RClamp0504FB Low Capacitance RClamp(R) 5V TVS for ESD & EOS Protection PROTECTION PRODUCTS Description Features RClamp(R) TVS diodes are designed to protect sensitive electronics from damage or latch-up due to transient surge events. This device offers desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. * High ESD withstand Voltage: +/-24kV (Contact) & +/30kV (Air) per IEC 61000-4-2 * High EOS Surge capability * Low ESD clamping voltage * Working voltage: 5V * Low capacitance: 1.1 pF Typical (I/O to GND) * Low dynamic resistance: 0.25 * Solid-state silicon-avalanche technology RClamp(R)0504FB features extremely good ESD and EOS protection characteristics highlighted by low dynamic resistance and high surge capability. Data (I/O) lines are protected from EOS surge events as high as 14A (tp = 8/20s). Power buses may subjected to even harsher EOS events. The TVS connection at pin 5 allows protection of VBus lines to 28A (tp = 8/20s). Mechanical Characteristics * * * * * * SC-70 6L package Pb-Free, Halogen Free, RoHS/WEEE compliant Nominal Dimensions: 1.0 x 0.6 x 0.50 mm Lead Finish: Matte Tin Marking: Marking code Packaging: Tape and Reel RClamp0504FB is in a 6-pin, SC-70 6L package. The leads are finished with lead-free matte tin. The Applications combination of small size, low capacitance, and high ESD and EOS surge capability makes them ideal for use in * Monitors and Flat Panel Displays * Analog Video Lines applications such as USB 2.0, multimedia * LVDS Lines cards, and video interfaces. * USB 2.0 / USB 3.0 * SIM Ports Circuit Diagram Schematic & Pin Configuration 5 1 3 4 6 2 SC-70 6L (Top View) RClamp0504FB Final Datasheet Revision date Rev 2.0 10/24/2016 www.semtech.com 1 of 7 Semtech Absolute Maximum Rating Rating Symbol Value Units Peak Pulse Power (I/O Pins, tp = 8/20s) PPK 230 W Peak Pulse Power (VBus Pin, tp = 8/20s) PPK 500 W Peak Pulse Current (I/O Pins, tp = 8/20s) IPP 14 A Peak Pulse Current (VBus Pin, tp = 8/20s) IPP 28 A ESD per IEC 61000-4-2 (Air) ESD per IEC 61000-4-2 (Contact)(1) VESD 30 24 kV Operating Temperature TJ -55 to +125 O Storage Temperature TSTG -55 to +150 O (1) C C Electrical Characteristics (T=25OC unless otherwise specified) Parameter Symbol Conditions Reverse Stand-Off Voltage VRWM Any pin to Pin 2 Reverse Breakdown Voltage VBR IBR = 1mA, any I/O Pin to Pin 2 Reverse Leakage Current IR VRWM = 5V, any I/O Pin to Pin 2 IPP = 14A 13.7 VC tp = 8/20s (Any I/O Pin to Pin 2 ) tp = 8/20s (Pin 5 to Pin 2 ) IPP = 28A 15.5 IPP = 4A 10.5 IPP = 16A 13.5 Clamping Voltage Min. Typ. ESD Clamping Voltage VC tp = 0.2/100ns (Any I/O Pin to Pin 2) Dynamic Resistance2,3 RDYN tp = 0.2/100ns, Any I/O Pin to Pin 2 Junction Capacitance CJ VR = 0V, f = 1MHz 2 6 8.5 Max. Units 5 V 10 V 0.1 A 16.5 V 17.5 V 0.25 Any I/O Pin to Pin 2 1.1 2.5 Between I/O pins 0.55 1.5 pF Notes 1) Measured with a 40dB attenuator, 50 Ohm scope input impedance, 2GHz bandwidth. ESD gun return path connected to ESD ground plane. 2) Transmission Line Pulse Test (TLP) Settings: tp = 100ns, tr = 0.2ns, ITLP and V TLP averaging window: t1 = 70ns to t2 = 90ns. 3) Dynamic resistance calculated from ITLP = 4A to ITLP = 16A RClamp0504FB Final Datasheet Revision Date Rev 2.0 10/24/2016 www.semtech.com 2 of 7 Semtech Typical Characteristics Non Repetitive Peak Pulse Power vs. Pulse Time Power Derating Curve 120 100 1 % of Rated Power or IPP Peak Pulse Power - PPP (kW) 10 VBus 0.1 Data (I/O) Lines 60 40 20 TA = 25OC 0.01 80 DR040412-240 0.1 1 10 100 DR040512:25:125:150 1000 0 Pulse Duration - tp (s) 0 25 125 150 Capacitance vs. Reverse Voltage (Pins 1, 3, 4, 6 to Pin 2) Clamping Voltage vs. Peak Pulse Current (tp=8/20s) 25 50 75 100 Ambient Temperature - TA (OC) 3 TA = 25OC 2.5 Junction Capacitance-CJ (pF) Clamping Voltage-VC (V) 20 Pin 5 15 Pins 1, 3, 4, 6 10 5 2 1.5 1 0.5 f = 1 MHz 0 0 0 5 10 15 20 25 Peak Pulse Current - IPP (A) 30 0 35 2 3 4 Reverse Voltage -VR (V) 5 6 ESD Clamping (-8kV Contact per IEC 61000-4-2) (Pins 1, 3, 4, 6) ESD Clamping (8kV Contact per IEC 61000-4-2) (Pins 1, 3, 4, 6) 50 140 TA = 25OC. Waveform IEC61000-4-2 8kV contact discharge. Measured with and corrected for 50, 40dB Attenuator. 50 Scope Input Impedance, 2GHz BW. ESD Gun Return connected to ESD Ground Plane. 120 100 0 Clamping Voltage (V) 80 Clamping Voltage (V) 1 60 40 20 -50 -100 -150 0 TA = 25OC. Waveform IEC61000-4-2 -8kV contact discharge. Measured with and corrected for 50, 40dB Attenuator. 50 Scope Input Impedance, 2GHz BW. ESD Gun Return connected to ESD Ground Plane. -200 -20 -40 -250 -10 RClamp0504FB Final Datasheet Revision Date 10 Rev 2.0 10/24/2016 30 Time (ns) 50 70 -10 www.semtech.com 10 30 Time (ns) 50 70 3 of 7 Semtech Typical Characteristics (Continued) Positive TLP Characteristic (Pins 1, 3, 4, 6) 35 Negative TLP Characteristic (Pins 1, 3, 4, 6) 0 Transimission Line Pulse (TLP) Settings: tp= 100ns, tr=0.2ns, ITLP and VTLP averaging window: t1=70ns to t2=90ns 30 Transimission Line Pulse (TLP) Settings: tp= 100ns, tr=0.2ns, ITLP and VTLP averaging window: t1=70ns to t2=90ns -5 25 -10 TLP Current (A) TLP Current (A) 20 15 10 -15 -20 5 -25 0 -30 -5 0 2 4 6 8 10 TLP Voltage (V) 12 14 16 18 -18 -16 -12 -10 -8 TLP Voltage (V) -6 -4 -2 0 Insertion Loss (I/O Pin to I/O Pin) 1 1 0 0 -1 -1 -2 -2 Insertion Loss - IL (dB) Insertion Loss - IL (dB) Insertion Loss (I/O Pins 1, 3, 4, 6) -14 -3 -4 -3 -4 -5 -5 -6 -6 1 10 100 Frequency (MHz) 1 1000 10 100 Frequency (MHz) 1000 Analog Crosstalk 20 0 Analog Crosstalk (dB) -20 -40 -60 -80 -100 10 RClamp0504FB Final Datasheet Revision Date 100 Frequency (MHz) Rev 2.0 10/24/2016 1000 www.semtech.com 4 of 7 Semtech Outline Drawing - SC70 6L A D e1 N DIM A A1 A2 b c D E1 E e e1 L L1 N 01 aaa bbb ccc E/2 E1 ccc C 2X N/2 TIPS 1 E 2 e B D aaa C A2 SEATING PLANE DIMENSIONS MILLIMETERS MIN NOM MAX 1.10 0.10 0.90 1.00 0.30 0.22 2.00 2.20 1.25 1.35 2.10 BSC 0.65 BSC 1.30 BSC 0.26 0.36 0.46 (0.42) 6 0 8 0.10 0.10 0.30 0.00 0.70 0.15 0.08 1.80 1.15 A H A1 C bxN bbb C A-B D c GAGE PLANE 0.15 L (L1) SEE DETAIL A DETAIL 01 A SIDE VIEW NOTES: 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. DATUMS -A- AND -B- TO BE DETERMINED AT DATUM PLANE -H3. DIMENSIONS "E1" AND "D" DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. Land Pattern - SC70 6L X DIM (C) G Y Z C G P X Y Z DIMENSIONS INCHES MILLIMETERS (.073) .039 .026 .016 .033 .106 (1.85) 1.00 0.65 0.40 0.85 2.70 P NOTES: 1. 2. RClamp0504FB Final Datasheet Revision Date Rev 2.0 10/24/2016 CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY. CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET. www.semtech.com 5 of 7 Semtech Marking Code 0504F YYWW Tape and Reel Specification 0504F YYWW 0504F YYWW 0504F YYWW Pin 1 Location User Direction of feed Ordering Information Part Number Qty per Reel Reel Size RClamp0504FBTCT 3,000 7" RClamp0504FB Final Datasheet Revision Date Rev 2.0 10/24/2016 www.semtech.com 6 of 7 Semtech IMPORTANT NOTICE Information relating to this product and the application or design described herein is believed to be reliable, however such information is provided as a guide only and Semtech assumes no liability for any errors in this document, or for the application or design described herein. Semtech reserves the right to make changes to the product or this document at any time without notice. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. Semtech warrants performance of its products to the specifications applicable at the time of sale, and all sales are made in accordance with Semtech's standard terms and conditions of sale. SEMTECH PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS, OR IN NUCLEAR APPLICATIONS IN WHICH THE FAILURE COULD BE REASONABLY EXPECTED TO RESULT IN PERSONAL INJURY, LOSS OF LIFE OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. INCLUSION OF SEMTECH PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE UNDERTAKEN SOLELY AT THE CUSTOMER'S OWN RISK. Should a customer purchase or use Semtech products for any such unauthorized application, the customer shall indemnify and hold Semtech and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs damages and attorney fees which could arise. The Semtech name and logo are registered trademarks of the Semtech Corporation. All other trademarks and trade names mentioned may be marks and names of Semtech or their respective companies. Semtech reserves the right to make changes to, or discontinue any products described in this document without further notice. Semtech makes no warranty, representation or guarantee, express or implied, regarding the suitability of its products for any particular purpose. All rights reserved. (c) Semtech 2015 Contact Information Semtech Corporation 200 Flynn Road, Camarillo, CA 93012 Phone: (805) 498-2111, Fax: (805) 498-3804 www.semtech.com RClamp0504FB Final Datasheet Revision date Rev. 2.0 10/24/2016 7 of 7 Semtech