40 Industrial Way East, Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212, Fax: (732) 460-0214
www.aeroflex.com/acc, email: acc-sales@aeroflex.com
Parameter Specification Units
Frequency Range 12 – 18 GHz
Insertion Loss (max) 3.9 dB
VSWR (max) 50 ohms 2.0 ratio
Isolation (min) 65 dB
Switching Speed (max) 100 nsec
CW RF Power, Operating (max) 0.5 W
Specifications:
Features:
Incorporated TTL-compatible driver for
convenient system integration and operates
from +5V and -15V DC power supplies.
DC blocks at all RF ports.
Ruggedized construction.
RoHS-compliant versions available.
Hermetic versions available.
Revision Date: 1/25/2011
S6K2 Pin Diode Switch
Single Pole, Six Throw
Absorptive
Notes:
DC Bias: +5V +/-0.5V @ 240 mA max
(Standard) -15V +/-3V @ 50 mA max
DC Bias: +5V +/-0.5V @ 300 mA max
(-5 option) -5V +/-0.5V @ 60 mA max
DC Bias: +15V +/-3V @ 240 mA max
(-12 option) -15V +/-3V @ 50 mA max
Control: TTL 0 = Low Loss E1 controls J2 – J1
TTL 1 = Isolation E2 controls J3 – J1
E3 controls J4 – J1
E4 controls J5 – J1
E5 controls J6 – J1
E6 controls J7 – J1
Absorptive Switch: 50 ohm termination present at J2, J3, J4, J5, J6
and J7 (in isolation mode).
Switching speed is defined as 50% TTL to 90% RF (t-on) and 50%
TTL to 10% RF (t-off).
Environmental Specifications:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp: -55 °C to +85 °C
Storage Temp: -65 °C to +125 °C
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration: MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Temperature Cycle: MIL-STD-202F, M105C, Cond D
Mechanical Specifications:
Case Styles: S6 Outline (Six bit control)
S6-3 Outline (Three bit control)
Finish: Gold Plate per MIL-G-45204
Bias & Control Pins: ø0.02” x 0.15” long
Weight: 65 g max
Mounting: ø0.10” through holes
(2) places
Three Bit Control:
(-3 option)
Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65 °C to +100 °C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked per
MIL-STD-883, Method 1014.
Optional High-Rel screening available upon request. Contact the
factory to discuss your screening requirements.
E3 E2 E1 Low Loss Path
0 0 0 J2 - J1
0 0 1 J3 - J1
0 1 0 J4 - J1
0 1 1 J5 - J1
1 0 0 J6 - J1
1 0 1 J7 - J1
1 1 0 ALL OFF
1 1 1 ALL OFF
Aeroflex Control Components reserves the right to make changes to any products
and services herein at any time without notice. Consult Aeroflex or an authorized
sales representative to verify that the information in this data sheet is current before
using this product. Aeroflex does not assume any responsibility or liability arising
out of the application or use of any product or service described herein, except as
expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a
product or service from Aeroflex convey a license under any patent rights, copyrights,
trademark rights, or any other of the intellectual rights of Aeroflex or of third parties.
Copyright 2011 Aeroflex Control Components. All rights reserved.
www.aeroex.com/Microwave www.aeroex.com/ACC
Aeroflex Control Components
Aeroflex Microelectronic Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Fax: (732) 460-0214
Sales
Phone: (732) 460-0212
ACC-sales@aeroflex.com
ISO 9001:2008 certified
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
Revision Date: 1/25/2011
Outline Drawing:
OUTLINE CASE STYLE S6 OUTLINE CASE STYLE S6-3
1.50
0.75
45°
TYP
A
A
0.38
REF.
1.50
0.75
0.07
1.360
0.28
0.560
0.60
7X
0.35
0.31
TYP
2X
Ø0.100 THRU
MOUNTING HOLE
VIEW A-A
L
C
0.055
(8) PLCS.
0.12
0.10
1.50
0.75
45°
TYP
9X
Ø0.020 X 0.15 LG
SOLDER PIN
A
A
0.38
REF.
1.50
0.75
0.07
1.360
0.28
0.560
0.60
7X
0.35
0.31
TYP
2X
Ø0.100 THRU
MOUNTING HOLE
SMA FEMALE,
FIELD REPLACEABLE
(Ø0.015 X 0.08 PIN)
(7) PLCS.
VIEW A-A
L
C
0.055
(8) PLCS.
0.12
0.10 9X
Ø0.020 X 0.15 LG
SOLDER PIN
SMA FEMALE,
FIELD REPLACEABLE
(Ø0.015 X 0.08 PIN)
(7) PLCS.
J1
J2
J3
J4
J5
J6
J7
E1
E2
-V
G
+V
E6
E4
E5
E3
J1
J2
J3
J4
J5
J6
J7
E1
E2
-V
G
+V
N/C
N/C
N/C
E3
ACC
SN:
0000
DC:
WWYY
ACC
SN:
0000
DC:
WWYY
MODEL NUMBER
MODEL NUMBER
Part Number Ordering Information:
Add “-RC” suffix: RoHS-compliant
Add “-H” suffix: Hermetic seal
Add “-5” suffix: +/-5V DC supplies
Add “-5-RC” suffix: +/-5V DC supplies, RoHS-compliant
Add “-5-H” suffix: +/-5V DC supplies, Hermetic seal
Add “-12” suffix: +/-15V DC supplies
Add “-12-RC” suffix: +/-15V DC supplies, RoHS-compliant
Add “-12-H” suffix: +/-15V DC supplies, Hermetic seal
Add “-3” suffix: Three bit logic control
Add “-3-RC” suffix: Three bit logic control, RoHS-compliant
Add “-3-H” suffix: Three bit logic control, Hermetic seal
Add “-3-5” suffix: Three bit logic control, +/-5V DC supplies
Add “-3-5-RC” suffix: Three bit logic control, +/-5V DC supplies,
RoHS-compliant
Add “-3-5-H” suffix: Three bit logic control, +/-5V DC supplies,
Hermetic seal
Add “-3-12” suffix: Three bit logic control, +/-15V DC supplies
Add “-3-12-RC” suffix: Three bit logic control, +/-15V DC
supplies, RoHS-compliant
Add “-3-12-H” suffix: Three bit logic control, +/-15V DC supplies,
Hermetic seal