DC/DC Converters TEN 25 Series, 25/30 Watt Features Wide 2:1 Input Range Very high Efficiency up to 89% Extended Operating Temperature Range -40C to +85C Adjustable Output Voltage Remote On/Off Continuous Short Circuit Protection Over Voltage Protection I/O-Isolation 1500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components 3 Year Product Warranty The TEN 25 series is a range of isolated DC/DC converters with high power density in a 51x41x9.5mm shielded metal case. All 18 models have a wide 2:1 input voltage range. The very high efficiency allows a safe operating temperature range of -40C to +85C. Other features are internal EMI-filter to meet EN55022, class A and remote On/Off. Typical applications for these converter modules are industrial electronics, communication systems, battery operated equipment and distributed power systems. Models Ordercode Output voltage Output current max. Efficiency typ. TEN 25-1210WI 3.3 VDC 5'500 mA 81 % TEN 25-1211WI 5 VDC 5`000 mA 84 % 12 VDC 2`500 mA 88 % 15 VDC 2`000 mA 88 % TEN 25-1222WI 12 VDC 1`250 mA 88 % TEN 25-1223WI 15 VDC 1`000 mA 88 % TEN 25-2410WI 3.3 VDC 5'500 mA 82 % TEN 25-2411WI 5 VDC 5`000 mA 85 % 12 VDC 2`500 mA 89 % 15 VDC 2`000 mA 89 % TEN 25-2422WI 12 VDC 1`250 mA 89 % TEN 25-2423WI 15 VDC 1`000 mA 89 % TEN 25-4810WI 3,3 VDC 5'500 mA 82 % TEN 25-4811WI 5 VDC 5`000 mA 85 % TEN 25-1212WI TEN 25-1213WI TEN 25-2412WI TEN 25-2413WI TEN 25-4812WI Input voltage range 9 - 18 VDC 18 - 36 VDC 12 VDC 2`500 mA 89 % 15 VDC 2`000 mA 89 % TEN 25-4822WI 12 VDC 1`250 mA 89 % TEN 25-4823WI 15 VDC 1`000 mA 89 % TEN 25-4813WI http://www.tracopower.com 36 - 75 VDC Page 1 of 3 DC/DC Converters TEN 25 Series, 25/30 Watt Input Specifications Input current no load Input current (full load) 12 Vin models: 40 mA max. 24 Vin models: 20 mA max. 48 Vin models: 10 mA max. 12 Vin; 12 Vin; 24 Vin; 24 Vin; 48 Vin; 48 Vin; 3.3/ 5 Vout other output 3.3/ 5 Vout other output 3.3/ 5 Vout other output models: 1870 mA typ. / 2480 mA typ. models: 2840 mA typ. models: 920 mA typ. / 1220 mA typ. models: 1400 mA typ. models: 460 mA typ. / 610 mA typ. models: 700 mA typ. Start-up voltage / under voltage shut down 12 Vin models: 8.8 VDC / 8.3 VDC typ. 24 Vin models: 17.5 VDC / 16.5 VDC typ. 48 Vin models: 35.0 VDC / 33.0 VDC typ. Surge voltage (1000 msec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max.. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 class A, FCC part 15, level A Output Specifications Voltage set accuracy 1% Output voltage adj. range 10% Regulation - - - - - Input variation Vin min. to Vin max. Load variation 10 - 100 % single output models dual output models balanced load dual output models unbalanced load 0.3 % max. 0.5 % max. 1.0 % max. 2.0 % max. Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Temperature coefficient 0.02 %/K Output current limitation > 110% of Iout max., constant current Short circuit protection indefinite, automatic recovery Capacitive load 3.3 & 5 Vout models: 10'000 F 12 &15 Vout models: 1'000 F dual output models: 330 F General Specifications Temperature ranges - Operating - Case temperature - Storage - 40 C ... + 85 C + 100 C max. - 55 C ... + 125 C Load derating 2.5%/K above 60C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) > 1'000'000 h @ + 25 C Isolation voltage - Input/Output 1`500 VDC Isolation capacity - Input/Output 1200 pF typ. Isolation resistance - Input/Output (500 VDC) > 1'000 MOhm Switching frequency (fixed) Remote On/Off: 330 kHz typ. (puls width modulation) - On: - OFF: - Standby current: 2.5...100 VDC or open circuit. -0.7...1.0 VDC or short circuit pin 3 and pin 2 100A max. Safety standards UL /cUL 60950, IEC/EN 60950 compliance up to 60 VDC input voltage (SELV limit) Safety approvals CSA (File no.: 226037) All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 25 Series, 25/30 Watt Physical Specifications Case material copper, nickel plated Baseplate non conductive FR4 Potting material silicon rubber (UL 94 V-0 rated) Weight 48g (1.69oz) Soldering temperature max. 265C / 10 sec. Output Voltage Adjustments +Vout +Vout Trim Rx 10K Pot. Trim Rx = -Vout Rx Trim -Vout 36.667 x Vo -- 33 x Vn Vn -- Vo Rx = 33 x Vn -- 30 x Vo Vo -- Vn Vo = adjusted output voltage [VDC] Vn = nominal output voltage [VDC] Rx = trim resistor [Kohm] Nominal output voltage at open Trim input. 9.5 (0.24) (0.38) 45.72 2.5 (1.8) (0.1) (0.5) (0.2) 4 12.7 (0.4) 2 1 5.08 5 Bottom view Pin-Out 10.16 3 (0.4) (0.4) 6 (0.4) 10.16 10.16 10.16 5.1 6 7 (0.2) (1.6) 40.6 Outline Dimensions 50.8 Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) 3 Remote On/Off 4 No pin + Vout 5 + Vout Common 6 -Vout -Vout 7 Trim (2.0) Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.04 0.002) Pin pitch tolerances: 0.25 (0.01) Case tolerances: 0.5 (0.02) Specifications can be changed without notice Rev. 10/05 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com Page 3 of 3