Not Tooled for RP or 02RE
(3) Pin inserts only, not tooled for RP or 02RE (Consult Amphenol
Aerospace for avail.)
(5) MS Connector 21-79 has provision for two size 8 coax contacts.
Coax contacts are not supplied unless specied by customer.
12 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Availability and Identification Chart
MIL-DTL-
27599 Hermetics Contact Size
JT II LJT I TV III III JT/LJT
Solder
Crimp Class
H
Class
Y
TV* Service
Rating
Total
Contacts
23
HD
22D 22M 22 20 16 12 12
(Coax)
10
(Power)
8
(Coax)
8††
(Twinax)
14-15 X X P P I 15 14 1
15-15 15-15 D15 XXP/S P/S PI 15 14 1
14-18 X X P/S P/S I 18 18
15-18 15-18 D18 XXP/S P/S P
14-19nX X I 19 19
15-19 15-19 D19 X P P P
14-35 X P P M 37 37
15-35 15-35 D35 X P/S P/S P
14-37 X X P P M 37 37
15-37 XXP P
15-55nD23 N 55 55
14-68n2P P 1 8 8
15-68nX3
14-97nX P P I 12 8 4
15-97 15-97 D97 XXP P P
17-217-2E2 X uM 39 38 1
16-6 X P P I 6 6
17-617-6E6 X P P P
16-8X X P P II 8 8
17-8H17-8HE8XXP/S P/S P
16-13n2I 13 13
17-13n2
17-22n17-22Hn uCoax 4 2 2
17-25n2M 24 22 2
16-26 X X P/S P/S I 26 26
17-26 17-26 E26 XXP/S P/S P
16-35 X P P M 55 55
17-35 17-35 E35 XXP P P
16-42 X M 42 42
17-42nP
17-52nXuM 2 2
16-55 X X P/S P/S M 55 55
17-55 XXP/S P/S
17-60nX I/Coax 10 8 2
17-73nE73 N 73 73
16-99 X X P P I 23 21 2
17-99 17-99 E99 XXP P
19-ADnXuInst. 17 16 1
18-11 X X P P II 11 11
19-11H19-11HF11 XXP P P
19-18 19-18 F18 22M 18 14 4
18-28 X X I 28 26 2
19-28n19-28 F28 X P X
18-30 X X I 30 29 1
19-30nX P
19-31nXM 15 12 1 2
18-32 X X P/S P/S I 32 32
19-32 19-32 F32 XXP/S P/S P
18-35 X P P M 66 66
19-35 19-35 F35 X P P P
18-53 X X M 53 53
19-53nP
18-66 X X P P M 66 66
19-66 X P P
19-67nX 3 S S M 67 67
18-68n2I 18 18
19-68n19-68 3S
18-96n2I 9 9
19-88nF23 N 88 88
20-1X P P M 79 79
21-1X P/S P/S
Series Series Series Military
13
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
MIL-DTL-
27599 Hermetics Contact Size
JT II LJT I TV III III JT/LJT
Solder
Crimp H Y TV* Service
Rating
Total
Contacts
23
HD
22D 22M 22 20 16 12 12
(Coax)
10
(Power)
8
(Coax)
8††
(Twinax)
20-2XM 65 65
21-2nX
20-11n3I 11 11
21-11H21-11HG11 X
20-16 X X P/S P/S II 16 16
21-16H21-16HG16 XXP P P
21-25nI 25 25
21-27nXI 27 27
21-29nXI 27 19 4 4
20-35 X P P M 79 79
21-35 21-35 G35 X P/S P/S P
20-39 X X P P I 39 37 2
21-39 21-39 G39 XXP P P
20-41 X X P P I 41 41
21-41 21-41 G41 XXP/S P/S P
21-75H21-75HG G75 2XNM4 4 (4)
21-79n21-79n2XII 19 17 2 (5)
21-121nG23 N 121 121
22-1X P/S P/S M 100 100
23-1X P P
22-2X X P P M 85 85
23-2XXP P
23-6Hn 23-6Hn P M 6 6
22-14n2uI 14 14
23-14n23-14n2u
22-21 X X P P II 21 21
23-21H23-21HH21 XXP P P
22-32 X X P P I 32 32
23-32nXP
23-34nXI 34 34
22-35 X P/S P/S M 100 100
23-35 23-35 H35 X P P P
22-53nPI 53 53
23-53 23-53 H53 XX P/S P/S P
23-54 nX M 53 40 9 4
22-55 X X P P I 55 55
23-55 23-55 H55 X P
23-97nXII 16 16
23-99nXII 11 11
23-151 nH23 N 151 151
24-1X P P M 128 128
25-1X P P
24-2XM 100 100
25-2X
24-4X P P I 56 48 8
25-425-4J4 X P
25-7n25-7J7 X MTwinax 99 97 2
25-8HJ8uTwinax 8 8
25-11*** J11 2uN 11 2 9
25-17nuM 42 36 6
24-19nX P P I 19 19
25-19H25-19HJ19 X P
25-20n25-20*** J20 2uN 30 10 13 4 3
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Availability and Identification Chart
X Completely tooled.
+ Majority of tooling is completed
(contact Amphenol Aerospace for availability).
u Not tooled for 02-R.
P Available with Pin contacts only
S Available with Socket contacts only
P/S Available with Pin contacts or Socket contacts
H Ground plane proprietary option available. Arrg. 9-5, 26-62 is exclusively
ground plane type.
n Not Mil-Qualied.
G 21-75 is Mil-Qualied with twinax contacts only.
* Hermetic inserts - solder termination standard. (Contact Amphenol
Aerospace for optional PCB or eyelet termination).
HD designates High Density 38999 Series III insert patterns which use
size 23 contacts only. Not rated over 175°C.
** Two size 16 contacts dedicated to ber optics. See the Fiber Optic
Section for more information.
*** For use in MIL-STD-1760 applications.
For RG 180/U and RG 195/U cables only.
†† Size 8 Coax and Twinax are interchangeable.
(2) Not Tooled for RP or 02RE
(3) Pin inserts only, not tooled for RP or 02RE (Consult Amphenol for avail.)
(4) MS connector 21-75 is supplied with size 8 twinax.
Commercial connector 21-75 is supplied with size 8 coax.
(5) MS Connector 21-79 has provision for two size 8 coax contacts.
Coax contacts are not supplied unless specied by customer.
Series Series Series Military
14 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
(Insert arrangements requiring non-standard shells or larger contacts)
X Completely tooled.
+ Majority of tooling is completed (contact
Amphenol Aerospace for availability).
u Not tooled for 02-R.
P Pin inserts only (contact Amphenol Aerospace
for socket availability).
H Ground plane proprietary option available.
Arrangement 9-5, 25-62 is exclusively ground
plane type.
n Not Mil-Qualied.
* Hermetic inserts - solder termination standard.
(Contact Amphenol Aerospace for optional PCB
or eyelet termination).
** Two size 16 contacts dedicated to ber optics.
See the Fiber Optic section for more information.
*** For use in MIL-STD-1760 applications .
For RG 180/U and RG 195/U cables only.
†† Size 8 Coax and Twinax are interchangeable.
Note: 25L-3 and 25L-7 require longer shells.
Select Non-Standard Shell Size
Contact Size
Shell Size-
Insert Arrg.
Crimp Hermetics* Service
Rating
Total
Con-
tacts
22D 20 8 4 0
25-16 X M 8 6 2
25L-3X II 3 1 2
25L-7X II 7 7
33-3X II 3 1 2
33-5X II 5 5
33-6X II 6 2 4
37-5X II 4 4
SELECT SHELL SIZE - SPECIAL INSERT ARRANGEMENT
(Not Mil-Spec Qualified)
MIL-DTL-
27599 Hermetics Contact Size
JT II LJT I TV III III JT/LJT
Solder Crimp H Y TV* Service
Rating
Total
Contacts
23
HD
22D 22M 22 20 16 12 12
(Coax)
10
(Power)
8
(Coax)
8††
(Twinax
8
Quadrax
24-24 X P P I 24 12 12
25-24H25-24HJ24 X P P
25-26nH FI 25 16 5 4
24-29 XI 29 29
25-29H25-29HJ29 XX
24-35 X P P New 128 128
25-35 25-35 J35 X P P PM
24-37 XI 37 37
25-37H25-37HJ37 X
24-43n3I 43 23 20
25-43 25-43 J43 X 2 u
25-46 25-46 J46 2uI 46 40 4 2
24-61 X X P P I 61 61
25-61 25-61 J61 XXP P P
25-62nH XuI 12 8 4
25-90 uI 46 40 4 2
25-187nJ23 N 187 187
25-F4nXM/I 66 49 13 4
TV Series III
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Availability and Identification Chart
HD designates High Density 38999 Series III insert patterns which use size 23 contacts only. Not rated over 175 °C
X Completely tooled.
u Not tooled for 02-R.
P Pin inserts only (contact Amphenol Aerospace for socket availability).
H Ground plane proprietary option available. Arrg. 9-5, 25-62 is exclusively ground plane type.
n Not Mil-Qualied.
Series Series Series Military
- SPECIAL INSERT ARRANGEMENT
Contact Size
Shell Size-
Insert Arrg.
Crimp Hermetics* Service
Rating
Total
Contacts
Comments 22D 20 16 12
9-2X I 2 Formerly Pyle 2
15-4X II 4 Formerly Pyle 4
15-25 X M 25 Formerly Pyle 22 3
15-AT X I 13 10 3
17-20 X M 20 Formerly Pyle 16 4
21-12 X I 12 Formerly Pyle 3 9
21-21 X M/Inst. 41 Improved sealing 32 9
21-99 X M 16 Formerly Pyle 5 11
25-92 X M 101 Formerly Pyle 92 9
25-97 X M 42 Formerly Pyle 26 3 13
15
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Front face of pin inserts illustrated
1
6
11
17
30
A
B
C
D
E
F
A
B
C
DE
F
G
H
A
D
C
B
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Arrangements
A
B
C
1
2
3
4
56
1
2
3
4
5
67
A
B
51
6
4
3
2
1
2
3
4
A
B
C
D
CA
B
AB
A
BC
D
A
B
C
D
E
F
12
3
4
5
6
7
8
9
10
11
12
13
12
3
4
5
6
7
8
9
10
11
1213
A
B
C
D
EF
A
B
C
D
E
F
G
A
B
C
A
B
C
D
A
B
C
D
E
F
G
H
22
1
20
1
21
22
AB
C
D
E
F
G
H
JK
A
B
CD
E
A
BC
D
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
A
B
C
D
E
F
G
H
J
K
L
MN
P
R
S
TU
AB
C
D
E
FG
H
J
K
L
M
NP
R
S
T
UV
1
21
31
AB
C
D
E
F
G
H
J
K
L
M
1
11
21
31
A
B
C
D
E
F
GH
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
A
B
C
D
E
Shell Size &
Insert Arrg. for:
Series II JT 8-2 8-3 8-6 8-35 8-44 8-97 8-98
Series I LJT 9-3 9-6 9-7 9-22 9-35 9-44 9-98
Series III TV 7-D2 7-D3 7-D4 9-5 9-9 HD 9-35 9-94 9-98
Service Rating M M M M M Grounded M M N I M M M M I
Number of Contacts 2 3 4 2 3 1 6 7 9 2 6 4 2 2 2 3
Contact Size 22D 22D 22D 20 20 8 Twinax 22M 22M 23 20 22D 22 20 22M 20 20
A
B
Shell Size &
Insert Arrg. for:
Series II JT 10-4 10-5 10-13 10-35 10-98 10-99 12-3
Series I LJT 11-2 11-4 11-5 11-6 11-13 11-35 11-98 11-99 13-3
Series III TV 11-2 11-4 11-5 11-19 HD 11-35 11-54 11-98 11-99
Service Rating I I I I M N M II I I II
Number of Contacts 2 4 5 6 13 19 13 4 6 7 3
Contact Size 16 20 20 20 22M 23 22D 22D 20 20 16
Shell Size &
Insert Arrg. for:
Series II JT 12-4 12-8 12-22 12-35 12-98 14-4 14-5
Series I LJT 13-4 13-8 13-22 13-35 13-98 15-4 15-5
Series III TV 13-4 13-8 13-26 13-32 HD 13-35 13-63 13-98 15-4 15-5
Service Rating I I M M N M I I I II
Number of Contacts 4 8 22 6 2 32 22 2 2 10 4 5
Contact Size 16 20 22M 22D 12 23 22D 16 12 20 12 16
Shell Size &
Insert Arrg. for:
Series II JT 14-15 14-18 14-19 14-35 14-37 14-68 14-97
Series I LJT 15-15 15-18 15-19 15-35 15-37 15-68 15-97
Series III TV 15-15 15-18 15-19 15-35 15-55 HD 15-97
Service Rating I I I M M N I I
Number of Contacts 14 1 18 19 37 37 55 8 8 4
Contact Size 20 16 20 20 22D 22M 23 16 20 16
Shell Size &
Insert Arrg. for:
Series II JT 16-6 16-8 16-13
Series I LJT 17-2 17-6 17-8 17-13 17-22 17-25
Series III TV 17-2 17-6 17-8 17-22
Service Rating M I II I Coax M
Number of Contacts 38 1 6 8 13 2 2 22 2
Contact Size 22D 8 Twinax 12 16 16 12 Coax 8 Coax 22D 8 Coax
A
B
D
C
A
B
C
D
E
F
G
H
J
K
L
NM
12
3
4
5
6
7
8
9
10
11 12 13 14
15 16
17
18
19
20
21
22
23
24
BA
A
B
C
D
82
1
9
7
3
54
6
12
3
4
5
6
7
8
9
10 17
16
19
18
15
14
13
12
11
18
29
32
1
39
16
2417 3125
3932
46
5247
40
5553
10
41
HD: High Density HD38999 (use size 23 contacts only)
A
C
D
E
FB
BA
B
C
AA
B
C
D
16 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
STU
V
W
X
Y
Z
ab
c
Front face of pin inserts illustrated
1
3
4
9
10
16
17
24
25
31
32
39
40
47
46
52
53
55
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
STU
V
W
X
Y
Z
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Arrangements
Shell Size &
Insert Arrg. for:
Series II JT 16-26 16-35 16-42 16-55
Series I LJT 17-26 17-35 17-42 17-55
Series III TV 17-26 17-35 17-52 17-60 17-73 HD
Service Rating I M M M M I/Coax N
Number of Contacts 26 55 42 2 55 8 2 73
Contact Size 20 22D 22 8 Twinax 22M 22D 8 Coax 23
Shell Size &
Insert Arrg. for:
Series II JT 16-99 18-11 18-28 18-30
Series I LJT 17-99 19-11 19-18 19-28 19-30
Series III TV 17-99 19-11 19-18 19-28
Service Rating I II M M I
Number of Contacts 21 2 11 14 4 26 2 29 1
Contact Size 20 16 16 22D 8 Twinax 20 16 20 16
Shell Size &
Insert Arrg. for:
Series II JT 18-32 18-35 18-53 18-66
Series I LJT 19-32 19-35 19-53 19-66 19-67
Series III TV 19-31 19-32 19-35
Service Rating M 1 M M M M
Number of Contacts 2 1 12 32 66 53 66 67
Contact Size 8 Coax 12 22D 20 22D 22 22M 22M
1
21
31
41
51
61
71
79
11
1
31
21
11
41
51
61
65
Shell Size &
Insert Arrg. for:
Series II JT 18-68 18-96 20-1 20-2
Series I LJT 19-68 21-1 21-2
Series III TV 19-88 HD 19-AD
Service Rating I N I Inst. M II
Number of Contacts 18 88 9 16 1 79 65
Contact Size 16 23 12 20 8 Twinax 22M 22
A
B
C
D
E
F
G
H
J
K
L
A
B
C
D
E
F
G
H
R
J
K
L
M
N
P
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
B
C
E
K
M
N
R
S
U
V
W
g
h
f
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
1
2
3
4
9
10
16
17
24
25
33
34
42
43
50
51
57
58
63
64
66
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
TU
V
W
X
Y
Z
a
b
c
d
e
gf
1
3
4
9
10
16
17
24
25
34
35
43
44
51
52
58
59
64
65
67
A
BL
CK
DJ
EH
FG R
U
M
TN
SP
A
BH
C
D
F
E
GJ
1
41
51
52
53
31
11
21
1
2
3
4
9
10
24
16
17 25
33
34
42
43
50
51
57
58
63
64
66
1
21
42
41
31
11
1
3
4
9
10
16
17
24 31
25
32
39
40
46
47
52
53
55
A
B
1
5
2
8
9 3
10
7
64
1
2
15 314
13
12
4
5
11 8
710
16
89
A
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
12
7
3
815
24
16
25
33
42
50
59
67
72 73
71
66
58
49
41
32
1
88
84
73
55
31
30
HD: High Density HD38999
(use size 23 contacts only)
17
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
24
23
25
26
27
1
11
21
31
41
51
61 71
79
Front face of pin inserts illustrated
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
UVW
XYZ
a
b
c
d
e
f
g
h
i
j
k
m
n
p
q
r
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
VW
XY
Z
a
b
c
d
e
f
g
h
i
j
k
m
n
p
q
r
s
t
A
BC
D
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
ST
UV
A
B
C
D
E
F
A
BK
CJ LP
MN
DH
EG
F
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Arrangements
Shell Size &
Insert Arrg. for:
Series II JT 20-11 20-16
Series I LJT 21-11 21-16 21-25 21-27
Series III TV 21-11 21-16 21-29
Service Rating I II I I I
Number of Contacts 11 16 25 27 19 4 4
Contact Size 12 16 20 20 20 16 12
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
A
B
C
D
E
F
G
HJ
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
Shell Size &
Insert Arrg. for:
Series II JT 20-35 20-39 20-41
Series I LJT 21-35 21-39 21-41 21-75 21-79
Series III TV 21-35 21-39 21-41 21-75 21-79
Service Rating M 1 I N II
Number of Contacts 79 37 2 41 4 17 (See Note)
Contact Size 22D 20 16 20 (See Note) 22D
1
2
3
4
5
6
7
8
15
16
24
25
34
35
45
46
55
56
66
67
76
77
85
86
93
94
95
96
97
98
99
100
1
4
5
11
12
19
20
28
29
38
39
47
48
57
58
66
67
74
75
81
82
85
HD: High Density HD38999 (use size 23 contacts only)
Note: MS connector 21-75 is supplied with four size 8 twinax contacts.
Commercial connector 21-75 is supplied with four size 8 coax contacts.
MS connector 21-79 has provision for two size 8 coax contacts.
Coax contacts are not supplied unless specied by customers.
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
A
B
C
D
E
F
G
H
J
K
L
A
B
C
D
E
F
G
H
J
K
L
M
N
PR
S
Shell Size &
Insert Arrg. for:
Series II JT 22-1 22-2 22-14
Series I LJT 23-1 23-2 23-6 23-14
Series III TV 21-121 HD 23-6
Service Rating N M M M I
Number of Contacts 121 100 85 6 14
Contact Size 23 22M 22 8 Twinax 12
15
613
23
22
14
32
33 43
44 55
56 66
67 78
79 89
90 99
100 108
109 116
117 121
18 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
A
B
C
D
E
F
G
H
J
K
L
MP
R
S
N
T
U
V
W
X
AB
C
D
E
F
G
H
J
K
L
MNPR
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
Shell Size &
Insert Arrg. for:
Series II JT 22-21 22-32 22-35
Series I LJT 23-21 23-32 23-34 23-35
Series III TV 23-21 23-35
Service Rating II I I M
Number of Contacts 21 32 34 100
Contact Size 16 20 20 22D
Front face of pin inserts illustrated
Shell Size &
Insert Arrg. for:
Series II JT 22-53 22-55
Series I LJT 23-53 23-55 23-97
Series III TV 23-53 23-54 23-55
Service Rating I M I II
Number of Contacts 53 40 9 4 55 16
Contact Size 20 22D 16 12 20 16
Shell Size &
Insert Arrg. for:
Series II JT 24-1 24-2
Series I LJT 23-99 25-1 25-2
Series III TV 23-151 HD
Service Rating II N M M
Number of Contacts 11 151 128 100
Contact Size 16 23 22M 22
AB
C
D
E
F
G
H
J
K
L
M
N
P
RST
U
VW
X
Y
Z
a
b
c
d
e
f
g
h
km
np
q
r
s
t
AB
u
v
w
x
y
zAB
CC
DD
EE
FF
GG
HH
123
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
2223 24 25
2627
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
4344
45 46
47
48
4950
51
52
53
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
TUVW
X
Y
Z
a
b
c
d
e
f
g
h
i
j
k
mn
p
q
r
s
t
v
w
x
y
z
AA BB
CC
u
DD
EE
FF
GG
HH
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
STU
V
W
X
Y
Z
a
b
c
de
f
g
h
j
k
l
1
2
34
5
6
7
8
15
16
24
25
34
35
45
46
55
56
66
67
76
77
85
86
93
94
9596
97
98
99
100
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
A
B
C
D
E
F
G
H
J
K
L
1
7
8
14
24
25
48
58
59
70
71
81
94
104
105
114
115
121
125
35
15
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Arrangements
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
1
2
3
19 40 51
73
92
99
100
14
51
1
22 21
12
32
33 44
45 57
58 69
70 82
83 94
95
130
108
140
120
147
131
107
119
141
151
148
HD: High Density HD38999
(use size 23 contacts only)
19
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
A
B
C
D
E
F
G
HJ
KL
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
bcd
e
f
g
h
k
m
n
p
qrs
t
u
v
w
AB
C
D
E
FGH
J
K
L
M
NP
R
ST
UV
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
1
2
3
4
5
6
7
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
YZ
a
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 19 20
21
22
23
24
25
Front face of pin inserts illustrated
A
B
C
D
E
F
G
H
J
K
L
M
N
P
RST
U
V
W
X
Y
Z
a
bc
d
e
f
1
4
7
8
14
15
24
25
35
36
47
48
58
59
70
71
81
82
93
94
104
105
114
115
121
125
128
Shell Size &
Insert Arrg. for:
Series II JT 24-19 24-24
Series I LJT 25-19 25-20 25-24
Series III TV 25-17 25-19 25-20*** 25-24
Service Rating M I N I
Number of Contacts 36 6 19 10 13 3 4 12 12
Contact Size 22D 8 Twinax 12 20 16 8 Twinax 12 Coax 16 12
Shell Size &
Insert Arrg. for:
Series II JT 24-29 24-35 24-37
Series I LJT 25-29 25-35 25-37
Series III TV 25-26 25-29 25-35 25-37
Service Rating I I M I
Number of Contacts 16 5 4 29 128 37
Contact Size 20 12 8 Coax 16 22D 16
(With Matched Impedance)
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
k
m
n
p
q
r
MIL-DTL-38999, Series I LJT, II JT, III TV
Insert Arrangements
*** For use in MIL-STD-1760 applications.
ABC
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Za
bc
d
e
f
g
h
k
m
n
p
q
r
t
u
vw
x
y
z
sJJ
KK
LL
AA
BBCC
DD
EE
FF
GG
HH
1
6
7
15
16
18
19
21
22
24
26
28
29
32
33
41
42
46
53
59
60
64
67
68
72
74
76
78
79
81
82
84
85
93
94
99
25 75
A
B
C
D
E
F
G
H
Shell Size &
Insert Arrg. for:
Series II JT 24-4
Series I LJT 25-4 25-7 25-11
Series III TV 25-4 25-7 25-8 25-11***
Service Rating I M Twinax N
Number of Contacts 48 8 97 2 8 2 9
Contact Size 20 16 22D 8 Twinax 8 Twinax 20 10
20 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
† Coax contacts for RG180/U or RG195/U cable.
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
k
m
n
p
q
r
s
t
u
v
w
x
y
z
AA
Shell Size &
Insert Arrg. for:
Series II JT 25-43
Series I LJT 25-43 25-46
Series III TV 25-41 25-43 25-46
Service Rating N/Inst. I I
Number of Contacts 22 3 11 2 3 23 20 40 4 2
Contact Size 22D 20 16 12 Coax 8 Twinax 20 16 20 16 8 Coax
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
XYZ
a
b
c
d
e
f
g
h
k
m
np
q
r
s
tu
v
w
x
Front face of pin inserts illustrated
Shell Size &
Insert Arrg. for:
Series II JT 24-61
Series I LJT 25-61
Series III TV 25-61 25-62 25-90
Service Rating I I I
Number of Contacts 61 8 4 40 4 2
Contact Size 20 16 8 20 16 8 Twinax
Ground Plane
Only
A
B
C
D
E
F
G
H
J
KL
M
N
a
P
R
S
T
U
V
W
X
Y
Z
b
c
d
e
fg
h
AA
k
q
m
n
p
r
s
tu
v
w
x
y
z
1
17
18
19
49
35
20
21
22
23
16
15
48
59
60 66 64
65
37 50 51 41 42 43
31
30
38 39 40 29
27
26
25
24
54636261
36
325352
44
55
56
57
46
34
14
13
45
12
11
10
9
8
7
6
5
4
3
2
33
28
47
58
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Arrangements
D A
CB
18
45
72
63
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
e
f
g
h
i
j
k
m
n
p
q
r
s
t
uv
w
x
y
z
BB
CC
DD
EE
FF
GG HH
JJ
KK
LL
MM
NN
AA
PP
BP
CN
DM
EL
F
G
H
J
K
A
RY
X S
W
Z
T
UV
de
npqg
ac
b
j
k h
m
st
r
i
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV 25-F4 25-187 HD
Service Rating Size 22D=M, Balance =I N
Number of Contacts 49 13 4 187
Contact Size 22D 16 12 23
1
411
21
20
12
32
33 45
46 59
60 72
73 86
87 101
102
142
116
155
129
167
143
115
128
177
176
185
184
187
156
168
3
HD: High Density HD38999
(use size 23 contacts only)
21
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Front face of pin inserts illustrated
MIL-DTL-38999, Series III TV
Special Insert Arrangements
NOTE: Some specials shown here were formerly known as Pyle arrangements.
Consult Amphenol for how to order information for connectors with these inserts.
For further information on special arrangements consult Amphenol Aerospace, Sidney NY.
* Pyle 15-4 does not mate with Amphenol Tri-Start 15-4 insert.
BA
D
CB
A
3
2
1
13
12
11
4
5
6
7
8
9
10
14
15
16
17
18
19
20
23
22
21
24
25
A
J
H
G
FE
D
C
B
M
L
K
S
RP
N
98
100
101
90
79
67
57
46
24
36
13
5
1
4
12 23 35 45 56 66 78 89 97
2
3
99
MA
LB
N
KC
JD
HE
GF
YW
X
aU
ZV
rm
pnks
b
c
deP
R
S
T
j
w
h
g
f
uv
t
Shell Size &
Insert Arrg. for:
Series III TV 9-2 15-4* 15-25 15-AT
Service Rating I II M M
Number of Contacts 2 4 22 3 16 4
Contact Size 20 16 22D 16 22D 12
Shell Size &
Insert Arrg. for:
Series III TV 21-99 25-92 25-97
Service Rating M M M
Number of Contacts 5 11 92 9 26 3 13
Contact Size 22D 12 22D 16 22D 16 12
A
D
C
B
16
1514
13
12
11 10
98
76
5
4
32
1
J
H
G
F
E
K
D
L
C
B
A
M
1
2
3
4
5
6
7
8
910 A
B
C
D
E
F
G
H
J
11 12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
Shell Size &
Insert Arrg. for:
Series III TV 17-20 21-12 21-21
Service Rating M I M/Inst.
Number of Contacts 16 4 3 9 32 9
Contact Size 22D 12 20 12 22D 12
A
10
7
6
5
34
BC
1
2
98
22 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Front face of pin inserts illustrated
CONTACT LEGEND
NOTE: Some specials shown here were formerly known as Pyle
arrangements. Consult Amphenol for how to order information for
connectors with these inserts.
Consult Amphenol Aerospace for longer shell drawings.
A
B
C
D
E
F
G
H
A
B
C
A
B
CD
E
F
G
B
CA
A
B
CD
E
A
B
C
D
E
F
A
B
C
D
840 22D
MIL-DTL-38999, Series III TV
Special Insert Arrangements
Shell Size &
Insert Arrg. for:
Series III TV 25-16 25L-3 25L-7
Service Rating MII II
Number of Contacts 6 2 1 2 7
Contact Size 20 4 8 4 8
Shell Size &
Insert Arrg. for:
Series III TV 33-3 33-5 33-6
Service Rating II II II
Number of Contacts 1 2 5 2 4
Contact Size 4 0 4 8 4
Shell Size &
Insert Arrg. for:
Series III TV 37-5
Service Rating II
Number of Contacts 4
Contact Size 0
Non-Standard Shells or Large Contacts
23
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Federal Vendor Identication/FSCM 77820
How to Order - Standard
Filter Connectors
1. 2. 3. 4. 5. 6. 7.
Filter Connector
Designator
Connector and
Filter Type
Shell Finish Shell Styles Shell Size
Insert Arrg.
Type of Contact and
Keyway Position
Printed Circuit Board
Tail Length
21 24 9 2 16-26 P 1
1. CONNECTOR TYPE
21 Filter Connector
36 MOV Connector
47 Diode Connector
3. SHELL FINISH
0 Chromate
1Bright cadmium
2 Stainless steel (electrolytic nickel plated)
4 Electroless nickel, MS (F)
5 Gold plate over nickel
7 Cadmium plate over nickel, MS(A)
8 Bright nickel
9 Cadmium plate, nickel base, OD, MS(B),
(500 hr. salt spray test)
DDurmalon™ Nickel-PTFE (cadmium alternative)
- 38999 Class T refer to page 5
ZBlack Zinc
4. SHELL STYLE
0 Wall mount receptacle
2 Box mount receptacle
3 Jam nut receptacle with rear thread (PT only)
4 Minimum penetration jam nut receptacle
7 Jam nut receptacle
2. CONNECTOR/FILTER TYPE
20 FPT with VHF-1 lter
22 FPTE with VHF-1 lter
24 FJT with VHF-1 lter
25 FJT with ±8 volt diode/VHF-1 lter combination
26 FAN with VHF-1 lter
29 FLJT with VHF-1 lter
31 FPT with MF-1 lter
32 FJT with MF-1 lter
33 FPT with HF-1 lter (long shell)
34 FJTP with VHF-1 lter
36 FLJT with HF-1 lter (long shell)
37 FJT with HF-1 lter (long shell-min. penetration also available)
38 FJTP with HF-1 lter (long shell)
39 FJTP with MF-1 lter
40 FLJT with MF-1 lter
41 FJT (UTS-crimp) with VHF-1 lter
46 FPT (UTS-crimp) with VHF-1 lter
47 FLJTPQ with VHF-1 lter
48 FLJTPQ (UTS-crimp) with VHF-1 lter
50 FTV (UTS-crimp) with VHF-1 lter
51 FTV (UTS-crimp) with HF-1 lter (long shell)
52 FTV with VHF-1 lter
53 FTV with HF-1 lter (long shell)
56 FJTP (UTS-crimp) with VHF-1 lter
57 FLJT with VHF-1 lter (printed circuit board mount, mod. ange)
58 FJTPQ (UTS-crimp) with VHF-1 lter
61 FBL with VHF-1 lter
63 FSJT with VHF-1 lter
64 FBL (UTS-crimp) with VHF-1 lter
65 FSJT (UTS-crimp) with VHF-1 lter
73 M83723 bayonet coupling with VHF-1 lter
76 FCTV with VHF-1 lter with composite shell
77 FTV with VHF-1 lter and standard series III shells
78 FCTV PCB mount with standard ange and VHF-1 lter
79 Same as 77 with no lter - Epoxy sealed
80 FTV PCB mount with standard ange, standard nut and VHF-1 lter
81 Same as 80 with no Filter - Epoxy sealed
82 FTV with ±8 volt diode/VHF-1 lter combination
83 FSJT with ±8 volt diode/VHF-1 lter combination
84 FTV (UTS-crimp) with ±8 volt diode only
85 Same as 76 with no lter - Epoxy sealed
87 FLJT (UTS-crimp) with ±8 volt diode/VHF-1 lter combination
96 FPT (UTS-crimp) with VHF-1 lter for 2000 Volts
5. SHELL SIZE AND INSERT ARRANGEMENT
8 through 24 Shell sizes available for FJT, Series II
9 through 25 Shell sizes available for FLJT, Series I, TV,
Series III and the FBL Series IV
Shell Size & Insert Arrangements are together in one chart.
First number represents Shell Size, second number is
the Insert Arrangement. See pages 11-22
24 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
6. TYPE OF CONTACT
P Pins in a normal rotation
SSocket in a normal rotation
How to Order - Standard
Filter Connectors
7. (OPTIONAL) THIS WILL CHANGE CONNECTOR TO
PCB TERMINATION FROM DEFAULT SOLDER CUP
Code ± .030 Pre-Tinned?
1 0.120
NO
2YES
30.185
NO
4YES
50.270
NO
6YES
Rotations
Note:
-2XX Suffix
Any combination of lters, non-lters, grounds, and non-standard
contact terminations will require -2XX sufx. Please consult
Amphenol Aerospace for assistance in setting up these part
numbers.
Standard voltage for diode is ±8 volts. Any devia tion requires a
–2XX sufx.
Standard voltage for a MOV is 47 volts. Any devi ation requires a
–2XX sufx.
Standard diode/lter combination is ±8 volt/VHF-1 lter.
Any deviation requires a –2XX sufx.
Standard MOV/lter combination is 47 volt/VHF-1 lter.
Any deviation requires a –2XX sufx.
Unable to nd what you are looking for under our “How to Order”
page 23?. Fill out our EMI Check Sheet on page 25 and send it to
Filterapps@amphenol-aao.com or call us directly at 800-678-0141
FJT, FLJT or FSJT FTV FCTV FPT FBL Series IV FAN
Alternate
Position
Suffix Letter Alternate
Position
Suffix Letter Alternate
Position
Suffix Letter Alternate
Position
Suffix Letter Alternate
Position
Suffix Letter
Pins Sockets Pins Sockets Pins Sockets Pins Sockets Pins Sockets
Normal P S Normal P S Normal P S Normal P S Normal P S
A E F A G H W G H A E F W G H
B R T B I J X I J B G H X I J
C W X C K L Y K L C J L Y K L
D Y Z D M N Z M N D R T Z M N
E R T K W X 12 C D
13 A B
ALTERNATE ROTATION SUFFIX LETTERS
25
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Date_______________________________
Ref. Filter P/N _________________________________ Ref. Mil-Spec_________________________________________
Filter Requirements:
Filter Type (Pi, C, LC, T, LL, other)_________________________________________________________________________
Capacitance (locations) _________________________________________________________________________________
Capacitance (locations) _________________________________________________________________________________
Capacitance (locations) _________________________________________________________________________________
Ground Contacts (locations) _____________________________________________________________________________
Insulated feed-thru (locations) ____________________________________________________________________________
Frequency (MHz) Insertion Loss (dB)
1
3
10
30
100
Electrical Requirements:
Working Voltage (VDC or VAC and frequency) ______________________________________________________________
Dielectric Withstand Voltage (VDC) _______________________________________________________________________
Modified Shell: (Flange moved, clinch nuts, helicoils, stand-offs, etc.) _________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Special Requirements: (AC voltage, spike voltage, attenuation testing, thermal cycling, burn-in, capacitor lot
traceabil ity, water immersion, etc.) ________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Contact Termination:
UTS (Crimp) ___________________________________________________________________________________________
Solder Cup ____________________________________________________________________________________________
Compliant Pin __________________________________________________________________________________________
Wire Wrap Flat dim. ________________________________________________________________________________
Stickout dim. ____________________________________________________________________________
PCB tail:
Diameter dim. _________________________________________________________________________________________
Stickout dim. __________________________________________________________________________________________
Pre-tin? _______________________________________________________________________________________________
What is terminated to connector (ie. ex, rigid ex, PCB, etc.)? ________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
Special Cleaning ________________________________________________________________________________________
(if so, recommend a protective cap with an environmental gasket)
Special Stamping: ______________________________________________________________________________________
Customer: _____________________________________________________________________________________________
Program: ______________________________________________________________________________________________
Forecast: ______________________________________________________________________________________________
Requested by: __________________________________________________________________________________________
Comments: ____________________________________________________________________________________________
________________________________________________________________________________________________________
__________________________________________________________________
How to Order - Special
Filter Connectors (EMI Check Sheet)
Email to Filtersapps@amphenol-aao.com
Unable to nd what you are looking for under our “How to Order” page? Fill out our EMI Check Sheet and send it to Filterapps@amphenol-aao.com or call us directly
at 800-678-0141
26 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
FTV Aluminum & FCTV Composite
38999, Series III Features, Alternate Rotations
FTV
AP˚
BSC
BP˚
BSC
DP˚
BSC
CP˚
BSC
MAIN
KEY
PLUG
(front face shown)
AR˚
BSC
BR˚
BSC
BSC
BSC CR˚
DR˚
MAIN
KEYWAY
RECEPTACLE
Composite FCTV Connector for PCB board
mounting. Amphenol is currently the only
supplier of one-piece composite PCB
stand-off shells.
FCTV
The Amphenol® FTV Series III, demonstrates unsurpassed
technical leadership. With added lter features, the high
performance general duty threaded connector is designed to
withstand the pressures of severe environment applications.
The FCTV Series is the Composite Series III with ltering for
EMI/EMP protection. It offers the same high performance as its
metal counterpart, the FTV, but with a lightweight, corrosion
resistance shell.
FTV & FCTV COMPOSITE
INTERMATEABLE WITH MIL-DTL-38999 SERIES III
CONNECTORS
Quick Mating - completely mates in a 360° turn of the
cou pling nut
Lockwiring Eliminated - incorporates anti-decoupling device
Contact Protection - 100% “scoop-proof”
Improved Moisture Resistance - prevents electrolytic
erosion of contacts
Lightweight Composite Shell - 17% – 70% weight
savings over metal
Corrosion Resistant - available in standard MIL-DTL-38999
olive drab cadmium (175°C) and electroless nickel plating
(200°C), both withstanding 2000 hours of salt spray
expo sure. The base material is able to withstand an
indenite exposure to salt spray.
Durability - 1500 couplings minimum (in reference to connec tor
couplings, not contacts)
FTV & FCTV Key/Keyway Positions
Shell
Size
Key & Keyway
arrangement
identification
letter
AR°
or
AP°
BSC
BR°
or
BP°
BSC
CR°
or
CP°
BSC
DR°
or
DP°
BSC
9
N
A
B
C
D
E
105
102
80
35
64
91
140
132
118
140
155
131
215
248
230
205
234
197
265
320
312
275
304
240
11, 13, 15
N
A
B
C
D
E
95
113
90
53
119
51
141
156
145
156
146
141
208
182
195
220
176
184
236
292
252
255
298
242
17 and 19
N
A
B
C
D
E
80
135
49
66
62
79
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
21, 23, 25
N
A
B
C
D
E
80
135
49
66
62
79
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
All angles are BSC
The insert arrangement does not rotate with main key/keyway.
27
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Shell
Size
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
M
+.000
–.005
K
±.0025
R1
TP
R2
TP
S
+.011
–.010
T
+.008
–.006
TT
+.008
–.006
V
Thread
Metric
(Plated)
9 .6250 .773 .1378 .719 .594 .938 .128 .216 M12X1-6g0.100R
11 .7500 .773 .1378 .812 .719 1.031 .128 .194 M15X1-6g0.100R
13 .8750 .773 .1378 .906 .812 1.125 .128 .194 M18X1-6g0.100R
15 1.0000 .773 .1378 .969 .906 1.219 .128 .173 M22X1-6g0.100R
17 1.1875 .773 .1378 1.062 .969 1.312 .128 .194 M25X1-6g0.100R
19 1.2500 .773 .1378 1.156 1.062 1.438 .128 .194 M28X1-6g0.100R
21 1.3750 .741 .1654 1.250 1.156 1.562 .128 .194 M31X1-6g0.100R
23 1.5000 .741 .1654 1.375 1.250 1.688 .154 .242 M34X1-6g0.100R
25 1.6250 .741 .1654 1.500 1.375 1.812 .154 .242 M37X1-6g0.100R
All dimensions for reference only.
S
R1
R2
SR1 R2
B THREAD
V
THREAD
K
M
1.240 MAX.
T
4 PLACES
.005 M
TT
4 PLACES
*
FCTV – MIL-DTL-38999, Series III Composite
Wall Mounting Receptacle
21-76X0
21-85X0
*Note 1. Standard Printed Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
COMPOSITE
21-76X0
21-85X0
PART NUMBER BUILDER Page G23-25
Commercial
28 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Shell
Size
A Dia.
±.010
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
H
Hex
+.017
–.016
R
Thread
Metric
(Plated)
S
±.015
T
+.010
–.000
V
Thread
Metric
(Plated)
W
+.035
–.004
Z
Flat
+.000
–.010
9 1.188 .6250 .875 M17X1-6g0.100R 1.062 .697 M12X1-6g0.100R .086 .669
11 1.375 .7500 1.000 M20X1-6g0.100R 1.250 .822 M15X1-6g0.100R .086 .769
13 1.500 .8750 1.188 M25X1-6g0.100R 1.375 1.007 M18X1-6g0.100R .086 .955
15 1.625 1.0000 1.312 M28X1-6g0.100R 1.500 1.134 M22X1-6g0.100R .086 1.084
17 1.750 1.1875 1.438 M32X1-6g0.100R 1.625 1.259 M25X1-6g0.100R .086 1.208
19 1.937 1.2500 1.562 M35X1-6g0.100R 1.812 1.384 M28X1-6g0.100R .118 1.333
21 2.062 1.3750 1.688 M38X1-6g0.100R 1.938 1.507 M31X1-6g0.100R .118 1.459
23 2.188 1.5000 1.812 M41X1-6g0.100R 2.062 1.634 M34X1-6g0.100R .118 1.575
25 2.312 1.6250 2.000 M44X1-6g0.100R 2.188 1.759 M37X1-6g0.100R .118 1.709
All dimensions for reference only.
S
A
T
H
HEX
.890 MAX.
Z
FLAT
B THREAD
R THREAD
.062 –.125
PANEL THICKNESS
W
1.280 MAX.
V
THREAD
*
FCTV – MIL-DTL-38999, Series III Composite
Jam Nut Receptacle
D shaped mounting hole dimensions
21-76X7
21-85X7
*Note 1. Standard Printed Circuit
Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
COMPOSITE
21-76X7
21-85X7
PART NUMBER BUILDER Page G23-25
Commercial
29
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
.005 M
(4) CORROSION RESISTANT STEEL
.112-40 UNC-3B INSERTS
A
T
W
2 PLACES
B THREAD
M
.673 ±.002
.132 ±.020
SEE NOTE 1
K MAX.
PANEL THICKNESS
*
S
2 PLACES
R1
.005 M
(4) CORROSION RESISTANT STEEL
.112-40 UNC-3B SELF-LOCKING
CLINCH NUTS PER MIL-N-45938/6-4C
2 PLACES 45°
Shell
Size
A
Dia.
±.005
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
M
+.003
–.003
K Max.
Panel
Thickness
R1
TP
S
+.011
–.010
PCB Mounting
Dimensions
T Dia.
TP
W
TP
9 1.016 .6250 .770 .234 .719 .938 .752 .532
11 1.148 .7500 .770 .234 .812 1.031 .850 .601
13 1.250 .8750 .770 .234 .906 1.125 .994 .703
15 1.375 1.0000 .770 .234 .969 1.219 1.119 .791
17 1.500 1.1875 .770 .234 1.062 1.312 1.237 .875
19 1.625 1.2500 .770 .234 1.156 1.438 1.379 .975
21 1.750 1.3750 .738 .204 1.250 1.562 1.489 1.053
23 1.875 1.5000 .738 .204 1.375 1.688 1.619 1.145
25 2.000 1.6250 .738 .204 1.500 1.812 1.744 1.233
FCTV – MIL-DTL-38999, Series III Composite
Box Mount Receptacle (Printed Circuit Board Mount)
21-78X2
All dimensions for reference only.
*Note 1. Standard Printed Circuit
Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Please consult Amphenol Aerospace for additional lengths.
PART NUMBER BUILDER Page G23-25
COMPOSITE
21-78X2
Commercial
30 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
A
H
HEX
.673 ±.002
.132 ±.020
SEE NOTE 1
W
V
M
.889 MAX.
B THREAD
R THREAD .062-.125
PANEL THICKNESS
(4) CORROSION RESISTANT STEEL
.112-40 UNC-3B INSERTS
.005 M
2 PLACES
T
Z
FLAT
45°
*
Shell
Size
A
Dia.
±.005
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
H
Hex
+.017
–.016
M
Dia.
±.005
R
Thread
Metric
(Plated)
S
+.011
–.010
T•
Dia.
+.010
–.000
PCB Mounting
Dimensions Z•
Flat
+.000
–.010
W
TP
V Dia.
TP
9 1.188 .6250 .875 1.016 M17X1-6g0.100R 1.062 .697 .532 .752 .669
11 1.375 .7500 1.000 1.148 M20X1-6g0.100R 1.250 .822 .601 .850 .769
13 1.500 .8750 1.188 1.250 M25X1-6g0.100R 1.375 1.007 .703 .994 .955
15 1.625 1.0000 1.312 1.375 M28X1-6g0.100R 1.500 1.134 .791 1.119 1.084
17 1.750 1.1875 1.438 1.500 M32X1-6g0.100R 1.625 1.259 .875 1.237 1.208
19 1.937 1.2500 1.562 1.625 M35X1-6g0.100R 1.812 1.384 .975 1.379 1.333
21 2.062 1.3750 1.688 1.750 M38X1-6g0.100R 1.937 1.507 1.053 1.489 1.459
23 2.188 1.5000 1.812 1.875 M41X1-6g0.100R 2.062 1.634 1.145 1.619 1.575
25 2.312 1.6250 2.000 2.000 M44X1-6g0.100R 2.188 1.759 1.233 1.744 1.709
All dimensions for reference only.
FCTV – MIL-DTL-38999, Series III Composite
Jam Nut Receptacle (Printed Circuit Board Mount)
21-78X7
*Note 1. Standard Printed Circuit
Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Please consult Amphenol Aerospace for additional lengths.
“D” shaped mounting hole dimensions
COMPOSITE
21-78X7
PART NUMBER BUILDER Page G23-25
Commercial
31
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
FTV – MIL-DTL-38999, Series III
Wall Mounting Receptacle - Aluminum
Shell
Size
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
M
+.000
–.005
LL
+.006
–.000
R1
TP
R2
TP
S
Max
T
+.008
–.006
V
Thread
Metric
(Plated)
TT
+.008
–.006
9 .6250 .820 .905 .719 .594 .948 .128 M12X1-6g0.100R .216
11 .7500 .820 .905 .812 .719 1.043 .128 M15X1-6g0.100R .194
13 .8750 .820 .905 .906 .812 1.137 .128 M18X1-6g0.100R .194
15 1.0000 .820 .905 .969 .906 1.232 .128 M22X1-6g0.100R .173
17 1.1875 .820 .905 1.062 .969 1.323 .128 M25X1-6g0.100R .194
19 1.2500 .820 .905 1.156 1.062 1.449 .128 M28X1-6g0.100R .194
21 1.3750 .790 .905 1.250 1.156 1.575 .128 M31X1-6g0.100R .194
23 1.5000 .790 .905 1.375 1.250 1.701 .154 M34X1-6g0.100R .242
25 1.6250 .790 .905 1.500 1.375 1.823 .154 M37X1-6g0.100R .242
S
R1
R2
SR1 R2
B THREAD
V THREAD
M
LL
1.240 MAX.
T
4 PLACES
.005 M
TT
4 PLACES
*
All dimensions for reference only.
Shell
Size
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
M
+.000
–.005
R1
TP
R2
TP
S
±.010
T
+.008
–.006
V
Thread
Metric
(Plated)
TT
+.008
–.006
9 .6250 .820 .719 .594 .938 .128 M12X1-6g0.100R .216
11 .7500 .820 .812 .719 1.031 .128 M15X1-6g0.100R .194
13 .8750 .820 .906 .812 1.125 .128 M18X1-6g0.100R .194
15 1.0000 .820 .969 .906 1.219 .128 M22X1-6g0.100R .173
17 1.1875 .820 1.062 .969 1.312 .128 M25X1-6g0.100R .194
19 1.2500 .820 1.156 1.062 1.438 .128 M28X1-6g0.100R .194
21 1.3750 .790 1.250 1.156 1.562 .128 M31X1-6g0.100R .194
23 1.5000 .790 1.375 1.250 1.688 .154 M34X1-6g0.100R .242
25 1.6250 .790 1.500 1.375 1.812 .154 M37X1-6g0.100R .242
S
R
R
1
2
R1
R2
S
4 PLACES
TT
T
4 PLACES
.005 M
M.896
MAX.
B THREAD V THREAD
.905
1.466
MAX.
+.006
–.000
*
21-77X0
21-79X0
21-52X0
(Extended length shell**)
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact
termination is Solder Cup.
Please consult Amphenol Aerospace
for additional lengths.
**Extended length accommodate
higher voltage and/or higher
capacitance applications.
Plug movement required to clear FTV
receptacles: .625 min.
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact
termination is Solder Cup.
Please consult
Amphenol Aerospace for
additional lengths.
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-77X0
21-79X0
EXTENDED
LENGTH BELOW
21-52X0
Commercial
32 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Shell
Size
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
E
+.000
–.005
R1
TP
R2
TP
S
±.010
T
+.008
–.006
V
Thread
Metric
(Plated)
TT
+.008
–.006
9 .6250 .820 .719 .594 .938 .128 M15X1-6g0.100R .216
11 .7500 .820 .812 .719 1.031 .128 M18X1-6g0.100R .194
13 .8750 .820 .906 .812 1.125 .128 M22X1-6g0.100R .194
15 1.0000 .820 .969 .906 1.219 .128 M25X1-6g0.100R .173
17 1.1875 .820 1.062 .969 1.312 .128 M28X1-6g0.100R .194
19 1.2500 .820 1.156 1.062 1.438 .128 M31X1-6g0.100R .194
21 1.3750 .790 1.250 1.156 1.562 .128 M34X1-6g0.100R .194
23 1.5000 .790 1.375 1.250 1.688 .154 M37X1-6g0.100R .242
25 1.6250 .790 1.500 1.375 1.812 .154 M41X1-6g0.100R .242
All dimensions for reference only.
S
R
R
1
2
R1
R2
S
4 PLACES
TT
T
4 PLACES
.005 M
B THREAD
E
+.006
–.000
.905
V THREAD
1.922 MAX.
.100
MAX.
FTV – MIL-DTL-38999, Series III
Wall Mounting Receptacle - Aluminum (UTS Crimp)
21-50X0
UTS (Crimp) Contact
SAE AS39029/57
UTS (Crimp ) Contact SAE AS39029/57
ALUMINUM
21-50X0
PART NUMBER BUILDER Page G23-25
Commercial
33
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Shell
Size
A Dia
Max
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
H
Hex
+.017
–.016
R
Thread Metric
(Plated)
S
±.010
TDia
+.010
–.000
V
Thread
Metric
(Plated)
W
+.011
–.010
Z•
Flat
+.000
–.010
9 1.199 .6250 .875 M17X1-6g0.100R 1.062 .697 M12X1-6g0.100R .871 .669
11 1.386 .7500 1.000 M20X1-6g0.100R 1.250 .822 M15X1-6g0.100R .871 .769
13 1.511 .8750 1.188 M25X1-6g0.100R 1.375 1.007 M18X1-6g0.100R .878 .955
15 1.636 1.0000 1.312 M28X1-6g0.100R 1.500 1.134 M22X1-6g0.100R .878 1.084
17 1.761 1.1875 1.438 M32X1-6g0.100R 1.625 1.259 M25X1-6g0.100R .878 1.208
19 1.949 1.2500 1.562 M35X1-6g0.100R 1.812 1.384 M28X1-6g0.100R .878 1.333
21 2.073 1.3750 1.688 M38X1-6g0.100R 1.938 1.507 M31X1-6g0.100R .878 1.459
23 2.199 1.5000 1.812 M41X1-6g0.100R 2.062 1.634 M34X1-6g0.100R .878 1.575
25 2.323 1.6250 2.000 M44X1-6g0.100R 2.188 1.759 M37X1-6g0.100R .878 1.709
S
T•
H
HEX
Z
FLAT
B THREAD
R THREAD
.062 –.125
PANEL THICKNESS
W
1.280 MAX.
V THREAD
A Dia.
*
All dimensions for reference only.
FTV – MIL-DTL-38999, Series III
Jam Nut Receptacle (Mil-Spec Length) - Aluminum
Shell
Size
A
+.000
–.010
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
C
Max
H
Hex
+.017
–.016
M
+.011
–.010
R
Thread
(Plated)
S
+.011
–.010
T
+.010
–.000
V
Thread
Metric
(Plated)
9 .669 .6250 1.199 .875 .871 M17X1-6g0.100R 1.062 .697 M12X1-6g0.100R
11 .769 .7500 1.386 1.000 .871 M20X1-6g0.100R 1.250 .822 M15X1-6g0.100R
13 .955 .8750 1.511 1.188 .878 M25X1-6g0.100R 1.375 1.007 M18X1-6g0.100R
15 1.084 1.0000 1.636 1.312 .878 M28X1-6g0.100R 1.500 1.134 M22X1-6g0.100R
17 1.208 1.1875 1.761 1.438 .878 M32X1-6g0.100R 1.625 1.259 M25X1-6g0.100R
19 1.333 1.2500 1.949 1.562 .878 M35X1-6g0.100R 1.812 1.384 M28X1-6g0.100R
21 1.459 1.3750 2.073 1.688 .878 M38X1-6g0.100R 1.938 1.507 M31X1-6g0.100R
23 1.575 1.5000 2.199 1.812 .878 M41X1-6g0.100R 2.062 1.634 M34X1-6g0.100R
25 1.709 1.6250 2.323 2.000 .878 M44X1-6g0.100R 2.188 1.759 M37X1-6g0.100R
**Extended length to
accommodate higher voltage
and/or higher capacitance
applications.
Plug movement required to clear
FTV receptacles: .625 min.
C
T•
H
HEX
S
A
.062 MIN.
.125 MAX.
PANEL THICKNESS
B
THREAD
R
THREAD
M
V
THREAD
.976
MAX.
1.466 MAX.
*
21-52X7
C
T•
H
HEX
S
A
.062 MIN.
.125 MAX.
PANEL THICKNESS
B THREAD
R
THREAD
M
V
THREAD
.976
MAX.
1.466 MAX.
*
S
T•
H
HEX
Z
FLAT
B THREAD
R THREAD
.062 –.125
PANEL THICKNESS
W
1.280 MAX.
V THREAD
A Dia.
*
(Extended length shell**)
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact
termination is Solder Cup.
Please consult
Amphenol Aerospace for
additional lengths.
“D” shaped mounting hole dimensions
“D” shaped mounting hole dimensions
PART NUMBER BUILDER Page G23-25
ALUMINUM
MIL-SPEC LENGTH
21-77X7
21-79X7
EXTENDED LENGTH
BELOW
21-52X7
Commercial
21-77X7
21-79X7
34 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
“D” shaped mounting hole dimensions
Plug movement required to clear FTV receptacles: .625 min.
Shell
Size
A
+.000
–.010
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
C
Max
H
Hex
+.017
–.016
M
±.005
R
Thread
(Plated)
S
+.011
–.010
T
+.010
–.000
V
Thread
Metric
(Plated)
9 .669 .6250 1.199 .875 .871 M17X1-6g0.100R 1.062 .697 M15X1-6g0.100R
11 .769 .7500 1.386 1.000 .871 M20X1-6g0.100R 1.250 .822 M18X1-6g0.100R
13 .955 .8750 1.511 1.188 .878 M25X1-6g0.100R 1.375 1.007 M22X1-6g0.100R
15 1.084 1.0000 1.636 1.312 .878 M28X1-6g0.100R 1.500 1.134 M25X1-6g0.100R
17 1.208 1.1875 1.761 1.438 .878 M32X1-6g0.100R 1.625 1.259 M28X1-6g0.100R
19 1.333 1.2500 1.949 1.562 .878 M35X1-6g0.100R 1.812 1.384 M31X1-6g0.100R
21 1.459 1.3750 2.073 1.688 .878 M38X1-6g0.100R 1.938 1.507 M34X1-6g0.100R
23 1.575 1.5000 2.199 1.812 .878 M41X1-6g0.100R 2.062 1.634 M37X1-6g0.100R
25 1.709 1.6250 2.323 2.000 .878 M44X1-6g0.100R 2.188 1.759 M41X1-6g0.100R
All dimensions for reference only.
C
H
HEX
S
T
A
.062 MIN.
.125 MAX.
PANEL THICKNESS
B
THREAD
R
THREAD
M
1.922 MAX.
V
THREAD
.100
MAX.
FTV – MIL-DTL-38999, Series III
Jam Nut Receptacle - Aluminum (UTS Crimp)
21-50X7
UTS (Crimp ) Contact SAE AS39029/57
ALUMINUM
21-50X7
PART NUMBER BUILDER Page G23-25
Commercial
35
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
R1
S
(4) CORROSION
RESISTANT STEEL
.112-40 UNC-3B CLINCH NUTS
.005 M
B THREAD
K45°
V
W
2 PLACES
J
.673 ±.002
.132 ±.020
.830
±.005
SEE NOTE 1
(4) CORROSION RESISTANT STEEL
HELICAL COIL WITH LOCKING THREADS
.112-40 UNC-3B INSERTS
.005 M
*
Shell
Size
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
J
Dia.
±.005
K
±.005
R1
TP
S
±.010
PCB Mounting
Dimensions
W
TP
V Dia.
TP
9 .6250 1.016 .085 .719 .938 .532 .752
11 .7500 1.062 .085 .812 1.031 .601 .850
13 .8750 1.250 .085 .906 1.125 .703 .994
15 1.0000 1.375 .085 .969 1.219 .791 1.119
17 1.1875 1.500 .085 1.062 1.312 .875 1.237
19 1.2500 1.625 .085 1.156 1.438 .975 1.379
21 1.3750 1.750 .115 1.250 1.562 1.053 1.489
23 1.5000 1.875 .115 1.375 1.688 1.145 1.619
25 1.6250 2.000 .115 1.500 1.812 1.233 1.744
FTV – MIL-DTL-38999, Series III
Box Mount Receptacle - Aluminum (Printed Circuit Board Mount)
All dimensions for reference only.
21-80X2
21-81X2
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Please consult Amphenol Aerospace for additional lengths
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-80X2
21-81X2
Commercial
36 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Please consult Amphenol Aerospace for additional lengths
Shell
Size
A
Dia.
±.010
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
H
Hex
+.017
–.016
J
Dia.
±.005
R
Thread
Metric
(Plated)
S
±.015
T
Dia.
+.010
–.000
PCB Mounting
Dimensions Z
Flat
+.000
–.010
W
TP
V Dia.
TP
9 1.188 .6250 .875 1.016 M17X1-6g0.100R 1.062 .697 .532 .752 .669
11 1.375 .7500 1.000 1.062 M20X1-6g0.100R 1.250 .822 .601 .850 .769
13 1.500 .8750 1.188 1.250 M25X1-6g0.100R 1.375 1.007 .703 .994 .955
15 1.625 1.0000 1.312 1.375 M28X1-6g0.100R 1.500 1.134 .791 1.119 1.084
17 1.750 1.1875 1.438 1.500 M32X1-6g0.100R 1.625 1.259 .875 1.237 1.208
19 1.937 1.2500 1.562 1.625 M35X1-6g0.100R 1.812 1.384 .975 1.379 1.333
21 2.062 1.3750 1.688 1.750 M38X1-6g0.100R 1.937 1.507 1.053 1.489 1.459
23 2.188 1.5000 1.812 1.875 M41X1-6g0.100R 2.062 1.634 1.145 1.619 1.575
25 2.312 1.6250 2.000 2.000 M44X1-6g0.100R 2.188 1.759 1.233 1.744 1.709
S
A
H
HEX
.673 ±.002
.132 ±.020
SEE NOTE 1 45°
W
2 PLACES
V
J
.830 ±.005
B THREAD
R THREAD
.062-.125
PANEL THICKNESS
T
Z
FLAT
(4) CORROSION RESISTANT STEEL
HELICAL COIL WITH LOCKING THREADS
.112-40 UNC-3B INSERTS
.005 M
*
FTV – MIL-DTL-38999, Series III
Jam Nut Receptacle - Aluminum (Printed Circuit Board Mount)
21-80X7
21-81X7
All dimensions for reference only.
“D” shaped mounting hole dimensions
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
ALUMINUM
21-80X7
21-81X7
PART NUMBER BUILDER Page G23-25
Commercial
37
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
The Amphenol® FJT Series space and weight saving design,
coupled with a lter, gives high reliability.
Intermateable with MIL-DTL-38999/27599 Series II
connec tors (see Catalog 38999, Series II JT section)
Quick positive coupling – 3 point bayonet locking
Error-proof alternate positioning of shell keyways
Higher reliability and greater durability with
permanently encapsulated contacts
Environmental resistant
Aluminum shells with several nish options
FJT MASTER KEY/KEYWAY ROTATION
Shell
Size
AB Angle of Rotation (Degrees)
Normal A B C D
8 100 82 118
10 100 86 72 128 114
12 100 80 68 132 120
14 100 79 66 134 121
16 100 82 70 130 118
18 100 82 70 130 118
20 100 82 70 130 118
22 100 85 74 126 115
24 100 85 74 126 115
A plug with a given rotation letter will mate with a
receptacle with the same rotation letter. The AB angle for a
given connec tor is the same whether it contains pins or
sockets. Inserts are not rotated in conjunction with the
master key/keyway.
AB angles shown are viewed from the front face of the
connec tor. A receptacle is shown at right. The angles for the
plug are exactly the same, except the direction of rotation is
opposite of that shown for the receptacle.
ROTATION
LETTERS
NORMAL
BADC
AB
10 JT REF
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of receptacle shown)
˚
FJT – MIL-DTL-38999, Series II
Features, Alternate Rotations
FJT
Rotations
38 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
R
R
S
.005 M
T
4 HOLES
V THREAD
.322 +.000
–.005
+.006
–.000 1.066
MAX.
.380
.322 +.000
–.005
+.006
–.000
.380
N
Z
MAX.
P*
Z
MAX.
N
P*
V THREAD
1.542
MAX.
*
Shell
Size
N
Dia
+.001
–.005
P*
Max.
R
(TP)
S
+.011
–.010
T
Dia.
±.005
V
Thread
UNEF-2A
(Plated)
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 22
Contact
Z Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
8 .473 .022 .594 .812 .120 .4375-28 .937 .952 .902 1.300 1.496
10 .590 .027 .719 .938 .120 .5625-24 .937 .952 .902 1.300 1.496
12 .750 .027 .812 1.031 .120 .6875-24 .937 .952 .902 1.300 1.496
14 .875 .027 .906 1.125 .120 .8125-20 .937 .952 .902 1.300 1.496
16 1.000 .027 .969 1.219 .120 .9375-20 .937 .952 .902 1.300 1.496
18 1.125 .027 1.062 1.312 .120 1.0625-18 .937 .952 .902 1.300 1.496
20 1.250 .054 1.156 1.438 .120 1.1875-18 .937 .952 .902 1.300 1.496
22 1.375 .054 1.250 1.562 .120 1.3125-18 .937 .952 .902 1.300 1.496
24 1.500 .054 1.375 1.688 .147 1.4375-18 .937 .952 .902 1.300 1.496
All dimensions for reference only.
21-24X0 (MS27334)
21-32X0 (MS27334)
21-37X0 (MS27334)
FJT – MIL-DTL-38999, Series II
Wall Mounting Receptacle - Aluminum
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup
Please consult Amphenol Aerospace for additional lengths
Plug movement required to clear FJT receptacles: .281 min.
* Acceptable panel thickness for back panel mounting a standard receptacle.
ALUMINUM
21-24X0
21-32X0
21-37X0
PART NUMBER BUILDER Page G23-25
MILITARY
MS27334
Commercial
39
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
SR
R
S
.005 M
T
4 HOLES
P
Z
MAX.
.447 +.000
–.005
NW
.322 +.000
–.005
.505 +.006
–.000 1.066
MAX.
V THREAD
P
Z
MAX.
.447 +.000
–.005
.322 +.000
–.005
.505 +.006
–.000 1.542
MAX.
*
WN
V
THREAD
Shell
Size
N
Dia
+.001
–.005
P
Max.
Panel
Thickness
R
(TP)
S
+.011
–.010
T
Dia.
±.005
V
Thread
UNEF-2A
(Plated)
W
Dia.
+.001
–.005
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
Size 16 or
16 & 20
Contacts
Z Max.
Size 20
or 22
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 20
Contact
Z Max.
8 .473 .147 .594 .812 .120 .4375-28 .516 .900 .875 1.385 1.285
10 .590 .152 .719 .938 .120 .5625-24 .633 .900 .875 1.385 1.285
12 .750 .152 .812 1.031 .120 .6875-24 .802 .900 .875 1.385 1.285
14 .875 .152 .906 1.125 .120 .8125-20 .927 .900 .875 1.385 1.285
16 1.000 .152 .969 1.219 .120 .9375-20 1.052 .900 .875 1.385 1.285
18 1.125 .152 1.062 1.312 .120 1.0625-18 1.177 .900 .875 1.385 1.285
20 1.250 .179 1.156 1.438 .120 1.1875-18 1.302 .900 .875 1.385 1.285
22 1.375 .179 1.250 1.562 .120 1.3125-18 1.427 .900 .875 1.385 1.285
24 1.500 .179 1.375 1.688 .147 1.4375-18 1.552 .900 .875 1.385 1.285
All dimensions for reference only.
21-34X0 (MS27497)
21-39X0 (MS27497)
21-38X0 (MS27497)
FJTP – MIL-DTL-38999, Series II
Wall Mounting Receptacle - Aluminum (Back Panel Mounting)
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup
Please consult Amphenol Aerospace for additional lengths.
Plug movement required to clear FJT receptacles: .281 min.
ALUMINUM
21-34X0
21-38X0
21-39X0
PART NUMBER BUILDER Page G23-25
MILITARY
MS27497
Commercial
40 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
SR
R
S
.005 M
T
HOLES
N
+.000
–.005
.322
.380+.006
–.000
1.542
MAX.
Z
MAX.
Z
MAX.
K
+.000
–.005
.322
.380+.006
–.000
1.066
MAX.
*
*
NK
Shell
Size
K
Dia.
+.000
–.007
N
Dia
+.001
–.005
R
(TP)
S
+.011
–.010
T
Dia.
±.005
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 22
Contact
Z Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
8 .438 .473 .594 .812 .120 .937 .952 .902 1.300 1.496
10 .562 .590 .719 .938 .120 .937 .952 .902 1.300 1.496
12 .688 .750 .812 1.031 .120 .937 .952 .902 1.300 1.496
14 .812 .875 .906 1.125 .120 .937 .952 .902 1.300 1.496
16 .938 1.000 .969 1.219 .120 .937 .952 .902 1.300 1.496
18 1.062 1.125 1.062 1.312 .120 .937 .952 .902 1.300 1.496
20 1.188 1.250 1.156 1.438 .120 .937 .952 .902 1.300 1.496
22 1.312 1.375 1.250 1.562 .120 .937 .952 .902 1.300 1.496
24 1.438 1.500 1.375 1.688 .147 .937 .952 .902 1.300 1.496
All dimensions for reference only.
FJT – MIL-DTL-38999, Series II
Box Mounting Receptacle - Aluminum
21-24X2
21-32X2
SIMULAR TO
MS27335
21-37X2
SIMULAR TO
MS27335
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
Plug movement required to clear FJT receptacles: .281 min.
ALUMINUM
21-24X2
21-32X2
21-37X2
PART NUMBER BUILDER Page G23-25
Commercial
41
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
N
1.066
MAX.
Z
MAX.
K
W
.447 +.000
–.005
+.000
–.005
.322
+.006
–.000
.505
P
Z
MAX.
.447 +.000
–.005
P
1.542
MAX.
+.000
–.005
.322
+.006
–.000
.505
*
*
NK
W
SR
R
S
.005 M
T
4 HOLES
Shell
Size
K
Dia.
+.000
–.007
N
Dia
+.001
–.005
P
Max.
Panel
Thickness
R
(TP)
S
+.011
–.010
T
Dia.
±.005
W
Dia.
+.001
–.005
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
Size 16 or
16 & 20
Contacts
Z Max.
Size 20
or 22
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 20
Contact
Z Max.
8 .438 .473 .147 .594 .812 .120 .516 .900 .875 1.385 1.285
10 .562 .590 .152 .719 .938 .120 .633 .900 .875 1.385 1.285
12 .688 .750 .152 .812 1.031 .120 .802 .900 .875 1.385 1.285
14 .812 .875 .152 .906 1.125 .120 .927 .900 .875 1.385 1.285
16 .938 1.000 .152 .969 1.219 .120 1.052 .900 .875 1.385 1.285
18 1.062 1.125 .152 1.062 1.312 .120 1.177 .900 .875 1.385 1.285
20 1.188 1.250 .179 1.156 1.438 .120 1.302 .900 .875 1.385 1.285
22 1.312 1.375 .179 1.250 1.562 .120 1.427 .900 .875 1.385 1.285
24 1.438 1.500 .179 1.375 1.688 .147 1.552 .900 .875 1.385 1.285
All dimensions for reference only.
21-34X2
21-39X2
SIMULAR TO
MS27508
21-38X2
SIMULAR TO
MS27508
FJTP – MIL-DTL-38999, Series II
Box Mounting Receptacle - Aluminum (Back Panel Mounting)
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
Plug movement required to clear FJT receptacles: .281 min.
ALUMINUM
21-34X2
21-39X2
21-38X2
PART NUMBER BUILDER Page G23-25
Commercial
42 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
2 PLACES
H
HEX
C
A
T
3 LOCKWIRE HOLES
.059 DIA. MIN.
PANEL THICKNESS
.062-.109
V THREAD
3 LOCKWIRE HOLES
.059 DIA. MIN.
PANEL THICKNESS
.062-.109
N
R
THREAD
M
Z
1.066
MAX.
R
THREAD
M
1.632
MAX.
N
V THREAD
*
*
Shell
Size
A
Flat
+.000
–.010
C
Dia.
+.011
–.010
H
Hex
+.017
–.016
M
±.005
N
Dia
+.001
–.005
R
Thread
(Plated)
Class -2A
S
±.010
T
Dia.
+.010
–.000
V
Thread
UNEF-2A
(Plated)
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
Size 16 or
16 & 20
Contacts
Z Max.
Size 20
Contact
Z Max.
Size 22
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 20
Contact
Z Max.
8 .830 1.375 1.062 .438 .473 .8750-20UNEF 1.250 .884 .4375-28 .900 .884 .849 1.443 1.276
10 .955 1.500 1.188 .438 .590 1.0000-20UNEF 1.375 1.007 .5625-24 .900 .884 .849 1.443 1.276
12 1.084 1.625 1.312 .438 .750 1.1250-18UNEF 1.500 1.134 .6875-24 .900 .884 .849 1.443 1.276
14 1.208 1.750 1.438 .438 .875 1.2500-18UNEF 1.625 1.259 .8125-20 .900 .884 .849 1.443 1.276
16 1.333 1.938 1.562 .438 1.000 1.3750-18UNEF 1.781 1.384 .9375-20 .900 .884 .849 1.443 1.276
18 1.459 2.016 1.688 .438 1.125 1.5000-18UNEF 1.890 1.507 1.0625-18 .900 .884 .849 1.443 1.276
20 1.576 2.141 1.812 .464 1.250 1.6250-18UNEF 2.016 1.634 1.1875-18 .874 .858 .823 1.443 1.276
22 1.701 2.265 2.000 .464 1.375 1.7500-18UNS 2.140 1.759 1.3125-18 .874 .858 .823 1.417 1.250
24 1.826 2.390 2.125 .464 1.500 1.8750-16UN 2.265 1.884 1.4375-18 .874 .858 .823 1.417 1.250
All dimensions for reference only.
21-24X7
21-32X7
SIMULAR TO
MS27337
21-37X7
SIMULAR TO
MS27337
FJT – MIL-DTL-38999, Series II
Jam Nut Receptacle - Aluminum
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
“D” shaped mounting hole dimensions. Plug movement required to clear FJT receptacles: .281 min.
ALUMINUM
21-24X7
21-32X7
21-37X7
PART NUMBER BUILDER Page G23-25
Commercial
43
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
2 PLACES
H
HEX
C
A
T
N
3 LOCKWIRE HOLES
.044 DIA. MIN.
1.361
MAX.
PANEL THICKNESS
.062 -.603
R
THREAD M
Z MIN.
R
THREAD
M1
3 LOCKWIRE HOLES
.044 DIA. MIN.
1.735
MAX.
PANEL THICKNESS
.062 -1.000
N
Z MIN.
*
*
Shell
Size
A
Flat
+.000
–.010
C
Dia.
+.011
–.010
H
Hex
+.017
–.016
M
±.005
M1
±.005
N
Dia
+.001
–.005
R
Thread
UNEF-2A
(Plated)
S
+.011
–.010
T
Dia.
+.010
–.000
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
Size 16 or
16 & 20
Contacts
Z Max.
Size 20
Contact
Z Max.
Size 22
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 20
Contact
Z Max.
8 .542 1.062 .750 1.220 1.594 .473 .5625-24 .938 .572 .000 .022 .057 .000 .000
10 .669 1.188 .875 1.220 1.594 .590 .6875-24 1.062 .697 .000 .022 .057 .000 .000
12 .830 1.375 1.062 1.220 1.594 .750 .8750-20 1.250 .844 .000 .022 .057 .000 .000
14 .955 1.500 1.188 1.220 1.594 .875 1.0000-20 1.375 1.007 .000 .022 .057 .000 .000
16 1.084 1.625 1.312 1.220 1.594 1.000 1.1250-18 1.500 1.134 .000 .022 .057 .000 .000
18 1.208 1.750 1.438 1.220 1.594 1.125 1.2500-18 1.625 1.259 .000 .022 .057 .000 .000
20 1.333 1.938 1.562 1.188 1.563 1.250 1.3750-18 1.812 1.384 .000 .022 .057 .000 .000
22 1.459 2.062 1.688 1.188 1.563 1.375 1.5000-18 1.938 1.507 .000 .022 .057 .000 .000
24 1.575 2.188 1.812 1.188 1.563 1.500 1.6250-18 2.062 1.634 .000 .022 .057 .000 .000
All dimensions for reference only.
21-24X4
21-32X4
21-37X4
FJTP – MIL-DTL-38999, Series II
Jam Nut Receptacle - Aluminum (Minimum Penetration)
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths “D” shaped mounting hole.
dimensions Plug movement required to clear FJT receptacles: .281 min.
ALUMINUM
21-24X4
21-32X4
21-37X7
PART NUMBER BUILDER Page G23-25
Commercial
44 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
The Amphenol® FLJT Series offers all the design features of the FJT
plus a 100% “scoop-proof” contact protection design.
Intermountable with MIL-DTL-38999/27599 Series I
connec tors (see Catalog 38999, Series I LJT section)
Contact Protection - shell design prevents
contact damage
Quick Positive Coupling – 3 point bayonet locking
Higher reliability and greater durability with
permanently encapsulated contacts
Environmental Resistant
Aluminum shells with several nish options
Error-proof alternate positioning of shell keyways
Corrosion Resistant - 500 hour salt spray olive drab
cad mium over nickel plating, class T (aluminum), electroless
nickel plating, class F (aluminum) or stainless steel shells
FLJT – MIL-DTL-38999, Series I
Features, Alternate Rotations
A plug with a given rotation letter will mate with a
receptacle with the same rotation letter. The AB angle for
a given connec tor is the same whether it contains pins or
sockets. Inserts are not rotated in conjunction with the
master key/keyway.
AB angles shown are viewed from the front face of the
connec tor. A receptacle is shown at right. The angles for
the plug are exactly the same, except the direction of
rotation is opposite of that shown for the receptacle.
FLJT
Rotations
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of receptacle shown)
ROTATION
LETTERS
NORMAL
BADC
AB
5 LJT REF
˚
FLJT MASTER KEY/KEYWAY ROTATION
Shell
Size
AB Angle of Rotation (Degrees)
Normal A B C D
9 95 77 113
11 95 81 67 123 109
13 95 75 63 127 115
15 95 74 61 129 116
17 95 77 65 125 113
19 95 77 65 125 113
21 95 77 65 125 113
23 95 80 69 121 110
25 95 80 69 121 110
45
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
R
S R
T
4 HOLES
.005 M
N
Z
MAX.
V THREAD
M
1.403
MAX.
+.005
–.000
.717
Z
MAX.
N
V THREAD
M
1.403
MAX.
+.005
–.000
.717
*
*
Shell
Size
M
+.000
–.006
N
Dia.
+.001
–.005
R
(TP)
S
+.011
–.010
T
Dia.
±.005
V
Thread
UNEF-2A
(Plated)
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 22
Contact
Z Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
9 .632 .572 .719 .938 .128 .4375-28 .865 .950 .820 1.324 1.394
11 .632 .700 .812 1.031 .128 .5625-24 .865 .950 .820 1.324 1.394
13 .632 .850 .906 1.125 .128 .6875-24 .865 .950 .820 1.324 1.394
15 .632 .975 .969 1.219 .128 .8125-20 .865 .950 .820 1.324 1.394
17 .632 1.100 1.062 1.312 .128 .9375-20 .865 .950 .820 1.324 1.394
19 .632 1.207 1.156 1.438 .128 1.0625-18 .865 .950 .820 1.324 1.394
21 .602 1.332 1.250 1.562 .128 1.1875-18 .865 .950 .820 1.324 1.394
23 .602 1.457 1.375 1.688 .147 1.3125-18 .865 .950 .820 1.324 1.394
25 .602 1.582 1.500 1.812 .147 1.4375-18 .865 .950 .820 1.324 1.394
All dimensions for reference only.
21-29X0
21-40X0
21-36X0
FLJT – MIL-DTL-38999, Series I
Wall Mounting Receptacle - Aluminum
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
Plug movement required to clear FLJT receptacles: .625 min.
ALUMINUM
21-29X0
21-40X0
21-36X0
PART NUMBER BUILDER Page G23-25
Commercial
46 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
R
S R
T
4 HOLES
.005 M
Z
MAX.
V THREAD
M
1.403
MAX.
+.005
–.000
.905
N
P*
P*
D
V THREAD
1
+.005
–.000
.921
+.006
–.000
1.021
1.921
MAX.
N
.100
MAX.
Plug movement required to clear FLJT receptacles: .625 min.
* Acceptable panel thickness for back panel mounting a standard receptacle.
Shell
Size
D
Dia.
±.005
M
+.000
–.006
N
Dia.
+.001
–.005
P
Max.
Panel
Thickness
R
(TP)
S
+.011
–.010
T
Dia.
±.005
V
Thread
UNEF-2A
(Plated)
V1
Thread
UNEF-2A
(Plated)
SHORT SHELL
VHF/UHF Filters
Size 20
Contact
Z Max.
Size 16 or 16
& 20
Contacts
Z Max.
Size 22
Contact
Z Max.
9 .299 .820 .572 .234 .719 .938 .128 .4375-28 .5625-24 .672 .763 .632
11 .427 .820 .700 .234 .812 1.031 .128 .5625-24 .6875-24 .672 .763 .632
13 .541 .820 .850 .234 .906 1.125 .128 .6875-24 .8125-20 .672 .763 .632
15 .666 .820 .975 .234 .969 1.219 .128 .8125-20 .9375-20 .672 .763 .632
17 .791 .820 1.100 .234 1.062 1.312 .128 .9375-20 1.0625-18 .672 .763 .632
19 .897 .820 1.207 .234 1.156 1.438 .128 1.0625-18 1.1875-18 .672 .763 .632
21 1.022 .790 1.332 .204 1.250 1.562 .128 1.1875-18 1.3125-18 .672 .763 .632
23 1.147 .790 1.457 .204 1.375 1.688 .147 1.3125-18 1.4375-18 .672 .763 .632
25 1.272 .790 1.582 .193 1.500 1.812 .147 1.4375-18 1.5625-18 .672 .763 .632
All dimensions for reference only.
21-47X0
21-48X0
UTS (Crimp) Contact
SAE AS39029/57
FLJTPQ – MIL-DTL-38999, Series I
Wall Mounting Receptacle - Aluminum (Back Panel Mounting, UTS Crimp)
ALUMINUM
21-47X0
21-48X0
PART NUMBER BUILDER Page G23-25
Commercial
47
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
R
S R
T
4 HOLES
.005 M
N
Z
MAX.
K
1.403
MAX.
+.005
–.000
.717
M
N
Z
MAX.
K
1.931
MAX.
+.005
–.000
.717
M
*
*
Plug movement required to clear FLJT receptacles: .625 min.
Shell
Size
K
Dia.
+.001
–.006
M
+.000
–.006
N
Dia.
+.001
–.005
R
(TP)
S
+.011
–.010
T
Dia.
±.005
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 22
Contact
Z Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts Z
Max.
9 .436 .632 .572 .719 .938 .128 .865 .950 .820 1.324 1.394
11 .560 .632 .700 .812 1.031 .128 .865 .950 .820 1.324 1.394
13 .686 .632 .850 .906 1.125 .128 .865 .950 .820 1.324 1.394
15 .810 .632 .975 .969 1.219 .128 .865 .950 .820 1.324 1.394
17 .936 .632 1.100 1.062 1.312 .128 .865 .950 .820 1.324 1.394
19 1.060 .632 1.207 1.156 1.438 .128 .865 .950 .820 1.324 1.394
21 1.186 .602 1.332 1.250 1.562 .128 .865 .950 .820 1.324 1.394
23 1.310 .602 1.457 1.375 1.688 .147 .865 .950 .820 1.324 1.394
25 1.436 .602 1.582 1.500 1.812 .147 .865 .950 .820 1.324 1.394
All dimensions for reference only.
21-29X2
21-40X2
21-36X2
FLJT – MIL-DTL-38999, Series I
Box Mounting Receptacle - Aluminum
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-29X2
21-40X2
21-36X2
Commercial
48 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
R
S R
T
4 HOLES
.005 M
N K
Z
MAX.
P*
P*
M
1.403
MAX.
+.005
–.000
.905
N
.921 +.005
–.000
1.021 +.006
–.000 1.921
MAX.
DK1
.100
MAX.
Plug movement required to clear FLJT receptacles: .625 min.
* Acceptable panel thickness for back panel mounting a standard receptacle.
Shell
Size
D
Dia.
±.005
K
Dia.
+.000
–.006
K1
Dia.
+.000
–.007
M
+.000
–.006
N
Dia.
+.001
–.005
P
Max.
Panel
Thickness
R
(TP)
S
+.011
–.010
T
Dia.
±.005
SHORT SHELL
VHF/UHF Filters
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 22
Contact
Z Max.
9 .299 .437 .561 .820 .572 .234 .719 .938 .128 .672 .763 .632
11 .427 .562 .687 .820 .700 .234 .812 1.031 .128 .672 .763 .632
13 .541 .688 .811 .820 .850 .234 .906 1.125 .128 .672 .763 .632
15 .666 .812 .937 .820 .975 .234 .969 1.219 .128 .672 .763 .632
17 .791 .938 1.061 .820 1.100 .234 1.062 1.312 .128 .672 .763 .632
19 .897 1.062 1.187 .820 1.207 .234 1.156 1.438 .128 .672 .763 .632
21 1.022 1.188 1.312 .790 1.332 .204 1.250 1.562 .128 .672 .763 .632
23 1.147 1.312 1.437 .790 1.457 .204 1.375 1.688 .147 .672 .763 .632
25 1.272 1.438 1.562 .790 1.582 .193 1.500 1.812 .147 .672 .763 .632
All dimensions for reference only.
21-47X2
21-48X2
UTS (Crimp)
Contact
SAE AS39029
FLJTP – MIL-DTL-38999, Series I
Box Mount Receptacle - Aluminum (Back Panel Mounting, UTS Crimp)
ALUMINUM
21-47X2
21-48X2
PART NUMBER BUILDER Page G23-25
Commercial
49
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
45°
W
(4) CORROSION RESISTANT STEEL
HELICAL COIL WITH LOCKING THREADS
.112-40 UNC-3B INSERTS
.005 M
G
M
.154
±.020
.905+.006
–.000
NSEE
NOTE 1
*
RS
R
S
T
4 HOLES
.005 M
Shell
Size
G
+.006
–.005
M
+.000
–.005
N
Dia.
+.001
–.005
R
(TP)
S
+.011
–.010
T
Dia.
+.004
–.003 W
11 .689 .820 .700 .812 1.031 .128 .850
13 .689 .820 .850 .906 1.125 .128 .994
15 .689 .820 .975 .969 1.219 .128 1.119
17 .689 .820 1.100 1.062 1.312 .128 1.237
19 .689 .820 1.207 1.156 1.438 .128 1.379
21 .689 .790 1.332 1.250 1.562 .128 1.489
23 .719 .790 1.457 1.375 1.688 .147 1.619
25 .719 .790 1.582 1.500 1.812 .147 1.744
All dimensions for reference only.
FLJT – MIL-DTL-38999, Series I
Box Mounting Receptacle - Aluminum (Printed Circuit Board Mount)
21-57X2
Plug movement required to clear FLJT receptacles: .625 min.
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Please consult Amphenol Aerospace for additional lengths.
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-57X2
Commercial
50 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
2 PLACES
H
HEX
C
A
T
V THREAD
R THREAD
1.403
MAX.
.044 DIA. MIN.
3 LOCKWIRE HOLES
.915 ±.005
N
PANEL THICKNESS
.062 -.125
Z MAX
.044 DIA. MIN.
3 LOCKWIRE HOLES
.915 ±.005 PANEL THICKNESS
.062 -.125
Z MAX.
R THREAD
N
V THREAD
1.931
MAX.
*
*
Shell
Size
A
Flat
+.000
–.010
C
Dia.
+.011
–.010
H
Hex
+.017
–.016
N
Dia
+.001
–.005
R
Thread
(Plated)
Class -2A
S
+.016
–.015
T
Dia.
+.010
–.000
V
Thread
UNEF-2A
(Plated)
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 22
Contact
Z Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
9 .669 1.188 .875 .572 .6875-24UNEF 1.062 .697 .4375-28 .667 .756 .616 1.228 1.201
11 .769 1.375 1.000 .700 .8125-20UNEF 1.250 .822 .5625-24 .667 .756 .616 1.228 1.201
13 .955 1.500 1.188 .850 1.0000-20UNEF 1.375 1.007 .6875-24 .667 .756 .616 1.228 1.201
15 1.084 1.625 1.312 .975 1.1250-18UNEF 1.500 1.134 .8125-20 .667 .756 .616 1.228 1.201
17 1.208 1.750 1.438 1.100 1.2500-18UNEF 1.625 1.259 .9375-20 .667 .756 .616 1.228 1.201
19 1.333 1.938 1.562 1.207 1.3750-18UNEF 1.812 1.384 1.0625-18 .667 .756 .616 1.228 1.201
21 1.459 2.062 1.688 1.332 1.5000-18UNEF 1.938 1.507 1.1875-18 .667 .756 .616 1.228 1.201
23 1.580 2.188 1.812 1.457 1.6250-18UNEF 2.062 1.634 1.3125-18 .667 .756 .616 1.228 1.201
25 1.709 2.312 2.000 1.582 1.7500-18UNS 2.188 1.759 1.4375-18 .667 .756 .616 1.228 1.201
All dimensions for reference only.
21-29X7
21-40X7
21-36X7
FLJT – MIL-DTL-38999, Series I
Jam Nut Receptacle - Aluminum
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
“D” shaped mounting hole dimensions. Plug movement required to clear FLJT receptacles: .625 min.
ALUMINUM
21-29X7
21-40X7
21-36X7
PART NUMBER BUILDER Page G23-25
Commercial
51
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
2 PLACES
H
HEX
C
A
T
PANEL THICKNESS
.062 -.125
N
1.922
MAX.
G
R THREAD V THREAD
D
.100 MAX.
+.005
–.000
.921
“D” shaped mounting hole dimensions
Plug movement required to clear FLJT receptacles: .625 min.
Shell
Size
A
Flat
+.000
–.010
C
Dia.
+.011
–.010
D
Dia.
±.005
G
+.006
–.005
H
Hex
+.017
–.016
N
Dia
+.001
–.005
R
Thread
(Plated)
Class -2A
S
+.016
–.015
T
Dia.
+.010
–.000
V
Thread
UNEF-2A
(Plated)
9 .669 1.188 .299 1.030 .875 .572 .6875-24UNEF 1.062 .697 .5625-24
11 .769 1.375 .427 1.030 1.000 .700 .8125-20UNEF 1.250 .822 .6875-24
13 .955 1.500 .541 1.030 1.188 .850 1.0000-20UNEF 1.375 1.007 .8125-20
15 1.084 1.625 .666 1.030 1.312 .975 1.1250-18UNEF 1.500 1.134 .9375-20
17 1.208 1.750 .791 1.030 1.438 1.100 1.2500-18UNEF 1.625 1.259 1.0625-18
19 1.333 1.938 .897 1.061 1.562 1.207 1.3750-18UNEF 1.812 1.384 1.1875-18
21 1.459 2.062 1.022 1.061 1.688 1.332 1.5000-18UNEF 1.938 1.507 1.3125-18
23 1.580 2.188 1.147 1.061 1.812 1.457 1.6250-18UNEF 2.062 1.634 1.4375-18
25 1.709 2.312 1.272 1.061 2.000 1.582 1.7500-18UNS 2.188 1.759 1.5625-18
All dimensions for reference only.
21-48X7
UTS (Crimp) Contact
SAE AS39029/57
FLJTPQ – MIL-DTL-38999, Series I
Jam Nut Receptacle - Aluminum (UTS Crimp)
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-48X7
Commercial
52 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
W
45°
SEE NOTE 1
1.183
±.005
.110
.326 ±.002
S
RR THREAD
SPANNER NUT
RR THREAD
SPANNER NUT
.075 MAX.
BULKHEAD
.125
±.005
B
2 PLACES
+.000
–.010
.932
SEE NOTE 1
.836
±.005
.110
.326 ±.002
S
.575 ±.010
.673 ±.002
*
*
.075 MAX.
BULKHEAD
.125
±.005
B
2 PLACES
N
N
(4) CORROSION
RESISTANT STEEL
HELICAL COIL WITH
LOCKING THREADS
.112-40 UNC-3B INSERTS
.005 M
Shell
Size
B
Dia.
±.005
N Dia.
+.001
–.005
S
±.020 W
RR
Thread
UNEF-2A
11 1.062 .700 .132 .850 .8125-20
13 1.250 .850 .132 .994 1.0000-20
15 1.375 .975 .132 1.119 1.1250-20
17 1.500 1.100 .132 1.237 1.2500-18
19 1.625 1.207 .132 1.379 1.3750-18
21 1.750 1.332 .132 1.489 1.5000-18
23 1.875 1.457 .132 1.619 1.6250-18
25 2.000 1.582 .132 1.744 1.7500-18
All dimensions for reference only.
21-57X7
21-57X4
FLJT – MIL-DTL-38999, Series I
Jam Mounting Receptacle - Aluminum (Printed Circuit Board Mount)
Plug movement required to clear FLJT receptacles: .625 min.
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Please consult Amphenol Aerospace for additional lengths.
ALUMINUM
21-57X4
21-57X7
PART NUMBER BUILDER Page G23-25
Commercial
53
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
2 PLACES
H
HEX
C
A
T
M
Z MIN.
N
.044 DIA. MIN.
3 LOCKWIRE HOLES
PANEL THICKNESS
.062 to .603 Sizes 9-19
.062 to 572 Sizes 21-25
R THREAD
1.686
MAX.
*
Shell
Size
A
Flat
+.000
–.010
C
Dia.
+.011
–.010
H
Hex
+.017
–.016
M
±.005
N
Dia
+.001
–.005
R
Thread
(Plated)
Class -2A
S
+.016
–.015
T
Dia.
+.010
–.000
SHORT SHELL
VHF/UHF Filters
Size 16
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
Size 20
Contact
Z Max.
Size 22
Contact
Z Max.
9 .669 1.188 .875 1.557 .572 .6875-24UNEF 1.062 .697 .000 .000 .000 .000
11 .769 1.375 1.000 1.557 .700 .8125-20UNEF 1.250 .822 .000 .000 .000 .000
13 .955 1.500 1.188 1.557 .850 1.0000-20UNEF 1.375 1.007 .000 .000 .000 .000
15 1.084 1.625 1.312 1.557 .975 1.1250-18UNEF 1.500 1.134 .000 .000 .000 .000
17 1.208 1.750 1.438 1.557 1.100 1.2500-18UNEF 1.625 1.259 .000 .000 .000 .000
19 1.333 1.938 1.562 1.557 1.207 1.3750-18UNEF 1.812 1.384 .000 .000 .000 .000
21 1.459 2.062 1.688 1.525 1.332 1.5000-18UNEF 1.938 1.507 .000 .000 .000 .000
23 1.580 2.188 1.812 1.525 1.457 1.6250-18UNEF 2.062 1.634 .000 .000 .000 .000
25 1.709 2.312 2.000 1.525 1.582 1.7500-18UNS 2.188 1.759 .000 .000 .000 .000
All dimensions for reference only.
FLJT – MIL-DTL-38999, Series I
Jam Nut Receptacle - Aluminum (Minimum Penetration)
21-29X4
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
“D” shaped mounting hole dimensions.
Plug movement required to clear FLJT receptacles: .625 min.
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-29X4
Commercial
54 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
The Amphenol® FSJT Series combines the unique design
features of the scoop-proof FLJT Series with the standard
mounting dimensions of JT types.
100% scoop-proof design
Standard mounting dimensions
Compliance with European Specications PAN6433-2,
LN29729, VG96912
Uses proven lter technology with available components
from other series
EMP protection versions available
FSJT Master Key/Keyway Rotation
Shell
Size
AB Angle of Rotation (Degrees)
Normal A B C D
895
10 95 81 67 123 109
12 95 75 63 127 115
14 95 74 61 129 116
16 95 77 65 125 113
18 95 77 65 125 113
20 95 77 65 125 113
22 95 80 69 121 110
24 95 80 69 121 110
A plug with a given rotation letter will mate with a receptacle
with the same rotation letter. The AB angle for a given
connector is the same whether it contains pins or sockets.
Inserts are not rotated in conjunc tion with the master key/
keyway.
AB angles shown are viewed from the front face of the
connector. A receptacle is shown at right. The angles for the
plug are exactly the same, except the direction of rotation is
opposite of that shown for the receptacle.
FSJT – MIL-DTL-38999 Type
Circular Filter Connectors - Features, Alternate Rotations
FSJT
Rotations
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of receptacle shown)
ROTATION
LETTERS
NORMAL
BADC
AB
5˚ REF
55
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
R
R
S
S
T DIA.
4 HOLES
.005 M
1.506 MAX.
.717
+.006
–.000
N
M
V THREAD
Z
.312
MIN. FULL THREAD
*
Shell
Size
M
+.000
–.005
N
Dia.
+.001
–.005
R
(TP)
S
+.021
–.020
T
Dia.
+.004
–.003
V
Thread
UNEF-2A
Z Max.
Size 20
Contact
Size 16 or 16 &
20 Contacts
Size 22
Contact
10 .632 .590 .719 .938 .120 .5625-24 .165 .265 .134
12 .632 .750 .812 1.031 .120 .6875-24 .165 .265 .134
14 .632 .875 .906 1.125 .120 .8125-20 .165 .265 .134
16 .632 1.000 .969 1.219 .120 .9375-20 .165 .265 .134
18 .632 1.125 1.062 1.312 .120 1.0625-18 .165 .265 .134
20 .602 1.250 1.156 1.438 .120 1.1875-18 .165 .265 .134
22 .602 1.375 1.250 1.562 .120 1.3125-18 .165 .265 .134
24 .602 1.500 1.375 1.688 .147 1.4375-18 .165 .265 .134
All dimensions for reference only.
FSJT – MIL-DTL-38999 Type
Wall Mounting Receptacle - Aluminum
21-63X0
*Note 1. Standard Printed
Circuit Termination diameter
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
Plug movement required to clear FSJT receptacles: .625 min.
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-63X0
Commercial
56 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
R
R
S
S
.005 M
T DIA.
4 HOLES
N
1.922
MAX.
.717
+.006
–.000
V THREAD
.100 MAX.
D
M.312
MIN. FULL THREAD
Plug movement required to clear FSJT receptacles: .625 min.
Shell
Size
D
Dia.
±.005
M
+.000
–.005
N
Dia.
+.001
–.005
R
(TP)
S
+.021
–.020
T
Dia.
+.004
–.003
V
Thread
UNEF-2A
10 .427 .632 .590 .719 .938 .120 .6875-24
12 .541 .632 .750 .812 1.031 .120 .8125-20
14 .666 .632 .875 .906 1.125 .120 .9375-20
16 .791 .632 1.000 .969 1.219 .120 1.0625-18
18 .897 .632 1.125 1.062 1.312 .120 1.1875-18
20 1.022 .602 1.250 1.156 1.438 .120 1.3125-18
22 1.147 .602 1.375 1.250 1.562 .120 1.4375-18
24 1.272 .602 1.500 1.375 1.688 .147 1.5625-18
21-65X0
UTS (Crimp) Contact
SAE AS39029/57
R
R
S
S
.005 M
T DIA.
4 HOLES
EE
Z
N
M
1.506 MAX
.717
+.006
–.000
*
Plug movement required to clear FSJT receptacles: .625 min.
Shell
Size
M
+.000
–.005
N
Dia.
+.001
–.005
R
(TP)
S
+.021
–.020
T
Dia.
+.004
–.003
EE
+.001
–.005
Z Max.
Size 16
Contact
Size 20
Contact
Size 16 or
16 & 20
Contacts
Size 22
Contact
10 .632 .590 .719 .938 .120 .562 .265 .165 .265 .134
12 .632 .750 .812 1.031 .120 .687 .265 .165 .265 .134
14 .632 .875 .906 1.125 .120 .812 .265 .165 .265 .134
16 .632 1.000 .969 1.219 .120 .937 .265 .165 .265 .134
18 .632 1.125 1.062 1.312 .120 1.062 .265 .165 .265 .134
20 .602 1.250 1.156 1.438 .120 1.187 .265 .165 .265 .134
22 .602 1.375 1.250 1.562 .120 1.312 .265 .165 .265 .134
24 .602 1.500 1.375 1.688 .147 1.437 .265 .165 .265 .134
All dimensions for reference only.
21-63X2
FSJT – MIL-DTL-38999 Type
Wall Mounting Receptacle (UTS crimp)- Aluminum
FSJT - MIL-DTL-38999 Type
Box Mounting
Receptacle - Aluminum
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact
termination is Solder Cup
Please consult.
Amphenol Aerospace for
additional lengths.
ALUMINUM
21-65X0
21-63X2 BELOW
PART NUMBER BUILDER Page G23-25
Commercial
57
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
R
R
S
S
.005 M
T DIA.
4 HOLES
N
.717
+.006
–.000
M
1.922 MAX.
DEE
.100 MAX.
Plug movement required to clear FSJT receptacles: .625 min.
Shell
Size
D
Dia.
±.005
M
+.000
–.005
N
Dia.
+.001
–.005
R
(TP)
S
+.021
–.020
T
Dia.
+.004
–.003
EE
Dia.
+.001
–.005
10 .427 .632 .590 .719 .938 .120 .687
12 .541 .632 .750 .812 1.031 .120 .811
14 .666 .632 .875 .906 1.125 .120 .937
16 .791 .632 1.000 .969 1.219 .120 1.061
18 .897 .632 1.125 1.062 1.312 .120 1.187
20 1.022 .602 1.250 1.156 1.438 .120 1.312
22 1.147 .602 1.375 1.250 1.562 .120 1.437
24 1.272 .602 1.500 1.375 1.688 .147 1.562
P
S
2 PLACES
GG
T
RR THREAD V THREAD
Z
K
1.506
MAX.
N
.915
+.006
–.005
BB *
“D” shaped mounting hole dimensions
Plug movement required to clear
FSJT receptacles: .625 min.
Shell
Size
K
+.006
–.005
N
Dia.
+.001
–.005
P
Hex
S
±.016
T
+.010
–.000
V
Thread
UNEF
Class 2A
Z
±.020
BB
+.000
–.010
GG
Max.
RR
Thread
UNEF
Class 2A
SS
+.001
–.016
10 1.024 .590 .875 1.062 .697 .5625-24 .150 .669 1.203 .6875-24 .680
12 1.024 .750 1.062 1.250 .884 .6875-24 .150 .830 1.391 .8750-20 .859
14 1.024 .875 1.188 1.375 1.007 .8125-20 .150 .955 1.515 1.0000-20 .984
16 1.024 1.000 1.312 1.500 1.134 .9375-20 .150 1.084 1.641 1.1250-18 1.108
18 1.055 1.125 1.438 1.625 1.259 1.0625-18 .150 1.208 1.766 1.2500-18 1.233
20 1.055 1.250 1.562 1.812 1.384 1.1875-18 .150 1.333 1.953 1.3750-18 1.358
22 1.055 1.375 1.688 1.938 1.507 1.3125-18 .150 1.459 2.078 1.5000-18 1.483
21-63X7
FSJT – MIL-DTL-38999
Box Mounting Receptacle (UTS crimp) - Aluminum
FSJT MIL-DTL-38999
Jam Nut Receptacle - Aluminum
21-65X2
UTS (Crimp) Contact
SAE AS39029/57
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-65X2
21-63X7 BELOW
Commercial
58 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
FBL MIL-DTL-38999, Series IV
Circular Filter Connectors
Features, Alernate Rotations
Components designed to meet the severe mechanical and environmental
requirements of MIL-DTL-38999 Series III are now available to Series IV
users. Modications of the con nector are available with EMP protection,
incorporating MOV’s, diodes or a combination of both.
Intermateable with MIL-DTL-38999 Series IV plugs
Maintains all the features of standard MIL-DTL-38999
Series IV receptacles
Scoop-proof pins provide contact protection
Uses insert patterns from MIL-DTL-38999 Series III
Rotations
or
T
1
T
2
PP˚
XX˚
QQ˚
RELATIVE POSSIBLE POSITION
OF KEYWAYS
(front face of receptacle shown)
RR˚
YY˚
SS˚
FBL
POLARITY DIMENSIONS
Key and Keyway
Arrangement XX° YY°
N 110° 250°
A 100° 260°
B 90° 270°
C 80° 280°
D 70° 290°
K 120° 255°
FBL MASTER KEY/KEYWAY ROTATION
Shell
Size
Receptacle Key Position
Main Key
Receptacle/Basic
PP° QQ° RR° SS°
Socket
Contact T1
Pin Contact
T2
11 44°28’ 151°6’ 208°54’ 315°32’ .075 .109
13 44°25’ 150°31’ 209°29’ 315°35’ .076 .112
15 44°33’ 150°24’ 209°36’ 315°27’ .096 .132
17 44°36’ 150°22’ 209°38’ 315°24’ .096 .134
19 44°33’ 150°27’ 209°33’ 315°27’ .117 .154
21 44°34’ 150°23’ 209°37’ 315°26’ .118 .155
23 44°34’ 150°20’ 209°40’ 315°26’ .138 .176
25 44°42’ 150°22’ 209°48’ 315°18’ .139 .177
59
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
SR
S
RT DIA.
4 HOLES
.005 M
1.425 MAX.
MK
Z
VV
1.425 MAX.
MK
Z
VV
EE
*
*
V THREAD
Shell
Size
K
±.010
M
±.020
R
(TP)
S
+.021
–.020
T
Dia.
+.004
–.003
V
Thread
(Plated)
–.006
EE
Dia.
+.001
–.005
VV
±.003
Z Max.
Size 16
Contact
Size 20
Contact
Size 16 or
16 & 20
Contacts
Size 22
Contact
11 .092 .791 .812 1.029 .128 M15X1-6g0.100R .589 .672 .265 .165 .265 .134
13 .092 .791 .906 1.124 .128 M18X1-6g0.100R .707 .672 .265 .165 .265 .134
15 .092 .791 .969 1.218 .128 M22X1-6g0.100R .865 .672 .265 .165 .265 .134
17 .092 .791 1.062 1.313 .128 M25X1-6g0.100R .983 .672 .265 .165 .265 .134
19 .092 .791 1.156 1.439 .128 M28X1-6g0.100R 1.101 .662 .265 .165 .265 .134
21 .124 .791 1.250 1.561 .128 M31X1-6g0.100R 1.219 .662 .265 .165 .265 .134
23 .124 .791 1.375 1.687 .147 M34X1-6g0.100R 1.337 .662 .265 .165 .265 .134
25 .124 .791 1.500 1.813 .147 M37X1-6g0.100R 1.455 .662 .265 .165 .265 .134
BOX MOUNT
21-61X2XX-XXX
FBL – MIL-DTL-38999, Series IV
Box and Wall Mounting Receptacle
WALL MOUNT
21-61X0XX-XXX
All dimensions for reference only.
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact termination is
Solder Cup.
Please consult Amphenol
Aerospace for additional lengths.
PART NUMBER BUILDER Page G23-25
21-61X2
21-61X0
Commercial
60 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
R
S
RS
T DIA.
4 HOLES
.005 M
1.950 MAX.
K
VV .100 MAX.
DEE
GROMMET
GROMMET
V THREAD
M
1.950 MAX.
K
VV .100 MAX.
DEE
M
Shell
Size
D
Dia.
±.005
K
±.010
M
±.020
R
(TP)
S
+.021
–.020
T
Dia.
+.004
–.003
V
Thread
(Plated)
–.006
EE
Dia.
+.001
–.005
VV
±.003
11 .427 .092 .791 .812 1.029 .128 M18X1-6g0.100R .687 .672
13 .541 .092 .791 .906 1.124 .128 M22X1-6g0.100R .811 .672
15 .666 .092 .791 .969 1.218 .128 M25X1-6g0.100R .937 .672
17 .791 .092 ,791 1.062 1.313 .128 M28X1-6g0.100R 1.061 .672
19 .897 .092 .791 1.156 1.439 .128 M31X1-6g0.100R 1.187 .662
21 1.022 .124 .791 1.250 1.561 .128 M34X1-6g0.100R 1.312 .662
23 1.147 .124 .791 1.375 1.687 .147 M37X1-6g0.100R 1.437 .662
25 1.272 .124 .791 1.500 1.813 .147 M41X1-6g0.100R 1.562 .662
BOX MOUNT
21-64X2XX-XXX
UTS (Crimp) Contact
MIL-C-39029/57
FBL – MIL-DTL-38999 Series IV
Box and Wall Mounting Receptacle (UTS Crimp)
R
S
RS
T DIA.
4 HOLES
.005 M
1.950 MAX.
K
VV .100 MAX.
DEE
GROMMET
GROMMET
V THREAD
M
1.950 MAX.
K
VV .100 MAX.
DEE
M
WALL MOUNT
21-64X0XX-XXX
UTS (Crimp) Contact
MIL-C-39029/57
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
21-64X2
21-64X0
PART NUMBER BUILDER Page G23-25
Commercial
61
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
FPT – MIL-DTL-26482 Series
Circular Filter Connectors Features, Alternate Rotations
The Amphenol® FPT Series combines the unique design features of
the miniature PT Series with an EMI lter.
Intermateable with MIL-DTL-26482 Series connectors; see
Matrix 26482, Series 2 at www.amphenol-aerospace.com or
Catalog MIL-DTL-26482, Series 1.
Quick positive coupling with visual conrmation of mating
Higher reliability and greater durability with permanently
encapsulated contacts
Aluminum shells with several nish options
FPT
FPT Alternate Positions
Insert
Arrangements
Degrees
W X Y Z
10-5 45 151 180 270
10-6 90
10-98 90 180 240 270
12-3 180
12-8 90 112 203 292
12-10 60 155 270 295
12-98 61 135 189 340
14-12 434 90
14-18 15 90 180 270
14-19 30 165 315
16-8 54 152 180 331
16-26 60 275 338
18-32 85 138 222 265
20-41 45 126 225
22-41 39
22-55 30 142 226 314
24-61 90 180 270 324
Rotations
A
B
Master Keyway
POSITION W
Master Keyway
POSITION X
Master Keyway
POSITION Y
Master Keyway
POSITION Z
Views looking into front face of pin insert
or rear of socket insert.
A
B
A
B
B
A
62 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
SR
S
R
T DIA.
4 HOLES
.005 M
Z MAX.
N
L
MAX.
M
J
V THREAD
M
J
Z
MAX.
N
V THREAD
P*
P*
L
MAX.
1
*
*
FPT - MIL-DTL-26482
Wall Mounting Receptacle
Plug movement required to clear FPT receptacles: .438 min. * Acceptable panel thickness for back panel mounting a standard receptacle.
Shell
Size
J
+.021
–.010
M
+.010
–.000
N
Dia
+.001
–.005
P*
Max.
R
(TP)
S
+.011
–.010
T
Dia.
±.005
V
Thread
UNEF-2A
(Plated)
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
L
Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
L1
Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
8 .493 .431 .473 .087 .594 .812 .120 .4375-28 1.103 .850 .904 1.588 1.258 1.328
10 .493 .431 .590 .087 .719 .938 .120 .5625-24 1.103 .850 .904 1.588 1.258 1.328
12 .493 .431 .750 .087 .812 1.031 .120 .6875-24 1.103 .850 .904 1.588 1.258 1.328
14 .493 .431 .875 .087 .906 1.125 .120 .8125-20 1.103 .850 .904 1.588 1.258 1.328
16 .493 .431 1.000 .087 .969 1.219 .120 .9375-20 1.103 .850 .904 1.588 1.258 1.328
18 .493 .431 1.125 .087 1.062 1.312 .120 1.0625-18 1.103 .850 .904 1.588 1.258 1.328
20 .650 .556 1.250 .212 1.156 1.438 .120 1.1875-18 1.166 .755 .809 1.651 1.163 1.233
22 .650 .556 1.375 .212 1.250 1.562 .120 1.3125-18 1.166 .755 .809 1.651 1.163 1.233
24 .683 .589 1.500 .212 1.375 1.688 .147 1.4375-18 1.166 .722 .776 1.651 1.130 1.200
All dimensions for reference only.
21-20X0XX-XXX
21-31X0XX-XXX
21-33X0XX-XXX
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
ALUMINUM
21-20X0
21-31X0
21-33X0
PART NUMBER BUILDER Page G23-25
Commercial
63
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
RS
T DIA.
4 HOLES
.005
S
R
M
Z MAX.
K
N
M
J
L
MAX.
P
*
Z
MAX.
K
N
M
J
L
MAX.
1
*
P
*
*
FPT - MIL-DTL-26482
Box Mounting Receptacle
Plug movement required to clear FPT receptacles: .438 min. Acceptable panel thickness for back panel mounting a standard receptacle.
Shell
Size
J
+.021
–.010
K
Dia.
+.011
–.000
M
+.010
–.000
N
Dia
+.001
–.005
P*
Max.
R
(TP)
S
+.011
–.010
T
Dia.
±.005
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
L
Max.
Size 20
Contact
Z Max.
Size 16
or
16 & 20
Contacts
Z Max.
L1
Max.
Size 20
Contact
Z Max.
Size 16
or
16 & 20
Contacts
Z Max.
8 .493 .438 .431 .473 .087 .594 .812 .120 1.103 .850 .904 1.588 1.258 1.328
10 .493 .562 .431 .590 .087 .719 .938 .120 1.103 .850 .904 1.588 1.258 1.328
12 .493 .688 .431 .750 .087 .812 1.031 .120 1.103 .850 .904 1.588 1.258 1.328
14 .493 .812 .431 .875 .087 .906 1.125 .120 1.103 .850 .904 1.588 1.258 1.328
16 .493 .938 .431 1.000 .087 .969 1.219 .120 1.103 .850 .904 1.588 1.258 1.328
18 .493 1.062 .431 1.125 .087 1.062 1.312 .120 1.103 .850 .904 1.588 1.258 1.328
20 .650 1.188 .556 1.250 .212 1.156 1.438 .120 1.166 .755 .809 1.651 1.163 1.233
All dimensions for reference only.
21-20X2XX-XXX
21-31X2XX-XXX
21-33X2XX-XXX
Contact size
(AWG) ±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-20X2
21-31X2
21-33X2
Commercial
64 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
S
2 PLACES
H
HEX
C
A
T
3 LOCKWIRE HOLES
.059 DIA. MIN.
PANEL THICKNESS
.062 -.125
K
N
Y
THREAD M
J
L
Z MAX.
3 LOCKWIRE HOLES
.059 DIA. MIN.
PANEL THICKNESS
.062 -.125
K
N
Y
THREAD M
J
L
MAX.
Z MAX.
1
*
*
FPT
Jam Nut Receptacle
Shell
Size
A
Flat
+.000
–.010
C
Dia.
+.011
–.010
H
Hex
+.017
–.016
J
+.006
–.005
K
Dia.
+.011
–.000
M
±.005
N
Dia
+.001
–.005
S
±.010
T
Dia.
+.010
–.000
Y
Thread
UNEF-2A
(Plated)
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
L
Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
L1
Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
8 .542 1.062 .750 .821 .438 .696 .473 .938 .572 .5625-24 1.103 .642 .698 1.588 1.050 1.120
10 .669 1.188 .875 .821 .562 .696 .590 1.062 .697 .6875-24 1.103 .642 .698 1.588 1.050 1.120
12 .830 1.375 1.062 .821 .688 .696 .750 1.250 .884 .8750-20 1.103 .642 .698 1.588 1.050 1.120
14 .955 1.500 1.188 .821 .812 .696 .875 1.375 1.009 1.0000-20 1.103 .642 .698 1.588 1.050 1.120
16 1.084 1.625 1.312 .821 .938 .696 1.000 1.500 1.134 1.1250-18 1.103 .642 .698 1.588 1.050 1.120
18 1.208 1.750 1.438 .821 1.062 .696 1.125 1.625 1.259 1.2500-18 1.103 .642 .698 1.588 1.050 1.120
20 1.333 1.938 1.562 1.040 1.188 .884 1.250 1.812 1.384 1.3750-18 1.166 .516 .570 1.651 .924 .994
22 1.459 2.062 1.688 1.040 1.312 .884 1.375 1.938 1.509 1.5000-18 1.166 .516 .570 1.651 .924 .994
24 1.575 2.188 1.812 1.073 1.438 .917 1.500 2.062 1.634 1.6250-18 1.166 .483 .537 1.651 .891 .961
All dimensions for reference only.
21-20X7XX-XXX
21-31X7XX-XXX
21-33X7XX-XXX
Contact size
(AWG) ±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
“D” shaped mounting hole dimensions. Plug movement required to clear FPT receptacles: .438 min.
S
2 PLACES
H
HEX
C
A
T
3 LOCKWIRE HOLES
.059 DIA. MIN.
PANEL THICKNESS
.062 -.125
K
N
Y
THREAD M
J
L
Z MAX.
3 LOCKWIRE HOLES
.059 DIA. MIN.
PANEL THICKNESS
.062 -.125
K
N
Y
THREAD M
J
L
MAX.
Z MAX.
1
*
*
ALUMINUM
21-20X7
21-31X7
21-33X7
PART NUMBER BUILDER Page G23-25
Commercial
65
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Shell
Size
A
Flat
+.000
–.010
C
Dia.
+.011
–.010
H
Hex
+.017
–.016
J
+.006
–.005
K
Dia.
+.011
–.000
M
±.005
N
Dia
+.001
–.005
S
±.010
T
Dia.
+.010
–.000
Y
Thread
UNEF-2A
(Plated)
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
L
Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
L1
Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
8 .542 1.062 .750 .821 .438 .696 .473 .938 .572 .5625-24 1.103 .642 .698 1.588 1.050 1.120
10 .669 1.188 .875 .821 .562 .696 .590 1.062 .697 .6875-24 1.103 .642 .698 1.588 1.050 1.120
12 .830 1.375 1.062 .821 .688 .696 .750 1.250 .884 .8750-20 1.103 .642 .698 1.588 1.050 1.120
14 .955 1.500 1.188 .821 .812 .696 .875 1.375 1.009 1.0000-20 1.103 .642 .698 1.588 1.050 1.120
16 1.084 1.625 1.312 .821 .938 .696 1.000 1.500 1.134 1.1250-18 1.103 .642 .698 1.588 1.050 1.120
18 1.208 1.750 1.438 .821 1.062 .696 1.125 1.625 1.259 1.2500-18 1.103 .642 .698 1.588 1.050 1.120
20 1.333 1.938 1.562 1.040 1.188 .884 1.250 1.812 1.384 1.3750-18 1.166 .516 .570 1.651 .924 .994
22 1.459 2.062 1.688 1.040 1.312 .884 1.375 1.938 1.509 1.5000-18 1.166 .516 .570 1.651 .924 .994
24 1.575 2.188 1.812 1.073 1.438 .917 1.500 2.062 1.634 1.6250-18 1.166 .483 .537 1.651 .891 .961
N
3 LOCKWIRE HOLES
.059 DIA. MIN.
PANEL THICKNESS
.062 -.572
L
MAX.
Y
THREAD M
Z MIN.
*
*
N
3 LOCKWIRE HOLES
.059 DIA. MIN. PANEL THICKNESS
.062 -1.188
L
Y
THREAD Z MIN.
M
1
MAX
1
S
2 PLACES
H
HEX
C
A
T
FPT
Jam Nut Receptacle (Minimum Penetration)
“D” shaped mounting hole dimensions. Plug movement required to clear FPT receptacles: .438 min.
Shell
Size
A
Flat
+.000
–.010
C
Dia.
+.011
–.010
H
Hex
+.017
–.016
M
+.016
–.015
M1
+.016
–.015
N
Dia
+.001
–.005
S
+.011
–.010
T
Dia.
+.010
–.000
Y
Thread
UNEF-2A
(Plated)
SHORT SHELL
VHF/UHF/MF Filters
LONG SHELL
HF Filters
L
Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
L1
Max.
Size 20
Contact
Z Max.
Size 16 or
16 & 20
Contacts
Z Max.
8 .542 1.062 .750 1.235 1.690 .473 .938 .572 .5625-24 1.366 .022 .029 1.821 .070 .000
10 .669 1.188 .875 1.235 1.690 .590 1.062 .697 .6875-24 1.366 .022 .029 1.821 .070 .000
12 .830 1.375 1.062 1.235 1.690 .750 1.250 .884 .8750-20 1.366 .022 .029 1.821 .070 .000
14 .955 1.500 1.188 1.235 1.690 .875 1.375 1.009 1.0000-20 1.366 .022 .029 1.821 .070 .000
16 1.084 1.625 1.312 1.235 1.690 1.000 1.500 1.134 1.1250-18 1.366 .022 .029 1.821 .070 .000
18 1.208 1.750 1.438 1.235 1.690 1.125 1.625 1.259 1.2500-18 1.366 .022 .029 1.821 .070 .000
20 1.333 1.938 1.562 1.266 1.721 1.250 1.812 1.384 1.3750-18 1.428 .062 .029 1.883 .070 .000
22 1.459 2.062 1.688 1.266 1.721 1.375 1.938 1.509 1.5000-18 1.428 .062 .029 1.883 .070 .000
24 1.575 2.188 1.812 1.266 1.721 1.500 2.062 1.634 1.6250-18 1.428 .062 .029 1.883 .070 .000
All dimensions for reference only.
21-20X4XX-XXX
21-31X4XX-XXX
21-33X4XX-XXX
Contact size
(AWG)
±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-20X4
21-31X4
21-33X4
Commercial
66 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
FPTE
Wall Mounting Receptacle
Plug movement required to clear FPT receptacles: .438 min.
* Acceptable panel thickness for back panel mounting a standard receptacle.
All dimensions for reference only.
RS
T DIA.
4 HOLES
.005
S
R
M
Z MAX.
N
M
J
L
MAX.
P*
*
Shell
Size
J
+.021
–.010
M
+.010
–.000
N
Dia
+.001
–.005
P*
Max.
R
(TP)
S
+.011
–.010
T
Dia.
±.005
SHORT SHELL
VHF/UHF/MF Filters
L
Max.
Size 20
Contact
Z Max.
8 .493 .431 .473 .087 .594 .812 .120 1.409 .774
10 .493 .431 .590 .087 .719 .938 .120 1.409 .774
12 .493 .431 .750 .087 .812 1.031 .120 1.409 .774
14 .493 .431 .875 .087 .906 1.125 .120 1.409 .774
16 .493 .431 1.000 .087 .969 1.219 .120 1.409 .774
18 .493 .431 1.125 .087 1.062 1.312 .120 1.409 .774
20 .650 .556 1.250 .212 1.156 1.438 .120 1.553 .679
22 .650 .556 1.375 .212 1.250 1.562 .120 1.553 .679
24 .683 .589 1.500 .212 1.375 1.688 .147 1.553 .646
21-22X0XX-XXX
Contact size
(AWG) ±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact termination is Solder Cup
Please consult Amphenol Aerospace for additional lengths
ALUMINUM
21-22X0
PART NUMBER BUILDER Page G23-25
Commercial
67
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
N
3 LOCKWIRE HOLES
.059 DIA. MIN.
P
Z MAX.
R THREAD
M
J
L
MAX.
*
S
2 PLACES
H
HEX
C
A
T
“D” shaped mounting hole dimensions. Plug movement required to clear FPT receptacles: .438 min.
Shell
Size
A•
Flat
+.000
–.010
C
Dia.
+.011
–.010
H
Hex
+.017
–.016
J
+.006
–.005
M
±.005
N
Dia.
+.001
–.005
P
Panel
Thickness
R
Thread
UNEF-2A
(Plated)
S
±.010
T•
Dia.
+.010
–.000
SHORT SHELL
VHF/UHF Filters
Max. Min.
L
Max.
Size 20
Contact
Z Max.
8 .542 1.062 .750 .821 .696 .473 .125 .062 .5625-24 .938 .572 1.546 .566
10 .669 1.188 .875 .821 .696 .590 .125 .062 .6875-24 1.062 .697 1.546 .566
12 .830 1.375 1.062 .821 .696 .750 .125 .062 .8750-20 1.250 .884 1.546 .566
14 .955 1.500 1.188 .821 .696 .875 .125 .062 1.0000-20 1.375 1.009 1.546 .566
16 1.084 1.625 1.312 .821 .696 1.000 .125 .062 1.1250-18 1.500 1.134 1.546 .566
18 1.208 1.750 1.438 .821 .696 1.125 .125 .062 1.2500-18 1.625 1.259 1.546 .566
20 1.333 1.938 1.562 1.040 .884 1.250 .250 .062 1.3750-18 1.812 1.384 1.672 .440
22 1.459 2.062 1.688 1.040 .884 1.375 .250 .062 1.5000-18 1.938 1.509 1.672 .440
24 1.575 2.188 1.812 1.073 .917 1.500 .250 .062 1.6250-18 2.062 1.634 1.672 .407
All dimensions for reference only.
FPTE
Jam Nut Receptacle
21-22X7XX-XXX
Contact size
(AWG) ±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact termination is Solder Cup
Please consult Amphenol Aerospace for additional lengths
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-22X7
Commercial
68 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Amphenol FAN Series
Filtered “AN” - Features, Alternate Rotations
The following are additional 5015 insert
arrangements with alternate rotations.
Insert
Arrangement
Degrees
W X Y Z
10SL-4 63
12S-3 70 145 215 290
14S-2 120 240
14S-5 110
14S-7 90 180 270
14S-9 70 145 215 290
16-9 35 110 250 325
16-10 90 180 270
16-11 35 110 250 325
16-13 35 110 250 325
16S-1 80 280
16S-4 35 110 250 325
16S-5 70 145 215 290
16S-6 90 180 270
16S-8 170 265
18-1 70 145 215 290
18-3 35 110 250 325
18-4 35 110 250 325
18-8 70 290
18-10 120 240
18-11 170 265
18-12 80 280
18-15 120 240
18-20 90 180 270
18-22 70 145 215 290
18-29 90 180 270
20-3 70 145 215 290
20-4 45 110 250
20-5 35 110 250 325
20-6 70 145 215 290
Insert
Arrangement
Degrees
W X Y Z
20-15 80 280
20-17 90 180 270
20-18 35 110 250 325
20-19 90 180 270
20-21 35 110 250 325
20-23 35 110 250 325
20-24 35 110 250 325
20-27 35 110 250 325
20-29 80 280
22-1 35 110 250 325
22-2 70 145 215 290
22-4 35 110 250 325
22-5 35 110 250 325
22-8 35 110 250 325
22-9 70 145 215 290
22-10 35 110 250 325
22-11 35 110 250 325
22-13 35 110 250 325
22-20 35 110 250 325
22-22 110 250
22-23 35 250
22-27 80 250 280
22-28 80 280
22-63 20
24-2 80 280
24-9 35 110 250 325
24-10 80 280
24-11 35 110 250 325
24-22 45 110 250
24-27 80 280
28-2 35 110 250 325
28-3 70 145 215 290
28-5 35 110 250 325
28-6 70 145 215 290
Insert
Arrangement
Degrees
W X Y Z
28-7 35 110 250 325
28-12 90 180 270
28-18 70 145 215 290
28-22 70 145 215 290
28-AY 45 110 250
32-2 70 145 215 290
32-5 35 110 250 325
32-7 80 125 235 280
32-8 80 125 235 280
32-15 35 110 250 280
32-17 45 110 250
32-25 60 120
32-48 80
32-64 80 100 110 250
32-68 30
32-82 30
36-3 70 145 215 290
36-4 70 145 215 290
36-5 120 240
36-6 35 110 250 325
36-9 80 125 235 280
36-10 80 125 235 280
36-14 90 180 270
36-15 60 125 245 305
36-AF 65
40-1 65 130 235 300
40-5 33 270
40-9 65 125 225 310
40-10 65 125 225 310
40-35 70 130 230 290
40-AD 45
40-AG 37 74 285 322
40-AP 35 110 250 325
40-AV 90 180 270
* MIL-DTL-5015 supersedes MIL-C-5015.
Rotations
FAN
A
B
Master Keyway
POSITION W
Master Keyway
POSITION X
Master Keyway
POSITION Y
Master Keyway
POSITION Z
Views looking into front face of pin insert
or rear of socket insert.
A
B
A
B
B
A
The “AN” Filter Connector is designed in congurations
intermate able and intermountable with MIL-DTL-5015*
connectors and pro vides electromagnetic interference
protection for critical circuits.
Same dimensions as the non-ltered standard MIL-Spec connectors
with the exception of back shell length. (See Catalog MIL-DTL-5015).
Uses non-removable solder cup terminated contacts.
Shells are impact extruded or machined bar stock aluminum
and are available in several conductive platings.
Applications include power transmission, medical
communications, and ground support equipment.
The following insert arrangements within the 5015 family have
the same alternate insert rotations for W, X, Y and Z, which are:
Degrees
W X Y Z
80 110 250 280
16-7 20-22 22-29 24-17 28-16 32-13
18-5 22-6 22-33 24-20 28-17 32-22
18-9 22-12 22-34 24-21 28-19 32-AF
18-13 22-14 24-1 24-28 28-20 36-1
18-14 22-15 24-3 28-1 28-21 36-7
20-7 22-16 24-4 28-4 32-1 36-8
20-8 22-17 24-5 28-8 32-3 36-13
20-9 22-18 24-6 28-9 32-4 40-AR
20-12 22-19 24-7 28-10 32-6 40-AS
20-14 22-21 24-12 28-11 32-9 40-AT
20-16 22-24 24-14 28-14 32-10 40-AU
20-20 22-25 24-16 28-15 32-12
69
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
2.000 MAX.
K
M
N
B THREAD
T DIA.
4 HOLES
.005 M
R
S
RS
*
FAN (MIL-DTL-5015)
Box Mounting Receptacle
Shell
Size
B Thread
Class 2A
(Plated)
M
+.010
–.000
K
+.020
–.010
N Dia.
+.010
–.000
R
TP
S
±.031
T Dia.
+.004
–.002
8S .5000-28 UNEF .562 .672 .375 .594 .875 .120
10S .6250-24 UNEF .562 .672 .500 .719 1.000 .120
10SL .6250-24 UNEF .562 .672 .625 .719 1.000 .120
12S .7500-20 UNEF .562 .672 .625 .812 1.094 .120
12 .7500-20 UNEF .750 .860 .625 .812 1.094 .120
14S .8750-20 UNEF .562 .672 .750 .906 1.188 .120
14 .8750-20 UNEF .750 .860 .750 .906 1.188 .120
16S 1.0000-20 UNEF .562 .672 .875 .969 1.281 .120
16 1.0000-20 UNEF .750 .860 .875 .969 1.281 .120
18 1.1250-18 UNEF .750 .891 1.000 1.062 1.375 .120
20 1.2500-18 NEF .750 .891 1.125 1.156 1.500 .120
22 1.3750-18 NEF .750 .891 1.250 1.250 1.625 .120
24 1.5000-18 NEF .812 .953 1.375 1.375 1.750 .147
28 1.7500-18 NS .812 .953 1.625 1.562 2.000 .147
32 2.0000-18 NS .875 1.031 1.875 1.750 2.250 .173
36 2.2500-16 UN .875 1.031 2.062 1.983 2.500 .173
21-26X2XX-XXX
Contact size
(AWG) ±.002
22 0.020
20 0.030
16 0.040
12 0.081
*Note 1. Standard Printed
Circuit Termination diameter
Standard contact termination is Solder Cup.
Please consult Amphenol Aerospace for additional lengths.
PART NUMBER BUILDER Page G23-25
ALUMINUM
21-26X2
Commercial
70 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Amphenol Filter Adapters
Circuit Protection for Existing Applications
L
V Thread
C
FTV Adapter
21-900529-XXX
L
NC
FJT Adapter
21-900393-XXX
FJT
Shell
Size
C Dia.
+.011
–.010
N Dia.
+.001
–.005
L
Max.
8 .847 .473 1.397
10 .969 .590 1.397
12 1.143 .750 1.397
14 1.255 .875 1.397
16 1.388 1.000 1.397
18 1.510 1.125 1.397
20 1.633 1.250 1.397
22 1.756 1.375 1.397
24 1.878 1.500 1.397
L
NC
FLJT Adapter
21-900423-XXX
FLJT
Shell
Size
C Dia.
Ref.
N Dia.
+.001
–.005
L
Max.
9 .827 .572 2.038
11 1.949 .700 2.038
13 1.121 .850 2.038
15 1.243 .975 2.038
17 1.378 1.100 2.038
19 1.488 1.207 2.038
21 1.611 1.332 2.038
23 1.733 1.457 2.038
25 1.856 1.582 2.038
All dimensions for reference only.
Consult Amphenol Aerospace for ordering information.
FTV
Shell
Size
C Dia.
Ref.
V Thread
0.1P-0.3L-TS
Class 2A
L
Max.
9 .845 .6250 2.257
11 .950 .7500 2.257
13 1.121 .8750 2.257
15 1.249 1.0000 2.257
17 1.386 1.1875 2.257
19 1.493 1.2500 2.257
21 1.620 1.3750 2.257
23 1.737 1.5000 2.257
25 1.864 1.6250 2.257
L
NC
FPT Adapter
21-900075-XXX
FPT
Shell
Size
C
Dia.
Ref.
N Dia.
+.001
–.005
L
Max.
8 .729 .473 1.626
10 .851 .590 1.626
12 1.035 .750 1.626
14 1.158 .875 1.626
16 1.280 1.000 1.626
18 1.403 1.125 1.626
20 1.525 1.250 1.688
22 1.648 1.375 1.688
24 1.770 1.500 1.688
ADAPTERS
Filter adapters present an effective and economical method of introducing
EMI/EMP protection to an installed system. The adapter series of
lter connectors from Amphenol are available to intermate with
all the popular MIL-Specs.
FEATURES OF THE AMPHENOLADAPTER INCLUDE:
Planar technology from the industry’s leader in circulars
Filter products
MOV or diode capability for transient protection
Wide range of tooled patterns
Space qualied components
Installation of the adapter is quick and efcient, requiring
no tools, xtures or extended downtime. Simply un-mate
the exist ing cable harness from the receptacle; attach the
coupling nut to the receptacle on the unit; then mate the
cable harness to the receptacle side of the adapter.
Several design alternatives are available that will help ensure
that the adapter remains permanently attached to either
the cable harness or the
unit receptacle.
71
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
FEATURES & BENEFITS:
Filter connector size package
Protection for 14, 31, 38 DC voltage circuits
Radiation hardened
No additional circuits required
Low impedance
Increased reliability
Nanosecond response time
Elimination of costly external suppression assemblies
The Amphenol® MOV Connector offers the versatility of a
stan dard connector, with transient protection for sensitive
circuits. Transients in electrical circuits caused by a sudden
release of stored energy can originate within or outside of
the circuit and may be repeatable or random.
Regardless of frequency or origin, transient caused failures
generated by load switching, lightning, electrostatic
discharge (ESD) and electromagnetic pulse (EMP) can
destroy unpro tected IC components.
Compatible with present lter connector assembly
procedures, MOVs can be combined with existing lters.
Internal housing of the MOV offers weight and space
savings over other pro tection methods available today, and
eliminates costly and bulky exterior suppression
mechanisms in appropriate situations. MOVs are presently
available in contact sizes 22, 20 and 16.
Transient protection can be provided in receptacle, plug or
adapter conguration. These connectors are intermateable
and intermountable with the following MIL-Specs:
Transient Protection
MOV– Metal Oxide Varistor Connectors
MOV
MIL-DTL-38999
MIL-DTL-83723
MIL-DTL-5015
MIL-DTL-26482
MIL-DTL-26500
MIL-DTL-27599
72 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
04080 120 160 200 04080 120 160 200
-2
0
2
4
6
8
12A
10
NANOSECONDS
INPUT CURRENT
DATA
Base .1767 A
Peak 9.65 A
-5
0
5
10
15
20
30V
25
NANOSECONDS
OUTPUT VOLTAGE
DATA
Base –.094 V
Peak 29.086 V
NANOSECONDS
INPUT CURRENT
DATA
Peak 24V (Clamping)
Input 2.5A
300
600
900
1200
25
20
15
10
5
050 100 150 200 250 300
OUTPUT VOLTAGE
OUTPUT
INPUT
MOV Connectors
Performance Characteristics
The following charts show the typical MOV response to an input pulse
open circuit of 1000V and 10A peak square wave with a 5 nanosecond
rise time in a 50 Ohm system.
The following chart shows response time and output
voltage of a typical MOV with 1000V, 5 nanosecond,
2.5A input pulse mounted in an LJT 13–35P connector.
Test was performed without load.
NOTE: Continuous voltage ratings are based on 1000 hour reliability assurance tests at 125°C rated ambient temperature per MIL-STD-202 method 108. Contact
Amphenol Sidney for options not listed in chart.
M.O.V. PERFORMANCE CHARACTERISTICS
Designation
Contact
Size
Maximum Rating (125°C) Specications (25°C) Maximum Leakage
Current at Vt (dc)Continuous Transient
Varistor Voltage at 1mA
(DC)
Maximum
Clamping Voltage
Vc at Test Current
lp (8/20µS)
Capacitance
at 1 MHz
DC
Voltage
RMS
Voltage
Energy
(10/1000µS)
Peak
Current
(8/20µS)
IL
Max. IL Max.
Vm
Volts
Vm
Volts Wtm Joules
Itm
Amperes
Min.
Volts
Nominal
Volts
Max.
Volts
Vc
Volts Ip Amps
Picofarads 25°C 125°C
Min. Max. µA µA
F8
22
85.6
1.2 250
12 14 17 28
10
1000 2500 5 5020 1.3 300 10
16 1.5 350 20
F14
22
14 10
1.2 250
18.5 22 25 40
10
800 2000 5 5020 1.5 300 10
16 1.5 350 20
F25
22
25 17
1.3 250
29 33 38 66
10
600 1600 5 50
20 1.7 300 10
16 1.7 350 20
F31
22
31 22
1.5 250
35 39 45 80
5400 1400 5 5020 2 300 10
16 2 350 10 600 1600
F38
22
38 27
1.5 250
42 47 58 90
5200 1000 5 5020 2 300 10
16 2.5 350 10 400 1200
F45
22
45 32
1.5 250
53 59 68 100
5200 850 5 5020 2.5 300 10
16 3 350 10 300 1000
73
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
FEATURES & BENEFITS:
Clamping voltage as low as 11.9 volts
Low capacitance – suitable for high frequency applications
Unipolar or bipolar – using existing proven diode technology
Protection for 5.8 to 60 VDC circuits
No additional circuits required
Low impedance – high frequency response
Increased reliability
Nanosecond response time
Elimination of costly external suppression assemblies
Screening to applicable requirements of
MIL-S-19500TX/TXV available
Keeps transients outside of the box
Minimizes fast transient voltage overshoot
The Amphenol® Diode Connector offers the versatility
of a standard connector, with transient protection for
sensitive cir cuits, such as TTL Lines.
Transients in electrical circuits caused by a sudden release of stored
energy can originate within or outside of the circuit and may be
repeatable or random.
Regardless of frequency or origin, transient caused failures
generated by load switching, lightning, electrostatic discharge (ESD)
and electromagnetic pulse (EMP) can destroy
unpro tected IC components.
Compatible with present lter connector assembly procedures,
diodes can stand alone or can be combined in series with l ters.
Internal housing of the diode offers weight and space sav ings over
other protection methods available today, and eliminates costly and
bulky exterior suppression mechanisms in appropriate situations.
Diodes are presently available in contact sizes 22 and 20.
Transient protection can be provided in receptacle, plug
or adapter congurations. These connectors are intermateable and
intermountable with the following MIL-Specs:
Transient Protection
Diode Connectors
MIL-DTL-5015
MIL-DTL-26482
MIL-DTL-26500
MIL-DTL-27599
MIL-DTL-38999
MIL-DTL-83723
Amphenol can provide COTS solutions utilizing
leaded & surface mounted devices. For more information
contact Amphenol Aerospace at 800-678-0141.
74 Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
The Amphenol® Energy Shunting Assembly (ESA) is a simple, compact
unit which provides lightning and electromagnetic pulse (EMP)
protection of systems in which many signal lines enter sensitive
electronic equipment. The efcient packaging of the ESA circumvents
the concept of one protective device per line. It provides a surge arrestor
which has the advantage of space sav ing and simplied assembly when
compared to current protective devices which range from diodes to
large spark gaps.
The current ESA design consists of two 53-pin contact,
Mil-Stan dard, hermetic connectors assembled back to back, and
encom passing a ground plate. A sealed chamber is formed within
this thru-bulkhead unit, housing 53 in-line spark gaps. Introducing a
controlled atmosphere enhances fast rise breakdown.
The ESA can be integrated with an EMI lter connector which can
improve its performance. These two assemblies provide a method to
help protect against lightning, EMP, EMI and TEM PEST effects.
Transient Protection
ESA – Energy Shunting Assembly
Diode
ESA
ENERGY SHUNTING ASSEMBLY
PERFORMANCE CHARACTERISTICS
1. DC breakdown voltage 230 Volts
2. Maximum rated surge discharge current (8 x 20 microsecond pulse) 5,000 Amperes per pin
3. Insulation resistance 1010 ohms minimum
4. Capacitance between each electrode and the ground plane Less than 2 pf
5. Rate-of-rise breakdown voltage Maximum Breakdown
Voltage (Volts)
Rate of Rise
(Volts/microsecond)
600
800
1,500
2,000
10
1,000
10,000
1000,000
6. Surge breakdown unbalance (at 100 Volts/microseconds) 180 Volts
7. Surge life (500 Ampere – 10 x 1,000 microsecond) 400 Surges
8. Hold-over voltage 100 Volts
9. Arcing voltage 40 Volts
10.Glow to arc transition point 1 Ampere
11.Temperature range –40°F to 150°F
(233°K to 339°K)
75
Contact Amphenol Aerospace for more information at 800-678-0141 or Filterapps@amphenol-aao.com • amphenol-aerospace.com
EMI/EMP
G
Filter
Amphenol has developed cylindrical and rectangular
connectors which protect sensitive components from
Electrostatic Discharge (ESD) without diodes, varistors, gas tubes,
or “experimental” semi-conductive materials.
These connectors utilize the Faraday Cage principle to shunt
electro static discharge events to the conductive enclosure on
which the con nector is mounted, thus never allowing the high
voltage, high current discharge event to reside on any contacts.
The ESD protected connectors have the same physical envelope
as their standard counterparts, and do not require special
mounting or ter minating techniques. All of the contacts remain fully
functional, and electrical characteristics such as capacitance are
not effected.
PRODUCT FEATURES:
Connector envelope identical to unprotected design for
most applications
Exceeds protection requirements of IEC 801-2 and
MIL-STD-1686:
Ensures that all components within a conductive enclosure
will be sub jected to a maximum of 10V during electrostatic
discharges between –26 KV and +26 KV
Voltage observed on contacts during ESD events –
<10V (at 1 megohm)
Current observed on contacts during ESD events –
<100 milliamperes (at 2 ohms)
Response time – instantaneous
(voltage and current are maximum values)
Maximum ESD voltage – tested to ±26KV
No capacitive loading
Eliminates the need for discrete components (such as
diodes) and max imizes printed circuit board real estate for
equipment housed in con ductive enclosures which require
ESD protection as free-standing units
Operating voltage of connectors not affected for most
designs
Pulse life – innite
WHAT IS ELECTROSTATIC DISCHARGE (ESD)?
Electrostatic Discharge (ESD) is the rapid transfer of a static electric
charge from one body to another. A static electric charge consists
of either a surplus or depletion of electrons on a body, which gives
that body a potential or voltage relative to ground (or another
body). The discharge is extremely fast (less than 1 nanosecond
risetime) and the current ow may exceed 100 amps!
Static electricity is normally the result of two materials transferring
charges when rubbed or separated, such as shoes scufng across
a dry carpet, or sheets of untreated plastic being separated. This
phe nomena is commonly referred to as the triboelectric effect.
The voltage developed due to the triboelectric effect depends on
the materials involved, the quantity and type of contact, and
relative humid ity. In a dry environment a person can accumulate a
charge of up to 25 KV! In a moist environment a person’s
potential is reduced due to the effect of moisture on the insulating
properties of materials.
WHAT IS A FARADAY CAGE?
A Faraday Cage is a conductive enclosure. It may be solid in form
such as a sheet–metal enclosure, or it may be full of apertures,
such as a wire cloth box. When a charge is placed on a Faraday
Cage, the electrons which make up the charge, having like polarity,
try to position themselves as far as possible from each
other. This places the electrons on the outer surface of
the enclo sure, leaving the inner surface uncharged. The
charge on the outer surface does not induce a charge on
any neutral object inside of the Faraday Cage, and
therefore does not try to transfer itself onto the internal
object. Neutral objects (such as IC’s) inside of a faraday
cage are thereby
protected from ESD activity external to the Fara day
Cage.
The voltage and current observed on neutral objects
within a Faraday Cage during ESD events are due to the
secondary effects of ESD. These include Electromag-
netic Interference (EMI), magnetic and electrical eld
coupling. The Faraday Cage of the Amphenol ESD
Protected Con nectors has been designed to minimize
these effects.
THE AMPHENOL® ESD PROTECTED
CONNECTORS
The Amphenol ESD Protected Connectors have a
Fara day Cage at the mating interface. The Faraday Cage
has been specically designed to intercept electrostatic
dis charges from the contacts in the unmated state, while
maintaining each contact’s isolation when the connector
is mated. When the ESD Protected Connectors have
been mounted to a conductive enclosure, a Faraday
Cage is created which will protect components located
within the enclosure from electrostatic discharges. This
elimi nates the need for discrete components such as
diodes and gas discharge tubes, and saves printed
circuit board real estate. Amphenol ESD Protected
Connectors have also been applied to Line Replaceable
Modules (LRM).*
ESD TESTING ON MIL-DTL-38999, SERIES III
FILTER CYLINDRICAL CONNECTOR (ACTUAL PHOTO)
(ESD) Protected Connectors
Protection from Electrostatic Discharge