https://www.phoenixcontact.com/us/products/2717029
12/4/13Page1/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Sensor/actuator terminal block, Cross section: 0.2 mm²-4 mm², AWG:24-12, Connection type:Screw
connection, Width:6.2 mm, Color:gray, Mounting type:NS 35/7,5,NS 35/15
Product Features
Same shape as DIK ... three-level initiator terminal blocks
Terminal blocks with red and green LEDs are available for optical signaling of the initiator and actuator wiring
The forks of the insertion bridge can be easily loosened for bridging between non-adjacent terminal blocks
The upper level contains the feed-through connections for the signal cable which can be labeled
Because the spine of the insertion bridge can be snapped into place with the terminal block housing, all the terminal points can be wired freely and
the bridge can be securely positioned
Unlike the DIK terminal blocks, the lower level of these output terminal blocks makes direct contact with the DIN rail and as a PE connection are
marked yellow-green
Alternate wiring of an actuator followed by an initiator is easy
The middle level supplies the connected actuators with power
Key commercial data
Packing unit 1 PCE
GTIN
Weight per Piece (excluding packing) 16.69 GRM
Custom tariff number 85369010
Country of origin Poland
Technical data
General
Number of levels 3
Number of connections 4
Color gray
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page2/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Technical data
General
Insulating material PA
Inflammability class according to UL 94 V2
Rated surge voltage 4 kV
Pollution degree 3
Surge voltage category III
Insulating material group I
Connection in acc. with standard IEC 60947-7-1
Nominal current IN24 A
Nominal voltage UN250 V (the voltage is determined by the light indicator.)
Open side panel nein
Dimensions
Width 6.2 mm
Length 61.5 mm
Height NS 35/7,5 54.5 mm
Height NS 35/15 62 mm
Connection data
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 12
Conductor cross section stranded, with ferrule without plastic sleeve min. 0.25 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min. 0.25 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm²
2 conductors with same cross section, solid min. 0.2 mm²
2 conductors with same cross section, solid max. 1 mm²
2 conductors with same cross section, stranded min. 0.2 mm²
2 conductors with same cross section, stranded max. 1 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min. 0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max. 1 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, min. 0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, max. 1 mm²
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page3/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Technical data
Connection data
Cross section with insertion bridge, solid max. 4 mm²
Cross section with insertion bridge, stranded max. 2.5 mm²
Connection method Screw connection
Stripping length 8 mm
Internal cylindrical gage A3
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Classifications
eCl@ss
eCl@ss 4.0 27141118
eCl@ss 4.1 27141118
eCl@ss 5.0 27141118
eCl@ss 5.1 27141118
eCl@ss 6.0 27141128
eCl@ss 7.0 27141128
eCl@ss 8.0 27141128
ETIM
ETIM 2.0 EC000900
ETIM 3.0 EC000900
ETIM 4.0 EC000900
ETIM 5.0 EC000900
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
Approvals
Approvals
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page4/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / GOST / GOST / cULus Recognized
Ex Approvals
Approvals submitted
Approval details
CSA
mm²/AWG/kcmil 28-14
Nominal current IN 15 A
Nominal voltage UN 300 V
UL Recognized
mm²/AWG/kcmil 30-14
Nominal current IN 15 A
Nominal voltage UN 300 V
cUL Recognized
mm²/AWG/kcmil 30-14
Nominal current IN 15 A
Nominal voltage UN 300 V
GOST
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page5/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Approvals
GOST
cULus Recognized
Accessories
Accessories
Bridge
Insertion bridge-EB 80- DIK RD-2715953
Insertion bridge, Number of positions:80, Color:red
Insertion bridge-EB 80- DIK BU-2715940
Insertion bridge, Number of positions:80, Color:blue
Insertion bridge-EB 10- DIK RD-2716774
Insertion bridge, Number of positions:10, Color:red
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page6/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Accessories
Insertion bridge-EB 10- DIK BU-2716680
Insertion bridge, Number of positions:10, Color:blue
Insertion bridge-EB 10- DIK GY-2715937
Insertion bridge, Number of positions:10, Color:gray
Insertion bridge-EB 80- DIK WH-2715788
Insertion bridge, Number of positions:80, Color:white
End block
End clamp-CLIPFIX 35-3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp-CLIPFIX 35-5-3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page7/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Accessories
End clamp-E/NS 35 N-0800886
End clamp, width: 9.5 mm, color: gray
End clamp-E/UK-1201442
End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail
End clamp-E/UK 1-1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Labeled terminal marker
Marker cards-SK 6,2/3,8:FORTL.ZAHLEN-0804374
Marker cards, Card, white, labeled, Horizontal:Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting
type: Adhesive, For terminal block width: 6.2 mm, Lettering field: 6.2 x 3.8 mm
Zack marker strip-ZB 6 CUS-0824992
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page8/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Accessories
Marker for terminal blocks-UC-TM 6 CUS-0824589
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks-UCT-TM 6 CUS-0829602
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Mounting rail
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail 35 mm (NS 35)
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page9/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Accessories
DIN rail-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, unperforated, Width:35 mm, Height:7.5 mm, Length:2000 mm, Color:silver
DIN rail-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page10/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Accessories
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail-NS 35/15 UNPERF 2000MM-1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail-NS 35/15 WH PERF 2000MM-0806602
DIN rail 35 mm (NS 35)
DIN rail-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail 35 mm (NS 35)
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page11/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Accessories
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail-NS 35/15 ZN PERF 2000MM-1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page12/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Accessories
DIN rail-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Partition plate
Partition plate-ATP-DIK 1,5-1413272
Partition plate, Length:65.3 mm, Width:2 mm, Height:60 mm, Color:gray
Terminal marking
Marker cards-SBS 6:UNBEDRUCKT-1007222
Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap
into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 6 x 6.1 mm
Zack marker strip-ZB 6:UNBEDRUCKT-1051003
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks-UC-TM 6-0818085
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
https://www.phoenixcontact.com/us/products/2717029
12/4/13Page13/13
Sensor/actuator terminal block-DOK 1,5-LA 24RD/O-M-2717029
Accessories
Marker for terminal blocks-UCT-TM 6-0828736
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 6.2
mm, Lettering field: 5.6 x 10.5 mm
Drawings
Circuit diagram
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com