Document Number: 28302 For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com
Revision: 11-Jul-12 1
Aluminum Capacitors
SMD (Chip) Long Life Vertical
153 CLV
Vishay BCcomponents
Not for New Design - Alternative Series 153 CRV
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FEATURES
Polarized aluminum electrolytic capacitors, non-solid
electrolyte, self healing
SMD-version with base plate, vertical construction
requiring minimum board space, reflow solderable
High CV per unit volume
Long useful life: 2000 h to 3000 h at 105 °C
Charge and discharge proof, no peak current limitation
Supplied in blister tape on reel
Lead (Pb)-free
ATTENTION: for maximum safe soldering conditions refer
to fig.4
APPLICATIONS
SMD technology, for high mounting density
Coupling, decoupling, smoothing, filtering, buffering,
timing
Telecommunications, general industrial, EDP, automotive,
portable and lightweight equipment
MARKING
Rated capacitance (in µF)
Rated voltage (in V)
Date code, in accordance with IEC 60062
Black mark or ‘’ sign indicating the cathode
(the anode is identified by bevelled edges)
Code indicating group number (V)
PACKAGING
Supplied in blister tape on reel
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes
(LxWxH in mm)
4.0 x 4.0 x 5.3
to 10 x 10 x 14
Rated capacitance range, CR0.47 µF to 1000 µF
Tolerance on CR± 20 %
Rated voltage range, UR6.3 V to 100 V
Category temperature range - 55 °C to + 105 °C
Endurance test at 105 °C:
Case sizes
4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 1000 h
Case sizes
8.0 x 8.0 x 6.5 to 10 x 10 x 14 2000 h
Useful life at 105 °C:
Case sizes
4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 2000 h
Case sizes
8.0 x 8.0 x 6.5 to 10 x 10 x 14 3000 h
Useful life at 40 °C; 1.3 x lR applied:
Case sizes
4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 200 000 h
Case sizes
8.0 x 8.0 x 6.5 to 10 x 10 x 14 300 000 h
Shelf life at 0 V, 105 °C 1000 h
Based on sectional specification IEC 60384-18/
CECC 32300
Climatic category IEC 60068 55/105/56
°
°
153 CRV
Lead (Pb)-free
153 CLV
140 CLH
150 CLZ
153 CLV
Vishay BCcomponents Aluminum Capacitors
SMD (Chip) Long Life Vertical
www.vishay.com For technical questions, contact: aluminumcaps1@vishay.com Document Number: 28302
2Revision: 11-Jul-12
Not for New Design - Alternative Series 153 CRV
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 1
Note
• Detailed tape dimensions see section ‘PACKAGING’.
SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm)
CR
(µF)
UR (V)
6.3101625355063100
0.47 - - - - - 4.0 x 4.0 x 5.3 - -
1.0 - - - - - 4.0 x 4.0 x 5.3 - -
2.2 - - - - - 4.0 x 4.0 x 5.3 - -
3.3 - - - - - 4.0 x 4.0 x 5.3 - -
4.7 - - - - 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 - -
10 - - 4.0 x 4.0 x 5.3 - 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 - -
22 4.0 x 4.0 x 5.3 - 5.0 x 5.0 x 5.3 - 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 - -
33 - 5.0 x 5.0 x 5.3 - 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 - 10 x 10 x 14
47 5.0 x 5.0 x 5.3 - 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 - 8.0 x 8.0 x 10 - -
100 6.3 x 6.3 x 5.3 - 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 - 10 x 10 x 10 10 x 10 x 14 -
--------
220 - 8.0 x 8.0 x 10 10 x 10 x 10 - - - - -
330 8.0 x 8.0 x 10 10 x 10 x 10 - 10 x 10 x 14 - - - -
470 10 x 10 x 10 - 10 x 10 x 14 - - - - -
680 - 10 x 10 x 14 - - - - - -
1000 10 x 10 x 14 - - - - - - -
TAPE AND REEL DIMENSIONS in millimeters AND PACKAGING QUANTITIES
CASE CODE PITCH
P1
TAPE WIDTH
W
TAPE THICKNESS
T2
REEL DIA.
PACKAGING
QUANTITY
PER REEL
0405 8 12 5.8 380 2000
0505 12 12 5.8 380 1000
0605 12 16 5.8 380 1000
0807 12 16 6.8 380 1000
0810 16 24 11.3 380 500
1010 16 24 11.3 380 500
1014 16 24 14.8 330 250
Document Number: 28302 For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com
Revision: 11-Jul-12 3
153 CLV
Aluminum Capacitors
SMD (Chip) Long Life Vertical Vishay BCcomponents
Not for New Design - Alternative Series 153 CRV
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 2
MOUNTING
The capacitors are designed for automatic placement on to
printed-circuit boards.
Optimum dimensions of soldering pads depend amongst
others on soldering method, mounting accuracy, print layout
and/or adjacent components.
For recommended soldering pad dimensions, refer to Fig.3
and Table 3.
SOLDERING
Soldering conditions are defined by the curve, temperature
versus time, where the temperature is that measured on the
soldering pad during processing.
For maximum conditions refer to Fig.4.
Any temperature versus time curve which does not exceed
the specified maximum curves may be applied.
AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION
SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE
GOOD SOLDERING CONNECTIONS. HOWEVER, THE
SPECIFIED MAXIMUM CURVES SHOULD NEVER BE
EXCEEDED.
Table 3
DIMENSIONS in millimeters AND MASS
NOMINAL
CASE SIZE
L xWxH
CASE
CODE Lmax. Wmax. Hmax. Ø D Bmax. SCMASS
(g)
4.0 x 4.0 x 5.3 0405 4.5 4.5 5.5 4.0 0.8 1.0 2.0 ± 0.2 0.13
5.0 x 5.0 x 5.3 0505 5.5 5.5 5.5 5.0 0.8 1.4 2.3 ± 0.2 0.20
6.3 x 6.3 x 5.3 0605 6.8 6.8 5.5 6.3 0.8 2.0 2.7 ±0.2 0.30
8.0 x 8.0 x 6.5 0807 8.6 8.6 6.8 8.0 0.8 2.3 3.4 ±0.2 0.50
8.0 x 8.0 x 10 0810 8.6 8.6 10.5 8.0 1.1 3.1 3.0 ±0.2 1.00
10 x 10 x 10 1010 10.6 10.6 10.5 10.0 1.1 4.7 3.3 ±0.2 1.30
10 x 10 x 14 1014 10.6 10.6 14.3 10.0 1.2 4.5 3.9 ±0.2 1.50
0.4 ± 0.2
WB
CS
L
C0.3 max.
Fig.2 Dimensional outline
Fig.3 Recommended solder pad dimensions
RECOMMENDED SOLDERING PAD
DIMENSIONS in millimeters
CASE CODE a b c
0405 2.6 1.6 1.0
0505 3.0 1.6 1.4
0605 3.5 1.6 1.9
0807 4.0 1.6 2.1
0810 3.5 2.5 3.0
1010 4.0 2.5 4.0
1014 4.3 2.5 4.0
280
260
240
220
200
180
160
140
120
100
80
0 50 100 150 200 250
Fig.4 Maximum temperature load during infrared reflow
soldering measured on the soldering pad
t (s)
T
PA D
(°C)
153 CLV
Vishay BCcomponents Aluminum Capacitors
SMD (Chip) Long Life Vertical
www.vishay.com For technical questions, contact: aluminumcaps1@vishay.com Document Number: 28302
4Revision: 11-Jul-12
Not for New Design - Alternative Series 153 CRV
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Unless otherwise specified, all electrical values in Table 4 apply at
Tamb =20C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
ORDERING EXAMPLE
Electrolytic capacitor 153 series
100 µF/25 V; ± 20 %
Nominal case size:
8 mm x 8 mm x 10 mm; taped on reel
Ordering code: MAL215366101E3
Former 12NC: 2222 153 66101
Table 4
ELECTRICAL DATA
SYMBOL DESCRIPTION
CR
rated capacitance at 100 Hz or 120 Hz,
tolerance ± 20 %
IR
rated RMS ripple current at 100 Hz or 120 Hz,
105 °C
IL2 max. leakage current after 2 minutes at UR
tan max. dissipation factor at 100 or 120 Hz
ESR equivalent series resistance at 100 kHz
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
(µF)
NOMINAL
CASE SIZE
L x W x H
(mm)
IR
105 °C
(mA)
IL2
2min
(mA)
tan
ESR
100 kHz
()
ORDERING CODE
MAL2153.......
6.3
22 4.0 x 4.0 x 5.3 21 3.0 0.30 8 63229E3
47 5.0 x 5.0 x 5.3 36 3.0 0.30 4 63479E3
100 6.3 x 6.3 x 5.3 61 6.3 0.30 2 63101E3
330 8.0 x 8.0 x 10 180 21 0.30 0.5 63331E3
470 10 x 10 x 10 320 30 0.30 0.3 63471E3
1000 10 x 10 x 14 400 63 0.24 0.24 63102E3
10
33 5.0 x 5.0 x 5.3 31 3.3 0.26 4 64339E3
220 8.0 x 8.0 x 10 180 22 0.26 0.5 64221E3
330 10 x 10 x 10 320 33 0.26 0.3 64331E3
680 10 x 10 x 14 380 68 0.19 0.24 64681E3
16
10 4.0 x 4.0 x 5.3 16 3.0 0.22 8 65109E3
22 5.0 x 5.0 x 5.3 28 3.5 0.22 4 65229E3
47 6.3 x 6.3 x 5.3 47 7.5 0.22 2.2 65479E3
100 8.0 x 8.0 x 6.5 110 16 0.22 1.2 65101E3
220 10 x 10 x 10 320 35 0.22 0.3 65221E3
470 10 x 10 x 14 370 75 0.16 0.25 65471E3
25
33 6.3 x 6.3 x 5.3 44 8.3 0.16 2.2 66339E3
47 8.0 x 8.0 x 6.5 110 12 0.16 1.2 66479E3
100 8.0 x 8.0 x 10 180 25 0.16 0.5 66101E3
330 10 x 10 x 14 300 83 0.14 0.27 66331E3
35
4.7 4.0 x 4.0 x 5.3 14 3.0 0.13 8 60478E3
10 5.0 x 5.0 x 5.3 23 3.5 0.13 4 60109E3
22 6.3 x 6.3 x 5.3 50 7.7 0.13 2.2 60229E3
33 8.0 x 8.0 x 6.5 110 12 0.13 1.2 60339E3
50
0.47 4.0 x 4.0 x 5.3 5 3.0 0.12 12 61477E3
1.0 4.0 x 4.0 x 5.3 7 3.0 0.12 12 61108E3
2.2 4.0 x 4.0 x 5.3 10 3.0 0.12 12 61228E3
3.3 4.0 x 4.0 x 5.3 12 3.0 0.12 12 61338E3
4.7 5.0 x 5.0 x 5.3 17 3.0 0.12 6 61478E3
10 6.3 x 6.3 x 5.3 26 5.0 0.12 3 61109E3
22 8.0 x 8.0 x 6.5 110 11 0.12 1.2 61229E3
33 8.0 x 8.0 x 10 180 17 0.12 0.5 61339E3
47 8.0 x 8.0 x 10 180 24 0.12 0.5 61479E3
100 10 x 10 x 10 320 50 0.12 0.3 61101E3
63 100 10 x 10 x 14 240 63 0.09 0.41 68101E3
100 33 10 x 10 x 14 170 33 0.07 0.65 69339E3
Document Number: 28302 For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com
Revision: 11-Jul-12 5
153 CLV
Aluminum Capacitors
SMD (Chip) Long Life Vertical Vishay BCcomponents
Not for New Design - Alternative Series 153 CRV
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage IEC 60384-18, subclause 4.14 Us1.15 x UR
Reverse voltage IEC 60384-18, subclause 4.16 Urev 1V
Current
Leakage current after 2 min at URIL2 0.01 x CR x URor 3 µA, whichever is greater
Inductance
Equivalent series inductance (ESL) case codes 0405 to 0605 typ. 10 nH
case codes 0807 to 1010 typ. 15 nH
case codes 1014 typ. 16 nH
CAPACITANCE (C)
- 40 - 20 0 20 40 60 80 100 120
1.1
1.0
0.9
0.8
0.7
C
C0
Fig.5 Typical multiplier of capacitance at 100 Hz or 120 Hz as a
function of ambient temperature
Tamb (°C)
C0 = Capacitance at 20 °C
1
2
2
1
Curve 1: 1 µF, 50 V
Curve 2: 100 µF, 6.3 V
Fig.6 Typical ESR as a function of frequency at 20 °C
f (kHz)
ESR
(Ω)
102
10
1
0.1
0.1 1 10 102 103
Curve 1: 22 µF, 6.3 V
Curve 2: 22 µF, 1 6 V
Curve 3: 22 µF, 2 5 V
EQUIVALENT SERIES RESISTANCE (ESR)
1
2
3
10
1
0.1
0.01
-1
- 60 - 40 - 20 0 20 40 60 80 100 120
Tamb(°C)
2
1
tan δ
DISSIPATION FACTOR (tan δ)
Curve 1: 1 µF, 50 V
Curve 2: 100 µF, 6.3 V
Fig.7 Typical dissipation factor (tan δ) at 100 Hz or 120 Hz as
a function of ambient temperature
Fig.8 Typical impedance as a function of frequency at 20 °C
f (kHz)
Z
(Ω)
102
10
1
0.1
0.1 1 10 102 103
IMPEDANCE (Z)
1
2
3
Curve 1: 22 µF, 6.3 V
Curve 2: 22 µF, 1 6 V
Curve 3: 22 µF, 2 5 V
153 CLV
Vishay BCcomponents Aluminum Capacitors
SMD (Chip) Long Life Vertical
www.vishay.com For technical questions, contact: aluminumcaps1@vishay.com Document Number: 28302
6Revision: 11-Jul-12
Not for New Design - Alternative Series 153 CRV
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RIPPLE CURRENT AND USEFUL LIFE
Table 5
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 80 90 100 110
lifetime multiplier
(1)
200
100
60
1.0
30
150
20
6.0
4.0
2.0
1.5
12
8.0
3.0
Tamb (°C)
IA
IR
CCC206
IA = actual ripple current at 100 Hz or 120 Hz
IR = rated ripple current at 100 Hz or 120 Hz
at 105 °C
For case codes 0405 to 1010 max. IA/IR = 2.4
(1) Useful life at 105 °C and IR applied:
case codes 0405 to 0605: 2000 h
case codes 0807 to 1014: 3000 h
Fig.9 Multiplier of useful life as a function of ambient temperature and ripple current load
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY
(Hz)
IR MULTIPLIER
UR=6.3V to16V U
R=25V or35V U
R= 50 V to 100 V
50 or 60 0.80 0.80 0.80
100 or 120 1.00 1.00 1.00
300 1.10 1.15 1.20
1000 1.15 1.25 1.35
3000 1.20 1.35 1.45
10 000 1.25 1.40 1.50
Document Number: 28302 For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com
Revision: 11-Jul-12 7
153 CLV
Aluminum Capacitors
SMD (Chip) Long Life Vertical Vishay BCcomponents
Not for New Design - Alternative Series 153 CRV
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 6
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Mounting IEC 60384-18,
subclause 4.3
shall be performed prior to tests mentioned
below;
reflow soldering;
for maximum temperature load
refer to chapter “Mounting”
C/C:± 10 %
tan spec. limit
IL2 spec. limit
Endurance IEC 60384-18/
CECC 32300,
subclause 4.15
Tamb = 105 C; UR applied;
1000 h, case codes 0405 to 0605
2000 h, case codes 0807 to 1014
C/C: ± 20 %
tan 2 x spec. limit
IL2 spec. limit
Useful life CECC 30301,
subclause 1.8.1
Tamb = 105 C; UR and IR applied;
2000 h, case codes 0405 to 0605
3000 h, case codes 0807 to 1014
C/C: ± 50 %
tan 3 x spec. limit
IL2 spec. limit
no short or open circuit
total failure percentage: 1 %
Shelf life
(storage at high
temperature)
IEC 60384-18/
CECC 32300,
subclause 4.17
Tamb = 105 C; no voltage applied;
1000 h
after test: UR to be applied for 30 min,
24 h to 48 h before measurement
for requirements
see ‘Endurance test’ above
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
