046/47-MZ 2P 10A eng 2-03-2001 11:48 Pagina 46 Miniature Relays Series M Type MZ 2 poles 10A Monostable * * * * * * * * * Miniature size PCB mounting Reinforced insulation 4 kV / 8 mm Switching capacity 10 A DC coils 1.87 to 160 VDC AC coils 4.8 to 264 VAC General purpose, industrial electronics Types: Standard, flux-free or sealed Switching AC/DC load MZP Product Description Ordering Key H: Sealed with inert gas Sealing according to IP 67,suitaP: Standard,suitable for sol ble for automatic solde dering and manual washing. ring and/or partial immerF: Flux-free, suitable for autosion or spray washing. matic soldering and partial immersion or spray washing. Type Sealing Version (A = Standard) Contact code Coil reference number Contact rating MZ P A 200 47 10 Version A = 5.0 mm / Ag CdO (standard) C = 5.0 mm / hard gold plated D = 5.0 mm / flash gilded S = 5.0 mm / Ag Sn 02 Available only on request Ag Ni For General data, notes and special versions see page 48 Type Selection Contact configuration Contact rating Contact code 2 normally open contact (DPST -NO {2-form A}) 10 A 200 2 normally closed contact (DPST -NC {2-form B}) 10 A 020 2 change over contact DPDT {2-form C}) 10 A 002 Coil Characteristics DC Coil reference number 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 46 Rated Voltage 200/002 020 VDC VDC 2.6 4.3 5.9 8.5 10.5 13.0 17.0 21.5 23.5 27.0 34.5 42.5 54.5 68.0 87.5 101.0 115.0 132.0 2.5 4.1 5.6 8.0 10.0 12.5 16.0 20.5 22.5 26.0 32.5 40.5 51.5 64.5 83.0 95.0 109.0 125.0 (20C) Winding resistance 11 30 55 110 170 280 450 720 860 1150 1750 2700 4300 6450 9900 12550 16200 23500 % 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 Operating range Min. VDC Max.VDC 200/002 020 1.98 3.30 4.52 6.49 7.99 9.98 13.0 16.3 18.0 20.7 26.2 32.6 41.8 52.0 67.2 77.0 87.9 101.0 1.87 3.13 4.28 6.14 7.56 9.49 12.30 15.50 17.10 19.70 24.90 30.90 39.60 49.20 63.60 73.00 83.30 96.00 3.50 5.75 7.80 11.00 13.70 17.60 22.50 28.60 30.80 35.70 44.00 55;00 69.30 84.70 104.00 117.00 136.00 160.00 Must release VDC 5% of rated voltage Specifications are subject to change without notice 046/47-MZ 2P 10A eng 2-03-2001 11:49 Pagina 47 Miniature Relays Series M Type MZ 2poles 10A Monostable Coil Characteristics AC Coil ref. no. (20C) Must release Rated Current (mA) Rated Voltage Winding resistance Operating range VAC VAC 50Hz 60Hz % min. VAC Max. VAC 6 12 24 48 60 110 220 240 90 91 92 93 94 95 96 97 10 10 10 15 15 15 15 15 12 56 230 870 1500 5300 20000 25000 4.8 9.6 19.2 38.4 48.0 88.0 176.0 192.0 6.6 13.2 26.4 52.8 66.0 129.0 242.0 264.0 15% of rated voltage Inductance H 237.0 104.0 50.0 26.7 21.0 10.8 5.2 5.0 270.0 119.0 57.0 30.5 23.8 12.3 5.9 5.7 0.059 0.267 1.123 4.170 6.450 22.400 100.200 107.800 Contact Characteristics Rating 10 A Material (standard version)2) AgCdO Current (at 250VAC) Rated current Max. switching current Overload current (4sec ON / 40sec OFF cycle) 10 A 12 A 14 A Voltage Rated voltage Max.switching voltage (VDE 0435) 2) 3) Power Max. switching power with resistive load in AC 3) Max. switching power in DC Minimum switching current 2) (typical value) Life (see diagram 1) Typical electrical life at max. resistive load 1000 cycles/h 500 cycles/h Max.electrical repetition rate Mech. life at 18000 cycles/h 250 VAC 380 VAC 2500 VA see diagram 3 100mA at 24VDC 4 7.5 x 10 cycles 8 x 10 cycles 3600 cycles/h 50 x 10 cycles 4 6 See pag. 48 Dimensions Pin View MZP...200/020/002 10A 200 Wiring Diagrams 020 002 200 020 002 h h' MZP: h = 25,2 mm h'= 4,3 - 5,3 mm MZF/MZH: h = 26.5 mm h'= 2.8 - 3.8 mm Diagrams 2 Reduction of expected life against load power factor cos 3 Max. switching power DC I (Ampere) DC 1 Expected life at 250 VAC (Resistive loads and repetition rate 1000 cycles/h) Load power factor 47 Specifications are subject to change without notice V (Volt) DC Specifications are subject to change without notice 47