Philips Semiconductors Product specification
Triacs BT136S series D
logic level BT136M series D
GENERAL DESCRIPTION QUICK REFERENCE DATA
Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. UNIT
triacsinaplasticenvelopesuitablefor
surface mounting, intended for use in BT136S (or BT136M)- 500D 600D
general purpose bidirectional VDRM Repetitive peak off-state 500 600 V
switching and phase control IT(RMS) voltages 4 4 A
applications. These devices are ITSM RMS on-state current 25 25 A
intended to be interfaced directly to Non-repetitive peak on-state current
microcontrollers, logic integrated
circuits and other low power gate
trigger circuits.
PINNING - SOT428 PIN CONFIGURATION SYMBOL
PIN Standard Alternative
NUMBER S M
1 MT1 gate
2 MT2 MT2
3 gate MT1
tab MT2 MT2
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
-500 -600
VDRM Repetitive peak off-state - 50016001V
voltages
IT(RMS) RMS on-state current full sine wave; Tmb ≤ 107 ˚C - 4 A
ITSM Non-repetitive peak full sine wave; Tj = 25 ˚C prior to
on-state current surge
t = 20 ms - 25 A
t = 16.7 ms - 27 A
I2tI
2
t for fusing t = 10 ms - 3.1 A2s
dIT/dt Repetitive rate of rise of ITM = 6 A; IG = 0.2 A;
on-state current after dIG/dt = 0.2 A/µs
triggering T2+ G+ - 50 A/µs
T2+ G- - 50 A/µs
T2- G- - 50 A/µs
T2- G+ - 10 A/µs
IGM Peak gate current - 2 A
VGM Peak gate voltage - 5 V
PGM Peak gate power - 5 W
PG(AV) Average gate power over any 20 ms period - 0.5 W
Tstg Storage temperature -40 150 ˚C
TjOperating junction - 125 ˚C
temperature
1
2
3
tab
T1T2
G
1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may
switch to the on-state. The rate of rise of current should not exceed 3 A/µs.
July 1997 1 Rev 1.000
Philips Semiconductors Product specification
Triacs BT136S series D
logic level BT136M series D
THERMAL RESISTANCES
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
Rth j-mb Thermal resistance full cycle - - 3.0 K/W
junction to mounting base half cycle - - 3.7 K/W
Rth j-a Thermal resistance pcb (FR4) mounted; footprint as in Fig.14 - 75 - K/W
junction to ambient
STATIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
IGT Gate trigger current VD = 12 V; IT = 0.1 A T2+ G+ - 2.0 5 mA
T2+ G- - 2.5 5 mA
T2- G- - 2.5 5 mA
T2- G+ - 5.0 10 mA
ILLatching current VD = 12 V; IGT = 0.1 A T2+ G+ - 1.6 10 mA
T2+ G- - 4.5 15 mA
T2- G- - 1.2 10 mA
T2- G+ - 2.2 15 mA
IHHolding current VD = 12 V; IGT = 0.1 A - 1.2 10 mA
VTOn-state voltage IT = 5 A - 1.4 1.70 V
VGT Gate trigger voltage VD = 12 V; IT = 0.1 A - 0.7 1.5 V
VD = 400 V; IT = 0.1 A; Tj = 125 ˚C 0.25 0.4 - V
IDOff-state leakage current VD = VDRM(max); Tj = 125 ˚C - 0.1 0.5 mA
DYNAMIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
dVD/dt Critical rate of rise of VDM = 67% VDRM(max); Tj = 125 ˚C; - 5 - V/µs
off-state voltage exponential waveform; RGK = 1 kΩ
tgt Gate controlled turn-on ITM = 6 A; VD = VDRM(max); IG = 0.1 A; - 2 - µs
time dIG/dt = 5 A/µs
July 1997 2 Rev 1.000
Philips Semiconductors Product specification
Triacs BT136S series D
logic level BT136M series D
Fig.1. Maximum on-state dissipation, P
tot
, versus rms
on-state current, I
T(RMS)
, where
α
= conduction angle.
Fig.2. Maximum permissible non-repetitive peak
on-state current I
TSM
, versus pulse width t
p
, for
sinusoidal currents, t
p
≤
20ms.
Fig.3. Maximum permissible non-repetitive peak
on-state current I
TSM
, versus number of cycles, for
sinusoidal currents, f = 50 Hz.
Fig.4. Maximum permissible rms current I
T(RMS)
,
versus mounting base temperature T
mb
.
Fig.5. Maximum permissible repetitive rms on-state
current I
T(RMS)
, versus surge duration, for sinusoidal
currents, f = 50 Hz; T
mb
≤
107˚C.
Fig.6. Normalised gate trigger voltage
V
GT
(T
j
)/ V
GT
(25˚C), versus junction temperature T
j
.
012345
0
1
2
3
4
5
6
7
8
= 180
120
90
60
30
BT136
IT(RMS) / A
Ptot / W Tmb(max) / C
125
122
119
116
113
110
107
104
101
1
-50 0 50 100 150
0
1
2
3
4
5BT136
Tmb / C
IT(RMS) / A
107 C
10us 100us 1ms 10ms 100ms
10
100
1000 BT136
T / s
ITSM / A
TITSM
time
I
Tj initial = 25 C max
T
dI /dt limit
T
T2- G+ quadrant
0.01 0.1 1 10
0
2
4
6
8
10
12 BT136
surge duration / s
IT(RMS) / A
1 10 100 1000
0
5
10
15
20
25
30 BT136
Number of cycles at 50Hz
ITSM / A
TITSM
time
I
Tj initial = 25 C max
T
-50 0 50 100 150
0.4
0.6
0.8
1
1.2
1.4
1.6 BT136
Tj / C
VGT(Tj)
VGT(25 C)
July 1997 3 Rev 1.000
Philips Semiconductors Product specification
Triacs BT136S series D
logic level BT136M series D
Fig.7. Normalised gate trigger current
I
GT
(T
j
)/ I
GT
(25˚C), versus junction temperature T
j
.
Fig.8. Normalised latching current I
L
(T
j
)/ I
L
(25˚C),
versus junction temperature T
j
.
Fig.9. Normalised holding current I
H
(T
j
)/ I
H
(25˚C),
versus junction temperature T
j
.
Fig.10. Typical and maximum on-state characteristic.
Fig.11. Transient thermal impedance Z
th j-mb
, versus
pulse width t
p
.
Fig.12. Typical, critical rate of rise of off-state voltage,
dV
D
/dt versus junction temperature T
j
.
-50 0 50 100 150
0
0.5
1
1.5
2
2.5
3BT136D
Tj / C
T2+ G+
T2+ G-
T2- G-
T2- G+
IGT(Tj)
IGT(25 C)
0 0.5 1 1.5 2 2.5 3
0
2
4
6
8
10
12 BT136
VT / V
IT / A
Tj = 125 C
Tj = 25 C typ max
Vo = 1.27 V
Rs = 0.091 ohms
-50 0 50 100 150
0
0.5
1
1.5
2
2.5
3TRIAC
Tj / C
IL(Tj)
IL(25 C)
10us 0.1ms 1ms 10ms 0.1s 1s 10s
0.01
0.1
1
10 BT136
tp / s
Zth j-mb (K/W)
unidirectional
bidirectional
tp
P
t
D
-50 0 50 100 150
0
0.5
1
1.5
2
2.5
3TRIAC
Tj / C
IH(Tj)
IH(25C)
0 50 100 150
1
10
100
1000
Tj / C
dVD/dt (V/us)
July 1997 4 Rev 1.000
Philips Semiconductors Product specification
Triacs BT136S series D
logic level BT136M series D
MECHANICAL DATA
Dimensions in mm
Net Mass: 1.1 g
Fig.13. SOT428 : centre pin connected to tab.
MOUNTING INSTRUCTIONS
Dimensions in mm
Fig.14. SOT428 : minimum pad sizes for surface mounting
.
Notes
1. Plastic meets UL94 V0 at 1/8".
6.22 max
2.38 max
0.93 max
6.73 max
0.3
10.4 max
0.5
0.8 max
(x2)
2.285 (x2)
0.5
seating plane
1.1
0.5 min
5.4
4 min
4.6
1
2
3
tab
7.0
7.0
2.15
2.5
4.57
1.5
July 1997 5 Rev 1.000
Philips Semiconductors Product specification
Triacs BT136S series D
logic level BT136M series D
DEFINITIONS
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Philips Electronics N.V. 1997
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
July 1997 6 Rev 1.000
Philips Semiconductors: Product information o... Page 1 of 2
file:\\Roarer\root\data13\imaging\BITTING\cpl_mismatch\20000817\08162000_3\PHGL\08112000\BT136S-600D.html
8/18/00
Go to Philips
Select & Go...
Catalog & Datasheets
Catalog by Function
-
Discrete
semiconductors
-
Audio
-
Clocks and Watches
-
Data communications
-
Microcontrollers
-
Peripherals
-
Standard analog
-
Video
-
Wired communications
-
Wireless
communications
Catalog by System
-
Automotive
-
Consumer Multimedia
Systems
-
Communications
-
PC/PC-peripherals
Cross reference
Models
Packages
Application notes
Selection guides
Other technical
documentation
End of Life information
Datahandbook system
Relevant Links
-
About catalog tree
-
About search
-
About this site
-
Subscribe to eNews
-
Catalog & Datasheets
-
Search
-
Products
BT136S series
D; BT136M series D
-
Download
BT136S series
D; BT136M series D
Product INFOrmation page
Information as of 2000-08-08
BT136S series D; BT136M series D; Triacs logic level
• Description
• Datasheet
• Products, packages, availability and ordering
• Find similar products
To be kept informed on BT136S series D; BT136M series D,
Description
Glass passivated, sensitive gate triacs in a plastic envelope suitable for surface mounting,
intended for use in general
purpose bidirectional switching and phase control applications.
These devices are intended to be interfaced directly
to microcontrollers
circuits and other low power gate trigger circuits.
Datasheet
Type nr.Title
Publication
release
date Datasheet
status
Page
count
BT136S
series
D;
BT136M
series
D
Triacs logic level 01-Jul-97 Product
Specification
6
Products, packages, availability and ordering
Partnumber North
American
Partnumber
Order code
(12nc) marking/packing
package
BT136S-600D BT136S-600D
T/R 9340 492 90118
Standard
Marking * Reel
Pack, SMD,
13"
SOT428
Please read
information about some discontinued variants of this product
Find similar products:
Products
BT136S series D; BT136M series D
links to the similar products page containing an
Philips Semiconductors: Product information o... Page 2 of 2
file:\\Roarer\root\data13\imaging\BITTING\cpl_mismatch\20000817\08162000_3\PHGL\08112000\BT136S-600D.html
8/18/00
overview of products that
are similar in function or related to the part number(s) as listed on
this page. The similar products page includes
products from the same catalog tree(s) ,
relevant selection guide
s and products from the same functional category.
Copyright © 2000
Royal Philips Electronics
All rights reserved.
Terms and conditions.
