Optocoupler--DIP Package OPIA600 through OPIA605 Features: * * * * 3,750 to 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photodarlington Sensor Low-cost plastic Dual-In-Line (DIP) package Agency Approvals: * * UL Certification No: E58730 VDE Pending Description: The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photodarlington) in a dual-in-line package. A wide selection of configurations are available. With typical isolation voltage of 3,750 or 5,000 Volts RMS, these product meet typical power system isolation requirements. Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. In many applications, analog signal levels may be required to be transmitted between two power systems while maintaining isolation between the power systems up to 5,000 volts RMS. A variety of LED and photosensor configurations are available depending on the system requirements. The ratio Current Transfer Ratio (CTR) is identified between the output current and input current for analog photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device. CTR = Photosensor - Current 20mA = *100 = 200 10mA LED - Current All DIP product is shipped in a shipping tube with "TU" identified on the end of the part number. Example: OPI600DTU is a 6-Pin DIP shipped in a tube (TU). . Applications: * * High voltage isolation PCBoard power system isolation RoHS * * * Industrial equipment power isolation Medical equipment power isolation Office equipment OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.3 11/08 Page 1 of 19 Optocoupler--DIP Package OPIA600 through OPIA605 Package Outline Dimensions and Schematics: Top-View Pin # Part Number 1 2 OPIA600 A OPIA601 OPIA602 3 4 5 6 K E C B A K E C B A K E C B OPIA603 A K E C B OPIA604 A-K K-A E C B OPIA605 A K E C Symbol Definition Symbol Definition Symbol Definition Symbol Definition A Anode B Base C Collector E Emitter Analog Output Devices Ordering Information Part Number Isolation Voltage Max. (Vrms) OPIA600D OPIA601D OPIA602D OPIA603D OPIA604D OPIA605D 5,000 5,000 5,000 5,000 5,000 5,000 Configuration Information LED Sensor Packaging CTR Min/Typ/Max Typ. Tr / Tf (s) RL = 100 ohms 60 / - / 600 5/4 600 / - / 9,000 60 / 50 500 / 4,000 / 5 / 60 50 / - / 600 2/3 50 / - / 600 2/3 40 / - / 400 4/3 Configuration: Definition of Terms LED Identification--Sensor Identification A = Anode K = Cathode B = Base C = Collector Part Number Suffix: TU = Ship in Tubes Package Configuration 6 Pin DIP 6 Pin DIP 6 Pin DIP 6 Pin DIP 6 Pin DIP 6 Pin DIP A K--B C E A K--B C E (Dar) A K--B C E (Dar) A K--B C E A K, K A--B C E A K--C E E = Emitter Example: OPIA600DTU OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/08 Page 2 of 19 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--DIP Package OPIA600 through OPIA605 Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature -55 C to +125 C Operating Temperature OPIA600, OPIA601, OPIA602 OPIA603, OPIA604, OPIA605 -30 C to +100 C -55 C to +125 C Isolation voltage (1 minute) OPIA6 _ _ Series Total Package Power Dissipation OPIA6 _ _ Series Lead Soldering Temperature (1/16" (1.6 mm) from case for 5 seconds with soldering iron) 5,000 Vrms 200 mW 260 C Input Diode Continuous Forward Current OPIA6 _ _ Series 50 mA Peak Forward current (1 s pulse width, 300 pps) OPIA6 _ _ Series 1A Reverse Voltage OPIA6 _ _ Series 6V Power Dissipation OPIA6 _ _ Series 70 mW Output Phototransistor Collector-Emitter Voltage OPIA600, OPIA604, OPIA605 OPIA603 OPIA601 OPIA602 Emitter-Collector Voltage OPIA600, OPIA605 OPIA603, OPIA604 OPIA601, OPIA602 Collector Current OPIA600, OPIA603, OPIA604, OPIA605 OPIA601, OPIA602 Power Dissipation OPIA600, OPIA605 OPIA601, OPIA602, OPIA603, OPIA604 60 V 350 V 300 V 30 V 6V 7V 50 mA 150 mA 150 mW 200 mW OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.3 11/08 Page 3 of 19 Optocoupler--DIP Package OPIA600 through OPIA605 Electrical Characteristics (OPIA6 _ _ Series) PARAMETER SYMBOL MIN TYP MAX - 1.2 1.4 UNITS TEST CONDITIONS Input Diode Forward Voltage OPIA600, OPIA601, OPIA602, OPI604, OPIA605 OPIA603 1.0 1.2 1.3 VFM Peek Forward Voltage OPIA600, OPIA601, OPIA602, OPI604 OPIA603, OPIA605 - - 3.5 3.0 IR Reverse Current OPIA600, OPIA601, OPIA602, OPI604, OPIA605 OPIA603 - - 10 VF Ct Terminal Capacitance OPIA600, OPIA601, OPIA602, OPI604, OPIA605 OPIA603 IF = 20 mA V IF = 10 mA V IFM = 500 mA VR = 4 V A - - 10 - 30 - VR = 5 V V = 0.0 V, f = 1K Hz pf - 30 - V = 0.0 V, f = 1M Hz Output Phototransistor--OPIA600D, OPIA603D, OPIA604D, OPIA605D ICEO Collector dark Current OPIA600, OPIA604, OPIA605 OPIA603 - 10 100 200 nA IF = 0 mA, VCE = 20 V IF = 0 mA, VCE = 300 V VCEO Collector-emitter Saturation Voltage OPIA600, OPIA604, OPIA605 OPIA603 - 0.1 - 0.3 0.4 V IF = 20 mA, IC = 1 mA IF = 8 mA, IC = 2.4 mA fC Cutt-Off frequency - 80 - K Hz VCC = 5 V, IC = 2 mA, RL = 100 tR Rise Time OPIA600, OPIA604 OPIA603 OPIA605 - 5 2 4 20 20 s VCC = 5 V, IC = 2 mA, RL = 100 VCC = 10 V, IC = 2 mA, RL = 100 VCC = 2 V, IC = 2 mA, RL = 100 tF Fall Time OPIA600, OPIA604 OPIA603 OPIA605 - 4 3 3 20 20 s VCC = 5 V, IC = 2 mA, RL = 100 VCC = 10 V, IC = 2 mA, RL = 100 VCC = 2 V, IC = 2 mA, RL = 100 Continued on Next Page OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/08 Page 4 of 19 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--DIP Package OPIA600 through OPIA605 Electrical Characteristics (OPIA6 _ _ Series) - Continued from Previous Page PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Output PhotoDarlington--OPIA601D, OPIA602D ICEO Collector dark Current OPIA601 OPIA602 - - 1.0 0.1 A IF = 0 mA, VCE = 200 V IF = 0 mA, VCE = 10 V VCEO Collector-emitter Saturation Voltage OPIA601 OPIA602 - - 1.5 1.0 V IF = 20 mA, IC = 5 mA IF = 8 mA, IC = 2 mA fC Cutt-Off frequency OPIA601, OPIA602 - 7.0 - K Hz tR Rise Time OPIA601 OPIA602 - 60 5 300 40 s VCC = 2 V, IC = 20 mA, RL = 100 VCC = 10 V, IC = 50 mA, RL = 100 tF Fall Time OPIA601 OPIA602 - 50 60 250 100 s VCC = 2 V, IC = 20 mA, RL = 100 VCC = 10 V, IC = 50 mA, RL = 100 % IF = 2 mA, VCE = 5.0 V IF = 2 mA, VCE = 5.0 V IF = 10 mA, VCE = 10.0 V IF = 5 mA, VCE = 5.0 V IF = 1 mA, VCE = 5.0 V IF = 10 mA, VCE = 5.0 V 1.0 pF V = 0.0 V, f = 1M Hz - ohm VCC = 5 V, IC = 2 mA, RL = 100 Coupled Characteristics--OPIA6XXX Series CTR Current Transfer Ratio OPIA600 OPIA601 OPIA602 OPIA603 OPIA604 OPIA605 60 600 500 50 60 40 Cf Floating Capacitance - RISO Isolation resistance 5X10 600 9,000 4,000 600 600 400 0.6 10 11 10 DC500V OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.3 11/08 Page 5 of 19 Optocoupler--DIP Package OPIA600 through OPIA605 OPIA600 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/08 Page 6 of 19 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--DIP Package OPIA600 through OPIA605 OPIA600 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.3 11/08 Page 7 of 19 Optocoupler--DIP Package OPIA600 through OPIA605 OPIA601 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/08 Page 8 of 19 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--DIP Package OPIA600 through OPIA605 OPIA601 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.3 11/08 Page 9 of 19 Optocoupler--DIP Package OPIA600 through OPIA605 OPIA602 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/08 Page 10 of 19 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--DIP Package OPIA600 through OPIA605 OPIA602 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.3 11/08 Page 11 of 19 Optocoupler--DIP Package OPIA600 through OPIA605 OPIA603 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/08 Page 12 of 19 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--DIP Package OPIA600 through OPIA605 OPIA603 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.3 11/08 Page 13 of 19 Optocoupler--DIP Package OPIA600 through OPIA605 OPIA604 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/08 Page 14 of 19 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--DIP Package OPIA600 through OPIA605 OPIA604 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.3 11/08 Page 15 of 19 Optocoupler--DIP Package OPIA600 through OPIA605 OPIA605 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/08 Page 16 of 19 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--DIP Package OPIA600 through OPIA605 OPIA605 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.3 11/08 Page 17 of 19 Optocoupler--DIP Package OPIA600 through OPIA605 Quality / Reliability Requirements Failure Criteria Conditions 10% 11 samples after 500Hrs 0 Fail @ VCE = 5.0VDC, Ta = 70C 10% 50 samples after 96Hrs 0 Fail @ Max PD, Ta = 25C MTTF @ 90% confidence 150,000 Min. @ 25C, 25mADC Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020B Lead Solderability 0 Fail per Method 208 of MIL-STD-202. 125C Min. DSC test method Temperature Humidity-Bias 20% 85C, 85%RH, 500Hrs, 80% min Iceo Temperature Cycle 20% per Method 1010.7 of MIL-STD-883E High Temperature Storage 20% 85C, 500Hrs Autoclave 0 Fail TA = 121C, Pressure = 15psi, Humidity = 100%, Time = 96Hrs Parameter HTRB D IC(OFF) HTFB D IC(ON) Glass Transition of body Note: This is to be performed when a change occurs to form, fit or function. Government and Industry Standard Compliance Requirements European Union's Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC Label Identification Carrollton, TX, USA MADE IN TAIWAN DESCRIPTION: Size: 3" (7.4 cm) X 2.2" (5.5 cm) Lettering shall be black on white background. Format shall be as: Notes: 1. The DATE CODE is a 4-digit code for date of manufacture where YY is the last two digits of the year, and WW is week number of manufacture. 2. The LOT I.D. is the manufacturing location lot identification where Y is the year of manufacture, NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. - or use equivalent label format. OPTEK P/N __OPIA600D-TU__ IIIIIIIIIIIIIIIIIIIII QTY. ________N/A_________ IIIIIIIIIIIIIIIIIIIII DATE CODE _____(YYWW)___ IIIIIIIIIIIIIIIIIIIII LOT I.D. ____(Y-NNNNDDD)__ IIIIIIIIIIIIIIIIIIIII OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/08 Page 18 of 19 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Optocoupler--DIP Package OPIA600 through OPIA605 Packaging Information: Tube Optek's Optocoupler Part Numbers Packaging Quantities 4-PIN OPIA400D/A, OPIA410D/A P/H OPIA413D/A and 6-PIN SMD OPIA6XXD/A Series 8-PIN OPIA8XXD Series and OPID804D Inner 52 x 7 x 7.5 cm Qty Small Carton Medium Carton Large Carton 53.5 x 16 x 17.5 cm 53.5 x 30.7 x 17.5 cm 53.5 x 30.7 x 25 cm Weight Qty Weight Qty Weight Gross Weight Qty Weight Gross Weight Qty Gross Weight Weig ht 100 44 3,000 1.40 12,000 6.0 6.5 24,000 12.0 12.5 36,000 18.0 18.5 65 44 1,950 1.50 7,800 6.5 7.0 15,600 12.0 12.5 23,400 18.5 19.0 48 44 1,440 1.44 5,760 6.0 6.5 11,520 12.0 12.5 17,290 18.0 18.5 100 24 6,000 1.60 24,000 6.5 7.0 48,000 13.0 13.5 72,000 19.5 20.0 170 -- 10,200 -- M/F 4-PIN and 5-PIN OPIA401B - OPIA404B, OPIA414B, OPIA500B SOP 4-PIN SSOP OPIA405C - OPIA409C P/H = Pin-Hole Packages (Referred as D = Dual-In-Line Package) SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD) M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil LeadSpacing) SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing) Tube Packaging Specifications (TU): Quantity: 6-pin: 65pcs/tube OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.3 11/08 Page 19 of 19