10ETS16STRR - International Rectifier

Major Ratings and Characteristics

Characteristics 10ETS.. Units

IF(AV) Sinusoidal waveform 10 A

VRRM Range 800 to 1200 V

IFSM 200 A

VF@

10 A, TJ

= 25°C 1.1 V

TJ- 40 to 150 °C

Capacitive input filter TA

= 55°C, TJ = 125°C 12.0 16.0 A

common heatsink of 1°C/ W

Output Current in Typical Applications

Applications Single-phase Bridge Three-phase Bridge Units

INPUT RECTIFIER DIODE

SAFEIR Series

10ETS12, 10ETS12S

Bulletin I2121 rev. C 12/01

1www.irf.com

TO-220AC

Package Outline

D2 Pak (SMD-220)

Package Outline

Description/Features

The 10ETS.. rectifier SAFEIR series has been

optimized for very low forward voltage drop, with

moderate leakage. The glass passivation

technology used has reliable operation up to 150°C

junction temperature.

Typical applications are in input rectification and

these products are designed to be used with

International Rectifier Switches and Output

Rectifiers which are available in identical package

outlines.

VF < 1V @ 10A

IFSM = 200A

VRRM 800 to 1200V

10ETS.., 10ETS..S SAFEIR Series

Bulletin I2121 rev. C 12/01

www.irf.com

IF(AV) Max. Average Forward Current 10 A @ TC = 105° C, 180° conduction half sine wave

IFSM Max. Peak One Cycle Non-Repetitive 170 10ms Sine pulse, rated VRRM

applied

Surge Current 200 10ms Sine pulse, no voltage reapplied

I2t Max. I2t for fusing 130 10ms Sine pulse, rated VRRM

applied

145 10ms Sine pulse, no voltage reapplied

I2√t Max. I2√t for fusing 1450 A2√s t = 0.1 to 10ms, no voltage reapplied

Part Number

VRRM , maximum VRSM , maximum non repetitive IRRM

peak reverse voltage peak reverse voltage 150°C

VVmA

10ETS08, 10ETS08S 800 900 0.5

10ETS12, 10ETS12S 1200 1300

Voltage Ratings

TJMax. Junction Temperature Range - 40 to 150 °C

Tstg Max. Storage Temperature Range - 40 to 150 °C

RthJC Max. Thermal Resistance Junction 2.5 °C/W DC operation

to Case

RthJA Max. Thermal Resistance Junction 62 °C/W

to Ambient (PCB Mount)*

TsSoldering Temperature 240 °C

wt Approximate Weight 2 (0.07) g (oz.)

Case Style TO-220AC, D2Pak (SMD-220)

Thermal-Mechanical Specifications

Parameters 10ETS.. Units Conditions

Absolute Maximum Ratings

Electrical Specifications

Parameters 10ETS.. Units Conditions

A2s

VFM Max. Forward Voltage Drop 1.1 V @ 10A, TJ = 25°C

rtForward slope resistance 20 mΩ

VF(TO) Threshold voltage 0.82 V

IRM Max. Reverse Leakage Current 0.05 TJ = 25 °C

0.50 TJ = 150 °C

Parameters 10ETS.. Units Conditions

TJ = 150°C

VR = rated VRRM

* When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W

For recommended footprint and soldering techniques refer to application note #AN-994

Bulletin I2121 rev. C 12/01

10ETS.., 10ETS..S SAFEIR Series

www.irf.com

Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics

Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics

Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current

100

110

120

130

140

150

024681012

60 90 120 180

Maximum Allowable Case Temperature ( C)

Conduction Angle

Average Forward Current (A)

10ETS.. Series

R (DC) = 2.5 C/W

thJC

100

110

120

130

140

150

0 2 4 6 8 10 12 14 16 18

90 120 180

Maximum Allowable Case Temperature ( C)

Conduction Period

Average Forward Current (A)

10ETS.. Series

R (DC) = 2.5 C/W

thJC

0246810

RMS Limit

180

120

Conduction Angle

Average Forward Current (A)

Maximum Average Forward Power Loss (W)

10ETS.. Series

T = 150 C

0 2 4 6 8 10 12 14 16

180

120

RMS Limit

Conduction Period

Average Forward Current (A)

Maximum Average Forward Power Loss (W)

10ETS.. Series

T = 150 C

100

120

140

160

180

200

110100

Number Of Equal Amplitude Half Cycle Current Pulses (N)

Peak Half Sine Wave Forward Current (A)

Initial T = 150 C

@ 60 Hz 0.0083 s

@ 50 Hz 0.0100 s

10ETS.. Series

At Any Rated Load Condition And With

Rated V Applied Following Surge.

RRM

100

120

140

160

180

200

220

240

0.01 0.1 1

Pulse Train Duration (s)

Peak Half Sine Wave Forward Current (A)

10ETS.. Series

Versus Pulse Train Duration.

Maximum Non Repetitive Surge Current

Initial T = 150 C

No Vo ltage Reap plied

Rated V Reapplied

RRM

10ETS.., 10ETS..S SAFEIR Series

Bulletin I2121 rev. C 12/01

www.irf.com

Fig. 9 - Thermal Impedance ZthJC Characteristics

Fig. 8 - Forward Voltage Drop Characteristics

0.1

0.0001 0.001 0.01 0.1 1 10

Square Wave Pulse Duration (s)

D = 0.50

D = 0.33

D = 0.25

D = 0.17

D = 0.08

Steady State Value

(DC Operation)

10ETS.. Series

Single Pulse

thJC

Transient Thermal Impedance Z ( C/W)

100

00.511.522.53

T = 25 C

Instantaneous Forward Current (A)

Instantaneous Forward Voltage (V)

T = 150 C

10ETS.. Series

Bulletin I2121 rev. C 12/01

10ETS.., 10ETS..S SAFEIR Series

www.irf.com

3.78 (0.15)

3.54 (0.14)

10.54 (0.41)

MAX.

DIA.

15.24 (0.60)

14.84 (0.58)

2.92 (0.11)

2.54 (0.10)

TERM 2

14.09 (0.55)

13.47 (0.53)

3.96 (0.16)

3.55 (0.14)

0.94 (0.04)

0.69 (0.03)

4.57 (0.18)

4.32 (0.17)

30.61 (0.02) MAX.

5.08 (0.20) REF.

1.32 (0.05)

1.22 (0.05)

6.48 (0.25)

6.23 (0.24)

2°

0.10 (0.004)

1.40 (0.05)

1.15 (0.04)

2.89 (0.11)

2.64 (0.10)

2.04 (0.080) MAX.

Outline Table

TO-220AC

Dimensions in millimeters (inches)

10.16 (0.40)

REF.

8.89 (0.35)

4.57 (0.18)

4.32 (0.17)

0.61 (0.02) MAX.

5.08 (0.20) REF.

1.32 (0.05)

1.22 (0.05)

6.47 (0.25)

6.18 (0.24)

93°

REF.

2.61 (0.10)

2.32 (0.09)

5.28 (0.21)

4.78 (0.19)

4.69 (0.18)

4.20 (0.16)

0.55 (0.02)

0.46 (0.02)

14.73 (0.58)

15.49 (0.61)

1.40 (0.055)

1.14 (0.045)

0.93 (0.37)

0.69 (0.27)

11.43 (0.45)

17.78 (0.70)

8.89 (0.35)

3.81 (0.15)

2.08 (0.08)

2.54 (0.10)

MINIMUM RECOMMENDED FOOTPRINT

D2Pak (SMD-220)

Dimensions in millimeters and inches

Anode

athode

Base

Cathode

Anode

Base

Cathode

node

10ETS.., 10ETS..S SAFEIR Series

Bulletin I2121 rev. C 12/01

www.irf.com

Dimensions in millimeters and inches

TRR

FEED DIRECTION

TRL

FEED DIRECTION

10.90 ( 0.4 29)

10.70 ( 0.4 21) 16 .10 (0.634)

15 .90 (0.6 26)

1.75 (0.069)

1.25 (0.049)

1.85 (0.073)

1.65 (0.065)

4.10 (0.161)

3.90 (0.153)

1.60 (0.063)

1.50 (0.059)

DIA.

1.60 (0.063)

1.50 (0.059)

DIA.

11 .60 (0.457)

11 .40 (0.449)

15.42 (0.609)

15.22 (0.601)

4.72 (0.18 6)

4.52 (0.17 8)

24 .30 (0 .95 7)

23 .90 (0 .94 1)

0.368 (0.0145)

0.342 (0.0135)

360 (14.173)

DIA. MAX.

26 .40 (1.039)

24 .40 (0.961)

13.50 (0.532)

12.80 (0.504)DIA.

60 (2 .36 2)

DIA. MIN.

SMD-220 Tape & Reel

When ordering, indicate the part

number, part orientation, and the

quantity. Quantities are in multiples

of 800 piece s p er reel fo r bo th

TRL and TRR.

Tape & Reel Information

9G3A 9512

EXAMPLE: THIS IS AN 10ETS12S

INTERNATIONAL

RECTIFIER LOGO

PART NUMBER

Marking Information

DATE CODE (YYWW)

YY = YEAR

WW = WEEK

ASSEMBLY

LOT CODE

(K)

(A)

10ETS12S

Bulletin I2121 rev. C 12/01

10ETS.., 10ETS..S SAFEIR Series

www.irf.com

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7309

Visit us at www.irf.com for sales contact information. 11/01

Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level.

Qualification Standards can be found on IR's Web site.

10 E T S 12 S TRL

Device Code

1524

Ordering Information Table

08 = 800V

12 = 1200V

1- Current Rating

2- Circuit Configuration

E = Single Diode

3- Package

T = TO-220AC

4- Type of Silicon

S = Standard Recovery Rectifier

5- Voltage code: Code x 100 = VRRM

6- S = TO-220 D2Pak (SMD-220) Version

7- Tape and Reel Option

TRL = Left Reel

TRR = Right Orientation Reel