MAAM-011117 75 , 5 V RF Amplifier 50 - 2700 MHz Rev. V3 Functional Schematic Features Low Power Consumption: 5 V, 85 mA. 16 dB Flat Gain: 50 MHz - 2700 MHz Low Noise: 2.7 dB Power Down Control: IDD < 4 mA Current Adjust Low Distortion Performance Lead-Free 2 mm PDFN-8LD Plastic Package Halogen-Free "Green" Mold Compound RoHS* Compliant N/C N/C VCTRL N/C Description N/C The MAAM-011117 provides high gain, low noise and low distortion amplification for 75 customer premises equipment (CPE). The MAAM-011117 incorporates a power-down function to reduce the overall current consumption to less than 4 mA for standby operation. 8 RFOUT IADJ 1 RFIN Pin Configuration3 Pin No. Pin Name Description 1 IADJ Current Control 2 N/C No Connection 3 VCTRL Power Down LO: 0 V; HI: 3.3 V 4 N/C No Connection 5 RFIN RF Input (75 ) 6 N/C No Connection The MAAM-011117 is packaged in a 2 mm 8-lead package and requires a minimal number of off-chip components resulting in a highly integrated low cost solution. 1,2 Ordering Information Part Number Package 7 N/C No Connection MAAM-011117-TR3000 3000 piece reel 8 RFOUT RF Output (75 ) MAAM-011117-001SMB Sample Board 9 Paddle4 RF and DC Ground 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 3. MACOM recommends connecting unused package pins to ground. 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011117 75 , 5 V RF Amplifier 50 - 2700 MHz Rev. V3 Electrical Specifications: TA = 25C, Freq: 50 - 2700 MHz, VDD = +5 Volts, Z0 = 75 Parameter Test Conditions Units Min. Typ. Max. Gain -- dB 14.7 16 17.2 Gain Flatness dB -- dB -- dB -- 0.5 2.7 3.0 20 -- Reverse Isolation -- 50 MHz - 1.2 GHz 1.2 GHz - 2.7 GHz -- Input Return Loss -- dB -- 12 -- Noise Figure Output Return Loss -- -- -- dB -- 16 -- Swept frequency: 50 MHz - 870 GHz, IM Tone at 100 MHz dBm -- 58 -- Input tones at 2.5 GHz and 2.6 GHz, IM Tone at 100 MHz dBm -- 45 -- Input tones at 1.0 GHz and 1.1 GHz, Input Power = -15 dBm, Output tone 2.1 GHz dBm -- 50 -- Output IP35 Swept frequency from 50 MHz - 870 MHz Swept frequency from 870 MHz - 2 GHz Swept frequency from 2.0 - 2.7 GHz dBm -- 35 30 26 -- Composite Triple Beat, CTB 79 Channels, +15 dBmV / Channel at I/P dBc -- -75 -- Composite Second Order, CSO 79 Channels, +15 dBmV / Channel at I/P dBc -- -65 -- Cross Modulation, XMOD 79 Channels, +15 dBmV / Channel at I/P dBc -- -65 -- Output P1dB 1 GHz dBm -- 19.5 -- IDD Power Up: VDD = 5 V, VCTRL = 3.3 V Power Down: VDD = 5 V, VCTRL = 0 V mA -- 85 3.5 105 -- Output IP25 5. Measured with two tones, 100 MHz spacing, -15 dBm input power per tone. Absolute Maximum Ratings6,7,8 VCTRL Logic Voltages (VDD = +5 V) Parameter Units Min Typ Max Parameter Absolute Maximum VCTRL Logic Low V -0.5 0 0.2 Input Power 7 dBm VCTRL Logic High V 1.2 3.3 3.47 Operating Voltage 10 volts ICTRL Logic Low mA -0.5 -- 1 Operating Temperature -40C to +85C ICTRL Logic High mA -0.5 -- 1 Storage Temperature -65C to +150C Handling Procedure - Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these HBM Class 0A, CDM Class II devices. 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. MACOM does not recommend sustained operation near these survivability limits. 8. Junction Temperature (TJ) = TC + jc * (V * I) Typical thermal resistance (jc) = 73 CW. a) For TC = +25C, TJ = 57C @ 5 V, 85 mA b) For TC = +85C, TJ = 117C @ 5 V, 85 mA 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011117 75 , 5 V RF Amplifier 50 - 2700 MHz Rev. V3 Schematic Including Off-Chip Components Recommended Board Layout Parts List9 PCB Land Pattern 2x2mm PDFN, 8-LEAD Metal Solder Mask 1.0 Solder mask extended 0.05mm on pads 0.3 2mm Outline 0.25 0.50 2.5 0.50 Thermal/GND Pad 10 vias 0.2-0.3 Solder mask reduced 0.05mm on GND pad Component Value Package C1 - C3 10 nF 0402 C4 220 pF 0402 C5 0.7 pF 0402 C6 0.2 pF 0402 C7 100 nF 0603 C8 1 F 0603 R1 510 0402 R2 510 k 0402 L1 Ferrite Bead 0402 L2 3.0 nH 0402 L3 3.3 nH 0402 9. Ferrite Bead from Murata, part number BLM15HD182SN. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011117 75 , 5 V RF Amplifier 50 - 2700 MHz Rev. V3 Typical Performance Curves: VDD = +5 V; IDD = 85 mA, Power-Up Mode Gain to 5 GHz Gain to 2.7 GHz 20 20 +25 C -40 C +85 C 19 18 10 17 5 16 S21 (dB) S21 (dB) +25 C -40 C +85 C 15 15 14 0 -5 13 -10 12 -15 11 10 -20 0.0 0.3 0.6 0.9 1.2 1.5 1.8 Frequency (GHz) 2.1 2.4 2.7 Input Return Loss 0.0 4.0 5.0 0 +25 C -40 C +85 C -5 +25 C -40 C +85 C -5 -10 S22 (dB) S11 (dB) 2.0 3.0 Frequency (GHz) Output Return Loss 0 -15 -20 -10 -15 -20 -25 -25 0.0 0.3 0.6 0.9 1.2 1.5 1.8 Frequency (GHz) 2.1 2.4 2.7 Noise Figure 0.0 0.3 0.6 0.9 1.2 1.5 1.8 Frequency (GHz) 2.1 2.4 2.7 2.1 2.4 2.7 Reverse Isolation 0 8 7 +25 C -40 C +85 C -5 +25 C -40 C +85 C 6 -10 5 S12 (dB) Noise Figure (dB) 1.0 4 3 -15 -20 2 -25 1 -30 0 0.0 4 0.3 0.6 0.9 1.2 1.5 Frequency (GHz) 1.8 2.1 2.4 2.7 0.0 0.3 0.6 0.9 1.2 1.5 1.8 Frequency (GHz) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011117 75 , 5 V RF Amplifier 50 - 2700 MHz Rev. V3 Typical Performance Curves: VDD = +5 V; IDD = 85 mA, Power-Up Mode CSO Upper 79ch, +15 dBmV/ch Flat Input Power CSO Lower 79ch, +15 dBmV/ch Flat Input Power 95 95 +25 C +85 C -40 C 90 85 CSO Upper (dBc) CSO Lower (dBc) 85 +25 C +85 C -40 C 90 80 75 80 75 70 70 65 65 60 60 0 100 200 300 400 Frequency (MHz) 500 600 CTB 79ch, +15 dBmV/ch Flat Input Power 0 100 200 300 400 Frequency (MHz) 500 600 500 600 Cross Modulation 79ch, +15 dBmV/ch Flat Input Power 90 80 +25 C +85 C -40 C 85 +25 C +25 C -40 C 75 XMOD (dBc) CTB (dBc) 80 75 70 65 70 60 65 55 60 0 100 200 300 400 Frequency (MHz) 500 600 0 100 200 300 400 Frequency (MHz) 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011117 75 , 5 V RF Amplifier 50 - 2700 MHz Rev. V3 Lead Free 2 mm 8-lead PDFN Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. Reference JEDEC MO-229 for additional dimensional and tolerance information All dimensions shown as in/mm 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAAM-011117 75 , 5 V RF Amplifier 50 - 2700 MHz Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support