www.clare.com
DS-CPC1106N-R02 1
CPC1106N
Single-Pole, Normally Closed
4-Lead SOP OptoMOS® Relay
RoHS
2002/95/EC e3
Pb
Part # Description
CPC1106N 4-Lead SOP (100/tube)
CPC1106NTR 4-Lead SOP (2000/reel)
Parameter Rating Units
Blocking Voltage 60 VP
Load Current 75 mA
Max On-Resistance 10 Ω
LED Current to Operate 0.5 mA
Applications
Features
Description
Ordering Information
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
• Designed for EN50130-4 Compliant
Security Systems
• Only 0.5mA of LED Current Required to Operate
• 1500Vrms Input/Output Isolation
• Small 4-Lead SOP Package
• TTL/CMOS Compatible Input
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Immune to Radiated EM Fields
• SMD Pick & Place, Wave Solderable
• Tape & Reel Version Available
The CPC1106N is a miniature, single-pole, normally
closed (1-Form-B) solid state relay in a 4-lead SOP
package that employs optically coupled MOSFET
technology to provide 1500Vrms of input to output
isolation.
The relay outputs are constructed with efficient
MOSFET switches and photovoltaic die that use
Clare's patented OptoMOS architecture while
the input, a highly efficient GaAlAs infrared LED,
provides the optically coupled control.
The CPC1106N, using Clare’s state of the art
double-molded vertical construction packaging to
produce one of the world’s smallest relays, offers
board space savings of at least 20% over the
competitor’s larger 4-lead SOP relay.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
Form-B
IF
10%
90%
ILOAD
ton
toff
Pin Configuration
Switching Characteristics
of Normally Closed Devices
1
23
4
+ Control
– Control
Load
Load
www.clare.com
2R02
CPC1106N
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Parameter Ratings Units
Blocking Voltage 60 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Disipation 70 mW
Total Power Dissipation 1400 mW
Isolation Voltage, Input to Output 1500 Vrms
ESD Rating, Human Body Model 8 kV
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 3.33 mW / ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current
Continuous IF=0mA IL--75
mA
Peak t=10ms ILPK - - 350
On-Resistance 1IF=0mA, IL=75mA RON - 3.85 10 Ω
Off-State Leakage Current IF=0.5mA, VL=60VPILEAK --1µA
Switching Speeds
Turn-On IF=2mA, VL=10V ton --10
ms
Turn-Off toff --10
Output Capacitance IF=0.5mA, VL=50V, f=1MHz COUT -10 -pF
Input Characteristics
Input Control Current 2-I
F- 0.16 0.5 mA
Input Dropout Current IL=75mA IF0.05 - - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR- - 10 µA
Common Characteristics
Capacitance, Input to Output - - - 1 - pF
1 Measurement taken within 1 second of on-time.
2 For applications requiring high temperature operation (greater than 60oC) a LED drive current of 2mA is recommended.
Electrical Characteristics @ 25ºC
CPC1106N
www.clare.com 3
R02
PERFORMANCE DATA*
*The Performance Data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
Turn-On Time (ms)
0.50 0.53 0.56 0.59 0.62 0.65 0.68
Device Count (N)
0
5
10
15
20
25
Typical Turn-On Time
(N=50, IF=2mA, IL=75mA, TA=25ºC)
Turn-Off Time (ms)
0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1
Device Count (N)
0
5
10
15
20
25
Typical Turn-Off Time
(N=50, IF=2mA, IL=75mA, TA=25ºC)
On-Resistance (Ω)
3.70 3.75 3.80 3.85 3.90 3.95 4.00
Device Count (N)
0
5
10
15
20
25
Typical On-Resistance Distribution
(N=50, IF=0mA, IL=75mA, TA=25ºC)
LED Forward Current (mA)
0.11 0.13 0.15 0.17 0.19 0.21 0.23
Device Count (N)
0
5
10
15
20
Typical IF for Switch Operation
(N=50, IL=75mA, TA=25ºC)
Blocking Voltage (VP)
79 81 83 85 87 89 91 93
Device Count (N)
0
2
4
6
8
10
12
14
Typical Blocking Voltage Distribution
(N=50, IF=0.5mA, TA=25ºC)
LED Forward Voltage (V)
1.235 1.240 1.245 1.250 1.255 1.260 1.265
Device Count (N)
0
5
10
15
20
25
30
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Forward Voltage (V)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Typical LED Forward Voltage Drop
vs. Temperature
IF=50mA
IF=20mA
IF=10mA
IF=5mA
IF=2mA
IF=1mA
LED Forward Current (mA)
0 1020304050
Turn-On Time (μs)
532
534
536
538
540
542
544
546
548
Typical Turn-On Time
vs. LED Forward Current
(IL=50mA, TA=25ºC)
LED Forward Current (mA)
0 1020304050
Turn-Off Time (μs)
0
200
400
600
800
1000
1200
1400
Typical Turn-Off Time
vs. LED Forward Current
(IL=50mA, TA=25ºC)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Forward Current (mA)
0.10
0.15
0.20
0.25
0.30
Typical IF for Switch Operation
vs. Temperature
(IL=50mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Turn-On Time (μs)
100
200
300
400
500
600
700
800
900
Typical Turn-On Time
vs. Temperature
(IL=50mA)
IF=5mA
IF=2mA
IF=1mA
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Turn-Off Time (μs)
0
500
1000
1500
2000
2500
3000
Typical Turn-Off Time
vs. Temperature
(IL=50mA)
IF=1mA
IF=2mA
IF=5mA
www.clare.com
4R02
CPC1106N
PERFORMANCE DATA*
*The Performance Data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
Temperature (ºC)
-40 -20 0 20 40 60 80 100
On-Resistance (Ω)
3.0
3.5
4.0
4.5
5.0
Typical On-Resistance
vs. Temperature
(IF=0mA, IL=50mA)
Load Voltage (V)
-0.4 -0.3 -0.2 -0.1 0.0 0.1 0.2 0.3 0.4
Load Current (mA)
-100
-50
0
50
100
Typical Load Current
vs. Load Voltage
(IF=0mA, TA=25ºC)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Load Current (mA)
40
45
50
55
60
65
70
75
80
Maximum Load Current
vs. Temperature
(IF=0mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Blocking Voltage (VP)
72
74
76
78
80
82
84
Typical Blocking Voltage
vs. Temperature
(IF=1mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Leakage Current (nA)
0
10
20
30
40
50
Typical Leakage vs. Temperature
Measured Across Pins 3&4
(IF=1mA, VL=60V)
Load Voltage (V)
0 102030405060
Output Capacitance (pF)
5
10
15
20
25
30
35
40
Output Capacitance vs. Load Voltage
(IF=0.5mA)
Time
10μs 100μs 1ms 10ms 100ms 1s 10s 100s
Load Current (mA)
0
100
200
300
400
500
600
700
800
Energy Rating Curve
(IF=0mA)
CPC1106N
www.clare.com 5
R02
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
CPC1106N MSL 3
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
CPC1106N 260ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
RoHS
2002/95/EC e3
Pb
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1106N-R02
©Copyright 2010, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
8/27/2010
For additional information please visit our website at: www.clare.com
6
CPC1106N
Mechanical Dimensions
Recommended PCB Land Pattern
2.54
(0.10)
5.60
(0.2205)
1.30
(0.0512)
0.60
(0.0217)
Dimensions
mm
(inches)
Pin 1
4.089 ± 0.203
(0.161 ± 0.008)
2.54 Typ
(0.100 Typ)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003) 0.432 ± 0.127
(0.017 ± 0.005)
0.200 ± 0.025
(0.008 ± 0.001)
1.02 ± 0.025
(0.040 ± 0.001)
2.184 Max
(0.086 Max)
0.381 TYP.
(0.015 TYP.)
Lead to package standoff:
MIN: 0.0254 (0.001)
MAX: 0.102 (0.004)
0.762 ± 0.102
(0.030 ± 0.004)
Dimensions
mm
(inches)
NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
U
ser Direction of Feed
User Direction of Feed
K0=2.70
(0.106)
K1=2.30
(0.091)
B0=4.70
(0.185)
W=12.00
(0.472)
P=8.00
(0.315)
A0=6.50
(0.256)
CPC1106N
CPC1106N Tape & Reel
